[Spce-user] Can not Install sipwise on debian 8.6

[Walter Klomp]

Because your sip_ext is on eth0 … it will always use that interface.



> On 20 Jan 2017, at 5:22 PM, Cedric Le <cedric at hoiio.com> wrote:
> 
> Hi Team,
> 
> May i know how to create route and change the route. We are facing with issue can not make out going call. We are peering with ip on 172.16.19.10 and it connect to eth1 but It alway use the route on eth0, did not use eth1. 
> 
>  eth0:
>       ip: 172.16.16.111
>       netmask: 255.255.255.0
>       type:
>         - web_ext
>         - ssh_ext
>         - sip_ext
>         - rtp_ext
>         - sip_int
>         - rtp_int
>         - web_int
>     eth1:
>       ip: 172.16.19.57
>       netmask: 255.255.255.0
>       type:
>         - web_ext
>         - web_int
>         - mon_ext
> 
> 
> Trunk to peer with ip 172.16.19.10
> 
> 
> INVITE sip:01677140640 at 172.16.19.10:5060;transport=udp SIP/2.0'
> Via: SIP/2.0/UDP 172.16.16.111:5080;branch=z9hG4bKSj2LNadd;rport'
> From: <sip:84901774554 at 172.16.16.111 <mailto:sip%3A84901774554 at 172.16.16.111>>;tag=00A97DAD-5881D5E30005651A-50A10700'
> To: <sip:01677140640 at 172.16.19.10 <mailto:sip%3A01677140640 at 172.16.19.10>>'
> CSeq: 10 INVITE'
> Call-ID: NjhmYTBhZDEwYThjODY4MDdkMmI0YTZkZDMyMjMwNGI._b2b-1'
> Route: <sip:172.16.16.111:5060;received='sip:172.16.19.10:5060;lr;transport=udp';lr>'
> Max-Forwards: 70'
> Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, MESSAGE, OPTIONS, SUBSCRIBE'
> Supported: replaces, norefersub, extended-refer, X-cisco-serviceuri'
> P-Asserted-Identity: <sip:84901774554 at 172.16.16.111 <mailto:sip%3A84901774554 at 172.16.16.111>>'
> P-D-Uri: sip:172.16.16.111:5060;received='sip:172.16.19.10:5060;lr;transport=udp''
> Content-Type: application/sdp'
> Contact: <sip:172.16.16.111:5080;transport=udp>'
> Content-Length: 287'
> '
> v=0'
> o=Z 0 0 IN IP4 192.168.1.52'
> s=Z'
> c=IN IP4 203.205.28.49'
> t=0 0'
> m=audio 8000 RTP/AVP 3 110 8 0 98 101'
> a=rtpmap:110 speex/8000'
> a=rtpmap:98 iLBC/8000'
> a=fmtp:98 mode=20'
> a=rtpmap:101 telephone-event/8000'
> a=fmtp:101 0-15'
> a=sendrecv'
> a=oldmediaip:192.168.1.52'
> a=direction:active'
> 
> 
> On Thu, Jan 19, 2017 at 9:34 PM, Alex Lutay <alutay at sipwise.com <mailto:alutay at sipwise.com>> wrote:
> Hi,
> 
> I do not see anything which can cause such error.
> Is it still topical? Do you use proxy?
> 
> P.S. Can you please send logs in plain-text next time,
> it simplifies quoting. Thank you!
> 
> On 01/10/2017 03:50 AM, Cedric Le wrote:
> > We are facing with another problem. Please help to advise
> 
> --
> Alex Lutay
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
> 
> 
> 
> -- 
> Thanks and Regard,
> Cedric Le
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20170120/4686e560/attachment-0001.html>