[Spce-user] Cisco SPA112 Configuration for SipWise
Skyler
skchopperguy at gmail.com
Fri Sep 9 23:31:20 EDT 2016
Hi Paul,
I have all defaults except these:
SIP
RTP Parameters
RTP Packet Size: 0.020
NAT Support Parameters
Handle VIA received: yes
Insert VIA received: yes
Handle VIA rport: yes
Insert VIA rport: yes
Line 1
NAT Settings
NAT Mapping Enable: yes
NAT Keep Alive Enable: yes
hope that helps.
--Skyler
On Sep 9, 2016 8:06 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
> Hello Skyler,
>
>
>
> I made some changes on the SPA112 under Voice --> SIP --> NAT Support
> Parameters. I set 'Handle VIA received', 'Insert VIA received', 'Handle VIA
> rport', and 'Insert VIA rport' all to 'yes' just out of curiosity and at
> least now the external IP address seems to be correctly listed under
> 'Registered Devices' on SipWise. Still no inbound calls however.
>
>
>
> I ran sngrep from Putty and noticed this when trying to dial in from my
> mobile:
>
>
>
>
>
> [ ] 2 OPTIONS sipsak at 127.0.0.2:7043 nagios at voip.sipwise.local
> 6 127.0.0.1:7043 127.0.0.1:5060
>
> [ ] 3 INVITE 07xxxxxx261 at 194.xxx.xxx.1 44xxxxxxx273 at 109.xxx.xx.1
> 14 109.xxx.xx.133:5060 xxx.xxx.xxx.19:5060 REJECTED
>
> [ ] 4 INVITE 07xxxxxx261 at 194.xxx.xxx.1 sipsp#44xxxxxxx273 at sip.da
> 6 127.0.0.1:5080 127.0.0.1:5060 REJECTED
>
> [ ] 5 OPTIONS sipsak at 127.0.0.2:7800 nagios at voip.sipwise.local
> 6 127.0.0.1:7800 127.0.0.1:5060
>
>
>
> I suppose the REJECTED Call States are important.
>
>
>
> If I enable call forward to voicemail for the subscriber when unavailable,
> the inbound call successfully routes to the voicemail system and I can
> leave a message.
>
>
>
> Not sure if any of this information is relevant or helpful!
>
>
>
> Thanks,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T: *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Paul Smith <paul.smith at daneco.co.uk>
> *Sent:* Sat 10-09-2016 02:26
> *Subject:* Re: [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Skyler <skchopperguy at gmail.com>;
> *CC:* spce-user at lists.sipwise.com;
>
> Hello Skyler,
>
>
>
> Here's the first copy and paste from the SPA112 Register attempts - the
> .19 address is my SipWise server and the .53 is my WAN IP address at the
> adapter end:
>
>
>
> *///////////////////////////////// BEGIN
> ///////////////////////////////////////////*
>
>
>
>
>
> REGISTER sip:xxx.daneco.co.uk SIP/2.0.
>
> Via: SIP/2.0/UDP 192.168.1.60:5060;branch=z9hG4bK-afa4f41c.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=78baee0fa0651659o0.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk>.
>
> Call-ID: a5d2d225-224d8d74 at 192.168.1.60.
>
> CSeq: 62066 REGISTER.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=3600.
>
> User-Agent: Cisco/SPA112-1.4.1(002).
>
> P-Station-Name: ;mac=5067aef193c0; display=""; sn=CCQ1948117D.
>
> Content-Length: 0.
>
> Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER.
>
> Supported: replaces.
>
> .
>
>
> ##
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:5060
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP 192.168.1.60:5060;rport=5060;received=xxx.xxx.xxx.53;
> branch=z9hG4bK-afa4f41c.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=78baee0fa0651659o0.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk>.
>
> Call-ID: a5d2d225-224d8d74 at 192.168.1.60.
>
> CSeq: 62066 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:5060
>
> SIP/2.0 401 Unauthorized.
>
> Via: SIP/2.0/UDP 192.168.1.60:5060;rport=5060;received=xxx.xxx.xxx.53;
> branch=z9hG4bK-afa4f41c.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=78baee0fa0651659o0.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=1d24a28a0bded6c40d31e6db8aab9a
> c6.7082.
>
> Call-ID: a5d2d225-224d8d74 at 192.168.1.60.
>
> CSeq: 62066 REGISTER.
>
> WWW-Authenticate: Digest realm="xxx.daneco.co.uk", nonce="V9Nd61fTXL/
> F5QuWQlq4X3A0yGY8uqx9".
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> ####
>
> U xxx.xxx.xxx.53:5060 -> xxx.xxx.xxx.19:5060
>
> REGISTER sip:xxx.daneco.co.uk SIP/2.0.
>
> Via: SIP/2.0/UDP 192.168.1.60:5060;branch=z9hG4bK-efb04e58.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=78baee0fa0651659o0.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk>.
>
> Call-ID: a5d2d225-224d8d74 at 192.168.1.60.
>
> CSeq: 62067 REGISTER.
>
> Max-Forwards: 70.
>
> Authorization: Digest username="44xxxxxxx273",realm="xxx.daneco.co.uk
> ",nonce="V9Nd61fTXL/F5QuWQlq4X3A0yGY8uqx9",uri="sip:xxx.daneco.co.uk",
> algorithm=MD5,response="e89a87f0ba8f8ed964ed21a0dfdcaa99".
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=3600.
>
> User-Agent: Cisco/SPA112-1.4.1(002).
>
> P-Station-Name: ;mac=5067aef193c0; display=""; sn=CCQ1948117D.
>
> Content-Length: 0.
>
> Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER.
>
> Supported: replaces.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:5060
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP 192.168.1.60:5060;rport=5060;received=xxx.xxx.xxx.53;
> branch=z9hG4bK-efb04e58.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=78baee0fa0651659o0.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk>.
>
> Call-ID: a5d2d225-224d8d74 at 192.168.1.60.
>
> CSeq: 62067 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:5060
>
> SIP/2.0 200 OK.
>
> Via: SIP/2.0/UDP 192.168.1.60:5060;rport=5060;received=xxx.xxx.xxx.53;
> branch=z9hG4bK-efb04e58.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=78baee0fa0651659o0.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk>;tag=1d24a28a0bded6c40d31e6db8aab9a
> c6.294a.
>
> Call-ID: a5d2d225-224d8d74 at 192.168.1.60.
>
> CSeq: 62067 REGISTER.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=2714;
> received="sip:xxx.xxx.xxx.53:5060".
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
>
> *///////////////////////////////// END
> ///////////////////////////////////////////*
>
>
>
> This time, here is the Register attempt using Zoiper:
>
>
>
> *///////////////////////////////// BEGIN
> ///////////////////////////////////////////*
>
>
>
>
>
> REGISTER sip:xxx.daneco.co.uk;transport=UDP SIP/2.0.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;branch=z9hG4bK-524287-1---
> e765160ff2244f3c;rport.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.51:46849;rinstance=
> 430fcd93ec9731c8;transport=UDP>.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 1 REGISTER.
>
> Expires: 60.
>
> User-Agent: Zoiper rd0af4c2.
>
> Allow-Events: presence, kpml, talk.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---e765160ff2244f3c;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 1 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 401 Unauthorized.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---e765160ff2244f3c;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=
> 1d24a28a0bded6c40d31e6db8aab9ac6.e6c8.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 1 REGISTER.
>
> WWW-Authenticate: Digest realm="xxx.daneco.co.uk", nonce="
> V9NgvFfTX5DxcT9wsq6jyFtei2umdYUu".
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> ###
>
> U xxx.xxx.xxx.53:46849 -> xxx.xxx.xxx.19:5060
>
> REGISTER sip:xxx.daneco.co.uk;transport=UDP SIP/2.0.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;branch=z9hG4bK-524287-1---
> 272ad1d946bb85fb;rport.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.51:46849;rinstance=
> 430fcd93ec9731c8;transport=UDP>.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 2 REGISTER.
>
> Expires: 60.
>
> User-Agent: Zoiper rd0af4c2.
>
> Authorization: Digest username="44xxxxxxx273",realm="xxx.daneco.co.uk
> ",nonce="V9NgvFfTX5DxcT9wsq6jyFtei2umdYUu",uri="sip:xxx.daneco.co.uk;
> transport=UDP",response="cacf965b924afd4b11efc8da7d649c95",algorithm=MD5.
>
> Allow-Events: presence, kpml, talk.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---272ad1d946bb85fb;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 2 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 200 OK.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---272ad1d946bb85fb;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=
> 1d24a28a0bded6c40d31e6db8aab9ac6.0eb4.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 2 REGISTER.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=1994;
> received="sip:xxx.xxx.xxx.53:5060", <sip:44xxxxxxx273 at 192.168.1.
> 51:46849;rinstance=430fcd93ec9731c8;transport=
> UDP>;expires=60;received="sip:xxx.xxx.xxx.53:46849".
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.53:46849 -> xxx.xxx.xxx.19:5060
>
> REGISTER sip:xxx.daneco.co.uk;transport=UDP SIP/2.0.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;branch=z9hG4bK-524287-1---
> 425efb31184f4d94;rport.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.51:46849;rinstance=
> 430fcd93ec9731c8;transport=UDP>;expires=0;received="sip:
> xxx.xxx.xxx.53:46849".
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 3 REGISTER.
>
> User-Agent: Zoiper rd0af4c2.
>
> Authorization: Digest username="44xxxxxxx273",realm="xxx.daneco.co.uk
> ",nonce="V9NgvFfTX5DxcT9wsq6jyFtei2umdYUu",uri="sip:xxx.daneco.co.uk;
> transport=UDP",response="cacf965b924afd4b11efc8da7d649c95",algorithm=MD5.
>
> Allow-Events: presence, kpml, talk.
>
> Content-Length: 0.
>
> .
>
>
> ##
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---425efb31184f4d94;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 3 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 200 OK.
>
> Via: SIP/2.0/UDP 192.168.1.51:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---425efb31184f4d94;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=
> 1d24a28a0bded6c40d31e6db8aab9ac6.6d9d.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=a596987f.
>
> Call-ID: jYLwbp53jbA2FMEOorPY9Q...
>
> CSeq: 3 REGISTER.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=1994;
> received="sip:xxx.xxx.xxx.53:5060".
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> ##
>
> U xxx.xxx.xxx.53:46849 -> xxx.xxx.xxx.19:5060
>
> REGISTER sip:xxx.daneco.co.uk;transport=UDP SIP/2.0.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;branch=z9hG4bK-524287-1---
> 97834a4804611bf6;rport.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at xxx.xxx.xxx.53:46849;transport=UDP;
> rinstance=72db80700d9ac55b>.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 1 REGISTER.
>
> Expires: 60.
>
> User-Agent: Zoiper rd0af4c2.
>
> Allow-Events: presence, kpml, talk.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---97834a4804611bf6;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 1 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 401 Unauthorized.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---97834a4804611bf6;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=
> 1d24a28a0bded6c40d31e6db8aab9ac6.463d.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 1 REGISTER.
>
> WWW-Authenticate: Digest realm="xxx.daneco.co.uk", nonce="
> V9NgvFfTX5DxcT9wsq6jyFtei2umdYUu".
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.53:46849 -> xxx.xxx.xxx.19:5060
>
> REGISTER sip:xxx.daneco.co.uk;transport=UDP SIP/2.0.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;branch=z9hG4bK-524287-1---
> b0cf2ab4523fa986;rport.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at xxx.xxx.xxx.53:46849;transport=UDP;
> rinstance=72db80700d9ac55b>.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 2 REGISTER.
>
> Expires: 60.
>
> User-Agent: Zoiper rd0af4c2.
>
> Authorization: Digest username="44xxxxxxx273",realm="xxx.daneco.co.uk
> ",nonce="V9NgvFfTX5DxcT9wsq6jyFtei2umdYUu",uri="sip:xxx.daneco.co.uk;
> transport=UDP",response="cacf965b924afd4b11efc8da7d649c95",algorithm=MD5.
>
> Allow-Events: presence, kpml, talk.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---b0cf2ab4523fa986;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 2 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> ###
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 200 OK.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---b0cf2ab4523fa986;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=
> 1d24a28a0bded6c40d31e6db8aab9ac6.8fb0.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 2 REGISTER.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=1994;
> received="sip:xxx.xxx.xxx.53:5060", <sip:44xxxxxxx273 at xxx.xxx.xxx.
> 53:46849;transport=UDP;rinstance=72db80700d9ac55b>;expires=60.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> ####################################
>
> U xxx.xxx.xxx.53:46849 -> xxx.xxx.xxx.19:5060
>
> REGISTER sip:xxx.daneco.co.uk;transport=UDP SIP/2.0.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;branch=z9hG4bK-524287-1---
> c64acd23d6325fa6;rport.
>
> Max-Forwards: 70.
>
> Contact: <sip:44xxxxxxx273 at xxx.xxx.xxx.53:46849;transport=UDP;
> rinstance=72db80700d9ac55b>.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 3 REGISTER.
>
> Expires: 60.
>
> User-Agent: Zoiper rd0af4c2.
>
> Authorization: Digest username="44xxxxxxx273",realm="xxx.daneco.co.uk
> ",nonce="V9NgvFfTX5DxcT9wsq6jyFtei2umdYUu",uri="sip:xxx.daneco.co.uk;
> transport=UDP",response="cacf965b924afd4b11efc8da7d649c95",algorithm=MD5.
>
> Allow-Events: presence, kpml, talk.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 100 Trying.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---c64acd23d6325fa6;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 3 REGISTER.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
> #
>
> U xxx.xxx.xxx.19:5060 -> xxx.xxx.xxx.53:46849
>
> SIP/2.0 200 OK.
>
> Via: SIP/2.0/UDP xxx.xxx.xxx.53:46849;received=
> xxx.xxx.xxx.53;branch=z9hG4bK-524287-1---c64acd23d6325fa6;rport=46849.
>
> To: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=
> 1d24a28a0bded6c40d31e6db8aab9ac6.a59e.
>
> From: <sip:44xxxxxxx273 at xxx.daneco.co.uk;transport=UDP>;tag=b558be15.
>
> Call-ID: ACXMskCp2k2Ma9VqPIrlpg...
>
> CSeq: 3 REGISTER.
>
> Contact: <sip:44xxxxxxx273 at 192.168.1.60:5060>;expires=1992;
> received="sip:xxx.xxx.xxx.53:5060", <sip:44xxxxxxx273 at xxx.xxx.xxx.
> 53:46849;transport=UDP;rinstance=72db80700d9ac55b>;expires=60.
>
> Server: Sipwise NGCP Proxy 4.X.
>
> Content-Length: 0.
>
> .
>
>
>
> *///////////////////////////////// END
> ///////////////////////////////////////////*
>
>
>
>
>
> I hope I haven't obscured useful information.
>
>
>
> Best regards,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T: *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Skyler <skchopperguy at gmail.com>
> *Sent:* Sat 10-09-2016 01:59
> *Subject:* RE: [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Paul Smith <paul.smith at daneco.co.uk>;
> *CC:* spce-user at lists.sipwise.com;
>
> Hi Paul,
>
> No problem. Actually have you used ngrep on spce to see the Register sent
> by the device?
>
> ngrep -W byline -d eth0 REGISTER
>
> use putty then wait for a request and ctrl-c to exit
>
> copy n paste here then do the same with zoiper.
>
> *security note: change any external ip's from the sip message before
> posting here in the list. ;)
>
> --Skyler
>
> On Sep 9, 2016 6:52 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello Skyler,
>
>
>
> Really kind of you to be so helpful! At the moment I am just doing manual
> config, I see the SipWise CPBX module can provision the SPA112 but perhaps
> this is an extension for the PRO version only?
>
>
>
> I wouldn't be surprised if it's something I haven't configured properly! I
> do see the SPA112 reports External IP as just blank. Not sure if that's
> significant too.
>
>
>
> All the best,
>
>
>
> Paul (this is how I spend my Friday nights at 2 AM in little old England)!
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T: *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Skyler <skchopperguy at gmail.com>
> *Sent:* Sat 10-09-2016 01:47
> *Subject:* Re: [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Paul Smith <paul.smith at daneco.co.uk>;
> *CC:* spce-user at lists.sipwise.com;
>
> Hi Paul,
>
> Got ya. My bad as i missed the part about zoiper working. So its clearly
> not spce config. Ok let me get home in 2 hours and i will check my nat
> settings on the 112.
>
> Are you doing http/s remote provisioning or just manual right now?
>
> --Skyler
>
> On Sep 9, 2016 6:40 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello Skyler,
>
> Thanks for that. I don't have SIP-ALG on the router and do have another
> SPA112 unit working with a 3rd party voip system. I copied the
> configuration to see if it would work but unfortunately not. My SipWise
> config works with Zoiper running behind the same router which is perhaps a
> little odd? I'm new to the soft switch World, mostly building broadband
> networks instead. I'm keen to set up my own system rather than becoming yet
> another Vonage reseller!
>
> I like things kept in house!
>
> Best wishes,
>
> Paul.
>
> Sent from a DANECO device.
>
> On 10 Sep 2016, at 1:33 am, Skyler <skchopperguy at gmail.com> wrote:
>
>
> Hi Paul,
>
> I run mr3.8 but ive done some custom config too. i actually think the
> problem could be spce configuration or your router, as this behavior
> indicates a fix_nated_contact() on Register issue more than your device.
>
> Do you have SIP-ALG enabled on your router the ata is behind? Usually thus
> setting tries to rewrite sip messages but in my experience it does not
> rewrite sdp, so maybe this is the problem.
>
> --Skyler
>
> On Sep 9, 2016 5:41 PM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello Skyler,
>
> Thank you for your reply. I'm running mr4.4.1 and have tried different
> combinations of settings but without joy. Would you mind sending me a
> generic copy of your configuration file so I can give it a try? I
> understand if you'd rather not.
>
> I have updated the unit to the latest version and tried the different NAT
> options. The unit does register and can make outbound calls but inbound
> aren't working. SipWise is trying to route them to the private IP by the
> look of things.
>
> Thank you again - any help is greatly appreciated.
>
> Best regards,
>
> Paul.
>
> Sent from a DANECO device.
>
> On 9 Sep 2016, at 11:00 pm, Skyler <skchopperguy at gmail.com> wrote:
>
>
> Hi Paul,
>
> what version of SPCE are you using? I have an spa112 here and working for
> me behind nat.
>
> --Skyler
>
> On Sep 9, 2016 8:58 AM, "Paul Smith" <paul.smith at daneco.co.uk> wrote:
>
> Hello,
>
>
>
> Further to my last e-mail, I have had Cisco support on the phone and using
> remote desktop for over an hour and they could not solve the problem!
>
>
>
> I notice that the SPA112 registers as follows:
> Cisco/SPA112-1.4.1(002) sip:xxxxxxxxxxxx at 192.168.1.60:5060
>
>
>
>
>
> Is the fact that it is registering with its LAN IP significant as I
> believe it to be? When I assign the same account to a Zoiper softphone, it
> registers with the correct external IP address. I am going to experiment
> with the SPA112 sitting directly on a public IP address and see if it
> registers with SipWise correctly.
>
>
>
> Raúl - Gemma will be in touch with those login details soon. I am hoping
> to at least get a test account running so that you can see our
> configuration and determine how much support we need!
>
>
>
> Very best of wishes,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T: *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
>
>
> -----Original message-----
> *From:* Paul Smith <paul.smith at daneco.co.uk>
> *Sent:* Thu 08-09-2016 19:19
> *Subject:* [Spce-user] Cisco SPA112 Configuration for SipWise
> *To:* Spce-user at lists.sipwise.com;
>
> Dear All,
>
>
>
> My apologies if this subject has already been covered, but I wondered if
> someone could point me in the right direction for a working configuration
> on the Cisco SPA112?
>
>
>
> I can place outbound calls fine, but inbound are a no-go. I suspect this
> is because the SPA112 is registering with its internal IP address rather
> than that of the WAN connection. I have enabled NAT mapping and keep alive
> but this hasn't made a difference.
>
>
>
> Any help would be greatly appreciated.
>
>
>
> Thank you,
>
>
>
> Paul.
>
>
>
> --
>
>
> *Paul R. Smith B.Sc. (Hons.)*
>
> Managing Director
>
> Data Network Consultants Limited
>
>
>
> *T: *01207 750 550
>
> *W: *www.daneco.co.uk
>
>
>
> [image: DANECO Logo]
>
>
>
> *iNorthumberland's Fixed Wireless Access Partner - Superfast Wireless
> Network Specialists.*
>
>
>
> DANECO is a trading name of Data Network Consultants Limited.
>
>
>
> Company Reg. No: 06769055
> Registered in England and Wales.
>
>
>
> This email and its contents are confidential and intended for the
> addressee only. It may not be disclosed to or used by anyone else nor may
> it be copied in any way. Data Network Consultants Limited nor the sender
> accepts any responsibility for viruses and it is the addressee's
> responsibility to check attachments if any. Any opinions expressed in this
> email are those of the sender and not necessarily those of Data Network
> Consultants Limited. If received in error please contact the sender to
> advise then delete from your system.
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20160909/026eea6b/attachment-0001.html>
More information about the Spce-user
mailing list