[Spce-user] Subscriber VM

Kurt McClean Sr. kurtsr at outlook.com
Fri Jan 22 15:48:47 EST 2016


ok, I'll get it done today and report my results
Thanks

Subject: RE: [Spce-user] Subscriber VM
Date: Fri, 22 Jan 2016 12:45:30 -0800
From: wfulton at thirdhatch.com
To: kurtsr at outlook.com; spce-user at lists.sipwise.com

You still need to do this step to assign the roles to eth0 or whatever the name of your adaptor is.  Otherwise the roles are assign to the loopback adaptor and will not work. Bill From: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Kurt McClean Sr.
Sent: Friday, January 22, 2016 12:24 PM
To: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Subscriber VM I skipped step "5.1. Network Configuration" , as it stated,  because I have only 1 NIC

Do I still need to configure as shown?Subject: RE: [Spce-user] Subscriber VM
Date: Fri, 22 Jan 2016 12:02:04 -0800
From: wfulton at thirdhatch.com
To: kurtsr at outlook.com; spce-user at lists.sipwise.comDid you perform the steps on this page:https://www.sipwise.org/doc/mr4.1.1/spce/ar01s05.html It is important that your network be configured properly first. Bill From: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Kurt McClean Sr.
Sent: Friday, January 22, 2016 11:53 AM
To: Spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Subscriber VM Its Buffalo -- Comcast Modem---Internet

For the client, I have Zoiper Softphone app on my iPhone, using the LTE ATT network

But if its also doing the same on AWS, I would think its something I don't have configured correctly.
Also, I noticed on restart that "OSSBSS" does not start, it says first need to configure "/default/ngcp-ossbss"
How is this configured? Subject: RE: [Spce-user] Subscriber VM
Date: Fri, 22 Jan 2016 09:19:55 -0800
From: wfulton at thirdhatch.com
To: kurtsr at outlook.com; spce-user at lists.sipwise.comCan you describe your client set up? I’m assuming there is another firewall involved between the internet and the spce. Something like this:  SPCE  -  Buffalo Router  -  Internet  -  Router #2  -  Client X  I’m interested in what router #2 is and what type of client you are connecting. Thanks,Bill  		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160122/335ae447/attachment-0001.html>


More information about the Spce-user mailing list