[Spce-user] New install

[Lorenzo Mangani]

Hi Leighton,

No matter what it seems, the REGISTER message carries a header causing this
issue.
If you share the REGISTER + response here sanitized we might be able to
help you further,


Kind Regards,

Lorenzo Mangani
*Managing Director and Core Dev*

QXIP BV - Capture Engineering
Amsterdam, The Netherlands

Desk: +31 20 8080468 / +1 202-632-7227
Mobile: +31 6 4603-2730
Email: info at qxip.net

Find our more about HOMER, PCAPTURE, CAPTAGENT and all our Services and
Solutions at http://qxip.net

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential or
legally privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient,
please contact
the sender by reply e-mail and destroy all copies of this original message.

On Sun, May 8, 2016 at 10:29 AM, Gmail <leightonbrennan at gmail.com> wrote:

> Hi Jonathan
> Thanks for the info.
> I am using Bria xlite client on iPhone which I have used many times before
> for other sip testing, all I have ever setup for other sip servers is
> DNS/IP address of registrar server, username and password.
>
> The DNS record is correct as using sngrep I can see the register message
> hit the spce server.
>
> Best Regards
> Leighton Brennan
>
> On 8 May 2016, at 08:41, Jonathan Yue <jonathan.yue at turboitsolutions.com>
> wrote:
>
> some sip clients have complex settings for a sip account - sip sever / sip
> proxy / domain; some only need inputs of sip server, username &
> passwords. For latter case, make sure you input the exact fqdm you set up
> as the user account's domain on spce. that fqdm must REAL, which means it
> has an A record on your dns server resolved to your spce server's IP.
>
> hope that helps.
>
> ------ Original Message ------
> From: "Gmail" <leightonbrennan at gmail.com>
> To: "Lorenzo Mangani" <lorenzo.mangani at gmail.com>
> Cc: "spce-user at lists.sipwise.com" <spce-user at lists.sipwise.com>
> Sent: 2016-05-08 12:25:04 AM
> Subject: Re: [Spce-user] New install
>
>
> Hey Lorenzo
> I probably should have a said sngrep seems to show the correct register
> message user at sip:DNSdomain whe. Using the DNS domain and also user at sip:x.x.x.x
> if I try using the IP address.
> Although I don't see the 403 response going back out to the registering
> client from sngrep.
> Thanks
>
> Best Regards
> Leighton Brennan
>
> On 7 May 2016, at 21:34, Lorenzo Mangani <lorenzo.mangani at gmail.com>
> wrote:
>
> Hi,
>
> You might want to try running sngrep on the CE box, start the client and
> see what your client is trying to register as when receiving the 403.
> Most likely it will answer the question, or provide elements to make a
> suggestion. Also try use the outbound proxy settings to doublecheck its not
> a DNS/SRV issue.
>
> Kind Regards,
>
> Lorenzo Mangani
> *Managing Director and Core Dev*
>
> QXIP BV - Capture Engineering
> Amsterdam, The Netherlands
>
> Desk: +31 20 8080468 / +1 202-632-7227
> Mobile: +31 6 4603-2730
> Email: info at qxip.net
>
> Find our more about HOMER, PCAPTURE, CAPTAGENT and all our Services and
> Solutions at http://qxip.net
>
> CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is
> for the sole use of the intended recipient(s) and may contain confidential or
> legally privileged information. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the intended recipient, please contact
> the sender by reply e-mail and destroy all copies of this original message.
>
> On Sat, May 7, 2016 at 10:20 PM, Leighton Brennan <
> leightonbrennan at gmail.com> wrote:
>
>> Hi list
>> I am new to sip wise and want to set up a test SIPwise server.
>> I have installed Debian 8 with basic installation(no desktop etc as
>> outlined in the install guide) I then ran the NGCP installer for v4.3.1 and
>> all appears to have installed correctly.
>>
>> I proceed to go through the basic config as outlined in the docs, created
>> reseller, domain, contact, account and then subscriber.
>> I assigned the domain, contact etc to the reseller that I set up, however
>> when I try to register a SIP endpoint I get a 403 domain not served here.
>> Initially I created a DNS domain so to ensure it wasn't a DNS problem I
>> created a second domain with the IP address and assigned to the same
>> reseller but still get the same error.
>> I checked the SQL data and can see that the reseller, domains etc are all
>> present. I can't seem to find a reason why the SIP registration is failing.
>>
>> I also tried running "ngcpcfg apply" to see if that would get it working
>> but no joy.
>>
>> I have not created any peerings yet but I don't think these are required
>> to test the subscriber registration.
>>
>> Any help would be appreciated.
>>
>> Leighton
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160508/5ad78ad5/attachment-0001.html>