[Spce-user] Cisco SPA112 Configuration for SipWise

Fri Sep 9 20:59:14 EDT 2016

Hi Paul,

No problem. Actually have you used ngrep on spce to see the Register sent
by the device?

ngrep -W byline -d eth0 REGISTER

use putty then wait for a request and ctrl-c to exit

copy n paste here then do the same with zoiper.

*security note: change any external ip's from the sip message before
posting here in the list. ;)

--Skyler

On Sep 9, 2016 6:52 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:

> Hello Skyler,
>
>
>
> Really kind of you to be so helpful! At the moment I am just doing manual
> config, I see the SipWise CPBX module can provision the SPA112 but perhaps
> this is an extension for the PRO version only?
>
>
>
> I wouldn't be surprised if it's something I haven't configured properly! I
> do see the SPA112 reports External IP as just blank. Not sure if that's
> significant too.
>
>
>
> All the best,
>
>
>
> Paul (this is how I spend my Friday nights at 2 AM in little old England)!
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T:   *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Skyler <skchopperguy at gmail.com>
> *Sent:* Sat 10-09-2016 01:47
> *Subject:* Re: [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Paul Smith <paul.smith at daneco.co.uk>;
> *CC:* spce-user at lists.sipwise.com;
>
> Hi Paul,
>
> Got ya. My bad as i missed the part about zoiper working. So its clearly
> not spce config. Ok let me get home in 2 hours and i will check my nat
> settings on the 112.
>
> Are you doing http/s remote provisioning or just manual right now?
>
> --Skyler
>
> On Sep 9, 2016 6:40 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello Skyler,
>
> Thanks for that. I don't have SIP-ALG on the router and do have another
> SPA112 unit working with a 3rd party voip system. I copied the
> configuration to see if it would work but unfortunately not. My SipWise
> config works with Zoiper running behind the same router which is perhaps a
> little odd? I'm new to the soft switch World, mostly building broadband
> networks instead. I'm keen to set up my own system rather than becoming yet
> another Vonage reseller!
>
> I like things kept in house!
>
> Best wishes,
>
> Paul.
>
> Sent from a DANECO device.
>
> On 10 Sep 2016, at 1:33 am, Skyler <skchopperguy at gmail.com> wrote:
>
>
> Hi Paul,
>
> I run mr3.8 but ive done some custom config too. i actually think the
> problem could be spce configuration or your router, as this behavior
> indicates a fix_nated_contact() on Register issue more than your device.
>
> Do you have SIP-ALG enabled on your router the ata is behind? Usually thus
> setting tries to rewrite sip messages but in my experience it does not
> rewrite sdp, so maybe this is the problem.
>
> --Skyler
>
> On Sep 9, 2016 5:41 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello Skyler,
>
> Thank you for your reply. I'm running mr4.4.1 and have tried different
> combinations of settings but without joy. Would you mind sending me a
> generic copy of your configuration file so I can give it a try? I
> understand if you'd rather not.
>
> I have updated the unit to the latest version and tried the different NAT
> options. The unit does register and can make outbound calls but inbound
> aren't working. SipWise is trying to route them to the private IP by the
> look of things.
>
> Thank you again - any help is greatly appreciated.
>
> Best regards,
>
> Paul.
>
> Sent from a DANECO device.
>
> On 9 Sep 2016, at 11:00 pm, Skyler <skchopperguy at gmail.com> wrote:
>
>
> Hi Paul,
>
> what version of SPCE are you using? I have an spa112 here and working for
> me behind nat.
>
> --Skyler
>
> On Sep 9, 2016 8:58 AM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello,
>
>
>
> Further to my last e-mail, I have had Cisco support on the phone and using
> remote desktop for over an hour and they could not solve the problem!
>
>
>
> I notice that the SPA112 registers as follows:
> Cisco/SPA112-1.4.1(002) sip:xxxxxxxxxxxx at 192.168.1.60:5060
>
>
>
>
>
> Is the fact that it is registering with its LAN IP significant as I
> believe it to be? When I assign the same account to a Zoiper softphone, it
> registers with the correct external IP address. I am going to experiment
> with the SPA112 sitting directly on a public IP address and see if it
> registers with SipWise correctly.
>
>
>
> Raúl - Gemma will be in touch with those login details soon. I am hoping
> to at least get a test account running so that you can see our
> configuration and determine how much support we need!
>
>
>
> Very best of wishes,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T:   *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Paul Smith <paul.smith at daneco.co.uk>
> *Sent:* Thu 08-09-2016 19:19
> *Subject:* [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Spce-user at lists.sipwise.com;
>
> Dear All,
>
>
>
> My apologies if this subject has already been covered, but I wondered if
> someone could point me in the right direction for a working configuration
> on the Cisco SPA112?
>
>
>
> I can place outbound calls fine, but inbound are a no-go. I suspect this
> is because the SPA112 is registering with its internal IP address rather
> than that of the WAN connection. I have enabled NAT mapping and keep alive
> but this hasn't made a difference.
>
>
>
> Any help would be greatly appreciated.
>
>
>
> Thank you,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T:   *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
> _______________________________________________
>  Spce-user mailing list
>  Spce-user at lists.sipwise.com
>  https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160909/8a1ed56e/attachment-0001.html>