[Spce-user] Rtpenginehardware sizing question

John Nash john.nash778 at gmail.com
Tue May 24 11:30:53 EDT 2016


I am running with log level = 2 and in /var/log/messages i do not see any
warning of kernel. I will try to run it again with higher log lel and see
what I get.
My OS is cent OS (Linux centos 2.6.32-573.7.1.el6.x86_64 ) My LAN card is
"Intel Corporation 82574L Gigabit Network Connection"

What other things I should check?


On Tue, May 24, 2016 at 6:16 PM, Andreas Granig <agranig at sipwise.com> wrote:

> Hi,
>
> Are you sure kernel mode for rtpengine is enabled and working? Check the
> logs after rtpengine startup to see if it logs a warning that kernel
> mode is disabled.
>
> Andreas
>
> On 05/24/2016 11:57 AM, John Nash wrote:
> > Thank you I will check it out. I know such questions are not easy to
> > answer so I am also doing some experiments with my customer's VOIP
> > traffic. I am running around  600 concurrent on a stand alone server
> > (CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz RAM:32 GB) but when I
> > checked CPU using top commands I got worried as CU usage and load
> > average seem to be quite high.
> >
> > top - 10:47:10 up 3 days,  8:59,  2 users,  load average: 3.44, 2.99,
> 3.43
> > Tasks: 453 total,   1 running, 452 sleeping,   0 stopped,   0 zombie
> > Cpu(s):  1.5%us,  2.7%sy,  0.0%ni, 94.7%id,  0.0%wa,  0.0%hi,  1.1%si,
> >  0.0%st
> > Mem:  32842468k total,   886396k used, 31956072k free,    98204k buffers
> > Swap:  1048572k total,        0k used,  1048572k free,   388460k cached
> >
> >   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
> >
> >
> >  3238 root      20   0 2163m  36m 1196 S 146.1  0.1   3919:05 rtpengine
> >
> >
> >     1 root      20   0 17128 1220  984 S  0.0  0.0   0:02.50 init
> >
> >
> >     2 root      20   0     0    0    0 S  0.0  0.0   0:00.01 kthreadd
> >
> >
> >     3 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0
> >
> >
> > On Tue, May 24, 2016 at 3:22 PM, Andreas Granig <agranig at sipwise.com
> > <mailto:agranig at sipwise.com>> wrote:
> >
> >     Hi,
> >
> >     There's been a talk at Kamailio World last week, see here:
> >
> >     https://www.youtube.com/watch?v=izwsE1XIc3Y
> >
> >     That might give you some insights into server dimensioning, tuning
> and
> >     scaling.
> >
> >     Andreas
> >
> >     On 05/23/2016 11:58 AM, John Nash wrote:
> >     > I need to test rtpengine with kernel module (10000 concurrent
> sessions
> >     > (IPv4 only) or more if possible. I need to arrange hardware for it
> but
> >     > not sure on what kind of CPU i should use, how much RAM it should
> have
> >     > and most critical what kind of LAN card should  I have ?...one 1
> Gbps
> >     > LAN card or multiple?....If multiple then would I need to configure
> >     > somthing at Linux level so that CPU can utilize all lan card
> >     efficiently?
> >     >
> >     > I know I am asking vague questions but opinions as per others
> >     > experiences will be very beneficial for me.
> >     >
> >     >
> >     > _______________________________________________
> >     > Spce-user mailing list
> >     > Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> >     > https://lists.sipwise.com/listinfo/spce-user
> >     >
> >     _______________________________________________
> >     Spce-user mailing list
> >     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> >     https://lists.sipwise.com/listinfo/spce-user
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160524/0f7a1b72/attachment-0001.html>


More information about the Spce-user mailing list