[Spce-user] SIp header "Date"

[Andrew Pogrebennyk]

Hi Sven,
in order to relay this header, you need to add it to the SEMS header
whitelist. For this, go into
/etc/ngcp-config/templates/etc/ngcp-sems/etc, copy
ngcp.sbcprofile.conf.tt2 to ngcp.sbcprofile.conf.customtt.tt2 and edit
the latter by adding Date at the end of header_list line. Repeat the
same with ngcp_cf.sbcprofile.conf.tt2. Execute ngcpcfg apply and re-test.

Hope this helps,
Andrew

Sven Van Gorp wrote:
> Hello all,
> 
> Using spce 3.8.9 and having a problem with the "Date" header in the INVITE
> 
> Some SIP clients use this Date header to form the time and date in the
> analogue CLIP on the RJ11. (ZTE e.g.)
> 
> I see that from the carrier the Date header is present, and the LD sends
> the Date header to the proxy, but then leaving the Proxy the Date header
> is gone.
> 
> Also from some other SIP endpoints there si NO date header.
> 
> Question is if Sip Provider  can:
> 
> A. Relay this Date header?
> B. Add the header if not available?
> 
> thanks