From skipot at sipwise.com  Fri Nov  3 06:50:07 2017
From: skipot at sipwise.com (sergii kipot)
Date: Fri, 3 Nov 2017 11:50:07 +0100
Subject: [Spce-user] New sip:provider CE mr5.5.1 is now available
Message-ID: <dbc6a916-9b73-498d-02c2-ba95d569963a@sipwise.com>

Dear community!

This is to inform you about the availability of the new SPCE mr5.5.1 !

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images have
been uploaded, please check the handbook for all the details:
https://www.sipwise.org/doc/mr5.5.1/spce/ar01s04.html

Please find the list of all changes on our web site:
https://www.sipwise.org/news/announcements/sipprovider-mr5-5-1-released/
//The release mr5.5 is official LTS release. It will be supported till Oct 31, 2020//
Please report issues if any on this mailing list and thank you for being a part of the community!


-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171103/1d4847ce/attachment.html>

From stefanormc at gmail.com  Sat Nov  4 12:13:47 2017
From: stefanormc at gmail.com (stefanormc)
Date: Sat, 4 Nov 2017 12:13:47 -0400
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
Message-ID: <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171104/c6305c8d/attachment.html>

From henk at voipdigit.nl  Sat Nov  4 15:55:06 2017
From: henk at voipdigit.nl (Henk)
Date: Sat, 4 Nov 2017 20:55:06 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
Message-ID: <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>

Hi Stefano,

I had the same problem when I made a connection to an authorization 
domain which was not the same as the server address. In some clients you 
have to use the proxy setting to specify the server address. The 
kamailio proxy checks the domain against the known domains (domain table 
in the kamailio db). I solved this by adding the proxy domain in SPCE. 
Hope this helps for you too.

Regards,

Henk Plessius


On 4-11-2017 17:13, stefanormc wrote:
> Hello again,
>
> Anyone?? No ideas?
>
> I?m stuck
>
> Thanks
>
> Ciao
>
> Stefano
>
>
>
> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
> <mailto:stefanormc at gmail.com>) wrote:
>
>>
>> Hi all,
>>
>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>> problem on outbound calls from certain clients that are correctly 
>> registered and have no problem on inbound calls.
>>
>> This what I see in spce log:
>>
>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request 
>> on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>> F=sip:0119649202 at voceblu.it 
>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>> T=sip:0110133301 at voceblu.it 
>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone IP=172.26.4.92:1024 
>> <http://172.26.4.92:1024> (127.0.0.1:5060 <http://127.0.0.1:5060>) 
>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2'
>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>
>> Outbound calls worked fine before upgrading
>>
>> Any hint where the problem might lie?
>>
>> Thanks
>>
>> stefano
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171104/831d876e/attachment.html>

From stefanormc at gmail.com  Sun Nov  5 13:31:20 2017
From: stefanormc at gmail.com (stefanormc)
Date: Sun, 5 Nov 2017 13:31:20 -0500
Subject: [Spce-user] loose-routing
In-Reply-To: <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
Message-ID: <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>

Hi Henk,

I?m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171105/6124b4d4/attachment.html>

From henk at voipdigit.nl  Sun Nov  5 15:29:55 2017
From: henk at voipdigit.nl (Henk)
Date: Sun, 5 Nov 2017 21:29:55 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
Message-ID: <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>

Hi Stefano,

I had to add the DNS name of my server to SPCE as a dummy domain to stop 
the loose-routing error. But if I look at your log, it seems you are 
using _voceblu.it_ and not geva.voceblu.it.
<http://geva.voceblu.it>Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if 
the destination uri domain is local, if this fails it produces the 
loose-route error:

         if(!has_totag())
         {
             if($du != $null && _*is_domain_local("$dd")*_)
             {
                 xlog("L_INFO", "Reset initial local route - R=$ru 
ID=$ci UA='$ua'\n");
                 $du = $null;
             }
             else
             {
                 xlog("L_NOTICE", "_*Initial loose-routing rejected*_ - 
R=$ru ID=$ci UA='$ua'\n");
                 sl_send_reply("403", "Initial Loose-Routing Forbidden");
                 exit;
             }
         }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:
> Hi Henk,
>
> I?m no too sure what you mean. What proxy domain do you refer to?
>
> In my case, user is XXXXX at geva.voceblu.it 
> <mailto:XXXXX at geva.voceblu.it> and I have geva.voceblu.it 
> <http://geva.voceblu.it> realm configured
>
> Proxy is centrale.aXXXXXXti.it <http://centrale.aXXXXXXti.it> that 
> seems to be correctly configured on the Grandstream ATA
>
> Thanks
>
> ciao
>
> Stefano
>
> On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl 
> <mailto:henk at voipdigit.nl>) wrote:
>
>> Hi Stefano,
>>
>> I had the same problem when I made a connection to an authorization 
>> domain which was not the same as the server address. In some clients 
>> you have to use the proxy setting to specify the server address. The 
>> kamailio proxy checks the domain against the known domains (domain 
>> table in the kamailio db). I solved this by adding the proxy domain 
>> in SPCE. Hope this helps for you too.
>>
>> Regards,
>>
>> Henk Plessius
>>
>>
>> On 4-11-2017 17:13, stefanormc wrote:
>>> Hello again,
>>>
>>> Anyone?? No ideas?
>>>
>>> I?m stuck
>>>
>>> Thanks
>>>
>>> Ciao
>>>
>>> Stefano
>>>
>>>
>>>
>>> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
>>> <mailto:stefanormc at gmail.com>) wrote:
>>>
>>>>
>>>> Hi all,
>>>>
>>>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>>>> problem on outbound calls from certain clients that are correctly 
>>>> registered and have no problem on inbound calls.
>>>>
>>>> This what I see in spce log:
>>>>
>>>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request 
>>>> on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>> F=sip:0119649202 at voceblu.it 
>>>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>>>> T=sip:0110133301 at voceblu.it 
>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone IP=172.26.4.92:1024 
>>>> <http://172.26.4.92:1024> (127.0.0.1:5060 <http://127.0.0.1:5060>) 
>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2'
>>>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>>>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>>>
>>>> Outbound calls worked fine before upgrading
>>>>
>>>> Any hint where the problem might lie?
>>>>
>>>> Thanks
>>>>
>>>> stefano
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171105/b21746f6/attachment.html>

From stephen at belzonicable.net  Sun Nov  5 23:44:56 2017
From: stephen at belzonicable.net (Stephen Donovan)
Date: Sun, 5 Nov 2017 22:44:56 -0600 (CST)
Subject: [Spce-user] spce 2.8 rtpproxy seems to not work.
Message-ID: <2028531298.6918.1509943496867.JavaMail.zimbra@belzonicable.net>

Customer complaining of calls with no audio/one way audio. Upon investigation, Even though rtp proxy is enabled on the account, I'm seeing media from many different ip addresses. since the endpoint is behind a VPN with private addressing and NAT, that seems to be the cause of the broken audio. Is there anything in particular I should look for to diagnose and repair the problem? I have another spce 2.8 vm that does not have this issue. 



_______________________________ 
Stephen Donovan 
Owner 
Belzoni Cable, LLC 
SIP Solutions, LLC 
16014 US Hwy 49 
Belzoni, MS 39038 
662-247-3502 direct 
stephen at belzonicable.net 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171105/c5f81cce/attachment.html>

From dgrotti at sipwise.com  Mon Nov  6 03:43:42 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 09:43:42 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
Message-ID: <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing 
is the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:
>
> Hi Stefano,
>
> I had to add the DNS name of my server to SPCE as a dummy domain to 
> stop the loose-routing error. But if I look at your log, it seems you 
> are using _voceblu.it_ and not geva.voceblu.it.
> <http://geva.voceblu.it>Are both domains existing in SPCE?
>
>
> In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see 
> if the destination uri domain is local, if this fails it produces the 
> loose-route error:
>
> ??? ??? if(!has_totag())
> ??? ??? {
> ??? ??? ??? if($du != $null && _*is_domain_local("$dd")*_)
> ??? ??? ??? {
> ??? ??? ??? ??? xlog("L_INFO", "Reset initial local route - R=$ru 
> ID=$ci UA='$ua'\n");
> ??? ??? ??? ??? $du = $null;
> ??? ??? ??? }
> ??? ??? ??? else
> ??? ??? ??? {
> ??? ??? ??? ??? xlog("L_NOTICE", "_*Initial loose-routing rejected*_ - 
> R=$ru ID=$ci UA='$ua'\n");
> ??? ??? ??? ??? sl_send_reply("403", "Initial Loose-Routing Forbidden");
> ??? ??? ??? ??? exit;
> ??? ??? ??? }
> ??? ??? }
>
> Hope this helps,
>
> Regards,
>
> Henk Plessius
>
> On 5-11-2017 19:31, stefanormc wrote:
>> Hi Henk,
>>
>> I?m no too sure what you mean. What proxy domain do you refer to?
>>
>> In my case, user is XXXXX at geva.voceblu.it 
>> <mailto:XXXXX at geva.voceblu.it>?and I have geva.voceblu.it 
>> <http://geva.voceblu.it> realm configured
>>
>> Proxy is centrale.aXXXXXXti.it <http://centrale.aXXXXXXti.it>?that 
>> seems to be correctly configured on the Grandstream ATA
>>
>> Thanks
>>
>> ciao
>>
>> Stefano
>>
>> On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl 
>> <mailto:henk at voipdigit.nl>) wrote:
>>
>>> Hi Stefano,
>>>
>>> I had the same problem when I made a connection to an authorization 
>>> domain which was not the same as the server address. In some clients 
>>> you have to use the proxy setting to specify the server address. The 
>>> kamailio proxy checks the domain against the known domains (domain 
>>> table in the kamailio db). I solved this by adding the proxy domain 
>>> in SPCE. Hope this helps for you too.
>>>
>>> Regards,
>>>
>>> Henk Plessius
>>>
>>>
>>> On 4-11-2017 17:13, stefanormc wrote:
>>>> Hello again,
>>>>
>>>> Anyone?? No ideas?
>>>>
>>>> I?m stuck
>>>>
>>>> Thanks
>>>>
>>>> Ciao
>>>>
>>>> Stefano
>>>>
>>>>
>>>>
>>>> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
>>>> <mailto:stefanormc at gmail.com>) wrote:
>>>>
>>>>>
>>>>> Hi all,
>>>>>
>>>>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>>>>> problem on outbound calls from certain clients that are correctly 
>>>>> registered and have no problem on inbound calls.
>>>>>
>>>>> This what I see in spce log:
>>>>>
>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New 
>>>>> request on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>> F=sip:0119649202 at voceblu.it 
>>>>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>>>>> T=sip:0110133301 at voceblu.it 
>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>> IP=172.26.4.92:1024 <http://172.26.4.92:1024> (127.0.0.1:5060 
>>>>> <http://127.0.0.1:5060>) ID=1052434700-5060-11 at BJC.BGI.B.H 
>>>>> UA='Grandstream HT701 1.0.8.2'
>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>>>>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>>>>
>>>>> Outbound calls worked fine before upgrading
>>>>>
>>>>> Any hint where the problem might lie?
>>>>>
>>>>> Thanks
>>>>>
>>>>> stefano
>>>>
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/08e59610/attachment.html>

From alutay at sipwise.com  Mon Nov  6 04:00:03 2017
From: alutay at sipwise.com (Alex Lutay)
Date: Mon, 6 Nov 2017 10:00:03 +0100
Subject: [Spce-user] spce 2.8 rtpproxy seems to not work.
In-Reply-To: <2028531298.6918.1509943496867.JavaMail.zimbra@belzonicable.net>
References: <2028531298.6918.1509943496867.JavaMail.zimbra@belzonicable.net>
Message-ID: <79fd6c6e-ff06-0056-aa9e-059e0a0d691d@sipwise.com>

Hi,

I am strongly believe it is a local configuration issue,
as 2.8 is not being touched/supported for a year(s).

Please consider to upgrade to the modern supported releases,
the latest LTS release is mr5.5

Release 2.8 based on Debian Squeeze which contains long list of
known security issues for a bunch of components.

On 11/06/2017 05:44 AM, Stephen Donovan wrote:
> Upon investigation, Even though rtp proxy is enabled on the account, I'm
> seeing media from many different ip addresses.? since the endpoint is
> behind a VPN with private addressing and NAT, that seems to be the cause
> of the broken audio.? Is there anything in particular I should look for
> to diagnose and repair the problem?? I have another spce 2.8 vm that
> does not have this issue.

-- 
Alex Lutay


From stefanormc at gmail.com  Mon Nov  6 04:04:39 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 01:04:39 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
Message-ID: <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>

I have both domains configured, one is a reseller.
There are approx 100 subscribers working on each domain but they are both
giving the same error on the same device, a grandstream ht701 ATA

if by local domain you mean configured under ?domains? in spce, then they
both are. I have not configured the dns proxy name as suggested by Henk
yet. I?ll try that today.

#ResellerDomain
6 PSA voceblu.it
7 G-Eva geva.voceblu.it


thanks

ciao

stefano


Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing is
the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:

Hi Stefano,
I had to add the DNS name of my server to SPCE as a dummy domain to stop
the loose-routing error. But if I look at your log, it seems you are
using *voceblu.it
<http://voceblu.it>* and not geva.voceblu.it.
<http://geva.voceblu.it> Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if the
destination uri domain is local, if this fails it produces the loose-route
error:

        if(!has_totag())
        {
            if($du != $null && *is_domain_local("$dd")*)
            {
                xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci
UA='$ua'\n");
                $du = $null;
            }
            else
            {
                xlog("L_NOTICE", "*Initial loose-routing rejected* - R=$ru
ID=$ci UA='$ua'\n");
                sl_send_reply("403", "Initial Loose-Routing Forbidden");
                exit;
            }
        }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:

Hi Henk,

I?m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user




_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/d27d10aa/attachment.html>

From alutay at sipwise.com  Mon Nov  6 04:47:23 2017
From: alutay at sipwise.com (Alex Lutay)
Date: Mon, 6 Nov 2017 10:47:23 +0100
Subject: [Spce-user] connect sipwise in the cloud
In-Reply-To: <CAPR5FSi2PU7aY=ZbNBVrzTCTxEZt7vDmvK=LNvxwbVhfhA_dpg@mail.gmail.com>
References: <CAPR5FSi2PU7aY=ZbNBVrzTCTxEZt7vDmvK=LNvxwbVhfhA_dpg@mail.gmail.com>
Message-ID: <de198759-be47-ef72-69f9-cc274bc67586@sipwise.com>

Hi,

It is not clear from this side what you are trying to achieve and
which issues you have noticed. Can you please share more details here?

Tnx!

On 10/31/2017 03:18 PM, moises rosas wrote:
> Hi. I'm trying to connect the sipwise to the cloud, but I do not have
> much information on how to do it, thanks in advance.

-- 
Alex Lutay



From stefanormc at gmail.com  Mon Nov  6 05:15:03 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 02:15:03 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
Message-ID: <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>

I added the dns name in the domains section but still getting the same
problem:

Nov  6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0322259098 at c.voceblu.it F=sip:0119084086 at c.voceblu.it
T=sip:0322259098 at c.voceblu.it IP=178.255.188.147:58296 (127.0.0.1:5060)
ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'

Nov  6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:centrale03.avanzati.it
ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'

this is a different customer with a Gigaset PBX with a PJSIP trunk
c.voceblu.it is a valid local domain as well as centrale03.avanzati.it

What happens if I disable that part of the script?



Il giorno 6 novembre 2017 @ 10:04:39, stefanormc (stefanormc at gmail.com) ha
scritto:

I have both domains configured, one is a reseller.
There are approx 100 subscribers working on each domain but they are both
giving the same error on the same device, a grandstream ht701 ATA

if by local domain you mean configured under ?domains? in spce, then they
both are. I have not configured the dns proxy name as suggested by Henk
yet. I?ll try that today.

# Reseller Domain
6 PSA voceblu.it
7 G-Eva geva.voceblu.it


thanks

ciao

stefano


Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing is
the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:

Hi Stefano,
I had to add the DNS name of my server to SPCE as a dummy domain to stop
the loose-routing error. But if I look at your log, it seems you are
using *voceblu.it
<http://voceblu.it>* and not geva.voceblu.it.
<http://geva.voceblu.it> Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if the
destination uri domain is local, if this fails it produces the loose-route
error:

        if(!has_totag())
        {
            if($du != $null && *is_domain_local("$dd")*)
            {
                xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci
UA='$ua'\n");
                $du = $null;
            }
            else
            {
                xlog("L_NOTICE", "*Initial loose-routing rejected* - R=$ru
ID=$ci UA='$ua'\n");
                sl_send_reply("403", "Initial Loose-Routing Forbidden");
                exit;
            }
        }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:

Hi Henk,

I?m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user




_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/7c1f6119/attachment.html>

From dgrotti at sipwise.com  Mon Nov  6 05:18:39 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 11:18:39 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
Message-ID: <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>

Hi Stefano,
what is "c.voceblu.it" ?
This is not part of your domain, or ?
Also, can you kindly post the output from the following commands:

1) mysql> select * from kamailio.domain;
2) # ngcp-kamctl proxy fifo domain_dump


Thanks,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:15 AM, stefanormc wrote:
> I added the dns name in the domains section but still getting the same 
> problem:
>
> Nov? 6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: New request 
> on proxy - M=INVITE R=sip:0322259098 at c.voceblu.it 
> <mailto:sip%3A0322259098 at c.voceblu.it> F=sip:0119084086 at c.voceblu.it 
> <mailto:sip%3A0119084086 at c.voceblu.it> T=sip:0322259098 at c.voceblu.it 
> <mailto:sip%3A0322259098 at c.voceblu.it> IP=178.255.188.147:58296 
> <http://178.255.188.147:58296> (127.0.0.1:5060 
> <http://127.0.0.1:5060>) ID=418017e2-baee-4baa-9e60-13e95ebc6f5b 
> UA='Gigaset T440/T640'
>
> Nov? 6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: Initial 
> loose-routing rejected - R=sip:centrale03.avanzati.it 
> <http://centrale03.avanzati.it> 
> ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'
>
>
> this is a different customer with a Gigaset PBX with a PJSIP trunk
> c.voceblu.it <http://c.voceblu.it>?is a valid local domain as well as 
> centrale03.avanzati.it <http://centrale03.avanzati.it>
>
> What happens if I disable that part of the script?
>
>
>
> Il giorno 6 novembre 2017 @ 10:04:39, stefanormc (stefanormc at gmail.com 
> <mailto:stefanormc at gmail.com>) ha scritto:
>
>> I have both domains configured, one is a reseller.
>> There are approx 100 subscribers working on each domain but they are 
>> both giving the same error on the same device, a grandstream ht701 ATA
>>
>> if by local domain you mean configured under ?domains? in spce, then 
>> they both are. I have not configured the dns proxy name as suggested 
>> by Henk yet. I?ll try that today.
>>
>> # 	Reseller 	Domain 	
>> 6 	PSA 	voceblu.it <http://voceblu.it> 	
>> 7 	G-Eva 	geva.voceblu.it <http://geva.voceblu.it>
>>
>>
>>
>> thanks
>>
>> ciao
>>
>> stefano
>>
>>
>> Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti 
>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>
>>> Hi Stefano,
>>> looks like veceblu.it <http://veceblu.it> is not a local domain, the 
>>> check that is failing is the one provided by Henk:
>>>
>>> if($du != $null && is_domain_local("$dd"))
>>>
>>> -- Daniel Grotti Head of Customer Support Sipwise GmbH, Campus 
>>> 21/Europaring F15 AT-2345 Brunn am Gebirge Office: +43(0)130120332 
>>> Email: dgrotti at sipwise.com Website: https://www.sipwise.com
>>> On 11/05/2017 09:29 PM, Henk wrote:
>>>>
>>>> Hi Stefano,
>>>>
>>>> I had to add the DNS name of my server to SPCE as a dummy domain to 
>>>> stop the loose-routing error. But if I look at your log, it seems 
>>>> you are using _voceblu.it <http://voceblu.it>_ and not geva.voceblu.it.
>>>> <http://geva.voceblu.it> Are both domains existing in SPCE?
>>>>
>>>>
>>>> In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to 
>>>> see if the destination uri domain is local, if this fails it 
>>>> produces the loose-route error:
>>>>
>>>> ??? ??? if(!has_totag())
>>>> ??? ??? {
>>>> ??? ??? ??? if($du != $null && _*is_domain_local("$dd")*_)
>>>> ??? ??? ??? {
>>>> ??? xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci 
>>>> UA='$ua'\n");
>>>> ??? $du = $null;
>>>> ??? ??? ??? }
>>>> ??? ??? ??? else
>>>> ??? ??? ??? {
>>>> ??? xlog("L_NOTICE", "_*Initial loose-routing rejected*_ - R=$ru 
>>>> ID=$ci UA='$ua'\n");
>>>> ??? sl_send_reply("403", "Initial Loose-Routing Forbidden");
>>>> ??? exit;
>>>> ??? ??? ??? }
>>>> ??? ??? }
>>>>
>>>> Hope this helps,
>>>>
>>>> Regards,
>>>>
>>>> Henk Plessius
>>>>
>>>> On 5-11-2017 19:31, stefanormc wrote:
>>>>> Hi Henk,
>>>>>
>>>>> I?m no too sure what you mean. What proxy domain do you refer to?
>>>>>
>>>>> In my case, user is XXXXX at geva.voceblu.it 
>>>>> <mailto:XXXXX at geva.voceblu.it>?and I have geva.voceblu.it 
>>>>> <http://geva.voceblu.it> realm configured
>>>>>
>>>>> Proxy is centrale.aXXXXXXti.it <http://centrale.aXXXXXXti.it>?that 
>>>>> seems to be correctly configured on the Grandstream ATA
>>>>>
>>>>> Thanks
>>>>>
>>>>> ciao
>>>>>
>>>>> Stefano
>>>>>
>>>>> On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl 
>>>>> <mailto:henk at voipdigit.nl>) wrote:
>>>>>
>>>>>> Hi Stefano,
>>>>>>
>>>>>> I had the same problem when I made a connection to an 
>>>>>> authorization domain which was not the same as the server 
>>>>>> address. In some clients you have to use the proxy setting to 
>>>>>> specify the server address. The kamailio proxy checks the domain 
>>>>>> against the known domains (domain table in the kamailio db). I 
>>>>>> solved this by adding the proxy domain in SPCE. Hope this helps 
>>>>>> for you too.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Henk Plessius
>>>>>>
>>>>>>
>>>>>> On 4-11-2017 17:13, stefanormc wrote:
>>>>>>> Hello again,
>>>>>>>
>>>>>>> Anyone?? No ideas?
>>>>>>>
>>>>>>> I?m stuck
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Ciao
>>>>>>>
>>>>>>> Stefano
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
>>>>>>> <mailto:stefanormc at gmail.com>) wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>>>>>>>> problem on outbound calls from certain clients that are 
>>>>>>>> correctly registered and have no problem on inbound calls.
>>>>>>>>
>>>>>>>> This what I see in spce log:
>>>>>>>>
>>>>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New 
>>>>>>>> request on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>>>>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>>>>> F=sip:0119649202 at voceblu.it 
>>>>>>>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>>>>>>>> T=sip:0110133301 at voceblu.it 
>>>>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>>>>> IP=172.26.4.92:1024 <http://172.26.4.92:1024> (127.0.0.1:5060 
>>>>>>>> <http://127.0.0.1:5060>) ID=1052434700-5060-11 at BJC.BGI.B.H 
>>>>>>>> UA='Grandstream HT701 1.0.8.2'
>>>>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>>>>>>>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>>>>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>>>>>>>
>>>>>>>> Outbound calls worked fine before upgrading
>>>>>>>>
>>>>>>>> Any hint where the problem might lie?
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> stefano
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/c443dd90/attachment.html>

From stefanormc at gmail.com  Mon Nov  6 05:24:00 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 02:24:00 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
Message-ID: <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>

MariaDB [ngcp]> select * from kamailio.domain;

+----+----------------------------+---------------------+------+

| id | domain                     | last_modified       | did  |

+----+----------------------------+---------------------+------+

|  1 | voip.sipwise.local         | 1900-01-01 00:00:01 | NULL |

|  2 | sipd.bandablu.com          | 1900-01-01 00:00:01 | NULL |

|  3 | d.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  5 | c.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  8 | netgen.voceblu.it          | 1900-01-01 00:00:01 | NULL |

| 11 | res.voceblu.it             | 1900-01-01 00:00:01 | NULL |

| 12 | via-bolletta.telefonica.it | 1900-01-01 00:00:01 | NULL |

| 13 | centrale03.avanzati.it     | 1900-01-01 00:00:01 | NULL |

+----+----------------------------+---------------------+------+

*8 rows in set (0.02 sec)*



centrale03:~# ngcp-kamctl proxy fifo domain_dump

domain:: sipd.bandablu.com

did:: sipd.bandablu.com

domain:: voip.sipwise.local

did:: voip.sipwise.local

domain:: via-bolletta.telefonica.it

did:: via-bolletta.telefonica.it

domain:: centrale03.avanzati.it

did:: centrale03.avanzati.it

domain:: res.voceblu.it

did:: res.voceblu.it

domain:: d.voceblu.it

did:: d.voceblu.it

domain:: c.voceblu.it

did:: c.voceblu.it

domain:: netgen.voceblu.it

did:: netgen.voceblu.it


Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

select * from kamailio.domain;
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/8223fbb5/attachment.html>

From dgrotti at sipwise.com  Mon Nov  6 05:34:12 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 11:34:12 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
Message-ID: <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>

mmm...so the problem could be in the $du variable.
Since loose_route() return TRUE, it means that the INVITE contains a 
Route header.

Can you take a trace of such call (with sngrep for example) and paste 
here the INVITE you receive from this UA ?


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:24 AM, stefanormc wrote:
>
> MariaDB [ngcp]> select * from kamailio.domain;
>
> +----+----------------------------+---------------------+------+
>
> | id | domain ? ? ? ? ? ? ? ? ? ? | last_modified ? ? ? | did? |
>
> +----+----------------------------+---------------------+------+
>
> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>
> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
> 1900-01-01 00:00:01 | NULL |
>
> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? ? ? | 1900-01-01 
> 00:00:01 | NULL |
>
> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? ? ? | 1900-01-01 
> 00:00:01 | NULL |
>
> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
> 1900-01-01 00:00:01 | NULL |
>
> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? ? | 1900-01-01 
> 00:00:01 | NULL |
>
> | 12 | via-bolletta.telefonica.it <http://via-bolletta.telefonica.it> 
> | 1900-01-01 00:00:01 | NULL |
>
> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? | 
> 1900-01-01 00:00:01 | NULL |
>
> +----+----------------------------+---------------------+------+
>
> *8 rows in set (0.02 sec)*
>
> *
> *
> *
> *
> *
> *
>
> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>
> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>
> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>
> domain:: voip.sipwise.local
>
> did:: voip.sipwise.local
>
> domain:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>
> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>
> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>
> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>
> domain:: res.voceblu.it <http://res.voceblu.it>
>
> did:: res.voceblu.it <http://res.voceblu.it>
>
> domain:: d.voceblu.it <http://d.voceblu.it>
>
> did:: d.voceblu.it <http://d.voceblu.it>
>
> domain:: c.voceblu.it <http://c.voceblu.it>
>
> did:: c.voceblu.it <http://c.voceblu.it>
>
> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>
> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>
>
>
> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>
>> select * from kamailio.domain;

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/4c671ece/attachment.html>

From stefanormc at gmail.com  Mon Nov  6 05:56:55 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 02:56:55 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
Message-ID: <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>

Great tool!

*                                                                 Call flow
for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by Request/Response)*


                                            ?*INVITE*
*sip:centrale03.avanzati.it
<http://centrale03.avanzati.it>* SIP/2.0

          178.255.188.147:42652           *94.125.235.56:5060
<http://94.125.235.56:5060>*              *127.0.0.1:5060
<http://127.0.0.1:5060>*                *127.0.0.1:5062
<http://127.0.0.1:5062>*  ?Via: SIP/2.0/UDP 192.168.192.50:5070
;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13

          ????????????????????          ????????????????????
????????????????????          ?????????????????????0f185f8

                    ? *       INVITE (SDP)        * ?
      ?                             ?         ?From: <
sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417

  *11:44:32.102554*   ? *??????????????????????????>* ?
        ?                             ?         ?To: <
sip:3482209875 at c.voceblu.it>

        +0.000462   ?                             ?
    ?        INVITE (SDP)         ?         ?Contact: <
sip:0119084086 at 192.168.192.50:5070>

  11:44:32.103016   ?                             ?
    ? ??????????????????????????> ?         ?Call-ID:
*4ae7566c-c8ab-4b29-9950-d6829953f085*

        +0.000214   ?                             ?
    ?         100 Trying          ?         ?CSeq: 20617 INVITE

  11:44:32.103230   ?                             ?
    ? <?????????????????????????? ?         ?Allow: OPTIONS, SUBSCRIBE,
NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R

        +0.000176   ?                             ?
    ?  403 Initial Loose-Routing  ?         ?ISTER, REFER, MESSAGE

  11:44:32.103406   ?                             ?
    ? <?????????????????????????? ?         ?Supported: 100rel, timer,
replaces, norefersub

        +0.000194   ?         100 Trying          ?
    ?                             ?         ?Session-Expires: 1800

  11:44:32.103600   ? <?????????????????????????? ?
    ?                             ?         ?Min-SE: 90

        +0.000060   ?  403 Initial Loose-Routing  ?
    ?                             ?         ?P-Asserted-Identity:
<sip:112 at galilei.local>

  11:44:32.103660   ? <?????????????????????????? ?
    ?                             ?         ?P-Preferred-Identity:
<sip:112 at galilei.local>

        +0.010267   ?             ACK             ?
    ?                             ?         ?Route: <
sip:3482209875 at c.voceblu.it>

  11:44:32.113927   ? ??????????????????????????> ?
    ?                             ?         ?Max-Forwards: 70

        +0.000254   ?                             ?
    ?             ACK             ?         ?User-Agent: Gigaset T440/T640

  11:44:32.114181   ?                             ?
    ? ??????????????????????????> ?         ?Content-Type: application/sdp

                    ?                             ?
    ?                             ?         ?Content-Length:   239

                    ?                             ?
    ?                             ?         ?

                    ?                             ?
    ?                             ?         ?v=0

                    ?                             ?
    ?                             ?         ?o=- 370697073 370697073 IN IP4
192.168.192.50

                    ?                             ?
    ?                             ?         ?s=Asterisk

                    ?                             ?
    ?                             ?         ?c=IN IP4 192.168.192.50

                    ?                             ?
    ?                             ?         ?t=0 0

                    ?                             ?
    ?                             ?         ?m=audio 12360 RTP/AVP 0 101

                    ?                             ?
    ?                             ?         ?a=rtpmap:0 PCMU/8000

                    ?                             ?
    ?                             ?         ?a=rtpmap:101
telephone-event/8000

                    ?                             ?
    ?                             ?         ?a=fmtp:101 0-16

                    ?                             ?
    ?                             ?         ?a=ptime:20

                    ?                             ?
    ?                             ?         ?a=maxptime:150

                    ?                             ?
    ?                             ?         ?a=sendrecv

                    ?                             ?
    ?                             ?         ?

                    ?                             ?
    ?                             ?         ?

                    ?                             ?
    ?                             ?         ?

can it be the p-asserted-identity the problem? I see is the PBX endpoint
instead of the sipwise account




Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

mmm...so the problem could be in the $du variable.
Since loose_route() return TRUE, it means that the INVITE contains a Route
header.

Can you take a trace of such call (with sngrep for example) and paste here
the INVITE you receive from this UA ?


--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:24 AM, stefanormc wrote:

MariaDB [ngcp]> select * from kamailio.domain;

+----+----------------------------+---------------------+------+

| id | domain                     | last_modified       | did  |

+----+----------------------------+---------------------+------+

|  1 | voip.sipwise.local         | 1900-01-01 00:00:01 | NULL |

|  2 | sipd.bandablu.com          | 1900-01-01 00:00:01 | NULL |

|  3 | d.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  5 | c.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  8 | netgen.voceblu.it          | 1900-01-01 00:00:01 | NULL |

| 11 | res.voceblu.it             | 1900-01-01 00:00:01 | NULL |

| 12 | via-bolletta.telefonica.it | 1900-01-01 00:00:01 | NULL |

| 13 | centrale03.avanzati.it     | 1900-01-01 00:00:01 | NULL |

+----+----------------------------+---------------------+------+

*8 rows in set (0.02 sec)*



centrale03:~# ngcp-kamctl proxy fifo domain_dump

domain:: sipd.bandablu.com

did:: sipd.bandablu.com

domain:: voip.sipwise.local

did:: voip.sipwise.local

domain:: via-bolletta.telefonica.it

did:: via-bolletta.telefonica.it

domain:: centrale03.avanzati.it

did:: centrale03.avanzati.it

domain:: res.voceblu.it

did:: res.voceblu.it

domain:: d.voceblu.it

did:: d.voceblu.it

domain:: c.voceblu.it

did:: c.voceblu.it

domain:: netgen.voceblu.it

did:: netgen.voceblu.it


Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

select * from kamailio.domain;
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/03215d45/attachment.html>

From dgrotti at sipwise.com  Mon Nov  6 06:05:00 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 12:05:00 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
Message-ID: <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>

Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062 
(proxy).
Thanks


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:56 AM, stefanormc wrote:
> Great tool!
>
> *?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by 
> Request/Response)*
>
> ?*INVITE**sip:centrale03.avanzati.it 
> <http://centrale03.avanzati.it>*SIP/2.0
>
> 178.255.188.147:42652 
> <http://178.255.188.147:42652>*94.125.235.56:5060 
> <http://94.125.235.56:5060>**127.0.0.1:5060 
> <http://127.0.0.1:5060>**127.0.0.1:5062 <http://127.0.0.1:5062>* 
> ?Via:SIP/2.0/UDP 
> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>
> ?????????????????????????????????????????????????????????????????????????????????0f185f8
>
> ? *? INVITE (SDP) *????From:<sip:0119084086 at c.voceblu.it 
> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>
> *11:44:32.102554* ? ? 
> *??????????????????????????>*????To:<sip:3482209875 at c.voceblu.it 
> <mailto:sip%3A3482209875 at c.voceblu.it>>
>
> +0.000462? ??? INVITE (SDP) 
> ??Contact:<sip:0119084086 at 192.168.192.50:5070 
> <http://sip:0119084086 at 192.168.192.50:5070>>
>
> 11:44:32.103016 ? ??? 
> ??????????????????????????>??Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>
> +0.000214? ??? ? ? ? 100 Trying ??CSeq:20617 INVITE
>
> 11:44:32.103230 ? ??? <????????????????????????????Allow:OPTIONS, 
> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>
> +0.000176? ??? 403 Initial Loose-Routing ??ISTER, REFER, MESSAGE
>
> 11:44:32.103406 ? ??? <????????????????????????????Supported:100rel, 
> timer, replaces, norefersub
>
> +0.000194? ? ? ? ? 100 Trying ????Session-Expires:1800
>
> 11:44:32.103600 ? ? <??????????????????????????????Min-SE:90
>
> +0.000060? ? 403 Initial Loose-Routing 
> ????P-Asserted-Identity:<sip:112 at galilei.local>
>
> 11:44:32.103660 ? ? 
> <??????????????????????????????P-Preferred-Identity:<sip:112 at galilei.local>
>
> +0.010267? ? ? ? ? ? ? ACK ????Route:<sip:3482209875 at c.voceblu.it 
> <mailto:sip%3A3482209875 at c.voceblu.it>>
>
> 11:44:32.113927 ? ? ??????????????????????????>????Max-Forwards:70
>
> +0.000254? ??? ? ? ? ? ? ACK ??User-Agent:Gigaset T440/T640
>
> 11:44:32.114181 ? ??? 
> ??????????????????????????>??Content-Type:application/sdp
>
> ?????Content-Length:? 239
>
> ?????
>
> ?????v=0
>
> ?????o=- 370697073 370697073 IN IP4 192.168.192.50
>
> ?????s=Asterisk
>
> ?????c=IN IP4 192.168.192.50
>
> ?????t=0 0
>
> ?????m=audio 12360 RTP/AVP 0 101
>
> ?????a=rtpmap:0 PCMU/8000
>
> ?????a=rtpmap:101 telephone-event/8000
>
> ?????a=fmtp:101 0-16
>
> ?????a=ptime:20
>
> ?????a=maxptime:150
>
> ?????a=sendrecv
>
> ?????
>
> ?????
>
> ?????
>
>
> can it be the p-asserted-identity the problem? I see is the PBX 
> endpoint instead of the sipwise account
>
>
>
>
> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti 
> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>
>> mmm...so the problem could be in the $du variable.
>> Since loose_route() return TRUE, it means that the INVITE contains a 
>> Route header.
>>
>> Can you take a trace of such call (with sngrep for example) and paste 
>> here the INVITE you receive from this UA ?
>>
>>
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email:dgrotti at sipwise.com
>> Website:https://www.sipwise.com
>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>
>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>
>>> +----+----------------------------+---------------------+------+
>>>
>>> | id | domain ? ? | last_modified ? ? ? | did |
>>>
>>> +----+----------------------------+---------------------+------+
>>>
>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>
>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
>>> 1900-01-01 00:00:01 | NULL |
>>>
>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? | 1900-01-01 00:00:01 | 
>>> NULL |
>>>
>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? | 1900-01-01 00:00:01 | 
>>> NULL |
>>>
>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
>>> 1900-01-01 00:00:01 | NULL |
>>>
>>> | 11 | res.voceblu.it <http://res.voceblu.it> | 1900-01-01 00:00:01 
>>> | NULL |
>>>
>>> | 12 | via-bolletta.telefonica.it 
>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>
>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? | 
>>> 1900-01-01 00:00:01 | NULL |
>>>
>>> +----+----------------------------+---------------------+------+
>>>
>>> *8 rows in set (0.02 sec)*
>>>
>>> *
>>> *
>>> *
>>> *
>>> *
>>> *
>>>
>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>
>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>
>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>
>>> domain:: voip.sipwise.local
>>>
>>> did:: voip.sipwise.local
>>>
>>> domain:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>
>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>
>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>
>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>
>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>
>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>
>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>
>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>
>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>
>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>
>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>
>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>
>>>
>>>
>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>
>>>> select * from kamailio.domain;
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/75a78362/attachment.html>

From dgrotti at sipwise.com  Mon Nov  6 06:06:37 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 12:06:37 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
 <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
Message-ID: <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>

Or better to send me the entire pcap (you can use my email if you don't 
want to share data).

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 12:05 PM, Daniel Grotti wrote:
> Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062 
> (proxy).
> Thanks
>
>
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email:dgrotti at sipwise.com
> Website:https://www.sipwise.com
> On 11/06/2017 11:56 AM, stefanormc wrote:
>> Great tool!
>>
>> *? ? ?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by 
>> Request/Response)*
>>
>> ?*INVITE**sip:centrale03.avanzati.it 
>> <http://centrale03.avanzati.it>*SIP/2.0
>>
>> 178.255.188.147:42652 
>> <http://178.255.188.147:42652>*94.125.235.56:5060 
>> <http://94.125.235.56:5060>**127.0.0.1:5060 
>> <http://127.0.0.1:5060>**127.0.0.1:5062 <http://127.0.0.1:5062>* 
>> ?Via:SIP/2.0/UDP 
>> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>>
>> ?????????????????????????????????????????????????????????????????????????????????0f185f8
>>
>> ? *? INVITE (SDP) *????From:<sip:0119084086 at c.voceblu.it 
>> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>>
>> *11:44:32.102554* ? ? 
>> *??????????????????????????>*????To:<sip:3482209875 at c.voceblu.it 
>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>
>> +0.000462? ??? INVITE (SDP) 
>> ??Contact:<sip:0119084086 at 192.168.192.50:5070 
>> <http://sip:0119084086 at 192.168.192.50:5070>>
>>
>> 11:44:32.103016 ? ??? 
>> ??????????????????????????>??Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>>
>> +0.000214? ??? ? ? ? 100 Trying ??CSeq:20617 INVITE
>>
>> 11:44:32.103230 ? ??? <????????????????????????????Allow:OPTIONS, 
>> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>>
>> +0.000176? ??? 403 Initial Loose-Routing ??ISTER, REFER, MESSAGE
>>
>> 11:44:32.103406 ? ??? <????????????????????????????Supported:100rel, 
>> timer, replaces, norefersub
>>
>> +0.000194? ? ? ? ? 100 Trying ????Session-Expires:1800
>>
>> 11:44:32.103600 ? ? <??????????????????????????????Min-SE:90
>>
>> +0.000060? ? 403 Initial Loose-Routing 
>> ????P-Asserted-Identity:<sip:112 at galilei.local>
>>
>> 11:44:32.103660 ? ? 
>> <??????????????????????????????P-Preferred-Identity:<sip:112 at galilei.local>
>>
>> +0.010267? ? ? ? ? ? ? ACK ????Route:<sip:3482209875 at c.voceblu.it 
>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>
>> 11:44:32.113927 ? ? ??????????????????????????>????Max-Forwards:70
>>
>> +0.000254? ??? ? ? ? ? ? ACK ??User-Agent:Gigaset T440/T640
>>
>> 11:44:32.114181 ? ??? 
>> ??????????????????????????>??Content-Type:application/sdp
>>
>> ?????Content-Length:? 239
>>
>> ?????
>>
>> ?????v=0
>>
>> ?????o=- 370697073 370697073 IN IP4 192.168.192.50
>>
>> ?????s=Asterisk
>>
>> ?????c=IN IP4 192.168.192.50
>>
>> ?????t=0 0
>>
>> ?????m=audio 12360 RTP/AVP 0 101
>>
>> ?????a=rtpmap:0 PCMU/8000
>>
>> ?????a=rtpmap:101 telephone-event/8000
>>
>> ?????a=fmtp:101 0-16
>>
>> ?????a=ptime:20
>>
>> ?????a=maxptime:150
>>
>> ?????a=sendrecv
>>
>> ?????
>>
>> ?????
>>
>> ?????
>>
>>
>> can it be the p-asserted-identity the problem? I see is the PBX 
>> endpoint instead of the sipwise account
>>
>>
>>
>>
>> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti 
>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>
>>> mmm...so the problem could be in the $du variable.
>>> Since loose_route() return TRUE, it means that the INVITE contains a 
>>> Route header.
>>>
>>> Can you take a trace of such call (with sngrep for example) and 
>>> paste here the INVITE you receive from this UA ?
>>>
>>>
>>> --
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email:dgrotti at sipwise.com
>>> Website:https://www.sipwise.com
>>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>>
>>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>>
>>>> +----+----------------------------+---------------------+------+
>>>>
>>>> | id | domain ? ? ? ? ? ? | last_modified ? ? ? | did? |
>>>>
>>>> +----+----------------------------+---------------------+------+
>>>>
>>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>>
>>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? | 1900-01-01 
>>>> 00:00:01 | NULL |
>>>>
>>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? | 1900-01-01 
>>>> 00:00:01 | NULL |
>>>>
>>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> | 12 | via-bolletta.telefonica.it 
>>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>>
>>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> +----+----------------------------+---------------------+------+
>>>>
>>>> *8 rows in set (0.02 sec)*
>>>>
>>>> *
>>>> *
>>>> *
>>>> *
>>>> *
>>>> *
>>>>
>>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>>
>>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>
>>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>
>>>> domain:: voip.sipwise.local
>>>>
>>>> did:: voip.sipwise.local
>>>>
>>>> domain:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>
>>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>
>>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>
>>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>
>>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>>
>>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>>
>>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>>
>>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>>
>>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>>
>>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>>
>>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>
>>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>
>>>>
>>>>
>>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>
>>>>> select * from kamailio.domain;
>>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/dd1ec86c/attachment.html>

From dgrotti at sipwise.com  Mon Nov  6 11:00:46 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 17:00:46 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
 <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
 <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>
Message-ID: <c400d1ba-9343-026e-19b7-af8c0818694e@sipwise.com>

Hi Stefano,
the INVITE the Gigaset is sending is quite weird, never seen this before.
RURI contains the Proxy domain, and conaints a ROUTE header with the 
number to call:

INVITE sip:centrale03.avanzati.it SIP/2.0
Via: SIP/2.0/UDP 
192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8 

From: 
<sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
To: <sip:3482209875 at c.voceblu.it>
Contact: <sip:0119084086 at 192.168.192.50:5070>
Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
CSeq: 20617 INVITE
Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, 
UPDATE, PRACK, REGISTER, REFER, MESSAGE
Supported: 100rel, timer, replaces, norefersub
Session-Expires: 1800
Min-SE: 90
P-Asserted-Identity: <sip:112 at galilei.local>
P-Preferred-Identity: <sip:112 at galilei.local>
Route: <sip:3482209875 at c.voceblu.it>
Max-Forwards: 70
User-Agent: Gigaset T440/T640
Content-Type: application/sdp
Content-Length:?? 239


Also, what is strange is that the INVITE from LB to PROXY looks lile:


INVITE sip:3482209875 at c.voceblu.it SIP/2.0
Record-Route: 
<sip:127.0.0.1;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060> 

Record-Route: 
<sip:94.125.235.56;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060> 

Via: SIP/2.0/UDP 
127.0.0.1;branch=z9hG4bK574d.ba877c02a02cf37c79ee52087c29a8d0.0
Via: SIP/2.0/UDP 
192.168.192.50:5070;received=178.255.188.147;rport=42652;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8 

From: 
<sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
To: <sip:3482209875 at c.voceblu.it>
Contact: <sip:0119084086 at 192.168.192.50:5070;alias=178.255.188.147~42652~1>
Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
CSeq: 20617 INVITE
Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, 
UPDATE, PRACK, REGISTER, MESSAGE
Supported: 100rel, timer, replaces, norefersub
Session-Expires: 1800
Min-SE: 90
P-Asserted-Identity: <sip:112 at galilei.local>
P-Preferred-Identity: <sip:112 at galilei.local>
Max-Forwards: 69
User-Agent: Gigaset T440/T640
Content-Type: application/sdp
Content-Length:?? 269
P-NGCP-Src-Ip: 178.255.188.147
P-NGCP-Src-Port: 42652
P-NGCP-Src-Proto: udp
P-NGCP-Src-Af: 4
P-Sock-Info: udp:94.125.235.56:5060
P-NGCP-Src-Nat: 1
Route: <sip:centrale03.avanzati.it>


And this is also weird, cause it contains a ROUTE header, that should 
not be there.

Which version are you using ?
Do you have kamailo customtt in place ?


I would recommend to check your UA configuration, cause the first invite 
with that RURI and the Route header looks very strange, that should not 
the way to initiate a SIP session. INVITE's R-URI should contains 
sip:<number_called>@<sip_domain>, and usually no route header, or if 
any, they should contain the IP/domain of your NGCP.



-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 12:06 PM, Daniel Grotti wrote:
> Or better to send me the entire pcap (you can use my email if you 
> don't want to share data).
>
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email:dgrotti at sipwise.com
> Website:https://www.sipwise.com
> On 11/06/2017 12:05 PM, Daniel Grotti wrote:
>> Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062 
>> (proxy).
>> Thanks
>>
>>
>> -- 
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email:dgrotti at sipwise.com
>> Website:https://www.sipwise.com
>> On 11/06/2017 11:56 AM, stefanormc wrote:
>>> Great tool!
>>>
>>> *? ? ? ? ?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color 
>>> by Request/Response)*
>>>
>>> ?*INVITE**sip:centrale03.avanzati.it 
>>> <http://centrale03.avanzati.it>*SIP/2.0
>>>
>>> 178.255.188.147:42652 
>>> <http://178.255.188.147:42652>*94.125.235.56:5060 
>>> <http://94.125.235.56:5060>**127.0.0.1:5060 
>>> <http://127.0.0.1:5060>**127.0.0.1:5062 <http://127.0.0.1:5062>* 
>>> ?Via:SIP/2.0/UDP 
>>> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>>>
>>> ?????????????????????????????????????????????????????????????????????????????????0f185f8
>>>
>>> ? *? INVITE (SDP) *????From:<sip:0119084086 at c.voceblu.it 
>>> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>>>
>>> *11:44:32.102554* ? ? 
>>> *??????????????????????????>*????To:<sip:3482209875 at c.voceblu.it 
>>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>
>>> +0.000462? ??? INVITE (SDP) 
>>> ??Contact:<sip:0119084086 at 192.168.192.50:5070 
>>> <http://sip:0119084086 at 192.168.192.50:5070>>
>>>
>>> 11:44:32.103016 ? ??? 
>>> ??????????????????????????>??Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>>>
>>> +0.000214? ??? ? ? ? 100 Trying ??CSeq:20617 INVITE
>>>
>>> 11:44:32.103230 ? ??? <????????????????????????????Allow:OPTIONS, 
>>> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>>>
>>> +0.000176? ??? 403 Initial Loose-Routing ??ISTER, REFER, MESSAGE
>>>
>>> 11:44:32.103406 ? ??? <????????????????????????????Supported:100rel, 
>>> timer, replaces, norefersub
>>>
>>> +0.000194? ? ? ? ? 100 Trying ????Session-Expires:1800
>>>
>>> 11:44:32.103600 ? ? <??????????????????????????????Min-SE:90
>>>
>>> +0.000060? ? 403 Initial Loose-Routing 
>>> ????P-Asserted-Identity:<sip:112 at galilei.local>
>>>
>>> 11:44:32.103660 ? ? 
>>> <??????????????????????????????P-Preferred-Identity:<sip:112 at galilei.local>
>>>
>>> +0.010267? ? ? ? ? ? ? ACK ????Route:<sip:3482209875 at c.voceblu.it 
>>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>
>>> 11:44:32.113927 ? ? ??????????????????????????>????Max-Forwards:70
>>>
>>> +0.000254? ??? ? ? ? ? ? ACK ??User-Agent:Gigaset T440/T640
>>>
>>> 11:44:32.114181 ? ??? 
>>> ??????????????????????????>??Content-Type:application/sdp
>>>
>>> ?????Content-Length:? 239
>>>
>>> ?????
>>>
>>> ?????v=0
>>>
>>> ?????o=- 370697073 370697073 IN IP4 192.168.192.50
>>>
>>> ?????s=Asterisk
>>>
>>> ?????c=IN IP4 192.168.192.50
>>>
>>> ?????t=0 0
>>>
>>> ?????m=audio 12360 RTP/AVP 0 101
>>>
>>> ?????a=rtpmap:0 PCMU/8000
>>>
>>> ?????a=rtpmap:101 telephone-event/8000
>>>
>>> ?????a=fmtp:101 0-16
>>>
>>> ?????a=ptime:20
>>>
>>> ?????a=maxptime:150
>>>
>>> ?????a=sendrecv
>>>
>>> ?????
>>>
>>> ?????
>>>
>>> ?????
>>>
>>>
>>> can it be the p-asserted-identity the problem? I see is the PBX 
>>> endpoint instead of the sipwise account
>>>
>>>
>>>
>>>
>>> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti 
>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>
>>>> mmm...so the problem could be in the $du variable.
>>>> Since loose_route() return TRUE, it means that the INVITE contains 
>>>> a Route header.
>>>>
>>>> Can you take a trace of such call (with sngrep for example) and 
>>>> paste here the INVITE you receive from this UA ?
>>>>
>>>>
>>>> --
>>>> Daniel Grotti
>>>> Head of Customer Support
>>>> Sipwise GmbH, Campus 21/Europaring F15
>>>> AT-2345 Brunn am Gebirge
>>>>
>>>> Office: +43(0)130120332
>>>> Email:dgrotti at sipwise.com
>>>> Website:https://www.sipwise.com
>>>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>>>
>>>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>>>
>>>>> +----+----------------------------+---------------------+------+
>>>>>
>>>>> | id | domain ? ? ? ? ? ? | last_modified ? ? ? | did? |
>>>>>
>>>>> +----+----------------------------+---------------------+------+
>>>>>
>>>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? ? | 1900-01-01 
>>>>> 00:00:01 | NULL |
>>>>>
>>>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? ? | 1900-01-01 
>>>>> 00:00:01 | NULL |
>>>>>
>>>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? ? | 
>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> | 12 | via-bolletta.telefonica.it 
>>>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? 
>>>>> | 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> +----+----------------------------+---------------------+------+
>>>>>
>>>>> *8 rows in set (0.02 sec)*
>>>>>
>>>>> *
>>>>> *
>>>>> *
>>>>> *
>>>>> *
>>>>> *
>>>>>
>>>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>>>
>>>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>
>>>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>
>>>>> domain:: voip.sipwise.local
>>>>>
>>>>> did:: voip.sipwise.local
>>>>>
>>>>> domain:: via-bolletta.telefonica.it 
>>>>> <http://via-bolletta.telefonica.it>
>>>>>
>>>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>>
>>>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>
>>>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>
>>>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>>>
>>>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>>>
>>>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>>>
>>>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>>>
>>>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>>>
>>>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>>>
>>>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>
>>>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>
>>>>>
>>>>>
>>>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
>>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>>
>>>>>> select * from kamailio.domain;
>>>>
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171106/864d732e/attachment.html>

From ascanio.alba7 at gmail.com  Tue Nov  7 03:55:39 2017
From: ascanio.alba7 at gmail.com (Anthony Alba)
Date: Tue, 7 Nov 2017 16:55:39 +0800
Subject: [Spce-user] rtpengine: is there a timeout for one-sided no RTP
	traffic?
Message-ID: <CADkWibeCS0edJWUkuvDXTsgZ03izBSsr_pSQNh8J_Mr7uexOLA@mail.gmail.com>

Trying to understand timeouts here:

If I have one UA disappearing (no RTP packets, no graceful delete from
SIP proxy) but the other side still sending RTP, will rtpengine
timeout?

--silent-timeout: Ditto as the --timeout option, but applies to muted
or inactive media streams. Defaults to 3600 (one hour).

Does this apply to a UA who has crashed? (Say one side is still
sending RTP and thinks the call is up...but the other UA has
disappeared.)

Thanks

Anthony


From agranig at sipwise.com  Tue Nov  7 04:22:54 2017
From: agranig at sipwise.com (Andreas Granig)
Date: Tue, 7 Nov 2017 10:22:54 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <c400d1ba-9343-026e-19b7-af8c0818694e@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
 <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
 <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>
 <c400d1ba-9343-026e-19b7-af8c0818694e@sipwise.com>
Message-ID: <8184c4ca-1b5a-1538-9746-cc24a156d1f6@sipwise.com>

Hi,

In general, I'd say it WOULD work fine, if the Route header at least had
the "lr" flag set. That is, it would need to indicate loose-routing and
look like this:

Route: <sip:3482209875 at c.voceblu.it;lr>

Since this param is missing, it expects the next hop to be a strict
router and inserts the previously set R-URI sip:centrale03.avanzati.it
into another Route once again.

I played a bit with this and managed to get it working, however there is
NO GUARANTEE WHATSOEVER that this is going to cause any security issues
or side effects in routing or billing or anything else. I've just tested
if the proxy is continuing to process the call instead of getting
rejected due to loose-routing restrictions. Having said that, here you
go, there is the patch:

########################
--- /etc/ngcp-config/templates/etc/kamailio/proxy/proxy.cfg.tt2
2017-11-07 10:06:34.939673459 +0100
+++ /etc/ngcp-config/templates/etc/kamailio/proxy/proxy.cfg.customtt.tt2
2017-11-07 10:18:30.748835620 +0100
@@ -105,6 +105,7 @@

 	$(avp(s:first_caller_ipv46_for_rtpproxy)[*]) = $null;

+	$var(ruri_before_loose) = $ru;
 	if(loose_route())
 	{
 		if(check_route_param("rtpprx=yes") || $dlg_var(rtpprx) == "1")
@@ -125,7 +126,13 @@
 		}
 		if(!has_totag())
 		{
-			if($du != $null && is_domain_local("$dd"))
+			if($du == $null && $rU == $null &&
+			   is_domain_local("$rd") &&
is_domain_local("$(var(ruri_before_loose){nameaddr.uri}{uri.host})"))
+			{
+				xlog("L_NOTICE", "HACK: restore strict routed request - [% logreq
-%]\n");
+				$ru = $var(ruri_before_loose);
+			}
+			else if($du != $null && is_domain_local("$dd"))
 			{
 				xlog("L_INFO", "Reset initial local route - [% logreq -%]\n");
 				$du = $null;
########################

So, what it does is checking within loose_route() whether $du is null
(which on a loose-routed request shouldn't be the case) and if the
resulting request-uri has no user-part (because it's set to
"sip:centrale03.avanzati.it" by kamailio after loose_route), and if the
domain part of the request uri is in your domains list (which is true if
you have centrale03.avanzati.it created as a domain in the panel).
Finally it also checks if the original request uri (which we're about to
restore and continue to work with) is also in your domains list (which
is true if you also have c.voceblu.it created as domain in the panel).

If all of this is the case, it takes the previously set request uri (the
one being there in the original Route header) and takes that to continue
routing.

I'm not confident whether this is the correct behavior of a proxy in
general for these types of requests, but it looks strict and reasonable
enough. Anyways, use at own risk.


Andreas


On 11/06/2017 05:00 PM, Daniel Grotti wrote:
> Hi Stefano,
> the INVITE the Gigaset is sending is quite weird, never seen this before.
> RURI contains the Proxy domain, and conaints a ROUTE header with the
> number to call:
> 
> INVITE sip:centrale03.avanzati.it SIP/2.0
> Via: SIP/2.0/UDP
> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8
> 
> From:
> <sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
> To: <sip:3482209875 at c.voceblu.it>
> Contact: <sip:0119084086 at 192.168.192.50:5070>
> Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
> CSeq: 20617 INVITE
> Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL,
> UPDATE, PRACK, REGISTER, REFER, MESSAGE
> Supported: 100rel, timer, replaces, norefersub
> Session-Expires: 1800
> Min-SE: 90
> P-Asserted-Identity: <sip:112 at galilei.local>
> P-Preferred-Identity: <sip:112 at galilei.local>
> Route: <sip:3482209875 at c.voceblu.it>
> Max-Forwards: 70
> User-Agent: Gigaset T440/T640
> Content-Type: application/sdp
> Content-Length:?? 239
> ?
> 
> Also, what is strange is that the INVITE from LB to PROXY looks lile:
> 
> 
> INVITE sip:3482209875 at c.voceblu.it SIP/2.0
> Record-Route:
> <sip:127.0.0.1;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060>
> 
> Record-Route:
> <sip:94.125.235.56;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060>
> 
> Via: SIP/2.0/UDP
> 127.0.0.1;branch=z9hG4bK574d.ba877c02a02cf37c79ee52087c29a8d0.0
> Via: SIP/2.0/UDP
> 192.168.192.50:5070;received=178.255.188.147;rport=42652;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8
> 
> From:
> <sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
> To: <sip:3482209875 at c.voceblu.it>
> Contact: <sip:0119084086 at 192.168.192.50:5070;alias=178.255.188.147~42652~1>
> Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
> CSeq: 20617 INVITE
> Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL,
> UPDATE, PRACK, REGISTER, MESSAGE
> Supported: 100rel, timer, replaces, norefersub
> Session-Expires: 1800
> Min-SE: 90
> P-Asserted-Identity: <sip:112 at galilei.local>
> P-Preferred-Identity: <sip:112 at galilei.local>
> Max-Forwards: 69
> User-Agent: Gigaset T440/T640
> Content-Type: application/sdp
> Content-Length:?? 269
> P-NGCP-Src-Ip: 178.255.188.147
> P-NGCP-Src-Port: 42652
> P-NGCP-Src-Proto: udp
> P-NGCP-Src-Af: 4
> P-Sock-Info: udp:94.125.235.56:5060
> P-NGCP-Src-Nat: 1
> Route: <sip:centrale03.avanzati.it>
> ?
> 
> And this is also weird, cause it contains a ROUTE header, that should
> not be there.
> 
> Which version are you using ?
> Do you have kamailo customtt in place ?
> 
> 
> I would recommend to check your UA configuration, cause the first invite
> with that RURI and the Route header looks very strange, that should not
> the way to initiate a SIP session. INVITE's R-URI should contains
> sip:<number_called>@<sip_domain>, and usually no route header, or if
> any, they should contain the IP/domain of your NGCP.
> 
> 
> 
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
> 
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
> 
> On 11/06/2017 12:06 PM, Daniel Grotti wrote:
>> Or better to send me the entire pcap (you can use my email if you
>> don't want to share data).
>>
>> -- 
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>> On 11/06/2017 12:05 PM, Daniel Grotti wrote:
>>> Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062
>>> (proxy).
>>> Thanks
>>>
>>>
>>> -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com
>>> Website: https://www.sipwise.com
>>> On 11/06/2017 11:56 AM, stefanormc wrote:
>>>> Great tool!
>>>>
>>>> *? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>>>> ?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by
>>>> Request/Response)*
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>>>> ?*INVITE**sip:centrale03.avanzati.it
>>>> <http://centrale03.avanzati.it>*SIP/2.0
>>>>
>>>> ? ? ? ? ? 178.255.188.147:42652 <http://178.255.188.147:42652>? ? ?
>>>> ? ? *94.125.235.56:5060 <http://94.125.235.56:5060>*? ? ? ? ? ? ?
>>>> *127.0.0.1:5060 <http://127.0.0.1:5060>*? ? ? ? ? ? ? ?
>>>> *127.0.0.1:5062 <http://127.0.0.1:5062>*? ?Via:SIP/2.0/UDP
>>>> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>>>>
>>>> ? ? ? ? ? ????????????????????? ? ? ? ? ????????????????????? ? ? ?
>>>> ? ????????????????????? ? ? ? ? ?????????????????????0f185f8
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ??*? ? ? INVITE (SDP) ? ? ? ?*?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?From:<sip:0119084086 at c.voceblu.it
>>>> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>>>>
>>>> ? *11:44:32.102554* ? ? *??????????????????????????>*?? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?To:<sip:3482209875 at c.voceblu.it <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>>
>>>> ? ? ? ? +0.000462? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ??? ? ? INVITE (SDP) ? ? ? ??? ? ? ?
>>>> ?Contact:<sip:0119084086 at 192.168.192.50:5070
>>>> <http://sip:0119084086 at 192.168.192.50:5070>>
>>>>
>>>> ? 11:44:32.103016 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ??????????????????????????>?? ? ? ?
>>>> ?Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>>>>
>>>> ? ? ? ? +0.000214? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ? ? 100 Trying? ? ? ? ??? ? ? ? ?CSeq:20617 INVITE
>>>>
>>>> ? 11:44:32.103230 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? <???????????????????????????? ? ? ? ?Allow:OPTIONS,
>>>> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>>>>
>>>> ? ? ? ? +0.000176? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ??403 Initial Loose-Routing??? ? ? ? ?ISTER, REFER, MESSAGE
>>>>
>>>> ? 11:44:32.103406 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? <???????????????????????????? ? ? ? ?Supported:100rel,
>>>> timer, replaces, norefersub
>>>>
>>>> ? ? ? ? +0.000194? ? ? ? ? ? 100 Trying? ? ? ? ??? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Session-Expires:1800
>>>>
>>>> ? 11:44:32.103600 ? ? <???????????????????????????? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Min-SE:90
>>>>
>>>> ? ? ? ? +0.000060? ??403 Initial Loose-Routing??? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?P-Asserted-Identity:<sip:112 at galilei.local>
>>>>
>>>> ? 11:44:32.103660 ? ? <???????????????????????????? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?P-Preferred-Identity:<sip:112 at galilei.local>
>>>>
>>>> ? ? ? ? +0.010267? ? ? ? ? ? ? ? ACK ? ? ? ? ? ??? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?Route:<sip:3482209875 at c.voceblu.it
>>>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>>
>>>> ? 11:44:32.113927 ? ? ??????????????????????????>?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Max-Forwards:70
>>>>
>>>> ? ? ? ? +0.000254? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ? ? ? ? ACK ? ? ? ? ? ??? ? ? ? ?User-Agent:Gigaset
>>>> T440/T640
>>>>
>>>> ? 11:44:32.114181 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ??????????????????????????>?? ? ? ?
>>>> ?Content-Type:application/sdp
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Content-Length:? 239
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?v=0
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?o=- 370697073
>>>> 370697073 IN IP4 192.168.192.50
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?s=Asterisk
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?c=IN IP4 192.168.192.50
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?t=0 0
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?m=audio 12360
>>>> RTP/AVP 0 101
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=rtpmap:0 PCMU/8000
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=rtpmap:101
>>>> telephone-event/8000
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=fmtp:101 0-16
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=ptime:20
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=maxptime:150
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=sendrecv
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>>
>>>> can it be the p-asserted-identity the problem? I see is the PBX
>>>> endpoint instead of the sipwise account?
>>>>
>>>>
>>>>
>>>>
>>>> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti
>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>
>>>>> mmm...so the problem could be in the $du variable.
>>>>> Since loose_route() return TRUE, it means that the INVITE contains
>>>>> a Route header.
>>>>>
>>>>> Can you take a trace of such call (with sngrep for example) and
>>>>> paste here the INVITE you receive from this UA ?
>>>>>
>>>>>
>>>>> --  
>>>>> Daniel Grotti
>>>>> Head of Customer Support
>>>>> Sipwise GmbH, Campus 21/Europaring F15
>>>>> AT-2345 Brunn am Gebirge
>>>>>
>>>>> Office: +43(0)130120332
>>>>> Email: dgrotti at sipwise.com
>>>>> Website: https://www.sipwise.com
>>>>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>>>>
>>>>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>>>>
>>>>>> +----+----------------------------+---------------------+------+
>>>>>>
>>>>>> | id | domain ? ? ? ? ? ? ? ? ? ? | last_modified ? ? ? | did? |
>>>>>>
>>>>>> +----+----------------------------+---------------------+------+
>>>>>>
>>>>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com>? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it>? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> | 12 | via-bolletta.telefonica.it
>>>>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ?
>>>>>> | 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> +----+----------------------------+---------------------+------+
>>>>>>
>>>>>> *8 rows in set (0.02 sec)*
>>>>>>
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>>
>>>>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>>>>
>>>>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>>
>>>>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>>
>>>>>> domain:: voip.sipwise.local
>>>>>>
>>>>>> did:: voip.sipwise.local
>>>>>>
>>>>>> domain:: via-bolletta.telefonica.it
>>>>>> <http://via-bolletta.telefonica.it>
>>>>>>
>>>>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>>>
>>>>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>>
>>>>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>>
>>>>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>>>>
>>>>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>>>>
>>>>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>>>>
>>>>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>>>>
>>>>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>>>>
>>>>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>>>>
>>>>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>>
>>>>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti
>>>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>>>
>>>>>>> select * from kamailio.domain;
>>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
> 


From rfuchs at sipwise.com  Tue Nov  7 17:40:56 2017
From: rfuchs at sipwise.com (Richard Fuchs)
Date: Tue, 7 Nov 2017 17:40:56 -0500
Subject: [Spce-user] rtpengine: is there a timeout for one-sided no RTP
 traffic?
In-Reply-To: <CADkWibeCS0edJWUkuvDXTsgZ03izBSsr_pSQNh8J_Mr7uexOLA@mail.gmail.com>
References: <CADkWibeCS0edJWUkuvDXTsgZ03izBSsr_pSQNh8J_Mr7uexOLA@mail.gmail.com>
Message-ID: <04fb24e5-5c71-74c2-70dc-abc0f9267218@sipwise.com>

On 07/11/17 03:55 AM, Anthony Alba wrote:
> Trying to understand timeouts here:
>
> If I have one UA disappearing (no RTP packets, no graceful delete from
> SIP proxy) but the other side still sending RTP, will rtpengine
> timeout?

No, and this is intentional. If one side is dead but the other is still 
alive, it's the responsibility of the alive client to tear down the 
session. This applies to both timeout=... and silent-timeout=... 
options. Only final-timeout=... can be used to restrict the length of a 
session in this case.

Cheers


From mpower at yegtel.ca  Wed Nov  8 11:39:56 2017
From: mpower at yegtel.ca (Maxwell Power)
Date: Wed, 8 Nov 2017 09:39:56 -0700
Subject: [Spce-user] Can't update Subscriber Call Forward
Message-ID: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>

We have a customer who upon logging into their customer portal cannot update
their call forwarding. It also does not show the current status of the
forward. If one is set, it still shows 0 in the panel. When clicking on
configure preferences they receive a 500 error in the panel and we see the
following in the logs:

 

Nov  8 09:36:30 SBC01 ngcp-panel: ERROR: fatal error, id=14F52999BAC53D48,
timestamp=2017-11-08T16:36:30.292893000Z, error=Caught exception in
NGCP::Panel::Controller::Subscriber->preferences "Can't locate object method
"provisioning_voip_subscriber" via package
"NGCP::Panel::Model::DB::provisioning_voip_subscribers" at
/usr/share/perl5/NGCP/Panel/Utils/Subscriber.pm line 1398."

 

If I remove their call forwarding from the admin panel, we can access the
preferences, but as soon as we save a call forward, it goes to the 500
screen.

 

We are currently running mr5.5.1.

 

Cheers,
Maxwell Power

Technical Account Manager
Phone: (780) 809-9990 Ext. 417 | Toll Free: (855) 4-YEGTEL(934835) | Fax:
(780) 401-3390
YEGTEL Communications INC. | 10301 104 ST NW, Suite 55, Edmonton, Alberta,
T5J 1B9
Email:  <mailto:mpower at yegtel.ca> mpower at yegtel.ca | Web:
<https://www.yegtel.ca/> www.yegtel.ca

 

This e-mail and any attachments may contain confidential or privileged
information. If you are not an intended recipient, do not re-send, copy or
use this e-mail. Please also contact the sender immediately and delete this
e-mail in its entirety. Privilege is not waived by reason of mistaken
delivery to you. YEGTEL Communications and its affiliates accept no
liability whatsoever for loss or damage in relation to this e-mail and may
monitor, retain and/or review email. Opinions expressed in this e-mail are
those of the author and may not represent the opinions of YEGTEL
Communications and its affiliates.

 

Ce courriel et toutes ses pi?ces jointes peuvent contenir de l'information
de nature confidentielle ou privil?gi?e. Si vous avez re?u ce courriel par
erreur, merci de ne pas le transf?rer, le copier ou l'utiliser. Veuillez
communiquer imm?diatement avec l'exp?diteur et supprimer le message dans son
int?gralit?. Le fait de vous avoir envoy? ce courriel par erreur ne signifie
pas que l'exp?diteur renonce ? ses droits. YEGTEL Communications et ses
soci?t?s affili?es ne peuvent ?tre tenues responsables de toute perte ou
dommages li?s au pr?sent courriel et peuvent effectuer un suivi de ce
courriel, le conserver et l'examiner. Les opinions exprim?es dans le pr?sent
courriel sont celles de son auteur et non celles de YEGTEL Communications et
de ses soci?t?s affili?es.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171108/dcd7628b/attachment.html>

From gjungwirth at sipwise.com  Wed Nov  8 12:41:42 2017
From: gjungwirth at sipwise.com (Gerhard Jungwirth)
Date: Wed, 8 Nov 2017 18:41:42 +0100
Subject: [Spce-user] Can't update Subscriber Call Forward
In-Reply-To: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>
References: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>
Message-ID: <d4bbd95a-1fda-f23e-9eaf-56e9e79d9349@sipwise.com>

Hi,

this has already been reported internally and will be fixed as soon as
possible.

Best Regards, Gerhard


On 2017-11-08 17:39, Maxwell Power wrote:
>
> We have a customer who upon logging into their customer portal cannot
> update their call forwarding. It also does not show the current status
> of the forward. If one is set, it still shows 0 in the panel. When
> clicking on configure preferences they receive a 500 error in the
> panel and we see the following in the logs:
>
> ?
>
> Nov? 8 09:36:30 SBC01 ngcp-panel: ERROR: fatal error,
> id=14F52999BAC53D48, timestamp=2017-11-08T16:36:30.292893000Z,
> error=Caught exception in
> NGCP::Panel::Controller::Subscriber->preferences "Can't locate object
> method "provisioning_voip_subscriber" via package
> "NGCP::Panel::Model::DB::provisioning_voip_subscribers" at
> /usr/share/perl5/NGCP/Panel/Utils/Subscriber.pm line 1398."
>
> ?
>
> If I remove their call forwarding from the admin panel, we can access
> the preferences, but as soon as we save a call forward, it goes to the
> 500 screen.
>
> ?
>
> We are currently running mr5.5.1.
>
> ?
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171108/40b83fc2/attachment.html>

From matthias.hohl at telematica.at  Thu Nov  9 09:37:36 2017
From: matthias.hohl at telematica.at (Matthias Hohl)
Date: Thu, 09 Nov 2017 14:37:36 -0000
Subject: [Spce-user] German Language Files
Message-ID: <673C0777-465D-4684-AF6C-7C7B1AEFDA74@telematica.at>

Hello,

Is there any PRO user who can provide me the german language files for the soundset?

Afaik just english is included in SPCE version, but i would need german soundset too...

Any idea where i can get this?
thanks a lot...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171109/5f7d0a5a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2368 bytes
Desc: not available
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171109/5f7d0a5a/attachment.p7s>

From gjungwirth at sipwise.com  Tue Nov 14 05:37:44 2017
From: gjungwirth at sipwise.com (Gerhard Jungwirth)
Date: Tue, 14 Nov 2017 11:37:44 +0100
Subject: [Spce-user] Can't update Subscriber Call Forward
In-Reply-To: <d4bbd95a-1fda-f23e-9eaf-56e9e79d9349@sipwise.com>
References: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>
 <d4bbd95a-1fda-f23e-9eaf-56e9e79d9349@sipwise.com>
Message-ID: <ce3e5ce8-fa96-16bf-9ee0-c94584e04208@sipwise.com>

Hi,

The fix for mr5.5.1 has just been released. Affected package: ngcp-panel.

Please run ngcp-update (or update according to your policy).

Thanks again for your report and feedback.

Gerhard


On 2017-11-08 18:41, Gerhard Jungwirth wrote:
>
> Hi,
>
> this has already been reported internally and will be fixed as soon as
> possible.
>
> Best Regards, Gerhard
>
>
> On 2017-11-08 17:39, Maxwell Power wrote:
>>
>> We have a customer who upon logging into their customer portal cannot
>> update their call forwarding. It also does not show the current
>> status of the forward. If one is set, it still shows 0 in the panel.
>> When clicking on configure preferences they receive a 500 error in
>> the panel and we see the following in the logs:
>>
>> ?
>>
>> Nov? 8 09:36:30 SBC01 ngcp-panel: ERROR: fatal error,
>> id=14F52999BAC53D48, timestamp=2017-11-08T16:36:30.292893000Z,
>> error=Caught exception in
>> NGCP::Panel::Controller::Subscriber->preferences "Can't locate object
>> method "provisioning_voip_subscriber" via package
>> "NGCP::Panel::Model::DB::provisioning_voip_subscribers" at
>> /usr/share/perl5/NGCP/Panel/Utils/Subscriber.pm line 1398."
>>
>> ?
>>
>> If I remove their call forwarding from the admin panel, we can access
>> the preferences, but as soon as we save a call forward, it goes to
>> the 500 screen.
>>
>> ?
>>
>> We are currently running mr5.5.1.
>>
>> ?
>>
>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171114/53f3bcf3/attachment.html>

From axessofficetheo at gmail.com  Tue Nov 14 08:30:00 2017
From: axessofficetheo at gmail.com (Theo)
Date: Tue, 14 Nov 2017 15:30:00 +0200
Subject: [Spce-user] kamailio crashed
Message-ID: <CA+9+E=VnhH3QG2C-0GcvzWzY5kR4Ajc8W=A+nTzhErJ4mVcd=Q@mail.gmail.com>

HI

Today, for the first time in years, our kamailio crashed on 2.8lts.

In syslog I see this:

 sipwise kernel: [21774576.529912] kamailio[5381] general protection
ip:7f3fd72115ea sp:7fff0aba6350 error:0 in dialplan.so[7f3fd720a000+12000]
Nov 14 15:02:32 sipwise kernel: [21774576.577952] kamailio[5384] general
protection ip:7f3fd72115ea sp:7fff0aba6350 error:0 in
dialplan.so[7f3fd720a000+12000]
Nov 14 15:05:55 sipwise kernel: [21774778.974606] kamailio[26938] general
protection ip:526743 sp:7fff0aba4fd0 error:0 in kamailio[400000+206000]


Any ideas how to troubleshoot this?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171114/20ee5598/attachment.html>

From wfulton at thirdhatch.com  Thu Nov 16 14:32:18 2017
From: wfulton at thirdhatch.com (William Fulton)
Date: Thu, 16 Nov 2017 19:32:18 +0000
Subject: [Spce-user] SPCE LTS Versions - known issues
Message-ID: <CY1PR11MB07788FD85321501225E09CBADD2E0@CY1PR11MB0778.namprd11.prod.outlook.com>

Hello,

We are about to build a second server to migrate our endpoints to. But I was curious if there was a list of known issues with the current LTS version that might inform my decision to wait for patches or use an older LTS version. Any help would be appreciated.

Thank you,
Bill

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171116/9dcb6768/attachment.html>

From m.weigelt at ccgmbh.de  Fri Nov 17 04:58:06 2017
From: m.weigelt at ccgmbh.de (Weigelt, Martin)
Date: Fri, 17 Nov 2017 09:58:06 +0000
Subject: [Spce-user] New sip:provider CE mr5.5.1 is now available
In-Reply-To: <dbc6a916-9b73-498d-02c2-ba95d569963a@sipwise.com>
References: <dbc6a916-9b73-498d-02c2-ba95d569963a@sipwise.com>
Message-ID: <AFF8836ACAEEBE42BC8A7E813276AE3E0110E1AB90@EX10MBOX1K.hosting.inetserver.de>

Hi,

could you please describe the usage of the new licensed stuff?

Nov 13 ngcp-licensed[2503]: Up and running
Nov 13 ngcp-licensed[2503]: No license key configured, sending usage reports only
Nov 13 ngcp-licensed[2503]: Usage report: 0 calls, 2 subscribers, 0 registered subscribers

I?m pretty sure it?s not allowed by some local data protection laws?

--

Mit freundlichen Gr??en,
Best regards,

Dipl. Inform. (FH) Martin Weigelt
Communication Concept GmbH
Manager Operations / Support
Senior Lead Engineer Voice-/Server-infrastructure
Theklaer Strasse 42
04347 Leipzig

Telefon: +49 341 23405 211
Fax:     +49 341 23405 190
Mobile:  +49 151 24038213
Mail:    m.weigelt at ccgmbh.de<mailto:m.weigelt at ccgmbh.de>

Communication Concept GmbH
Registergericht: Amtsgericht Leipzig
Registernummer:  HR 6383

Von: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von sergii kipot
Gesendet: Freitag, 3. November 2017 11:50
An: spce-dev at lists.sipwise.com; spce-user at lists.sipwise.com
Betreff: [Spce-user] New sip:provider CE mr5.5.1 is now available


Dear community!



This is to inform you about the availability of the new SPCE mr5.5.1 !



The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images have

been uploaded, please check the handbook for all the details:

https://www.sipwise.org/doc/mr5.5.1/spce/ar01s04.html



Please find the list of all changes on our web site:

https://www.sipwise.org/news/announcements/sipprovider-mr5-5-1-released/



The release mr5.5 is official LTS release. It will be supported till Oct 31, 2020



Please report issues if any on this mailing list and thank you for being a part of the community!





--

Sergii Kipot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171117/86490573/attachment.html>

From winwithschwinn at gmail.com  Sat Nov 18 20:15:01 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Sat, 18 Nov 2017 17:15:01 -0800
Subject: [Spce-user] MR 4.5.4 Automatic Backup Not Working
Message-ID: <CAMi8z0j9QQdtbMNPq6Xv=rw0QRuDhqF9UWy4a3HXWWWCdVt+yg@mail.gmail.com>

Hello All,

A couple of things that may have already been discussed.  I am running CE
mr4.5.4 and have enabled the automatic backup feature as described in the
handbook and it seems to not be working.  Can someone give me some advice.
The entire backuptools section was missing from my config.yml file so I
added it manually.  I'll copy what I have below so you can take a look.  I
ran the command "ngcpcfg apply 'enabled the backup feature'" after making
my change but it does not seem to be working as described.

Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution
section refers to "C.1.3 backup tools section of the 'NGCP configs
overview'" which is actually located in section B.1.4.

Thank you all!


---My backuptools config section of config.yml---
backuptools:
  cdrexport_backup:
    enable: 'yes'
  etc_backup:
    enable: 'yes'
  mail:
    address: winwithschwinn at gmail.com
    error_subject: '[ngcp-backup] Problems detected during daily backup'
    log_subject: '[ngcp-backup] Daily backup report'
    send_errors: 'yes'
    send_log: 'yes'
  mysql_backup:
    enable: 'yes'
    exclude_dbs: 'syslog sipstats information_schema'
  rotate_days: 7
  storage_dir: '/var/backup/ngcp_backup'
  temp_backup_dir: '/tmp/ngcp_backup'
------
-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171118/366de6f8/attachment.html>

From spce at irg-x.net  Tue Nov 21 12:47:03 2017
From: spce at irg-x.net (Oleg)
Date: Tue, 21 Nov 2017 18:47:03 +0100
Subject: [Spce-user] Move scubscriber to another customer
Message-ID: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>

Hello everyone,

I was wandering if there is a way to move a subscriber from one Customer 
to another (within Sipwise). I was about to 'terminate' it under one 
customer to 'create' it under another. Is there a better way?

Thanks.

Oleg


From winwithschwinn at gmail.com  Tue Nov 21 20:20:07 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Tue, 21 Nov 2017 17:20:07 -0800
Subject: [Spce-user] Backup... Second try
Message-ID: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>

Sending this out again.  Anyone?

---

Hello All,

A couple of things that may have already been discussed.  I am running CE
mr4.5.4 and have enabled the automatic backup feature as described in the
handbook and it seems to not be working.  Can someone give me some advice.
The entire backuptools section was missing from my config.yml file so I
added it manually.  I'll copy what I have below so you can take a look.  I
ran the command "ngcpcfg apply 'enabled the backup feature'" after making
my change but it does not seem to be working as described.

Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution
section refers to "C.1.3 backup tools section of the 'NGCP configs
overview'" which is actually located in section B.1.4.

Thank you all!


---My backuptools config section of config.yml---
backuptools:
  cdrexport_backup:
    enable: 'yes'
  etc_backup:
    enable: 'yes'
  mail:
    address: winwithschwinn at gmail.com
    error_subject: '[ngcp-backup] Problems detected during daily backup'
    log_subject: '[ngcp-backup] Daily backup report'
    send_errors: 'yes'
    send_log: 'yes'
  mysql_backup:
    enable: 'yes'
    exclude_dbs: 'syslog sipstats information_schema'
  rotate_days: 7
  storage_dir: '/var/backup/ngcp_backup'
  temp_backup_dir: '/tmp/ngcp_backup'
------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171121/b1811d25/attachment.html>

From mpower at yegtel.ca  Thu Nov 23 20:34:48 2017
From: mpower at yegtel.ca (Maxwell Power)
Date: Thu, 23 Nov 2017 18:34:48 -0700
Subject: [Spce-user] Voicemail Trouble
Message-ID: <00c101d364c4$6c45aeb0$44d10c10$@yegtel.ca>

Using mr5.5.1 we can't seem to get voicemail to work properly for users.

 

When calling a users voicemail or the access number of 2000 there is no RTP
traffic. We can get some traffic back by restarting asterisk but as soon as
someone connects to a users voicemail it provides no audio again until
restarted.

 

Tried to update the greetings for a user in their subscriber preferences.
After saving a new one, we now receive an error 500 when trying to view that
subscribers preferences.

 

Nov 23 18:28:27 SBC01 ngcp-panel: ERROR: fatal error, id=14F9E1558239CD40,
timestamp=2017-11-24T01:28:27.332808000Z, error=Caught exception in
NGCP::Panel::Controller::Subscriber->preferences "Not a HASH reference at
/usr/share/perl5/NGCP/Panel/Controller/Subscriber.pm line 651."

 

/var/log/ngcp/voicemail.log:

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:24:18 SBC01 asterisk[15420]: NOTICE[20160][C-00000003]:
apps/app_voicemail.c:4193 in find_user_realtime_by_alias: Found mailbox
'1778XXXXXXX' for alias '1778XXXXXXX'

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:8399 in load_vmu_timezone: Using default timezone
'localtime' for mailbox 'fd12bc8d-cc35-44aa-a402-212947dc6e5e'

Nov 23 18:25:19 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:25:19 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000003' for lack of
RTP activity in 61 seconds

Nov 23 18:25:25 SBC01 asterisk[15420]: DEBUG[20712][C-00000004]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:25:51 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:15 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog '889E443D at 209.197.130.80' with
owner SIP/sip_proxy-00000004 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:23 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:26 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000004' for lack of
RTP activity in 61 seconds

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171123/a754c65a/attachment.html>

From skipot at sipwise.com  Fri Nov 24 13:30:45 2017
From: skipot at sipwise.com (sergii kipot)
Date: Fri, 24 Nov 2017 19:30:45 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <c973a284-d257-c2c7-838b-334b9dcdf838@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171124/7d9fa649/attachment.html>

From mpower at yegtel.ca  Fri Nov 24 13:32:36 2017
From: mpower at yegtel.ca (Maxwell Power)
Date: Fri, 24 Nov 2017 11:32:36 -0700
Subject: [Spce-user] Voicemail Trouble
Message-ID: <002801d36552$9ae048f0$d0a0dad0$@yegtel.ca>

Using mr5.5.1 we can't seem to get voicemail to work properly for any users.

 

When calling a users voicemail or the access number of 2000 there is no RTP
traffic. We can get some traffic back by restarting asterisk but as soon as
someone connects to a users voicemail it provides no audio again until
restarted. It would seem at the moment that calls to voicemail are
completely broken.

 

Tried to update the greetings for a user in their subscriber preferences.
After saving a new one, we now receive an error 500 when trying to view that
subscribers preferences.

 

/var/log/ngcp/panel.log:

Nov 23 18:28:27 SBC01 ngcp-panel: ERROR: fatal error, id=14F9E1558239CD40,
timestamp=2017-11-24T01:28:27.332808000Z, error=Caught exception in
NGCP::Panel::Controller::Subscriber->preferences "Not a HASH reference at
/usr/share/perl5/NGCP/Panel/Controller/Subscriber.pm line 651."

 

/var/log/ngcp/voicemail.log:

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:24:18 SBC01 asterisk[15420]: NOTICE[20160][C-00000003]:
apps/app_voicemail.c:4193 in find_user_realtime_by_alias: Found mailbox
'1778XXXXXXX' for alias '1778XXXXXXX'

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:8399 in load_vmu_timezone: Using default timezone
'localtime' for mailbox 'fd12bc8d-cc35-44aa-a402-212947dc6e5e'

Nov 23 18:25:19 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:25:19 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000003' for lack of
RTP activity in 61 seconds

Nov 23 18:25:25 SBC01 asterisk[15420]: DEBUG[20712][C-00000004]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:25:51 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:15 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog '889E443D at 209.197.130.80' with
owner SIP/sip_proxy-00000004 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:23 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:26 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000004' for lack of
RTP activity in 61 seconds

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171124/67387499/attachment.html>

From misesrosas246 at gmail.com  Fri Nov 24 13:39:22 2017
From: misesrosas246 at gmail.com (moises rosas)
Date: Fri, 24 Nov 2017 14:39:22 -0400
Subject: [Spce-user] Structure of IVR menus
Message-ID: <CAPR5FSggQxBk2hn-XSDAxj7N8+897J8i3dG3sAsGfFm_hWKodA@mail.gmail.com>

hello ...

a query how can I create a IVR menu structure in sipwise.

Thank you ...

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171124/7056c0d7/attachment.html>

From misesrosas246 at gmail.com  Fri Nov 24 14:17:31 2017
From: misesrosas246 at gmail.com (moises rosas)
Date: Fri, 24 Nov 2017 15:17:31 -0400
Subject: [Spce-user] Structure of IVR menus
Message-ID: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>

hello ...

a query how can I create a IVR menu structure in sipwise.

Thank you ...


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171124/bfd48e31/attachment.html>

From stefanormc at gmail.com  Mon Nov 13 06:05:54 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 13 Nov 2017 11:05:54 -0000
Subject: [Spce-user] connect 2 sipwise as trunk
Message-ID: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>

Hi all,

what would be the best way to connect 2 spce to each other?

I have different termination trunks on each sipwise (same ver. 5.4.1), my
goal is be able to address calls to terminate on either spce

I tried to setup a simple peer on each spce pointing to the other but it
does not seem to work.

thanks
ciao

stefano
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171113/9d76119d/attachment.html>

From skipot at sipwise.com  Mon Nov 27 08:39:32 2017
From: skipot at sipwise.com (sergii kipot)
Date: Mon, 27 Nov 2017 14:39:32 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <5a205f74-c194-39c1-c85f-9a9a9dfb445c@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171127/637a91d9/attachment.html>

From misesrosas246 at gmail.com  Mon Nov 27 08:42:32 2017
From: misesrosas246 at gmail.com (moises rosas)
Date: Mon, 27 Nov 2017 09:42:32 -0400
Subject: [Spce-user] Fwd: Structure of IVR menus
In-Reply-To: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
References: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
Message-ID: <CAPR5FSjsFk6xsv2DDOXyETHyWQzmKSk=86tPtMDd+kX+=PQJgw@mail.gmail.com>

hello ...

a query how can I create a IVR menu structure in sipwise.

Thank you ...


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#m_7535564484405600763_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171127/78bb0586/attachment.html>

From skipot at sipwise.com  Mon Nov 27 11:28:22 2017
From: skipot at sipwise.com (sergii kipot)
Date: Mon, 27 Nov 2017 17:28:22 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <4ac912e2-a8f6-5b0f-48a8-553e6b6de6f2@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171127/3d9348ee/attachment.html>

From agranig at sipwise.com  Tue Nov 28 09:52:04 2017
From: agranig at sipwise.com (Andreas Granig)
Date: Tue, 28 Nov 2017 15:52:04 +0100
Subject: [Spce-user] Test
Message-ID: <45d2d001-8f64-4c96-ef73-b9336a28221f@sipwise.com>

Please disregard this test mail.

Best,
Andreas


From skipot at sipwise.com  Tue Nov 28 12:36:29 2017
From: skipot at sipwise.com (sergii kipot)
Date: Tue, 28 Nov 2017 18:36:29 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <ca4a3b94-9075-abea-cd49-20b457f67fa7@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/4306aa56/attachment.html>

From skipot at sipwise.com  Tue Nov 28 13:11:56 2017
From: skipot at sipwise.com (sergii kipot)
Date: Tue, 28 Nov 2017 19:11:56 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <2baee0f6-c2de-f3be-a683-2f2315561724@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/d2786395/attachment.html>

From manwe at sipdoc.net  Tue Nov 28 14:32:40 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:32:40 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
Message-ID: <20171128203240.0ad077c6@multivac>

El Mon, 13 Nov 2017 12:05:43 +0100
stefanormc <stefanormc at gmail.com> escribi?:

> Hi all,
> 
> what would be the best way to connect 2 spce to each other?
> 
> I have different termination trunks on each sipwise (same ver. 5.4.1), my
> goal is be able to address calls to terminate on either spce
> 
> I tried to setup a simple peer on each spce pointing to the other but it
> does not seem to work.
> 

There's no easy way if I understood your scenario. You'll need to manually
configure that. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/fa2b46de/attachment.sig>

From manwe at sipdoc.net  Tue Nov 28 14:33:51 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:33:51 +0100
Subject: [Spce-user] kamailio crashed
In-Reply-To: <CA+9+E=VnhH3QG2C-0GcvzWzY5kR4Ajc8W=A+nTzhErJ4mVcd=Q@mail.gmail.com>
References: <CA+9+E=VnhH3QG2C-0GcvzWzY5kR4Ajc8W=A+nTzhErJ4mVcd=Q@mail.gmail.com>
Message-ID: <20171128203351.1144c8eb@multivac>

El Tue, 14 Nov 2017 15:30:00 +0200
Theo <axessofficetheo at gmail.com> escribi?:

> HI
> 
> Today, for the first time in years, our kamailio crashed on 2.8lts.
> 
> In syslog I see this:
> 
>  sipwise kernel: [21774576.529912] kamailio[5381] general protection
> ip:7f3fd72115ea sp:7fff0aba6350 error:0 in dialplan.so[7f3fd720a000+12000]
> Nov 14 15:02:32 sipwise kernel: [21774576.577952] kamailio[5384] general
> protection ip:7f3fd72115ea sp:7fff0aba6350 error:0 in
> dialplan.so[7f3fd720a000+12000]
> Nov 14 15:05:55 sipwise kernel: [21774778.974606] kamailio[26938] general
> protection ip:526743 sp:7fff0aba4fd0 error:0 in kamailio[400000+206000]
> 
> 
> Any ideas how to troubleshoot this?


You'd need to create a bt of the core.

Anyway, dialplan.so takes care of rewrite rules. Check if you did something
nasty since last reboot.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/59e7f497/attachment.sig>

From manwe at sipdoc.net  Tue Nov 28 14:35:08 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:35:08 +0100
Subject: [Spce-user] SPCE LTS Versions - known issues
In-Reply-To: <CY1PR11MB07788FD85321501225E09CBADD2E0@CY1PR11MB0778.namprd11.prod.outlook.com>
References: <CY1PR11MB07788FD85321501225E09CBADD2E0@CY1PR11MB0778.namprd11.prod.outlook.com>
Message-ID: <20171128203508.3ec73181@multivac>

El Thu, 16 Nov 2017 19:32:18 +0000
William Fulton <wfulton at thirdhatch.com> escribi?:

> Hello,
> 
> We are about to build a second server to migrate our endpoints to. But I was
> curious if there was a list of known issues with the current LTS version that
> might inform my decision to wait for patches or use an older LTS version. Any
> help would be appreciated.
> 
>

If you aim for stability I'd suggest 4.5.x lts as your choice. In my
experience, although all NGCP versions are reliable, it takes some time for the
LTS versions to become rock solid. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/52087798/attachment.sig>

From manwe at sipdoc.net  Tue Nov 28 14:35:45 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:35:45 +0100
Subject: [Spce-user] Move scubscriber to another customer
In-Reply-To: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
References: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
Message-ID: <20171128203545.4b0b0524@multivac>

El Tue, 21 Nov 2017 18:47:03 +0100
Oleg <spce at irg-x.net> escribi?:

> Hello everyone,
> 
> I was wandering if there is a way to move a subscriber from one Customer 
> to another (within Sipwise). I was about to 'terminate' it under one 
> customer to 'create' it under another. Is there a better way?
> 
> 

Not that I know. You'll need to terminate and recreate.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/33931a12/attachment.sig>

From manwe at sipdoc.net  Tue Nov 28 14:37:55 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:37:55 +0100
Subject: [Spce-user] Fwd: Structure of IVR menus
In-Reply-To: <CAPR5FSjsFk6xsv2DDOXyETHyWQzmKSk=86tPtMDd+kX+=PQJgw@mail.gmail.com>
References: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
 <CAPR5FSjsFk6xsv2DDOXyETHyWQzmKSk=86tPtMDd+kX+=PQJgw@mail.gmail.com>
Message-ID: <20171128203755.0754f9dc@multivac>

El Mon, 27 Nov 2017 09:42:32 -0400
moises rosas <misesrosas246 at gmail.com> escribi?:

> hello ...
> 
> a query how can I create a IVR menu structure in sipwise.
> 
> 

Please, don't send the same email three times. NGCP is not a pbx solution
unless you buy de commercial PBX module and use the Pro version of the product.
For IVR and other PBX related stuff you'll need to use a cloud pbx solution
like pekePBX. 


cheers,

Jon

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/f8d6039f/attachment.sig>

From dgrotti at sipwise.com  Wed Nov 29 05:50:26 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 11:50:26 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <20171128203240.0ad077c6@multivac>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
Message-ID: <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>

Hi Stefano,

You can configure as peer->subscriber.
On SPCE 1:
- you configure SPCE 2 as peering server with authenticatio

On SPCE 2:
- you configure SPCE 1 as Subscriber.


Daniel



On 11/28/2017 08:32 PM, Jon Bonilla (Manwe) wrote:
> El Mon, 13 Nov 2017 12:05:43 +0100
> stefanormc <stefanormc at gmail.com> escribi?:
>
>> Hi all,
>>
>> what would be the best way to connect 2 spce to each other?
>>
>> I have different termination trunks on each sipwise (same ver. 5.4.1), my
>> goal is be able to address calls to terminate on either spce
>>
>> I tried to setup a simple peer on each spce pointing to the other but it
>> does not seem to work.
>>
> There's no easy way if I understood your scenario. You'll need to manually
> configure that.
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/9675f3a5/attachment.html>

From dgrotti at sipwise.com  Wed Nov 29 05:55:28 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 11:55:28 +0100
Subject: [Spce-user] MR 4.5.4 Automatic Backup Not Working
In-Reply-To: <CAMi8z0j9QQdtbMNPq6Xv=rw0QRuDhqF9UWy4a3HXWWWCdVt+yg@mail.gmail.com>
References: <CAMi8z0j9QQdtbMNPq6Xv=rw0QRuDhqF9UWy4a3HXWWWCdVt+yg@mail.gmail.com>
Message-ID: <71bc0a91-2614-deb9-7485-45a49ae9ec50@sipwise.com>

Hi,
what is not working exactly ?
Please try to run manually

bash -x /usr/sbin/ngcp-backup


and then check /var/log/ngcp/backup_error.log and see what happens

Daniel




On 11/19/2017 02:15 AM, Matt Schwinn wrote:
> Hello All,
>
> A couple of things that may have already been discussed.? I am running 
> CE mr4.5.4 and have enabled the automatic backup feature as described 
> in the handbook and it seems to not be working.? Can someone give me 
> some advice.? The entire backuptools section was missing from my 
> config.yml file so I added it manually.? I'll copy what I have below 
> so you can take a look.? I ran the command "ngcpcfg apply 'enabled the 
> backup feature'" after making my change but it does not seem to be 
> working as described.
>
> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup 
> solution section refers to "C.1.3 backup tools section of the 'NGCP 
> configs overview'" which is actually located in section B.1.4.
>
> Thank you all!
>
>
> ---My backuptools config section of config.yml---
> backuptools:
> ? cdrexport_backup:
> ??? enable: 'yes'
> ? etc_backup:
> ??? enable: 'yes'
> ? mail:
> ??? address: winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>
> ??? error_subject: '[ngcp-backup] Problems detected during daily backup'
> ??? log_subject: '[ngcp-backup] Daily backup report'
> ??? send_errors: 'yes'
> ??? send_log: 'yes'
> ? mysql_backup:
> ??? enable: 'yes'
> ??? exclude_dbs: 'syslog sipstats information_schema'
> ? rotate_days: 7
> ? storage_dir: '/var/backup/ngcp_backup'
> ? temp_backup_dir: '/tmp/ngcp_backup'
> ------
> -- 
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
> ????? and
> Company B
> 209-202-3329
> www.TCGTechLLC.com <http://www.TCGTechLLC.com>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/ba661a82/attachment.html>

From dgrotti at sipwise.com  Wed Nov 29 05:58:47 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 11:58:47 +0100
Subject: [Spce-user] Structure of IVR menus
In-Reply-To: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
References: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
Message-ID: <afaa9fe2-06b9-0709-59bc-8695f6c51f98@sipwise.com>

Hi,
there is no IVR as SPCE is a class 5 solution, not a pbx.
In order to have IVRs you should buy the commercial version of NGCP (C5 
pro or Carrier) and add the CloudPBX module on top of that.
Please check our sales team for additional information.

Daniel





On 11/24/2017 08:17 PM, moises rosas wrote:
> hello ...
>
> a query how can I create a IVR menu structure in sipwise.
>
> Thank you ...
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> 
> 	Libre de virus. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> 
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/1a1a98f9/attachment.html>

From Christian.Osburg at osburg.it  Tue Nov 14 11:14:15 2017
From: Christian.Osburg at osburg.it (Christian Osburg)
Date: Tue, 14 Nov 2017 16:14:15 +0000
Subject: [Spce-user] 180 Ringing with SDP
Message-ID: <d7acdf1a62314af6adeaffa009be8ba9@osburg.it>

Hello,

 

I?m using SIP:Provider CE Edition here in Germany.

 

My callees didn?t get a ringtone when they call a subscriber of my NGCP.

My upstream provider told me that my NGCP is sending ?180 Ringing? but
without SDP to him. Thats the problem.

 

Is it possible to tell NGCP that SDP should send within the ?180 Ringing?
answer?

 

Thank you for your answers in advance.

 

Kind regards,

Christian

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171114/f950c2e5/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5177 bytes
Desc: not available
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171114/f950c2e5/attachment.p7s>

From service at 4voice.nl  Tue Nov 21 13:48:30 2017
From: service at 4voice.nl (4voice Service)
Date: Tue, 21 Nov 2017 19:48:30 +0100
Subject: [Spce-user] rate-o-mat rates calls with 0 cost even though a rate
	is available
In-Reply-To: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
References: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
Message-ID: <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>


Hi all,

I have an issue with rate-o-mat rating most calls with 0 cost even tough
a billing fee is available:


situation:

subscriber X has a billing profile assigned

the billing profile contains a record

source: .
destination: ^43.+$
fee: 0.02

When the subscriber calls a record is added to the cdr table.

But after rate-o-matic rates the call it says rating status "rated", but
the cost is still 0

+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| source_user? | destination_user_dialed | duration |
source_customer_cost | rating_status | source_customer_billing_fee_id |
destination_customer_cost | destination_customer_billing_fee_id |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| 4367xxxxxxx | 431xxxxxxxxxxx ?????????? |? 129.825 | 0.000000 |
ok??????????? |?????????????????????????? NULL |
0.000000 |??????????????????????????????? NULL |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
1 row in set (0.00 sec)

Note that the billing_fee_ids also remain 0.

I've tried creating and assigning a new billing profile with just 1
catchall record. But after setting the status to 'unrated' it just gets
rated again with 0 cost.

There are no errors in cdr.log and rate-o-mat.log (the latter shows the
cdr has been rated, but no additional errors/info)

How do I troubleshoot/fix?

Regards,
Pieter




From dgrotti at sipwise.com  Wed Nov 29 06:10:22 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 12:10:22 +0100
Subject: [Spce-user] 180 Ringing with SDP
In-Reply-To: <d7acdf1a62314af6adeaffa009be8ba9@osburg.it>
References: <d7acdf1a62314af6adeaffa009be8ba9@osburg.it>
Message-ID: <b8a90b8e-8922-ce48-fc22-a2f31ef7a651@sipwise.com>

Hi,
NGCP does not send any ring back tone, cause we do not generate them.
What your provider is telling you is not correct.
Sending back a 180 RInging means that the UAC should generate the ring 
tone locally.
There is no requirements in RFC saying that a Class 5 (or proxy) must 
generate a ring tone vie SDP.
NGCP forwards back to the caller what it receives from the callee.


This is a problem of your provider, not on NGCP.

Cheers,
Daniel





On 11/14/2017 05:14 PM, Christian Osburg wrote:
>
> Hello,
>
> I?m using SIP:Provider CE Edition here in Germany.
>
> My callees didn?t get a ringtone when they call a subscriber of my NGCP.
>
> My upstream provider told me that my NGCP is sending ?180 Ringing? but 
> without SDP to him. Thats the problem.
>
> Is it possible to tell NGCP that SDP should send within the ?180 
> Ringing? answer?
>
> Thank you for your answers in advance.
>
> Kind regards,
>
> Christian
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/8dc4507c/attachment.html>

From dgrotti at sipwise.com  Wed Nov 29 06:18:49 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 12:18:49 +0100
Subject: [Spce-user] rate-o-mat rates calls with 0 cost even though a
 rate is available
In-Reply-To: <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
References: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
 <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
Message-ID: <a4600962-cd2a-e852-b183-21939c270717@sipwise.com>

Hi,
you should first check the CDR of that call in mysql, accounting.cdr table.
in CDR you will see the filed:

source_customer_billing_fee_id: xxxxxx


That number is the billing_fee_id matched to bill that call, and you can 
find it via:

select * from billing_fees_history where id='xxxxx'

in this way you can see if the call is really fetching the expected fee 
or not.

 From what you are saying it seems that the call is fetching another fee 
with rate 0.


Daniel





On 11/21/2017 07:48 PM, 4voice Service wrote:
>
> Hi all,
>
> I have an issue with rate-o-mat rating most calls with 0 cost even tough
> a billing fee is available:
>
>
> situation:
>
> subscriber X has a billing profile assigned
>
> the billing profile contains a record
>
> source: .
> destination: ^43.+$
> fee: 0.02
>
> When the subscriber calls a record is added to the cdr table.
>
> But after rate-o-matic rates the call it says rating status "rated", but
> the cost is still 0
>
> +--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+ 
>
> | source_user? | destination_user_dialed | duration |
> source_customer_cost | rating_status | source_customer_billing_fee_id |
> destination_customer_cost | destination_customer_billing_fee_id |
> +--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+ 
>
> | 4367xxxxxxx | 431xxxxxxxxxxx ?????????? |? 129.825 | 0.000000 |
> ok??????????? |?????????????????????????? NULL |
> 0.000000 |??????????????????????????????? NULL |
> +--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+ 
>
> 1 row in set (0.00 sec)
>
> Note that the billing_fee_ids also remain 0.
>
> I've tried creating and assigning a new billing profile with just 1
> catchall record. But after setting the status to 'unrated' it just gets
> rated again with 0 cost.
>
> There are no errors in cdr.log and rate-o-mat.log (the latter shows the
> cdr has been rated, but no additional errors/info)
>
> How do I troubleshoot/fix?
>
> Regards,
> Pieter
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user



From rkrenn at sipwise.com  Wed Nov 29 06:22:26 2017
From: rkrenn at sipwise.com (Rene Krenn)
Date: Wed, 29 Nov 2017 12:22:26 +0100
Subject: [Spce-user] rate-o-mat rates calls with 0 cost even though a
	rate	is available
In-Reply-To: <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
References: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
 <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
Message-ID: <00ac01d36904$566f0b60$034d2220$@sipwise.com>

Hi,

did you check rate_at timestmap or tried to let it re-rate the cdr? (maybe it that result was created before you adjusted fees).

You can enable rate-o-mat debug in /etc/ngcp-config/templates/etc/default/ngcp-rate-o-mat.tt2 and then look at detailed output in /var/log/ngcp/rate-o-mat.log.

regards

-----Urspr?ngliche Nachricht-----
Von: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von 4voice Service
Gesendet: Dienstag, 21. November 2017 19:49
An: spce-user at lists.sipwise.com
Betreff: [Spce-user] rate-o-mat rates calls with 0 cost even though a rate is available


Hi all,

I have an issue with rate-o-mat rating most calls with 0 cost even tough a billing fee is available:


situation:

subscriber X has a billing profile assigned

the billing profile contains a record

source: .
destination: ^43.+$
fee: 0.02

When the subscriber calls a record is added to the cdr table.

But after rate-o-matic rates the call it says rating status "rated", but the cost is still 0

+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| source_user  | destination_user_dialed | duration |
source_customer_cost | rating_status | source_customer_billing_fee_id | destination_customer_cost | destination_customer_billing_fee_id |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| 4367xxxxxxx | 431xxxxxxxxxxx            |  129.825 | 0.000000 |
ok            |                           NULL |
0.000000 |                                NULL |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
1 row in set (0.00 sec)

Note that the billing_fee_ids also remain 0.

I've tried creating and assigning a new billing profile with just 1 catchall record. But after setting the status to 'unrated' it just gets rated again with 0 cost.

There are no errors in cdr.log and rate-o-mat.log (the latter shows the cdr has been rated, but no additional errors/info)

How do I troubleshoot/fix?

Regards,
Pieter


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user



From alutay at sipwise.com  Wed Nov 29 08:09:13 2017
From: alutay at sipwise.com (Alex Lutay)
Date: Wed, 29 Nov 2017 14:09:13 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
Message-ID: <671d485c-3564-7844-1a59-5c42bd892057@sipwise.com>

Hi,

For the history, replied in the first thread here:
https://lists.sipwise.com/pipermail/spce-user/2017-November/011979.html

On 11/22/2017 02:20 AM, Matt Schwinn wrote:
> Sending this out again.? Anyone?

-- 
Alex Lutay


From rcuaresma at telcon.es  Tue Nov 28 14:33:46 2017
From: rcuaresma at telcon.es (Robert Cuaresma)
Date: Tue, 28 Nov 2017 20:33:46 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
Message-ID: <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>

Hi Matt,

Backup tools are only available in PRO/CARRIER only. I attached a e-mail 
from Alex Lutay that he confirm that.

Saludos,
Robert Cuaresma

El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
> Sending this out again.? Anyone?
>
> ---
>
> Hello All,
>
> A couple of things that may have already been discussed.? I am running 
> CE mr4.5.4 and have enabled the automatic backup feature as described 
> in the handbook and it seems to not be working.? Can someone give me 
> some advice.? The entire backuptools section was missing from my 
> config.yml file so I added it manually.? I'll copy what I have below 
> so you can take a look.? I ran the command "ngcpcfg apply 'enabled the 
> backup feature'" after making my change but it does not seem to be 
> working as described.
>
> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup 
> solution section refers to "C.1.3 backup tools section of the 'NGCP 
> configs overview'" which is actually located in section B.1.4.
>
> Thank you all!
>
>
> ---My backuptools config section of config.yml---
> backuptools:
> ? cdrexport_backup:
> ??? enable: 'yes'
> ? etc_backup:
> ??? enable: 'yes'
> ? mail:
> ??? address: winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>
> ??? error_subject: '[ngcp-backup] Problems detected during daily backup'
> ??? log_subject: '[ngcp-backup] Daily backup report'
> ??? send_errors: 'yes'
> ??? send_log: 'yes'
> ? mysql_backup:
> ??? enable: 'yes'
> ??? exclude_dbs: 'syslog sipstats information_schema'
> ? rotate_days: 7
> ? storage_dir: '/var/backup/ngcp_backup'
> ? temp_backup_dir: '/tmp/ngcp_backup'
> ------
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/5fd074f4/attachment.html>
-------------- next part --------------
An embedded message was scrubbed...
From: Alex Lutay <alutay at sipwise.com>
Subject: Re: [Spce-user] Backup is not integrated.
Date: Fri, 26 May 2017 12:45:32 +0200
Size: 12715
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171128/5fd074f4/attachment.mht>

From winwithschwinn at gmail.com  Wed Nov 29 11:19:03 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 08:19:03 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
Message-ID: <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>

Uh... no.  Not according to the handbook:

https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf

13.1.2 The built-in backup solution
The sip:provider CE comes with an easy-to-use solution that creates
everyday backups of the most important data:

If what Alex says is true then this needs to be removed from the handbook.

On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
wrote:

> Hi Matt,
>
> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
> from Alex Lutay that he confirm that.
>
> Saludos,
> Robert Cuaresma
>
> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>
> Sending this out again.  Anyone?
>
> ---
>
> Hello All,
>
> A couple of things that may have already been discussed.  I am running CE
> mr4.5.4 and have enabled the automatic backup feature as described in the
> handbook and it seems to not be working.  Can someone give me some advice.
> The entire backuptools section was missing from my config.yml file so I
> added it manually.  I'll copy what I have below so you can take a look.  I
> ran the command "ngcpcfg apply 'enabled the backup feature'" after making
> my change but it does not seem to be working as described.
>
> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution
> section refers to "C.1.3 backup tools section of the 'NGCP configs
> overview'" which is actually located in section B.1.4.
>
> Thank you all!
>
>
> ---My backuptools config section of config.yml---
> backuptools:
>   cdrexport_backup:
>     enable: 'yes'
>   etc_backup:
>     enable: 'yes'
>   mail:
>     address: winwithschwinn at gmail.com
>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>     log_subject: '[ngcp-backup] Daily backup report'
>     send_errors: 'yes'
>     send_log: 'yes'
>   mysql_backup:
>     enable: 'yes'
>     exclude_dbs: 'syslog sipstats information_schema'
>   rotate_days: 7
>   storage_dir: '/var/backup/ngcp_backup'
>   temp_backup_dir: '/tmp/ngcp_backup'
> ------
>
>
> _______________________________________________
> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>
>
>
>
> ---------- Forwarded message ----------
> From: Alex Lutay <alutay at sipwise.com>
> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
> Cc:
> Bcc:
> Date: Fri, 26 May 2017 12:45:32 +0200
> Subject: Re: [Spce-user] Backup is not integrated.
> Hi,
>
> As Andrew Pogrebennyk wrote in a thread,
> backuptools is for PRO/Carrier only.
>
> This is why CE validation doesn't like it.
>
> On 05/25/2017 06:25 PM, Raul Alonso wrote:
> > I have same issue, If I add the section according to the documentation
> and execute: ngcpcfg --validate check
> >
> > 2017-05-25 18:23:46: Error: Invalid schema detected for
> /etc/ngcp-config/config.yml
> > /etc/ngcp-config/config.yml#0: INVALID
> >   - [/backuptools] Unexpected key 'backuptools'
>
> --
> Alex Lutay
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>


-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/9a88ac9f/attachment.html>

From dgrotti at sipwise.com  Wed Nov 29 11:35:03 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 17:35:03 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
Message-ID: <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>

Hi,
I confirm, backup tool are *not* available for CE. Only on commercial 
version.
Sorry for my previous suggestion, where I supposed backup was supported CE.

Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/29/2017 05:19 PM, Matt Schwinn wrote:
> Uh... no.? Not according to the handbook:
>
> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf 
> <https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf>
>
> 13.1.2 The built-in backup solution
> The sip:provider CE comes with an easy-to-use solution that creates 
> everyday backups of the most important data:
>
> If what Alex says is true then this needs to be removed from the handbook.
>
> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es 
> <mailto:rcuaresma at telcon.es>> wrote:
>
>     Hi Matt,
>
>     Backup tools are only available in PRO/CARRIER only. I attached a
>     e-mail from Alex Lutay that he confirm that.
>
>     Saludos,
>     Robert Cuaresma
>
>     El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>     Sending this out again.? Anyone?
>>
>>     ---
>>
>>     Hello All,
>>
>>     A couple of things that may have already been discussed.? I am
>>     running CE mr4.5.4 and have enabled the automatic backup feature
>>     as described in the handbook and it seems to not be working.? Can
>>     someone give me some advice.? The entire backuptools section was
>>     missing from my config.yml file so I added it manually.? I'll
>>     copy what I have below so you can take a look. I ran the command
>>     "ngcpcfg apply 'enabled the backup feature'" after making my
>>     change but it does not seem to be working as described.
>>
>>     Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>>     solution section refers to "C.1.3 backup tools section of the
>>     'NGCP configs overview'" which is actually located in section B.1.4.
>>
>>     Thank you all!
>>
>>
>>     ---My backuptools config section of config.yml---
>>     backuptools:
>>     ? cdrexport_backup:
>>     ??? enable: 'yes'
>>     ? etc_backup:
>>     ??? enable: 'yes'
>>     ? mail:
>>     ??? address: winwithschwinn at gmail.com
>>     <mailto:winwithschwinn at gmail.com>
>>     ??? error_subject: '[ngcp-backup] Problems detected during daily
>>     backup'
>>     ??? log_subject: '[ngcp-backup] Daily backup report'
>>     ??? send_errors: 'yes'
>>     ??? send_log: 'yes'
>>     ? mysql_backup:
>>     ??? enable: 'yes'
>>     ??? exclude_dbs: 'syslog sipstats information_schema'
>>     ? rotate_days: 7
>>     ? storage_dir: '/var/backup/ngcp_backup'
>>     ? temp_backup_dir: '/tmp/ngcp_backup'
>>     ------
>>
>>
>>     _______________________________________________
>>     Spce-user mailing list
>>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>     https://lists.sipwise.com/listinfo/spce-user
>>     <https://lists.sipwise.com/listinfo/spce-user>
>
>
>
>     ---------- Forwarded message ----------
>     From:?Alex Lutay <alutay at sipwise.com <mailto:alutay at sipwise.com>>
>     To:?Raul Alonso <raul.alonso at tpartner.net
>     <mailto:raul.alonso at tpartner.net>>, spce-user at lists.sipwise.com
>     <mailto:spce-user at lists.sipwise.com>
>     Cc:
>     Bcc:
>     Date:?Fri, 26 May 2017 12:45:32 +0200
>     Subject:?Re: [Spce-user] Backup is not integrated.
>     Hi,
>
>     As Andrew Pogrebennyk wrote in a thread,
>     backuptools is for PRO/Carrier only.
>
>     This is why CE validation doesn't like it.
>
>     On 05/25/2017 06:25 PM, Raul Alonso wrote:
>     > I have same issue, If I add the section according to the
>     documentation and execute: ngcpcfg --validate check
>     >
>     > 2017-05-25 18:23:46: Error: Invalid schema detected for
>     /etc/ngcp-config/config.yml
>     > /etc/ngcp-config/config.yml#0: INVALID
>     >? ?- [/backuptools] Unexpected key 'backuptools'
>
>     --
>     Alex Lutay
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>     <https://lists.sipwise.com/listinfo/spce-user>
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>     <https://lists.sipwise.com/listinfo/spce-user>
>
>
>
>
> -- 
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
> ????? and
> Company B
> 209-202-3329
> www.TCGTechLLC.com <http://www.TCGTechLLC.com>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/8c33fd54/attachment.html>

From winwithschwinn at gmail.com  Wed Nov 29 11:37:57 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 08:37:57 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
Message-ID: <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>

Again, the user manual states that it 'is' included in CE.  Can we get
clarification on this please?

On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:

> Hi,
> I confirm, backup tool are *not* available for CE. Only on commercial
> version.
> Sorry for my previous suggestion, where I supposed backup was supported CE.
>
> Cheers,
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>
> Uh... no.  Not according to the handbook:
>
> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>
> 13.1.2 The built-in backup solution
> The sip:provider CE comes with an easy-to-use solution that creates
> everyday backups of the most important data:
>
> If what Alex says is true then this needs to be removed from the handbook.
>
> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
> wrote:
>
>> Hi Matt,
>>
>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>> from Alex Lutay that he confirm that.
>>
>> Saludos,
>> Robert Cuaresma
>>
>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>
>> Sending this out again.  Anyone?
>>
>> ---
>>
>> Hello All,
>>
>> A couple of things that may have already been discussed.  I am running CE
>> mr4.5.4 and have enabled the automatic backup feature as described in the
>> handbook and it seems to not be working.  Can someone give me some advice.
>> The entire backuptools section was missing from my config.yml file so I
>> added it manually.  I'll copy what I have below so you can take a look.  I
>> ran the command "ngcpcfg apply 'enabled the backup feature'" after making
>> my change but it does not seem to be working as described.
>>
>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>> overview'" which is actually located in section B.1.4.
>>
>> Thank you all!
>>
>>
>> ---My backuptools config section of config.yml---
>> backuptools:
>>   cdrexport_backup:
>>     enable: 'yes'
>>   etc_backup:
>>     enable: 'yes'
>>   mail:
>>     address: winwithschwinn at gmail.com
>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>     log_subject: '[ngcp-backup] Daily backup report'
>>     send_errors: 'yes'
>>     send_log: 'yes'
>>   mysql_backup:
>>     enable: 'yes'
>>     exclude_dbs: 'syslog sipstats information_schema'
>>   rotate_days: 7
>>   storage_dir: '/var/backup/ngcp_backup'
>>   temp_backup_dir: '/tmp/ngcp_backup'
>> ------
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Alex Lutay <alutay at sipwise.com>
>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>> Cc:
>> Bcc:
>> Date: Fri, 26 May 2017 12:45:32 +0200
>> Subject: Re: [Spce-user] Backup is not integrated.
>> Hi,
>>
>> As Andrew Pogrebennyk wrote in a thread,
>> backuptools is for PRO/Carrier only.
>>
>> This is why CE validation doesn't like it.
>>
>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>> > I have same issue, If I add the section according to the documentation
>> and execute: ngcpcfg --validate check
>> >
>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>> /etc/ngcp-config/config.yml
>> > /etc/ngcp-config/config.yml#0: INVALID
>> >   - [/backuptools] Unexpected key 'backuptools'
>>
>> --
>> Alex Lutay
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
>
> _______________________________________________
> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>


-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/7bcf234c/attachment.html>

From manwe at sipdoc.net  Wed Nov 29 14:46:18 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Wed, 29 Nov 2017 20:46:18 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
Message-ID: <20171129204618.4c5fd521@multivac>

El Wed, 29 Nov 2017 11:50:26 +0100
Daniel Grotti <dgrotti at sipwise.com> escribi?:

> Hi Stefano,
> 
> You can configure as peer->subscriber.
> On SPCE 1:
> - you configure SPCE 2 as peering server with authenticatio
> 
> On SPCE 2:
> - you configure SPCE 1 as Subscriber.
> 
> 

would that setup work on both directions?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/db96cc24/attachment.sig>

From barry at flanagan.ie  Wed Nov 29 15:09:06 2017
From: barry at flanagan.ie (Barry Flanagan)
Date: Wed, 29 Nov 2017 20:09:06 +0000
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <20171129204618.4c5fd521@multivac>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
Message-ID: <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>

On 29 November 2017 at 19:46, Jon Bonilla (Manwe) <manwe at sipdoc.net> wrote:

> El Wed, 29 Nov 2017 11:50:26 +0100
> Daniel Grotti <dgrotti at sipwise.com> escribi?:
>
> > Hi Stefano,
> >
> > You can configure as peer->subscriber.
> > On SPCE 1:
> > - you configure SPCE 2 as peering server with authenticatio
> >
> > On SPCE 2:
> > - you configure SPCE 1 as Subscriber.
> >
> >
>
> would that setup work on both directions?
>
>
>
I think you would also need to do the reverse as well, so both SPCE have a
peer to the other for outbound, and a subscriber for the inbound. Peers and
Subscribers would need to use authentication as mentioned above, so that
they don't get mixed up.

Alternatively, I think you can set allow_peer_relay to "yes" in
/etc/ngcp-config/config.yml which would allow a call to come in from one
peer and get sent out to another peer (based on routing rules), although
this only would work if you did not need to bill, as peer-to-peer does not
get billed.

-Barry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/6f3f3be1/attachment.html>

From manwe at sipdoc.net  Wed Nov 29 15:49:43 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Wed, 29 Nov 2017 21:49:43 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
Message-ID: <20171129214943.3a6c60f9@multivac>

El Wed, 29 Nov 2017 20:09:06 +0000
Barry Flanagan <barry at flanagan.ie> escribi?:


> >
> >  
> I think you would also need to do the reverse as well, so both SPCE have a
> peer to the other for outbound, and a subscriber for the inbound. Peers and
> Subscribers would need to use authentication as mentioned above, so that
> they don't get mixed up.
> 
> Alternatively, I think you can set allow_peer_relay to "yes" in
> /etc/ngcp-config/config.yml which would allow a call to come in from one
> peer and get sent out to another peer (based on routing rules), although
> this only would work if you did not need to bill, as peer-to-peer does not
> get billed.
> 
>

If you set another system as peer and subscriber when an incoming call comes it
will be detected as peer and won't be authenticated. No need for authenticate
the peer, right?

Maybe it could work, yes. You would send via subscriber with permanent contact
and it would be detected as incoming form peer in the other side. No need for
enable_peer_relay in that case. 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/81e692b5/attachment.sig>

From stefanormc at gmail.com  Wed Nov 29 15:58:15 2017
From: stefanormc at gmail.com (stefanormc)
Date: Wed, 29 Nov 2017 12:58:15 -0800
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <20171129214943.3a6c60f9@multivac>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
Message-ID: <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>

Hi all, thanks for the support.

Trial is working, tomorrow I?ll check in production. I don?t think you have
to setup 2 peers but I think you have to set all aliases subscriber side to
route calls correctly.

I?m using mr5.4.1
<https://centrale03.avanzati.it:1443/statistics/versions>
Please note that on this version peer_auth only works manually as described
on documentation

Thanks

Ciao

Stefano

On 29 November 2017 at 21:49:53, Jon Bonilla (Manwe) (manwe at sipdoc.net)
wrote:

El Wed, 29 Nov 2017 20:09:06 +0000
Barry Flanagan <barry at flanagan.ie> escribi?:


> >
> >
> I think you would also need to do the reverse as well, so both SPCE have
a
> peer to the other for outbound, and a subscriber for the inbound. Peers
and
> Subscribers would need to use authentication as mentioned above, so that
> they don't get mixed up.
>
> Alternatively, I think you can set allow_peer_relay to "yes" in
> /etc/ngcp-config/config.yml which would allow a call to come in from one
> peer and get sent out to another peer (based on routing rules), although
> this only would work if you did not need to bill, as peer-to-peer does
not
> get billed.
>
>

If you set another system as peer and subscriber when an incoming call
comes it
will be detected as peer and won't be authenticated. No need for
authenticate
the peer, right?

Maybe it could work, yes. You would send via subscriber with permanent
contact
and it would be detected as incoming form peer in the other side. No need
for
enable_peer_relay in that case.
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/ae25a0f3/attachment.html>

From davidp at csr-online.net  Wed Nov 29 16:19:48 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Wed, 29 Nov 2017 21:19:48 +0000
Subject: [Spce-user] i can't create invoices help please
Message-ID: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>

I try with all reseller,s customers and the error always the same in version 5.5.1

In panel.log the error was:

Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""


Thank you very much



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355 ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From walter at myrepublic.net  Wed Nov 29 20:11:24 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 09:11:24 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
Message-ID: <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>

I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 

Yours sincerely,
Walter

> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
> 
>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>> Hi,
>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>> 
>> Cheers,
>> 
>>  -- 
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>> 
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>> 
>>> Uh... no.  Not according to the handbook:
>>> 
>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>> 
>>> 13.1.2 The built-in backup solution
>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>> 
>>> If what Alex says is true then this needs to be removed from the handbook.
>>> 
>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>> Hi Matt, 
>>>> 
>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>> 
>>>> Saludos,
>>>> Robert Cuaresma
>>>> 
>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>> Sending this out again.  Anyone?
>>>>> 
>>>>> ---
>>>>> 
>>>>> Hello All,
>>>>> 
>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>> 
>>>>> Also, the handbook for 4.5.4 under the 13.1.2                         The built-in backup solution section refers to                         "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>> 
>>>>> Thank you all!
>>>>> 
>>>>> 
>>>>> ---My backuptools config section of config.yml---
>>>>> backuptools:
>>>>>   cdrexport_backup:
>>>>>     enable: 'yes'
>>>>>   etc_backup:
>>>>>     enable: 'yes'
>>>>>   mail:
>>>>>     address: winwithschwinn at gmail.com
>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>     send_errors: 'yes'
>>>>>     send_log: 'yes'
>>>>>   mysql_backup:
>>>>>     enable: 'yes'
>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>   rotate_days: 7
>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>> ------
>>>>> 
>>>>> 
>>>>>  _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Alex Lutay <alutay at sipwise.com>
>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>> Cc: 
>>>> Bcc: 
>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>> Hi,
>>>> 
>>>> As Andrew Pogrebennyk wrote in a thread,
>>>> backuptools is for PRO/Carrier only.
>>>> 
>>>> This is why CE validation doesn't like it.
>>>> 
>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>> >
>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>> 
>>>> --
>>>> Alex Lutay
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Enjoy the day!
>>> Matt Schwinn
>>> TCG Technologies LLC 
>>>       and
>>> Company B
>>> 209-202-3329
>>> www.TCGTechLLC.com
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>> 
>> 
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>> 
> 
> 
> 
> -- 
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC 
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/8943c4c4/attachment.html>

From winwithschwinn at gmail.com  Wed Nov 29 20:17:28 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 17:17:28 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
Message-ID: <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>

Hi Walter,

Did you have to do anything for it to work?

On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:

I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So
it is included afaik.

Yours sincerely,
Walter

On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:

Again, the user manual states that it 'is' included in CE.  Can we get
clarification on this please?

On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:

> Hi,
> I confirm, backup tool are *not* available for CE. Only on commercial
> version.
> Sorry for my previous suggestion, where I supposed backup was supported CE.
>
> Cheers,
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>
> Uh... no.  Not according to the handbook:
>
> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>
> 13.1.2 The built-in backup solution
> The sip:provider CE comes with an easy-to-use solution that creates
> everyday backups of the most important data:
>
> If what Alex says is true then this needs to be removed from the handbook.
>
> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
> wrote:
>
>> Hi Matt,
>>
>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>> from Alex Lutay that he confirm that.
>>
>> Saludos,
>> Robert Cuaresma
>>
>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>
>> Sending this out again.  Anyone?
>>
>> ---
>>
>> Hello All,
>>
>> A couple of things that may have already been discussed.  I am running CE
>> mr4.5.4 and have enabled the automatic backup feature as described in the
>> handbook and it seems to not be working.  Can someone give me some advice.
>> The entire backuptools section was missing from my config.yml file so I
>> added it manually.  I'll copy what I have below so you can take a look.  I
>> ran the command "ngcpcfg apply 'enabled the backup feature'" after making
>> my change but it does not seem to be working as described.
>>
>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>> overview'" which is actually located in section B.1.4.
>>
>> Thank you all!
>>
>>
>> ---My backuptools config section of config.yml---
>> backuptools:
>>   cdrexport_backup:
>>     enable: 'yes'
>>   etc_backup:
>>     enable: 'yes'
>>   mail:
>>     address: winwithschwinn at gmail.com
>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>     log_subject: '[ngcp-backup] Daily backup report'
>>     send_errors: 'yes'
>>     send_log: 'yes'
>>   mysql_backup:
>>     enable: 'yes'
>>     exclude_dbs: 'syslog sipstats information_schema'
>>   rotate_days: 7
>>   storage_dir: '/var/backup/ngcp_backup'
>>   temp_backup_dir: '/tmp/ngcp_backup'
>> ------
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Alex Lutay <alutay at sipwise.com>
>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>> Cc:
>> Bcc:
>> Date: Fri, 26 May 2017 12:45:32 +0200
>> Subject: Re: [Spce-user] Backup is not integrated.
>> Hi,
>>
>> As Andrew Pogrebennyk wrote in a thread,
>> backuptools is for PRO/Carrier only.
>>
>> This is why CE validation doesn't like it.
>>
>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>> > I have same issue, If I add the section according to the documentation
>> and execute: ngcpcfg --validate check
>> >
>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>> /etc/ngcp-config/config.yml
>> > /etc/ngcp-config/config.yml#0: INVALID
>> >   - [/backuptools] Unexpected key 'backuptools'
>>
>> --
>> Alex Lutay
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
>
> _______________________________________________
> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>


-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com

_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/52d82945/attachment.html>

From walter at myrepublic.net  Wed Nov 29 20:30:51 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 09:30:51 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
Message-ID: <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>

Nope. I actually had to explicitly switch it off because it cleans up too much too early. 

Yours sincerely,
Walter

> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> Hi Walter,
> 
> Did you have to do anything for it to work?
> 
> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
> I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 
> 
> Yours sincerely,
> Walter
> 
>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>> 
>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>> 
>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>>> Hi,
>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>> 
>>> Cheers,
>>> 
>>>  -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>> 
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com
>>> Website: https://www.sipwise.com
>>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>> 
>>>> Uh... no.  Not according to the handbook:
>>>> 
>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>> 
>>>> 13.1.2 The built-in backup solution
>>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>> 
>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>> 
>>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>>> Hi Matt, 
>>>>> 
>>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>>> 
>>>>> Saludos,
>>>>> Robert Cuaresma
>>>>> 
>>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>>> Sending this out again.  Anyone?
>>>>>> 
>>>>>> ---
>>>>>> 
>>>>>> Hello All,
>>>>>> 
>>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>>> 
>>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>>> 
>>>>>> Thank you all!
>>>>>> 
>>>>>> 
>>>>>> ---My backuptools config section of config.yml---
>>>>>> backuptools:
>>>>>>   cdrexport_backup:
>>>>>>     enable: 'yes'
>>>>>>   etc_backup:
>>>>>>     enable: 'yes'
>>>>>>   mail:
>>>>>>     address: winwithschwinn at gmail.com
>>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>>     send_errors: 'yes'
>>>>>>     send_log: 'yes'
>>>>>>   mysql_backup:
>>>>>>     enable: 'yes'
>>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>>   rotate_days: 7
>>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>>> ------
>>>>>> 
>>>>>> 
>>>>>>  _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>>> 
>>>>> 
>>>>> ---------- Forwarded message ----------
>>>>> From: Alex Lutay <alutay at sipwise.com>
>>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>>> Cc: 
>>>>> Bcc: 
>>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>>> Hi,
>>>>> 
>>>>> As Andrew Pogrebennyk wrote in a thread,
>>>>> backuptools is for PRO/Carrier only.
>>>>> 
>>>>> This is why CE validation doesn't like it.
>>>>> 
>>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>>> >
>>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>>> 
>>>>> --
>>>>> Alex Lutay
>>>>> 
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Enjoy the day!
>>>> Matt Schwinn
>>>> TCG Technologies LLC 
>>>>       and
>>>> Company B
>>>> 209-202-3329
>>>> www.TCGTechLLC.com
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>> 
>> 
>> 
>> -- 
>> Enjoy the day!
>> Matt Schwinn
>> TCG Technologies LLC 
>>       and
>> Company B
>> 209-202-3329
>> www.TCGTechLLC.com
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/97310803/attachment.html>

From winwithschwinn at gmail.com  Wed Nov 29 20:53:18 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 17:53:18 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
Message-ID: <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>

How strange.  I didn't even have the backuptools section in my config.yml
file.

On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net> wrote:

> Nope. I actually had to explicitly switch it off because it cleans up too
> much too early.
>
> Yours sincerely,
> Walter
>
> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>
> Hi Walter,
>
> Did you have to do anything for it to work?
>
> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>
> I can tell you that on my 3.8 and 4.5 installations backup ?just works?.
> So it is included afaik.
>
> Yours sincerely,
> Walter
>
> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com>
> wrote:
>
> Again, the user manual states that it 'is' included in CE.  Can we get
> clarification on this please?
>
> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com>
> wrote:
>
>> Hi,
>> I confirm, backup tool are *not* available for CE. Only on commercial
>> version.
>> Sorry for my previous suggestion, where I supposed backup was supported
>> CE.
>>
>> Cheers,
>>
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>>
>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>
>> Uh... no.  Not according to the handbook:
>>
>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>
>> 13.1.2 The built-in backup solution
>> The sip:provider CE comes with an easy-to-use solution that creates
>> everyday backups of the most important data:
>>
>> If what Alex says is true then this needs to be removed from the handbook.
>>
>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
>> wrote:
>>
>>> Hi Matt,
>>>
>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>>> from Alex Lutay that he confirm that.
>>>
>>> Saludos,
>>> Robert Cuaresma
>>>
>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>
>>> Sending this out again.  Anyone?
>>>
>>> ---
>>>
>>> Hello All,
>>>
>>> A couple of things that may have already been discussed.  I am running
>>> CE mr4.5.4 and have enabled the automatic backup feature as described in
>>> the handbook and it seems to not be working.  Can someone give me some
>>> advice.  The entire backuptools section was missing from my config.yml file
>>> so I added it manually.  I'll copy what I have below so you can take a
>>> look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after
>>> making my change but it does not seem to be working as described.
>>>
>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>>> overview'" which is actually located in section B.1.4.
>>>
>>> Thank you all!
>>>
>>>
>>> ---My backuptools config section of config.yml---
>>> backuptools:
>>>   cdrexport_backup:
>>>     enable: 'yes'
>>>   etc_backup:
>>>     enable: 'yes'
>>>   mail:
>>>     address: winwithschwinn at gmail.com
>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>     send_errors: 'yes'
>>>     send_log: 'yes'
>>>   mysql_backup:
>>>     enable: 'yes'
>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>   rotate_days: 7
>>>   storage_dir: '/var/backup/ngcp_backup'
>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>> ------
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Alex Lutay <alutay at sipwise.com>
>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>> Cc:
>>> Bcc:
>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>> Subject: Re: [Spce-user] Backup is not integrated.
>>> Hi,
>>>
>>> As Andrew Pogrebennyk wrote in a thread,
>>> backuptools is for PRO/Carrier only.
>>>
>>> This is why CE validation doesn't like it.
>>>
>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>> > I have same issue, If I add the section according to the documentation
>>> and execute: ngcpcfg --validate check
>>> >
>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>>> /etc/ngcp-config/config.yml
>>> > /etc/ngcp-config/config.yml#0: INVALID
>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>
>>> --
>>> Alex Lutay
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>
>>
>> --
>> Enjoy the day!
>> Matt Schwinn
>> TCG Technologies LLC
>>       and
>> Company B
>> 209-202-3329
>> www.TCGTechLLC.com
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171129/01c75fb1/attachment.html>

From walter at myrepublic.net  Wed Nov 29 21:24:49 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 10:24:49 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
Message-ID: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>

They were in mine, but yes, if you installed a later 4.5 from scratch they are not there, but then if you copy them from another instance, things just start to magically work...



> On 30 Nov 2017, at 9:53 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> How strange.  I didn't even have the backuptools section in my config.yml file.
> 
> On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net <mailto:walter at myrepublic.net>> wrote:
> Nope. I actually had to explicitly switch it off because it cleans up too much too early. 
> 
> Yours sincerely,
> Walter
> 
> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>> wrote:
> 
>> Hi Walter,
>> 
>> Did you have to do anything for it to work?
>> 
>> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net <mailto:walter at myrepublic.net>> wrote:
>> I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 
>> 
>> Yours sincerely,
>> Walter
>> 
>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>> wrote:
>> 
>>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>>> 
>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>>> Hi,
>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>> 
>>> Cheers,
>>> 
>>>  -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>> 
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
>>> Website: https://www.sipwise.com <https://www.sipwise.com/>
>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>> 
>>>> Uh... no.  Not according to the handbook:
>>>> 
>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf <https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf>
>>>> 
>>>> 13.1.2 The built-in backup solution
>>>> The sip:provider <> CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>> 
>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>> 
>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es <mailto:rcuaresma at telcon.es>> wrote:
>>>> Hi Matt, 
>>>> 
>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>> 
>>>> Saludos,
>>>> Robert Cuaresma
>>>> 
>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>> Sending this out again.  Anyone?
>>>>> 
>>>>> ---
>>>>> 
>>>>> Hello All,
>>>>> 
>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>> 
>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>> 
>>>>> Thank you all!
>>>>> 
>>>>> 
>>>>> ---My backuptools config section of config.yml---
>>>>> backuptools:
>>>>>   cdrexport_backup:
>>>>>     enable: 'yes'
>>>>>   etc_backup:
>>>>>     enable: 'yes'
>>>>>   mail:
>>>>>     address: winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>
>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>     send_errors: 'yes'
>>>>>     send_log: 'yes'
>>>>>   mysql_backup:
>>>>>     enable: 'yes'
>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>   rotate_days: 7
>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>> ------
>>>>> 
>>>>> 
>>>>>  _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Alex Lutay <alutay at sipwise.com <mailto:alutay at sipwise.com>>
>>>> To: Raul Alonso <raul.alonso at tpartner.net <mailto:raul.alonso at tpartner.net>>, spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>>>> Cc: 
>>>> Bcc: 
>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>> Hi,
>>>> 
>>>> As Andrew Pogrebennyk wrote in a thread,
>>>> backuptools is for PRO/Carrier only.
>>>> 
>>>> This is why CE validation doesn't like it.
>>>> 
>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>> >
>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>> 
>>>> --
>>>> Alex Lutay
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Enjoy the day!
>>>> Matt Schwinn
>>>> TCG Technologies LLC 
>>>>       and
>>>> Company B
>>>> 209-202-3329
>>>> www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Enjoy the day!
>>> Matt Schwinn
>>> TCG Technologies LLC 
>>>       and
>>> Company B
>>> 209-202-3329
>>> www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/f4c3456d/attachment.html>

From dgrotti at sipwise.com  Thu Nov 30 03:22:37 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 09:22:37 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
Message-ID: <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>

Hi Stefano,
you can just route calls to the other peer via subscribers aliases, indeed.


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/29/2017 09:58 PM, stefanormc wrote:
> Hi all, thanks for the support.
>
> Trial is working, tomorrow I?ll check in production. I don?t think you 
> have to setup 2 peers but I think you have to set all aliases 
> subscriber side to route calls correctly.
>
> I?m using mr5.4.1
> <https://centrale03.avanzati.it:1443/statistics/versions>
> Please note that on this version peer_auth only works manually as 
> described on documentation
>
> Thanks
>
> Ciao
>
> Stefano
>
> On 29 November 2017 at 21:49:53, Jon Bonilla (Manwe) (manwe at sipdoc.net 
> <mailto:manwe at sipdoc.net>) wrote:
>
>> El Wed, 29 Nov 2017 20:09:06 +0000
>> Barry Flanagan <barry at flanagan.ie <mailto:barry at flanagan.ie>> escribi?:
>>
>>
>> > >
>> > >
>> > I think you would also need to do the reverse as well, so both SPCE 
>> have a
>> > peer to the other for outbound, and a subscriber for the inbound. 
>> Peers and
>> > Subscribers would need to use authentication as mentioned above, so 
>> that
>> > they don't get mixed up.
>> >
>> > Alternatively, I think you can set allow_peer_relay to "yes" in
>> > /etc/ngcp-config/config.yml which would allow a call to come in 
>> from one
>> > peer and get sent out to another peer (based on routing rules), 
>> although
>> > this only would work if you did not need to bill, as peer-to-peer 
>> does not
>> > get billed.
>> >
>> >
>>
>> If you set another system as peer and subscriber when an incoming 
>> call comes it
>> will be detected as peer and won't be authenticated. No need for 
>> authenticate
>> the peer, right?
>>
>> Maybe it could work, yes. You would send via subscriber with 
>> permanent contact
>> and it would be detected as incoming form peer in the other side. No 
>> need for
>> enable_peer_relay in that case.
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/9dc8e8ad/attachment.html>

From me at nevian.org  Thu Nov 30 04:13:57 2017
From: me at nevian.org (Serge S. Yuriev)
Date: Thu, 30 Nov 2017 12:13:57 +0300
Subject: [Spce-user] Backup... Second try
In-Reply-To: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
Message-ID: <83571512033237@web36o.yandex.ru>

An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/c3833bbf/attachment.html>

From dgrotti at sipwise.com  Thu Nov 30 04:43:43 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 10:43:43 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <83571512033237@web36o.yandex.ru>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
Message-ID: <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>

Hi all,
Package ngcp-backup-tools, containing the backup feature is *not* part 
of CE and it is not covered by GPL licence, so this *should* not be 
present in any CE.
Starting from mr5.0 you will see backuptool section in your config.yml, 
this is on purpose and correct, since we are aligning configuration 
between PRO an CE. But if you change something there, nothing will 
happen, since there is no package installed.

Please check in your SPCE the following output from the command:

dpkg -l | grep backup-tools


If you get an output, please share it and then remove that package.
As far as we know from our internal checks, backup-tools package is not 
present at all in any CE repo, so we would really like to understand how 
and where you get that package.

Regarding Handbook saying backup script are included in CE, this is a 
wrong statement and we are going to fix it. Thanks for let us know.

Regards,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 10:13 AM, Serge S. Yuriev wrote:
> Hi,
>
> Strange my experience quite opposite - section does exists but backup 
> not working in 3.8,?4.5 and 5.x series..
>
> -- 
> Wbr, Serge via mobile
>
> 30.11.2017, 05:25, "Walter Klomp" <walter at myrepublic.net>:
>> They were in mine, but yes, if you installed a later 4.5 from scratch 
>> they are not there, but then if you copy them from another instance, 
>> things just start to magically work...
>>
>>
>>
>>> On 30 Nov 2017, at 9:53 AM, Matt Schwinn <winwithschwinn at gmail.com 
>>> <mailto:winwithschwinn at gmail.com>> wrote:
>>>
>>> How strange.? I didn't even have the backuptools section in my 
>>> config.yml file.
>>>
>>> On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net 
>>> <mailto:walter at myrepublic.net>> wrote:
>>>
>>>     Nope. I actually had to explicitly switch it off because it
>>>     cleans up too much too early.
>>>
>>>     Yours sincerely,
>>>     Walter
>>>
>>>     On 30 Nov 2017, at 9:17 AM, Matt Schwinn
>>>     <winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>> wrote:
>>>
>>>>     Hi Walter,
>>>>
>>>>     Did you have to do anything for it to work?
>>>>
>>>>     On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net
>>>>     <mailto:walter at myrepublic.net>> wrote:
>>>>
>>>>         I can tell you that on my 3.8 and 4.5 installations backup
>>>>         ?just works?. So it is included afaik.
>>>>
>>>>         Yours sincerely,
>>>>         Walter
>>>>
>>>>         On 30 Nov 2017, at 12:37 AM, Matt Schwinn
>>>>         <winwithschwinn at gmail.com
>>>>         <mailto:winwithschwinn at gmail.com>> wrote:
>>>>
>>>>>         Again, the user manual states that it 'is' included in
>>>>>         CE.? Can we get clarification on this please?
>>>>>
>>>>>         On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti
>>>>>         <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>>>>>
>>>>>             Hi,
>>>>>             I confirm, backup tool are *not* available for CE.
>>>>>             Only on commercial version.
>>>>>             Sorry for my previous suggestion, where I supposed
>>>>>             backup was supported CE.
>>>>>
>>>>>             Cheers,
>>>>>
>>>>>             -- 
>>>>>             Daniel Grotti
>>>>>             Head of Customer Support
>>>>>             Sipwise GmbH, Campus 21/Europaring F15
>>>>>             AT-2345 Brunn am Gebirge
>>>>>
>>>>>             Office:+43(0)130120332 <tel:+43130120332>
>>>>>             Email:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
>>>>>             Website:https://www.sipwise.com <https://www.sipwise.com/>
>>>>>
>>>>>             On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>>>>             Uh... no.? Not according to the handbook:
>>>>>>
>>>>>>             https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>>>>             <https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf>
>>>>>>
>>>>>>             13.1.2 The built-in backup solution
>>>>>>             The sip:provider CE comes with an easy-to-use
>>>>>>             solution that creates everyday backups of the most
>>>>>>             important data:
>>>>>>
>>>>>>             If what Alex says is true then this needs to be
>>>>>>             removed from the handbook.
>>>>>>
>>>>>>             On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma
>>>>>>             <rcuaresma at telcon.es <mailto:rcuaresma at telcon.es>> wrote:
>>>>>>
>>>>>>                 Hi Matt,
>>>>>>
>>>>>>                 Backup tools are only available in PRO/CARRIER
>>>>>>                 only. I attached a e-mail from Alex Lutay that he
>>>>>>                 confirm that.
>>>>>>
>>>>>>                 Saludos,
>>>>>>                 Robert Cuaresma
>>>>>>
>>>>>>                 El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>>>>                 Sending this out again. Anyone?
>>>>>>>
>>>>>>>                 ---
>>>>>>>
>>>>>>>                 Hello All,
>>>>>>>
>>>>>>>                 A couple of things that may have already been
>>>>>>>                 discussed.? I am running CE mr4.5.4 and have
>>>>>>>                 enabled the automatic backup feature as
>>>>>>>                 described in the handbook and it seems to not be
>>>>>>>                 working.? Can someone give me some advice.? The
>>>>>>>                 entire backuptools section was missing from my
>>>>>>>                 config.yml file so I added it manually. I'll
>>>>>>>                 copy what I have below so you can take a look. I
>>>>>>>                 ran the command "ngcpcfg apply 'enabled the
>>>>>>>                 backup feature'" after making my change but it
>>>>>>>                 does not seem to be working as described.
>>>>>>>
>>>>>>>                 Also, the handbook for 4.5.4 under the 13.1.2
>>>>>>>                 The built-in backup solution section refers to
>>>>>>>                 "C.1.3 backup tools section of the 'NGCP configs
>>>>>>>                 overview'" which is actually located in section
>>>>>>>                 B.1.4.
>>>>>>>
>>>>>>>                 Thank you all!
>>>>>>>
>>>>>>>
>>>>>>>                 ---My backuptools config section of config.yml---
>>>>>>>                 backuptools:
>>>>>>>                 cdrexport_backup:
>>>>>>>                 ??? enable: 'yes'
>>>>>>>                 ? etc_backup:
>>>>>>>                 ??? enable: 'yes'
>>>>>>>                 ? mail:
>>>>>>>                 ??? address: winwithschwinn at gmail.com
>>>>>>>                 <mailto:winwithschwinn at gmail.com>
>>>>>>>                 error_subject: '[ngcp-backup] Problems detected
>>>>>>>                 during daily backup'
>>>>>>>                 log_subject: '[ngcp-backup] Daily backup report'
>>>>>>>                 send_errors: 'yes'
>>>>>>>                 ??? send_log: 'yes'
>>>>>>>                 mysql_backup:
>>>>>>>                 ??? enable: 'yes'
>>>>>>>                 exclude_dbs: 'syslog sipstats information_schema'
>>>>>>>                 ? rotate_days: 7
>>>>>>>                 ? storage_dir: '/var/backup/ngcp_backup'
>>>>>>>                 temp_backup_dir: '/tmp/ngcp_backup'
>>>>>>>                 ------
>>>>>>>
>>>>>>>
>>>>>>>                 _______________________________________________
>>>>>>>                 Spce-user mailing list
>>>>>>>                 Spce-user at lists.sipwise.com
>>>>>>>                 <mailto:Spce-user at lists.sipwise.com>
>>>>>>>                 https://lists.sipwise.com/listinfo/spce-user
>>>>>>>                 <https://lists.sipwise.com/listinfo/spce-user>
>>>>>>
>>>>>>
>>>>>>
>>>>>>                 ---------- Forwarded message ----------
>>>>>>                 From:?Alex Lutay <alutay at sipwise.com
>>>>>>                 <mailto:alutay at sipwise.com>>
>>>>>>                 To:?Raul Alonso <raul.alonso at tpartner.net
>>>>>>                 <mailto:raul.alonso at tpartner.net>>,
>>>>>>                 spce-user at lists.sipwise.com
>>>>>>                 <mailto:spce-user at lists.sipwise.com>
>>>>>>                 Cc:
>>>>>>                 Bcc:
>>>>>>                 Date:?Fri, 26 May 2017 12:45:32 +0200
>>>>>>                 Subject:?Re: [Spce-user] Backup is not integrated.
>>>>>>                 Hi,
>>>>>>
>>>>>>                 As Andrew Pogrebennyk wrote in a thread,
>>>>>>                 backuptools is for PRO/Carrier only.
>>>>>>
>>>>>>                 This is why CE validation doesn't like it.
>>>>>>
>>>>>>                 On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>>>                 > I have same issue, If I add the section
>>>>>>                 according to the documentation and execute:
>>>>>>                 ngcpcfg --validate check
>>>>>>                 >
>>>>>>                 > 2017-05-25 18:23:46: Error: Invalid schema
>>>>>>                 detected for /etc/ngcp-config/config.yml
>>>>>>                 > /etc/ngcp-config/config.yml#0: INVALID
>>>>>>                 >? ?- [/backuptools] Unexpected key 'backuptools'
>>>>>>
>>>>>>                 --
>>>>>>                 Alex Lutay
>>>>>>
>>>>>>                 _______________________________________________
>>>>>>                 Spce-user mailing list
>>>>>>                 Spce-user at lists.sipwise.com
>>>>>>                 <mailto:Spce-user at lists.sipwise.com>
>>>>>>                 https://lists.sipwise.com/listinfo/spce-user
>>>>>>                 <https://lists.sipwise.com/listinfo/spce-user>
>>>>>>
>>>>>>                 _______________________________________________
>>>>>>                 Spce-user mailing list
>>>>>>                 Spce-user at lists.sipwise.com
>>>>>>                 <mailto:Spce-user at lists.sipwise.com>
>>>>>>                 https://lists.sipwise.com/listinfo/spce-user
>>>>>>                 <https://lists.sipwise.com/listinfo/spce-user>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>             -- 
>>>>>>             Enjoy the day!
>>>>>>             Matt Schwinn
>>>>>>             TCG Technologies LLC
>>>>>>             ????? and
>>>>>>             Company B
>>>>>>             209-202-3329 <tel:209-202-3329>
>>>>>>             www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>>>>>
>>>>>>
>>>>>>             _______________________________________________
>>>>>>             Spce-user mailing list
>>>>>>             Spce-user at lists.sipwise.com
>>>>>>             <mailto:Spce-user at lists.sipwise.com>
>>>>>>             https://lists.sipwise.com/listinfo/spce-user
>>>>>>             <https://lists.sipwise.com/listinfo/spce-user>
>>>>>
>>>>>
>>>>>             _______________________________________________
>>>>>             Spce-user mailing list
>>>>>             Spce-user at lists.sipwise.com
>>>>>             <mailto:Spce-user at lists.sipwise.com>
>>>>>             https://lists.sipwise.com/listinfo/spce-user
>>>>>             <https://lists.sipwise.com/listinfo/spce-user>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>         -- 
>>>>>         Enjoy the day!
>>>>>         Matt Schwinn
>>>>>         TCG Technologies LLC
>>>>>         ????? and
>>>>>         Company B
>>>>>         209-202-3329 <tel:209-202-3329>
>>>>>         www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>>>>         _______________________________________________
>>>>>         Spce-user mailing list
>>>>>         Spce-user at lists.sipwise.com
>>>>>         <mailto:Spce-user at lists.sipwise.com>
>>>>>         https://lists.sipwise.com/listinfo/spce-user
>>>>>         <https://lists.sipwise.com/listinfo/spce-user>
>>>>
>>>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/02d3c06f/attachment.html>

From manwe at sipdoc.net  Thu Nov 30 04:59:27 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Thu, 30 Nov 2017 10:59:27 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
 <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
Message-ID: <20171130105927.0e92108b@multivac>

El Thu, 30 Nov 2017 10:43:43 +0100
Daniel Grotti <dgrotti at sipwise.com> escribi?:

> Starting from mr5.0 you will see backuptool section in your config.yml, 
> this is on purpose and correct, since we are aligning configuration 
> between PRO an CE. But if you change something there, nothing will 
> happen, since there is no package installed.

What's the point of having yml sections in CE that won't work? I understand
that it's easier for developers but unless you create a pro.yml of something
you'll only confuse CE users who will configure disabled sections without
notice.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/0c3ec83e/attachment.sig>

From walter at myrepublic.net  Thu Nov 30 05:08:34 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 18:08:34 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
 <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
Message-ID: <E55E249E-0896-441B-857C-02121D743E0E@myrepublic.net>

Yes, don?t have that package anywhere.  Probably I am confused with the sql backups that get generated and the cdr being exported and removed from sql server, cleanup tools...

Yours sincerely,

Walter Klomp


> On 30 Nov 2017, at 17:43, Daniel Grotti <dgrotti at sipwise.com> wrote:
> 
> Hi all,
> Package ngcp-backup-tools, containing the backup feature is *not* part of CE and it is not covered by GPL licence, so this *should* not be present in any CE.
> Starting from mr5.0 you will see backuptool section in your config.yml, this is on purpose and correct, since we are aligning configuration between PRO an CE. But if you change something there, nothing will happen, since there is no package installed.
> 
> Please check in your SPCE the following output from the command:
> 
> dpkg -l | grep backup-tools
> 
> 
> If you get an output, please share it and then remove that package.
> As far as we know from our internal checks, backup-tools package is not present at all in any CE repo, so we would really like to understand how and where you get that package.
> 
> Regarding Handbook saying backup script are included in CE, this is a wrong statement and we are going to fix it. Thanks for let us know.
> 
> Regards,
> 
>  -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
> 
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>> On 11/30/2017 10:13 AM, Serge S. Yuriev wrote:
>> Hi,
>> 
>> Strange my experience quite opposite - section does exists but backup not working in 3.8, 4.5 and 5.x series..
>> 
>> -- 
>> Wbr, Serge via mobile
>> 
>> 30.11.2017, 05:25, "Walter Klomp" <walter at myrepublic.net>:
>>> They were in mine, but yes, if you installed a later 4.5 from scratch they are not there, but then if you copy them from another instance, things just start to magically work...
>>> 
>>> 
>>> 
>>>> On 30 Nov 2017, at 9:53 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>>>> 
>>>> How strange.  I didn't even have the backuptools section in my config.yml file.
>>>> 
>>>> On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>>>> Nope. I actually had to explicitly switch it off because it cleans up too much too early. 
>>>> 
>>>> Yours sincerely,
>>>> Walter
>>>> 
>>>> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>>>> 
>>>>> Hi Walter,
>>>>> 
>>>>> Did you have to do anything for it to work?
>>>>> 
>>>>> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>>>>> I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 
>>>>> 
>>>>> Yours sincerely,
>>>>> Walter
>>>>> 
>>>>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>>>>> 
>>>>>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>>>>>> 
>>>>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>>>>>> Hi,
>>>>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>>>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>>>>> 
>>>>>> Cheers,
>>>>>> 
>>>>>>  -- 
>>>>>> Daniel Grotti
>>>>>> Head of Customer Support
>>>>>> Sipwise GmbH, Campus 21/Europaring F15
>>>>>> AT-2345 Brunn am Gebirge
>>>>>> 
>>>>>> Office: +43(0)130120332
>>>>>> Email: dgrotti at sipwise.com
>>>>>> Website: https://www.sipwise.com
>>>>>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>>>>> 
>>>>>>> Uh... no.  Not according to the handbook:
>>>>>>> 
>>>>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>>>>> 
>>>>>>> 13.1.2 The built-in backup solution
>>>>>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>>>>> 
>>>>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>>>>> 
>>>>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>>>>> Hi Matt, 
>>>>>>> 
>>>>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>>>>> 
>>>>>>> Saludos,
>>>>>>> Robert Cuaresma
>>>>>>> 
>>>>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>>>>> Sending this out again.  Anyone?
>>>>>>>> 
>>>>>>>> ---
>>>>>>>> 
>>>>>>>> Hello All,
>>>>>>>> 
>>>>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>>>>> 
>>>>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>>>>> 
>>>>>>>> Thank you all!
>>>>>>>> 
>>>>>>>> 
>>>>>>>> ---My backuptools config section of config.yml---
>>>>>>>> backuptools:
>>>>>>>>   cdrexport_backup:
>>>>>>>>     enable: 'yes'
>>>>>>>>   etc_backup:
>>>>>>>>     enable: 'yes'
>>>>>>>>   mail:
>>>>>>>>     address: winwithschwinn at gmail.com
>>>>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>>>>     send_errors: 'yes'
>>>>>>>>     send_log: 'yes'
>>>>>>>>   mysql_backup:
>>>>>>>>     enable: 'yes'
>>>>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>>>>   rotate_days: 7
>>>>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>>>>> ------
>>>>>>>> 
>>>>>>>> 
>>>>>>>>  _______________________________________________
>>>>>>>> Spce-user mailing list
>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> ---------- Forwarded message ----------
>>>>>>> From: Alex Lutay <alutay at sipwise.com>
>>>>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>>>>> Cc: 
>>>>>>> Bcc: 
>>>>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>>>>> Hi,
>>>>>>> 
>>>>>>> As Andrew Pogrebennyk wrote in a thread,
>>>>>>> backuptools is for PRO/Carrier only.
>>>>>>> 
>>>>>>> This is why CE validation doesn't like it.
>>>>>>> 
>>>>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>>>>> >
>>>>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>>>>> 
>>>>>>> --
>>>>>>> Alex Lutay
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> -- 
>>>>>>> Enjoy the day!
>>>>>>> Matt Schwinn
>>>>>>> TCG Technologies LLC 
>>>>>>>       and
>>>>>>> Company B
>>>>>>> 209-202-3329
>>>>>>> www.TCGTechLLC.com
>>>>>>> 
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> -- 
>>>>>> Enjoy the day!
>>>>>> Matt Schwinn
>>>>>> TCG Technologies LLC 
>>>>>>       and
>>>>>> Company B
>>>>>> 209-202-3329
>>>>>> www.TCGTechLLC.com
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>> 
>> 
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/a9946294/attachment.html>

From rabs at dimension-virtual.com  Thu Nov 30 04:57:35 2017
From: rabs at dimension-virtual.com (=?utf-8?B?UmHDumw=?= Alexis Betancor Santana)
Date: Thu, 30 Nov 2017 10:57:35 +0100 (CET)
Subject: [Spce-user] Move scubscriber to another customer
In-Reply-To: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
References: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
Message-ID: <900665871.324104.1512035855978.JavaMail.zimbra@dimension-virtual.com>

You could do it manually on the DB, but not throught the API or the NGCP Panel

----- Mensaje original -----
> De: "Oleg" <spce at irg-x.net>
> Para: spce-user at lists.sipwise.com
> Enviados: Martes, 21 de Noviembre 2017 17:47:03
> Asunto: [Spce-user] Move scubscriber to another customer

> Hello everyone,
> 
> I was wandering if there is a way to move a subscriber from one Customer
> to another (within Sipwise). I was about to 'terminate' it under one
> customer to 'create' it under another. Is there a better way?
> 
> Thanks.
> 
> Oleg
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
(null)


From dgrotti at sipwise.com  Thu Nov 30 05:29:35 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:29:35 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <20171130105927.0e92108b@multivac>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
 <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
 <20171130105927.0e92108b@multivac>
Message-ID: <d6d1f7e1-6c98-aa22-8dd5-038a4b82c052@sipwise.com>

Hi Jon,
that's the reason.
In future we will let you able to understand what section is Commercial 
only and what not.

Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 10:59 AM, Jon Bonilla (Manwe) wrote:
> El Thu, 30 Nov 2017 10:43:43 +0100
> Daniel Grotti <dgrotti at sipwise.com> escribi?:
>
>> Starting from mr5.0 you will see backuptool section in your config.yml,
>> this is on purpose and correct, since we are aligning configuration
>> between PRO an CE. But if you change something there, nothing will
>> happen, since there is no package installed.
> What's the point of having yml sections in CE that won't work? I understand
> that it's easier for developers but unless you create a pro.yml of something
> you'll only confuse CE users who will configure disabled sections without
> notice.
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/4718cd90/attachment.html>

From stefanormc at gmail.com  Thu Nov 30 05:29:56 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 02:29:56 -0800
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
Message-ID: <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>

Hi

it?s not working as I expected. Peer is registered to subscriber but I get
No PSTN Available response:

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:3355416588 at d.voceblu.it;user=phone F=
sip:0118118673 at d.voceblu.it T=sip:3355416588 at d.voceblu.it;user=phone IP=
172.31.255.180:2051 (127.0.0.1:5060) ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: IMS marker,
s:ims_role='<null>', s:caller_uuid='f091ad4c-c8a2-42e4-8fae-bcba92b63fb2',
s:callee_uuid='<null>', s:acc_caller_user='0118118673',
s:acc_caller_domain='d.voceblu.it'  - R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Dialog managed,
lua_dlg_callid:[3c4632c304e2-1vukdq0ac0ql at snom190] - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: User-Provided CLI
'0118118673' taken from From-User - R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: User-provided CLI
'0118118673' rejected, using network-provided CLI '390118118673' - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Setting '
390118118673 at d.voceblu.it' as initiating user-provided CLI - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Setting '
390118118673 at d.voceblu.it' as initiating network-provided CLI - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Callee is not local
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Call to SIP Peering
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Load gws matching
calling part 'sip:390118118673 at d.voceblu.it' and called user '3355416588'
and called part 'sip:3355416588 at d.voceblu.it;user=phone' - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: ERROR: <script>: No PSTN gateways
available - R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Setting acc
source-leg for uuid 'f091ad4c-c8a2-42e4-8fae-bcba92b63fb2':
'f091ad4c-c8a2-42e4-8fae-bcba92b63fb2|0118118673|d.voceblu.it|390118118673||Associazione
Vivere|170|||0|call|172.31.255.180|1512036935.048282||||||||||||390118118673|'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

If I check with the ?call routing tool? I get this:

found caller subscriber '0118118673 at d.voceblu.it' with id 178
call from 0118118673 using subscriber '0118118673 at d.voceblu.it' id 178
no caller subscriber/domain rewrite rule sets were found
caller 0118118673 is rejected as it does not match subscriber's
'allowed_clis'
'allowed_cli' reject policy is 'override_by_usernpn', taken from 'cli'
390118118673
callee subscriber lookup based on 3355416588
no callee subscriber found, performing peer lookup with caller uri
390118118673 at d.voceblu.it and callee uri 3355416588 and callee 3355416588
no callee peers found

The CLI is in the allowed_cli list of the subscriber

what am I doing wrong?

thanks

stefano

Il giorno 30 novembre 2017 @ 09:22:50, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
you can just route calls to the other peer via subscribers aliases, indeed.


--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/29/2017 09:58 PM, stefanormc wrote:

Hi all, thanks for the support.

Trial is working, tomorrow I?ll check in production. I don?t think you have
to setup 2 peers but I think you have to set all aliases subscriber side to
route calls correctly.

I?m using mr5.4.1
<https://centrale03.avanzati.it:1443/statistics/versions>
Please note that on this version peer_auth only works manually as described
on documentation

Thanks

Ciao

Stefano

On 29 November 2017 at 21:49:53, Jon Bonilla (Manwe) (manwe at sipdoc.net)
wrote:

El Wed, 29 Nov 2017 20:09:06 +0000
Barry Flanagan <barry at flanagan.ie> escribi?:


> >
> >
> I think you would also need to do the reverse as well, so both SPCE have a
> peer to the other for outbound, and a subscriber for the inbound. Peers
and
> Subscribers would need to use authentication as mentioned above, so that
> they don't get mixed up.
>
> Alternatively, I think you can set allow_peer_relay to "yes" in
> /etc/ngcp-config/config.yml which would allow a call to come in from one
> peer and get sent out to another peer (based on routing rules), although
> this only would work if you did not need to bill, as peer-to-peer does not
> get billed.
>
>

If you set another system as peer and subscriber when an incoming call
comes it
will be detected as peer and won't be authenticated. No need for
authenticate
the peer, right?

Maybe it could work, yes. You would send via subscriber with permanent
contact
and it would be detected as incoming form peer in the other side. No need
for
enable_peer_relay in that case.
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/31957824/attachment.html>

From dgrotti at sipwise.com  Thu Nov 30 05:31:59 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:31:59 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
Message-ID: <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>

Hi,
problem is that you do not have a peering rule matching the called (anc 
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least 
created the "catch-all" rule?

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it 
> <mailto:sip%3A390118118673 at d.voceblu.it>' and called user '3355416588' 
> and called part 'sip:3355416588 at d.voceblu.it 
> <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' - 
> R=sip:3355416588 at d.voceblu.it 
> <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone 
> ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/bf643947/attachment.html>

From ipeshinskaya at sipwise.com  Thu Nov 30 05:35:32 2017
From: ipeshinskaya at sipwise.com (Irina Peshinskaya)
Date: Thu, 30 Nov 2017 12:35:32 +0200
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
Message-ID: <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>

Dear David,

We have released a hotfix for this issue.
Kindly find the fix in the ngcp-panel mr5.5.1.5

Best regards,
Irina Peshinskaya

On 29.11.2017 23:19, David | csr-online SPAIN wrote:
> I try with all reseller,s customers and the error always the same in version 5.5.1
>
> In panel.log the error was:
>
> Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
>
>
> Thank you very much
>
>
>
> Cordialment | Atentamente | Sincerely
> David Pablo Mitchell
> CTO
>
> CSR ONLINE
> Movil: +34 658174990
> Tel.Oficina:+34 931860160 / +34 902056355 ext.101
> Mail: davidp at csr-online.net
> Web: www.csr-online.net
> You run your business, we run your IT.
>
>
> La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user




From davidp at csr-online.net  Thu Nov 30 05:41:21 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 10:41:21 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
Message-ID: <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>

Sorry for this question what steps i do to install/upgrade to the fix?

Thank you


El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

    Dear David,

    We have released a hotfix for this issue.
    Kindly find the fix in the ngcp-panel mr5.5.1.5

    Best regards,
    Irina Peshinskaya

    On 29.11.2017 23:19, David | csr-online SPAIN wrote:
    > I try with all reseller,s customers and the error always the same in version 5.5.1
    >
    > In panel.log the error was:
    >
    > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
    >
    >
    > Thank you very much
    >
    >
    >
    > Cordialment | Atentamente | Sincerely
    > David Pablo Mitchell
    > CTO
    >
    > CSR ONLINE
    > Movil: +34 658174990
    > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
    > Mail: davidp at csr-online.net
    > Web: www.csr-online.net
    > You run your business, we run your IT.
    >
    >
    > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    > _______________________________________________
    > Spce-user mailing list
    > Spce-user at lists.sipwise.com
    > https://lists.sipwise.com/listinfo/spce-user





Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From ipeshinskaya at sipwise.com  Thu Nov 30 05:44:44 2017
From: ipeshinskaya at sipwise.com (Irina Peshinskaya)
Date: Thu, 30 Nov 2017 12:44:44 +0200
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
Message-ID: <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>

Dear David,

you need to upgrade ngcp-panel with command:

         apt-get install ngcp-panel

and after that restart ngcp-panel service:

         service ngcp-panel restart

Best regards,
Irina Peshinskaya

On 30.11.2017 12:41, David | csr-online SPAIN wrote:
> Sorry for this question what steps i do to install/upgrade to the fix?
>
> Thank you
>
>
> El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
>
>      Dear David,
>
>      We have released a hotfix for this issue.
>      Kindly find the fix in the ngcp-panel mr5.5.1.5
>
>      Best regards,
>      Irina Peshinskaya
>
>      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
>      > I try with all reseller,s customers and the error always the same in version 5.5.1
>      >
>      > In panel.log the error was:
>      >
>      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
>      >
>      >
>      > Thank you very much
>      >
>      >
>      >
>      > Cordialment | Atentamente | Sincerely
>      > David Pablo Mitchell
>      > CTO
>      >
>      > CSR ONLINE
>      > Movil: +34 658174990
>      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
>      > Mail: davidp at csr-online.net
>      > Web: www.csr-online.net
>      > You run your business, we run your IT.
>      >
>      >
>      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
>      > _______________________________________________
>      > Spce-user mailing list
>      > Spce-user at lists.sipwise.com
>      > https://lists.sipwise.com/listinfo/spce-user
>
>
>
>
>
> Cordialment | Atentamente | Sincerely
> David Pablo Mitchell
> CTO
>
> CSR ONLINE
> Movil: +34 658174990
> Tel.Oficina:+34 931860160 / +34 902056355  ext.101
> Mail: davidp at csr-online.net
> Web: www.csr-online.net
> You run your business, we run your IT.
>
>
> La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.




From davidp at csr-online.net  Thu Nov 30 05:45:22 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 10:45:22 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
Message-ID: <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>

Thanks a lot i try

El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

    Dear David,

    you need to upgrade ngcp-panel with command:

             apt-get install ngcp-panel

    and after that restart ngcp-panel service:

             service ngcp-panel restart

    Best regards,
    Irina Peshinskaya

    On 30.11.2017 12:41, David | csr-online SPAIN wrote:
    > Sorry for this question what steps i do to install/upgrade to the fix?
    >
    > Thank you
    >
    >
    > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
    >
    >      Dear David,
    >
    >      We have released a hotfix for this issue.
    >      Kindly find the fix in the ngcp-panel mr5.5.1.5
    >
    >      Best regards,
    >      Irina Peshinskaya
    >
    >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
    >      > I try with all reseller,s customers and the error always the same in version 5.5.1
    >      >
    >      > In panel.log the error was:
    >      >
    >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
    >      >
    >      >
    >      > Thank you very much
    >      >
    >      >
    >      >
    >      > Cordialment | Atentamente | Sincerely
    >      > David Pablo Mitchell
    >      > CTO
    >      >
    >      > CSR ONLINE
    >      > Movil: +34 658174990
    >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
    >      > Mail: davidp at csr-online.net
    >      > Web: www.csr-online.net
    >      > You run your business, we run your IT.
    >      >
    >      >
    >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    >      > _______________________________________________
    >      > Spce-user mailing list
    >      > Spce-user at lists.sipwise.com
    >      > https://lists.sipwise.com/listinfo/spce-user
    >
    >
    >
    >
    >
    > Cordialment | Atentamente | Sincerely
    > David Pablo Mitchell
    > CTO
    >
    > CSR ONLINE
    > Movil: +34 658174990
    > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    > Mail: davidp at csr-online.net
    > Web: www.csr-online.net
    > You run your business, we run your IT.
    >
    >
    > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From dgrotti at sipwise.com  Thu Nov 30 05:53:17 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:53:17 +0100
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
Message-ID: <54be7139-33a4-35e0-e11e-4a8ccf28b628@sipwise.com>

David,
you need to do:

apt-get update
apt-get install ngcp-panel
ngcpcfg apply 'commit mesasge'

or better update to latest hotfixes:

apt-get update && apt-get upgrade && \
ngcp-update-db-schema && ngcp-update-cfg-schema && \
ngcpcfg apply 'commit message'

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:45 AM, David | csr-online SPAIN wrote:
> Thanks a lot i try
>
> El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
>
>      Dear David,
>
>      you need to upgrade ngcp-panel with command:
>
>               apt-get install ngcp-panel
>
>      and after that restart ngcp-panel service:
>
>               service ngcp-panel restart
>
>      Best regards,
>      Irina Peshinskaya
>
>      On 30.11.2017 12:41, David | csr-online SPAIN wrote:
>      > Sorry for this question what steps i do to install/upgrade to the fix?
>      >
>      > Thank you
>      >
>      >
>      > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
>      >
>      >      Dear David,
>      >
>      >      We have released a hotfix for this issue.
>      >      Kindly find the fix in the ngcp-panel mr5.5.1.5
>      >
>      >      Best regards,
>      >      Irina Peshinskaya
>      >
>      >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
>      >      > I try with all reseller,s customers and the error always the same in version 5.5.1
>      >      >
>      >      > In panel.log the error was:
>      >      >
>      >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
>      >      >
>      >      >
>      >      > Thank you very much
>      >      >
>      >      >
>      >      >
>      >      > Cordialment | Atentamente | Sincerely
>      >      > David Pablo Mitchell
>      >      > CTO
>      >      >
>      >      > CSR ONLINE
>      >      > Movil: +34 658174990
>      >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
>      >      > Mail: davidp at csr-online.net
>      >      > Web: www.csr-online.net
>      >      > You run your business, we run your IT.
>      >      >
>      >      >
>      >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
>      >      > _______________________________________________
>      >      > Spce-user mailing list
>      >      > Spce-user at lists.sipwise.com
>      >      > https://lists.sipwise.com/listinfo/spce-user
>      >
>      >
>      >
>      >
>      >
>      > Cordialment | Atentamente | Sincerely
>      > David Pablo Mitchell
>      > CTO
>      >
>      > CSR ONLINE
>      > Movil: +34 658174990
>      > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
>      > Mail: davidp at csr-online.net
>      > Web: www.csr-online.net
>      > You run your business, we run your IT.
>      >
>      >
>      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
>
>
>
>
>
> Cordialment | Atentamente | Sincerely
> David Pablo Mitchell
> CTO
>
> CSR ONLINE
> Movil: +34 658174990
> Tel.Oficina:+34 931860160 / +34 902056355  ext.101
> Mail: davidp at csr-online.net
> Web: www.csr-online.net
> You run your business, we run your IT.
>
>
> La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user




From stefanormc at gmail.com  Thu Nov 30 05:54:08 2017
From: stefanormc at gmail.com (stefanormc at gmail.com)
Date: Thu, 30 Nov 2017 11:54:08 +0100
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
Message-ID: <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>

An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/10958bcd/attachment.html>

From dgrotti at sipwise.com  Thu Nov 30 05:59:23 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:59:23 +0100
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
Message-ID: <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
>     Hi,
>     problem is that you do not have a peering rule matching the called
>     (anc callind) part, see below.
>     Please check your peering rules in your peerin server. Have you at
>     least created the "catch-all" rule?
>
>     -- 
>     Daniel Grotti
>     Head of Customer Support
>     Sipwise GmbH, Campus 21/Europaring F15
>     AT-2345 Brunn am Gebirge
>
>     Office: +43(0)130120332
>     Email:dgrotti at sipwise.com
>     Website:https://www.sipwise.com
>
>     On 11/30/2017 11:29 AM, stefanormc wrote:
>>     Load gws matching calling part 'sip:390118118673 at d.voceblu.it
>>     <mailto:sip%3A390118118673 at d.voceblu.it>' and called user
>>     '3355416588' and called part 'sip:3355416588 at d.voceblu.it
>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' -
>>     R=sip:3355416588 at d.voceblu.it
>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone
>>     ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/9d861ae3/attachment.html>

From stefanormc at gmail.com  Thu Nov 30 06:32:34 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 03:32:34 -0800
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
Message-ID: <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>

There is no rule in ngcp-sercmd proxy lcr.dump_rules

Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 9

prefix:

from_uri: @digi.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 3

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 7

prefix:

from_uri: @voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

{

lcr_id: 1

rule_id: 6

prefix:

from_uri: old at d.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 4

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 4

prefix:

from_uri: @geva.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

0

centrale:~#


But there is in web interface:

#PrefixCaller PatternStateDescriptionPeer GroupPeer NamePeer HostPeer IPPeer
StatePriorityWeight
4 @geva.voceblu.it 1 TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
<https://centrale.avanzati.it:1443/peering/2/rules/4/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/servers/7/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/rules/4/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
6 ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
94.125.235.56 1 1 1
<https://centrale.avanzati.it:1443/peering/6/rules/6/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/servers/13/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/rules/6/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
7 @voceblu.it 1 TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
<https://centrale.avanzati.it:1443/peering/2/rules/7/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/servers/7/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/rules/7/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
8 @v.voceblu.it 1 centrale03 centrale03 94.125.235.56 1 1 1
<https://centrale.avanzati.it:1443/peering/6/rules/8/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/servers/13/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/rules/8/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
9 @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel
diretto Digitel
diretto voip.digitelitalia.it 109.238.17.166 1 1 1


On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com) wrote:

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:

There is a rule catching all d.voceblu.it


-------- Messaggio originale --------
Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
Da: Daniel Grotti
A: stefanormc ,spce-user at lists.sipwise.com
CC:


Hi,
problem is that you do not have a peering rule matching the called (anc
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least
created the "catch-all" rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:

Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/71213aa8/attachment.html>

From dgrotti at sipwise.com  Thu Nov 30 06:37:19 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 12:37:19 +0100
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
Message-ID: <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>

Try to run:

ngcp-sercmd proxy lcr.reload

and then again:

ngcp-sercmd proxy lcr.dump_rules

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 12:32 PM, stefanormc wrote:
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 
> 93-57-17-112.ip162.fastwebnet.it <http://93-57-17-112.ip162.fastwebnet.it>
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it <http://digi.voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it <http://voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it <mailto:old at d.voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it <http://geva.voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
>
> But there is in web interface:
>
> # 	Prefix 	Caller Pattern 	State 	Description 	Peer Group 	Peer Name 
> Peer Host 	Peer IP 	Peer State 	Priority 	Weight 	
> 4 	
> 	@geva.voceblu.it <http://geva.voceblu.it> 	1 	
> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
> 1 	2 	1 	
> 6 	
> 	^d\.voceblu\.it$ 	1 	seleziona numeri digitel 	centrale03 	centrale03 	
> 	94.125.235.56 	1 	1 	1 	
> 7 	
> 	@voceblu.it <http://voceblu.it> 	1 	
> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
> 1 	2 	1 	
> 8 	
> 	@v.voceblu.it <http://v.voceblu.it> 	1 	
> 	centrale03 	centrale03 	
> 	94.125.235.56 	1 	1 	1 	
> 9 	
> 	@digi.voceblu.it <http://digi.voceblu.it> 	1 	seleziona tutti quelli 
> diretti digitel 	Digitel diretto 	Digitel diretto 
> voip.digitelitalia.it <http://voip.digitelitalia.it> 	109.238.17.166 
> 1 	1 	1 	
>
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com 
> <mailto:dgrotti at sipwise.com>) wrote:
>
>> it seems you do not have it.
>> Please try to re-save the rule, and also do:
>>
>> ngcp-sercmd proxy lcr.dump_gws
>> ngcp-sercmd proxy lcr.dump_rules
>>
>>
>> Do you see your peer there and the rule?
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email:dgrotti at sipwise.com
>> Website:https://www.sipwise.com
>> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>>> There is a rule catching all d.voceblu.it <http://d.voceblu.it>
>>>
>>>
>>> -------- Messaggio originale --------
>>> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
>>> Da: Daniel Grotti
>>> A: stefanormc ,spce-user at lists.sipwise.com
>>> CC:
>>>
>>>
>>>     Hi,
>>>     problem is that you do not have a peering rule matching the
>>>     called (anc callind) part, see below.
>>>     Please check your peering rules in your peerin server. Have you
>>>     at least created the "catch-all" rule?
>>>
>>>     --
>>>     Daniel Grotti
>>>     Head of Customer Support
>>>     Sipwise GmbH, Campus 21/Europaring F15
>>>     AT-2345 Brunn am Gebirge
>>>
>>>     Office: +43(0)130120332
>>>     Email:dgrotti at sipwise.com
>>>     Website:https://www.sipwise.com
>>>
>>>     On 11/30/2017 11:29 AM, stefanormc wrote:
>>>>     Load gws matching calling part 'sip:390118118673 at d.voceblu.it
>>>>     <mailto:sip%3A390118118673 at d.voceblu.it>' and called user
>>>>     '3355416588' and called part 'sip:3355416588 at d.voceblu.it
>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' -
>>>>     R=sip:3355416588 at d.voceblu.it
>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone
>>>>     ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
>>>
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/86a1e910/attachment.html>

From dgrotti at sipwise.com  Thu Nov 30 06:39:16 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 12:39:16 +0100
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
Message-ID: <42068f1a-c029-491d-3eab-ad6e0934aa40@sipwise.com>

Stefano,
Which version do you run?


Daniel



On 11/30/2017 12:37 PM, Daniel Grotti wrote:
> Try to run:
>
> ngcp-sercmd proxy lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email:dgrotti at sipwise.com
> Website:https://www.sipwise.com
> On 11/30/2017 12:32 PM, stefanormc wrote:
>> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>>
>> Last login: Thu Nov 30 12:04:19 2017 from 
>> 93-57-17-112.ip162.fastwebnet.it 
>> <http://93-57-17-112.ip162.fastwebnet.it>
>>
>> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 9
>>
>> prefix:
>>
>> from_uri: @digi.voceblu.it <http://digi.voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 3
>>
>> priority: 1
>>
>> weight: 1
>>
>> }
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 7
>>
>> prefix:
>>
>> from_uri: @voceblu.it <http://voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 1
>>
>> priority: 2
>>
>> weight: 1
>>
>> }
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 6
>>
>> prefix:
>>
>> from_uri: old at d.voceblu.it <mailto:old at d.voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 4
>>
>> priority: 1
>>
>> weight: 1
>>
>> }
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 4
>>
>> prefix:
>>
>> from_uri: @geva.voceblu.it <http://geva.voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 1
>>
>> priority: 2
>>
>> weight: 1
>>
>> }
>>
>> 0
>>
>> centrale:~#
>>
>>
>>
>> But there is in web interface:
>>
>> # 	Prefix 	Caller Pattern 	State 	Description 	Peer Group 	Peer Name 
>> Peer Host 	Peer IP 	Peer State 	Priority 	Weight 	
>> 4 	
>> 	@geva.voceblu.it <http://geva.voceblu.it> 	1 	
>> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
>> 	1 	2 	1 	
>> 6 	
>> 	^d\.voceblu\.it$ 	1 	seleziona numeri digitel 	centrale03 	centrale03 	
>> 	94.125.235.56 	1 	1 	1 	
>> 7 	
>> 	@voceblu.it <http://voceblu.it> 	1 	
>> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
>> 	1 	2 	1 	
>> 8 	
>> 	@v.voceblu.it <http://v.voceblu.it> 	1 	
>> 	centrale03 	centrale03 	
>> 	94.125.235.56 	1 	1 	1 	
>> 9 	
>> 	@digi.voceblu.it <http://digi.voceblu.it> 	1 	seleziona tutti quelli 
>> diretti digitel 	Digitel diretto 	Digitel diretto 
>> voip.digitelitalia.it <http://voip.digitelitalia.it> 	109.238.17.166 
>> 1 	1 	1 	
>>
>>
>>
>> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com 
>> <mailto:dgrotti at sipwise.com>) wrote:
>>
>>> it seems you do not have it.
>>> Please try to re-save the rule, and also do:
>>>
>>> ngcp-sercmd proxy lcr.dump_gws
>>> ngcp-sercmd proxy lcr.dump_rules
>>>
>>>
>>> Do you see your peer there and the rule?
>>> --
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email:dgrotti at sipwise.com
>>> Website:https://www.sipwise.com
>>> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>>>> There is a rule catching all d.voceblu.it <http://d.voceblu.it>
>>>>
>>>>
>>>> -------- Messaggio originale --------
>>>> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
>>>> Da: Daniel Grotti
>>>> A: stefanormc ,spce-user at lists.sipwise.com
>>>> CC:
>>>>
>>>>
>>>>     Hi,
>>>>     problem is that you do not have a peering rule matching the
>>>>     called (anc callind) part, see below.
>>>>     Please check your peering rules in your peerin server. Have you
>>>>     at least created the "catch-all" rule?
>>>>
>>>>     --
>>>>     Daniel Grotti
>>>>     Head of Customer Support
>>>>     Sipwise GmbH, Campus 21/Europaring F15
>>>>     AT-2345 Brunn am Gebirge
>>>>
>>>>     Office: +43(0)130120332
>>>>     Email:dgrotti at sipwise.com
>>>>     Website:https://www.sipwise.com
>>>>
>>>>     On 11/30/2017 11:29 AM, stefanormc wrote:
>>>>>     Load gws matching calling part 'sip:390118118673 at d.voceblu.it
>>>>>     <mailto:sip%3A390118118673 at d.voceblu.it>' and called user
>>>>>     '3355416588' and called part 'sip:3355416588 at d.voceblu.it
>>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' -
>>>>>     R=sip:3355416588 at d.voceblu.it
>>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone
>>>>>     ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
>>>>
>>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/856db567/attachment.html>

From stefanormc at gmail.com  Thu Nov 30 06:42:46 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 03:42:46 -0800
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
Message-ID: <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>

It doesn?t seem to effect the rules

I?m on 5.4.1


On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com) wrote:

Try to run:

ngcp-sercmd proxy  lcr.reload

and then again:

ngcp-sercmd proxy lcr.dump_rules

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 12:32 PM, stefanormc wrote:

There is no rule in ngcp-sercmd proxy lcr.dump_rules

Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 9

prefix:

from_uri: @digi.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 3

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 7

prefix:

from_uri: @voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

{

lcr_id: 1

rule_id: 6

prefix:

from_uri: old at d.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 4

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 4

prefix:

from_uri: @geva.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

0

centrale:~#


But there is in web interface:

# Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
IP Peer State Priority Weight
4
@geva.voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
6
^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
94.125.235.56 1 1 1
7
@voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
8
@v.voceblu.it 1
centrale03 centrale03
94.125.235.56 1 1 1
9
@digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel
diretto Digitel
diretto voip.digitelitalia.it 109.238.17.166 1 1 1


On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com) wrote:

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:

There is a rule catching all d.voceblu.it


-------- Messaggio originale --------
Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
Da: Daniel Grotti
A: stefanormc ,spce-user at lists.sipwise.com
CC:


Hi,
problem is that you do not have a peering rule matching the called (anc
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least
created the "catch-all" rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:

Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/41ad61f9/attachment.html>

From stefanormc at gmail.com  Thu Nov 30 06:48:54 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 03:48:54 -0800
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
Message-ID: <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>

Instead of deleting and recreating the rule I moved it to the other peer.
Could that be the problem?


On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:

It doesn?t seem to effect the rules

I?m on 5.4.1


On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com) wrote:

Try to run:

ngcp-sercmd proxy  lcr.reload

and then again:

ngcp-sercmd proxy lcr.dump_rules

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 12:32 PM, stefanormc wrote:

There is no rule in ngcp-sercmd proxy lcr.dump_rules

Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 9

prefix:

from_uri: @digi.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 3

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 7

prefix:

from_uri: @voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

{

lcr_id: 1

rule_id: 6

prefix:

from_uri: old at d.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 4

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 4

prefix:

from_uri: @geva.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

0

centrale:~#


But there is in web interface:

# Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
IP Peer State Priority Weight
4
@geva.voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
6
^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
94.125.235.56 1 1 1
7
@voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
8
@v.voceblu.it 1
centrale03 centrale03
94.125.235.56 1 1 1
9
@digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel
diretto Digitel
diretto voip.digitelitalia.it 109.238.17.166 1 1 1


On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com) wrote:

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:

There is a rule catching all d.voceblu.it


-------- Messaggio originale --------
Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
Da: Daniel Grotti
A: stefanormc ,spce-user at lists.sipwise.com
CC:


Hi,
problem is that you do not have a peering rule matching the called (anc
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least
created the "catch-all" rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:

Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/121820f3/attachment.html>

From barry at flanagan.ie  Thu Nov 30 07:11:22 2017
From: barry at flanagan.ie (Barry Flanagan)
Date: Thu, 30 Nov 2017 12:11:22 +0000
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
Message-ID: <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>

On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/5b5c5d54/attachment.html>

From stefanormc at gmail.com  Thu Nov 30 09:06:41 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 06:06:41 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
Message-ID: <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/f3fc2962/attachment.html>

From davidp at csr-online.net  Thu Nov 30 10:05:29 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 15:05:29 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <54be7139-33a4-35e0-e11e-4a8ccf28b628@sipwise.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
 <54be7139-33a4-35e0-e11e-4a8ccf28b628@sipwise.com>
Message-ID: <62A46FA3-AF50-4648-93FE-D677AAD491CE@csr-online.net>

Works thank you


El 30/11/17 11:53, "Spce-user en nombre de Daniel Grotti" <spce-user-bounces at lists.sipwise.com en nombre de dgrotti at sipwise.com> escribi?:

    David,
    you need to do:

    apt-get update
    apt-get install ngcp-panel
    ngcpcfg apply 'commit mesasge'

    or better update to latest hotfixes:

    apt-get update && apt-get upgrade && \
    ngcp-update-db-schema && ngcp-update-cfg-schema && \
    ngcpcfg apply 'commit message'

    --
    Daniel Grotti
    Head of Customer Support
    Sipwise GmbH, Campus 21/Europaring F15
    AT-2345 Brunn am Gebirge

    Office: +43(0)130120332
    Email: dgrotti at sipwise.com
    Website: https://www.sipwise.com

    On 11/30/2017 11:45 AM, David | csr-online SPAIN wrote:
    > Thanks a lot i try
    >
    > El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
    >
    >      Dear David,
    >
    >      you need to upgrade ngcp-panel with command:
    >
    >               apt-get install ngcp-panel
    >
    >      and after that restart ngcp-panel service:
    >
    >               service ngcp-panel restart
    >
    >      Best regards,
    >      Irina Peshinskaya
    >
    >      On 30.11.2017 12:41, David | csr-online SPAIN wrote:
    >      > Sorry for this question what steps i do to install/upgrade to the fix?
    >      >
    >      > Thank you
    >      >
    >      >
    >      > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
    >      >
    >      >      Dear David,
    >      >
    >      >      We have released a hotfix for this issue.
    >      >      Kindly find the fix in the ngcp-panel mr5.5.1.5
    >      >
    >      >      Best regards,
    >      >      Irina Peshinskaya
    >      >
    >      >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
    >      >      > I try with all reseller,s customers and the error always the same in version 5.5.1
    >      >      >
    >      >      > In panel.log the error was:
    >      >      >
    >      >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
    >      >      >
    >      >      >
    >      >      > Thank you very much
    >      >      >
    >      >      >
    >      >      >
    >      >      > Cordialment | Atentamente | Sincerely
    >      >      > David Pablo Mitchell
    >      >      > CTO
    >      >      >
    >      >      > CSR ONLINE
    >      >      > Movil: +34 658174990
    >      >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
    >      >      > Mail: davidp at csr-online.net
    >      >      > Web: www.csr-online.net
    >      >      > You run your business, we run your IT.
    >      >      >
    >      >      >
    >      >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    >      >      > _______________________________________________
    >      >      > Spce-user mailing list
    >      >      > Spce-user at lists.sipwise.com
    >      >      > https://lists.sipwise.com/listinfo/spce-user
    >      >
    >      >
    >      >
    >      >
    >      >
    >      > Cordialment | Atentamente | Sincerely
    >      > David Pablo Mitchell
    >      > CTO
    >      >
    >      > CSR ONLINE
    >      > Movil: +34 658174990
    >      > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    >      > Mail: davidp at csr-online.net
    >      > Web: www.csr-online.net
    >      > You run your business, we run your IT.
    >      >
    >      >
    >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    >
    >
    >
    >
    >
    > Cordialment | Atentamente | Sincerely
    > David Pablo Mitchell
    > CTO
    >
    > CSR ONLINE
    > Movil: +34 658174990
    > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    > Mail: davidp at csr-online.net
    > Web: www.csr-online.net
    > You run your business, we run your IT.
    >
    >
    > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    > _______________________________________________
    > Spce-user mailing list
    > Spce-user at lists.sipwise.com
    > https://lists.sipwise.com/listinfo/spce-user


    _______________________________________________
    Spce-user mailing list
    Spce-user at lists.sipwise.com
    https://lists.sipwise.com/listinfo/spce-user



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From davidp at csr-online.net  Thu Nov 30 10:05:57 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 15:05:57 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
Message-ID: <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>

Working invoices thansk a lot


El 30/11/17 11:45, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

    Thanks a lot i try

    El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

        Dear David,

        you need to upgrade ngcp-panel with command:

                 apt-get install ngcp-panel

        and after that restart ngcp-panel service:

                 service ngcp-panel restart

        Best regards,
        Irina Peshinskaya

        On 30.11.2017 12:41, David | csr-online SPAIN wrote:
        > Sorry for this question what steps i do to install/upgrade to the fix?
        >
        > Thank you
        >
        >
        > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
        >
        >      Dear David,
        >
        >      We have released a hotfix for this issue.
        >      Kindly find the fix in the ngcp-panel mr5.5.1.5
        >
        >      Best regards,
        >      Irina Peshinskaya
        >
        >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
        >      > I try with all reseller,s customers and the error always the same in version 5.5.1
        >      >
        >      > In panel.log the error was:
        >      >
        >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
        >      >
        >      >
        >      > Thank you very much
        >      >
        >      >
        >      >
        >      > Cordialment | Atentamente | Sincerely
        >      > David Pablo Mitchell
        >      > CTO
        >      >
        >      > CSR ONLINE
        >      > Movil: +34 658174990
        >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
        >      > Mail: davidp at csr-online.net
        >      > Web: www.csr-online.net
        >      > You run your business, we run your IT.
        >      >
        >      >
        >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
        >      > _______________________________________________
        >      > Spce-user mailing list
        >      > Spce-user at lists.sipwise.com
        >      > https://lists.sipwise.com/listinfo/spce-user
        >
        >
        >
        >
        >
        > Cordialment | Atentamente | Sincerely
        > David Pablo Mitchell
        > CTO
        >
        > CSR ONLINE
        > Movil: +34 658174990
        > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
        > Mail: davidp at csr-online.net
        > Web: www.csr-online.net
        > You run your business, we run your IT.
        >
        >
        > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





    Cordialment | Atentamente | Sincerely
    David Pablo Mitchell
    CTO

    CSR ONLINE
    Movil: +34 658174990
    Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    Mail: davidp at csr-online.net
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    _______________________________________________
    Spce-user mailing list
    Spce-user at lists.sipwise.com
    https://lists.sipwise.com/listinfo/spce-user

    Cordialment | Atentamente | Sincerely




    Movil:
    Tel.Oficina:
    Mail:
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From stefanormc at gmail.com  Thu Nov 30 10:49:47 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 07:49:47 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
 <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
Message-ID: <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>

Still not working!

I did manage to send calls from peer ?> subscriber but I get a 407 error

I can?t seem to get the peer registered against the subscriber as I did
yesterday

I first configured the web interface and then manually updated
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2;
then I re-applied ngcpcfg but no registration

How do I match credentials in reg_agent to the right peer?




Il giorno 30 novembre 2017 @ 15:06:41, stefanormc (stefanormc at gmail.com) ha
scritto:

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/60221b82/attachment.html>

From davidp at csr-online.net  Thu Nov 30 10:58:11 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 15:58:11 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
 <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>
Message-ID: <DFE76E3D-3E7D-43CF-B592-400C4BA55E21@csr-online.net>

I have a billing profile but i dont have opci?n in the panel to delete
By i mistake i assign 2 billing profiles to same reseller

How i can remove profile bill?? please


El 30/11/17 16:05, "David | csr-online SPAIN" <davidp at csr-online.net> escribi?:

    Working invoices thansk a lot


    El 30/11/17 11:45, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

        Thanks a lot i try

        El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

            Dear David,

            you need to upgrade ngcp-panel with command:

                     apt-get install ngcp-panel

            and after that restart ngcp-panel service:

                     service ngcp-panel restart

            Best regards,
            Irina Peshinskaya

            On 30.11.2017 12:41, David | csr-online SPAIN wrote:
            > Sorry for this question what steps i do to install/upgrade to the fix?
            >
            > Thank you
            >
            >
            > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
            >
            >      Dear David,
            >
            >      We have released a hotfix for this issue.
            >      Kindly find the fix in the ngcp-panel mr5.5.1.5
            >
            >      Best regards,
            >      Irina Peshinskaya
            >
            >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
            >      > I try with all reseller,s customers and the error always the same in version 5.5.1
            >      >
            >      > In panel.log the error was:
            >      >
            >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
            >      >
            >      >
            >      > Thank you very much
            >      >
            >      >
            >      >
            >      > Cordialment | Atentamente | Sincerely
            >      > David Pablo Mitchell
            >      > CTO
            >      >
            >      > CSR ONLINE
            >      > Movil: +34 658174990
            >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
            >      > Mail: davidp at csr-online.net
            >      > Web: www.csr-online.net
            >      > You run your business, we run your IT.
            >      >
            >      >
            >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
            >      > _______________________________________________
            >      > Spce-user mailing list
            >      > Spce-user at lists.sipwise.com
            >      > https://lists.sipwise.com/listinfo/spce-user
            >
            >
            >
            >
            >
            > Cordialment | Atentamente | Sincerely
            > David Pablo Mitchell
            > CTO
            >
            > CSR ONLINE
            > Movil: +34 658174990
            > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
            > Mail: davidp at csr-online.net
            > Web: www.csr-online.net
            > You run your business, we run your IT.
            >
            >
            > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





        Cordialment | Atentamente | Sincerely
        David Pablo Mitchell
        CTO

        CSR ONLINE
        Movil: +34 658174990
        Tel.Oficina:+34 931860160 / +34 902056355  ext.101
        Mail: davidp at csr-online.net
        Web: www.csr-online.net
        You run your business, we run your IT.


        La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
        _______________________________________________
        Spce-user mailing list
        Spce-user at lists.sipwise.com
        https://lists.sipwise.com/listinfo/spce-user

        Cordialment | Atentamente | Sincerely




        Movil:
        Tel.Oficina:
        Mail:
        Web: www.csr-online.net
        You run your business, we run your IT.


        La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From henk at voipdigit.nl  Thu Nov 30 11:05:13 2017
From: henk at voipdigit.nl (Henk)
Date: Thu, 30 Nov 2017 17:05:13 +0100
Subject: [Spce-user] Duplicate key error while inserting peering rule
Message-ID: <6bf6cc51-eee9-ef06-ed55-0a68d11ca4f2@voipdigit.nl>

Hi all,

I get this message when I want to create an extra peering rule:

MSG="Failed to create peering rule Duplicate entry '19-3' for key 
'rule_id_gw_id_idx' [for Statement "INSERT INTO 
`provisioning`.`voip_peer_rules` ....

I traced it back to one of the triggers that updates the kamailio table, 
so it seems the kamailio and provision tables are out of sync. Is there 
a way to fix this other then removing all gateways and start over?

Regards,

Henk Plessius

VoipDigit




From davidp at csr-online.net  Thu Nov 30 11:13:06 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 16:13:06 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <DFE76E3D-3E7D-43CF-B592-400C4BA55E21@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
 <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>
 <DFE76E3D-3E7D-43CF-B592-400C4BA55E21@csr-online.net>
Message-ID: <3F54F04F-7076-4433-8581-1DC429A9EF88@csr-online.net>

Sorry to every body i cant applu billing fees to my calls and i am in the last versi?n and fixes
All calls appear 0.0 cost

Any help please?


El 30/11/17 16:58, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

    I have a billing profile but i dont have opci?n in the panel to delete
    By i mistake i assign 2 billing profiles to same reseller

    How i can remove profile bill?? please


    El 30/11/17 16:05, "David | csr-online SPAIN" <davidp at csr-online.net> escribi?:

        Working invoices thansk a lot


        El 30/11/17 11:45, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

            Thanks a lot i try

            El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

                Dear David,

                you need to upgrade ngcp-panel with command:

                         apt-get install ngcp-panel

                and after that restart ngcp-panel service:

                         service ngcp-panel restart

                Best regards,
                Irina Peshinskaya

                On 30.11.2017 12:41, David | csr-online SPAIN wrote:
                > Sorry for this question what steps i do to install/upgrade to the fix?
                >
                > Thank you
                >
                >
                > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
                >
                >      Dear David,
                >
                >      We have released a hotfix for this issue.
                >      Kindly find the fix in the ngcp-panel mr5.5.1.5
                >
                >      Best regards,
                >      Irina Peshinskaya
                >
                >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
                >      > I try with all reseller,s customers and the error always the same in version 5.5.1
                >      >
                >      > In panel.log the error was:
                >      >
                >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
                >      >
                >      >
                >      > Thank you very much
                >      >
                >      >
                >      >
                >      > Cordialment | Atentamente | Sincerely
                >      > David Pablo Mitchell
                >      > CTO
                >      >
                >      > CSR ONLINE
                >      > Movil: +34 658174990
                >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
                >      > Mail: davidp at csr-online.net
                >      > Web: www.csr-online.net
                >      > You run your business, we run your IT.
                >      >
                >      >
                >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
                >      > _______________________________________________
                >      > Spce-user mailing list
                >      > Spce-user at lists.sipwise.com
                >      > https://lists.sipwise.com/listinfo/spce-user
                >
                >
                >
                >
                >
                > Cordialment | Atentamente | Sincerely
                > David Pablo Mitchell
                > CTO
                >
                > CSR ONLINE
                > Movil: +34 658174990
                > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
                > Mail: davidp at csr-online.net
                > Web: www.csr-online.net
                > You run your business, we run your IT.
                >
                >
                > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





            Cordialment | Atentamente | Sincerely
            David Pablo Mitchell
            CTO

            CSR ONLINE
            Movil: +34 658174990
            Tel.Oficina:+34 931860160 / +34 902056355  ext.101
            Mail: davidp at csr-online.net
            Web: www.csr-online.net
            You run your business, we run your IT.


            La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
            _______________________________________________
            Spce-user mailing list
            Spce-user at lists.sipwise.com
            https://lists.sipwise.com/listinfo/spce-user

            Cordialment | Atentamente | Sincerely




            Movil:
            Tel.Oficina:
            Mail:
            Web: www.csr-online.net
            You run your business, we run your IT.


            La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





    Cordialment | Atentamente | Sincerely
    David Pablo Mitchell
    CTO

    CSR ONLINE
    Movil: +34 658174990
    Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    Mail: davidp at csr-online.net
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    _______________________________________________
    Spce-user mailing list
    Spce-user at lists.sipwise.com
    https://lists.sipwise.com/listinfo/spce-user

    Cordialment | Atentamente | Sincerely




    Movil:
    Tel.Oficina:
    Mail:
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From stefanormc at gmail.com  Thu Nov 30 16:13:53 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 13:13:53 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
 <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
 <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>
Message-ID: <CAHTRqyWLE_ec2PsJBXEQrOMqUdY=W7+9dF2=Pn8ygE580U7BuQ@mail.gmail.com>

So I wiped and reconfigured peer/subscriber and now is registered again.

I Get a 403 error, relaying not allowed

Any suggestions?

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Call from trusted
peer with uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Rejecting peering
attempt with non-local request domain -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
source-leg for uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd':
'eee76c3b-1019-411d-b1f4-6815e2e76bdd|<null>|<null>|0|||0||||call|<null>|1512076297.538332||||||||||||0|'
- R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
destination-leg for uuid '0':
'0|||0|<null>|0|3355416588|94.125.235.56|||0||||||||||||3355416588|' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3463]: NOTICE: <script>: New request on
proxy - M=ACK R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Thanks

Stefano



On 30 November 2017 at 16:49:47, stefanormc (stefanormc at gmail.com) wrote:

Still not working!

I did manage to send calls from peer ?> subscriber but I get a 407 error

I can?t seem to get the peer registered against the subscriber as I did
yesterday

I first configured the web interface and then manually updated
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2;
then I re-applied ngcpcfg but no registration

How do I match credentials in reg_agent to the right peer?




Il giorno 30 novembre 2017 @ 15:06:41, stefanormc (stefanormc at gmail.com) ha
scritto:

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/11fb19a2/attachment.html>

From stefanormc at gmail.com  Thu Nov 30 16:29:22 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 13:29:22 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyWLE_ec2PsJBXEQrOMqUdY=W7+9dF2=Pn8ygE580U7BuQ@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
 <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
 <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>
 <CAHTRqyWLE_ec2PsJBXEQrOMqUdY=W7+9dF2=Pn8ygE580U7BuQ@mail.gmail.com>
Message-ID: <CAHTRqyW5uLH=zfHknTC91XA4CHqPAY-nAFMVyCZxYCbMhBFAjQ@mail.gmail.com>

If I remove the ?trusted source ip? I get a 407 error.

Apparently tries to apply the caller?s realm to the subscriber auth and it
fails to authenticate

Proxy-Authorization: Digest username="0110002222", realm="d.voceblu.it",
nonce="WiB2m1ogdW+McwtYdiMw6t/WoFxcsYiR",
uri="sip:3355416588 at 94.125.235.56:5060;transport=udp",
response="4fd4ed9b67e55d141fb57bc193d08bd6", algorithm=MD5


But this is how it is configured:

domain=c.voceblu.it

user=0110002222

pwd=xxxxxxxxxxxxxxx

proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]

[% IF sip_adv_ips.size -%]

contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]

[% ELSE -%]

contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]

[% END -%]





On 30 November 2017 at 22:13:53, stefanormc (stefanormc at gmail.com) wrote:

So I wiped and reconfigured peer/subscriber and now is registered again.

I Get a 403 error, relaying not allowed

Any suggestions?

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Call from trusted
peer with uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Rejecting peering
attempt with non-local request domain -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
source-leg for uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd':
'eee76c3b-1019-411d-b1f4-6815e2e76bdd|<null>|<null>|0|||0||||call|<null>|1512076297.538332||||||||||||0|'
- R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
destination-leg for uuid '0':
'0|||0|<null>|0|3355416588|94.125.235.56|||0||||||||||||3355416588|' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3463]: NOTICE: <script>: New request on
proxy - M=ACK R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Thanks

Stefano



On 30 November 2017 at 16:49:47, stefanormc (stefanormc at gmail.com) wrote:

Still not working!

I did manage to send calls from peer ?> subscriber but I get a 407 error

I can?t seem to get the peer registered against the subscriber as I did
yesterday

I first configured the web interface and then manually updated
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2;
then I re-applied ngcpcfg but no registration

How do I match credentials in reg_agent to the right peer?




Il giorno 30 novembre 2017 @ 15:06:41, stefanormc (stefanormc at gmail.com) ha
scritto:

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20171130/58b65455/attachment.html>

From skipot at sipwise.com  Fri Nov  3 06:50:07 2017
From: skipot at sipwise.com (sergii kipot)
Date: Fri, 3 Nov 2017 11:50:07 +0100
Subject: [Spce-user] New sip:provider CE mr5.5.1 is now available
Message-ID: <dbc6a916-9b73-498d-02c2-ba95d569963a@sipwise.com>

Dear community!

This is to inform you about the availability of the new SPCE mr5.5.1 !

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images have
been uploaded, please check the handbook for all the details:
https://www.sipwise.org/doc/mr5.5.1/spce/ar01s04.html

Please find the list of all changes on our web site:
https://www.sipwise.org/news/announcements/sipprovider-mr5-5-1-released/
//The release mr5.5 is official LTS release. It will be supported till Oct 31, 2020//
Please report issues if any on this mailing list and thank you for being a part of the community!


-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171103/1d4847ce/attachment-0001.html>

From stefanormc at gmail.com  Sat Nov  4 12:13:47 2017
From: stefanormc at gmail.com (stefanormc)
Date: Sat, 4 Nov 2017 12:13:47 -0400
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
Message-ID: <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171104/c6305c8d/attachment-0001.html>

From henk at voipdigit.nl  Sat Nov  4 15:55:06 2017
From: henk at voipdigit.nl (Henk)
Date: Sat, 4 Nov 2017 20:55:06 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
Message-ID: <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>

Hi Stefano,

I had the same problem when I made a connection to an authorization 
domain which was not the same as the server address. In some clients you 
have to use the proxy setting to specify the server address. The 
kamailio proxy checks the domain against the known domains (domain table 
in the kamailio db). I solved this by adding the proxy domain in SPCE. 
Hope this helps for you too.

Regards,

Henk Plessius


On 4-11-2017 17:13, stefanormc wrote:
> Hello again,
>
> Anyone?? No ideas?
>
> I?m stuck
>
> Thanks
>
> Ciao
>
> Stefano
>
>
>
> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
> <mailto:stefanormc at gmail.com>) wrote:
>
>>
>> Hi all,
>>
>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>> problem on outbound calls from certain clients that are correctly 
>> registered and have no problem on inbound calls.
>>
>> This what I see in spce log:
>>
>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request 
>> on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>> F=sip:0119649202 at voceblu.it 
>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>> T=sip:0110133301 at voceblu.it 
>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone IP=172.26.4.92:1024 
>> <http://172.26.4.92:1024> (127.0.0.1:5060 <http://127.0.0.1:5060>) 
>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2'
>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>
>> Outbound calls worked fine before upgrading
>>
>> Any hint where the problem might lie?
>>
>> Thanks
>>
>> stefano
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171104/831d876e/attachment-0001.html>

From stefanormc at gmail.com  Sun Nov  5 13:31:20 2017
From: stefanormc at gmail.com (stefanormc)
Date: Sun, 5 Nov 2017 13:31:20 -0500
Subject: [Spce-user] loose-routing
In-Reply-To: <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
Message-ID: <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>

Hi Henk,

I?m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171105/6124b4d4/attachment-0001.html>

From henk at voipdigit.nl  Sun Nov  5 15:29:55 2017
From: henk at voipdigit.nl (Henk)
Date: Sun, 5 Nov 2017 21:29:55 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
Message-ID: <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>

Hi Stefano,

I had to add the DNS name of my server to SPCE as a dummy domain to stop 
the loose-routing error. But if I look at your log, it seems you are 
using _voceblu.it_ and not geva.voceblu.it.
<http://geva.voceblu.it>Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if 
the destination uri domain is local, if this fails it produces the 
loose-route error:

         if(!has_totag())
         {
             if($du != $null && _*is_domain_local("$dd")*_)
             {
                 xlog("L_INFO", "Reset initial local route - R=$ru 
ID=$ci UA='$ua'\n");
                 $du = $null;
             }
             else
             {
                 xlog("L_NOTICE", "_*Initial loose-routing rejected*_ - 
R=$ru ID=$ci UA='$ua'\n");
                 sl_send_reply("403", "Initial Loose-Routing Forbidden");
                 exit;
             }
         }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:
> Hi Henk,
>
> I?m no too sure what you mean. What proxy domain do you refer to?
>
> In my case, user is XXXXX at geva.voceblu.it 
> <mailto:XXXXX at geva.voceblu.it> and I have geva.voceblu.it 
> <http://geva.voceblu.it> realm configured
>
> Proxy is centrale.aXXXXXXti.it <http://centrale.aXXXXXXti.it> that 
> seems to be correctly configured on the Grandstream ATA
>
> Thanks
>
> ciao
>
> Stefano
>
> On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl 
> <mailto:henk at voipdigit.nl>) wrote:
>
>> Hi Stefano,
>>
>> I had the same problem when I made a connection to an authorization 
>> domain which was not the same as the server address. In some clients 
>> you have to use the proxy setting to specify the server address. The 
>> kamailio proxy checks the domain against the known domains (domain 
>> table in the kamailio db). I solved this by adding the proxy domain 
>> in SPCE. Hope this helps for you too.
>>
>> Regards,
>>
>> Henk Plessius
>>
>>
>> On 4-11-2017 17:13, stefanormc wrote:
>>> Hello again,
>>>
>>> Anyone?? No ideas?
>>>
>>> I?m stuck
>>>
>>> Thanks
>>>
>>> Ciao
>>>
>>> Stefano
>>>
>>>
>>>
>>> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
>>> <mailto:stefanormc at gmail.com>) wrote:
>>>
>>>>
>>>> Hi all,
>>>>
>>>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>>>> problem on outbound calls from certain clients that are correctly 
>>>> registered and have no problem on inbound calls.
>>>>
>>>> This what I see in spce log:
>>>>
>>>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request 
>>>> on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>> F=sip:0119649202 at voceblu.it 
>>>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>>>> T=sip:0110133301 at voceblu.it 
>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone IP=172.26.4.92:1024 
>>>> <http://172.26.4.92:1024> (127.0.0.1:5060 <http://127.0.0.1:5060>) 
>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2'
>>>> Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>>>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>>>
>>>> Outbound calls worked fine before upgrading
>>>>
>>>> Any hint where the problem might lie?
>>>>
>>>> Thanks
>>>>
>>>> stefano
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171105/b21746f6/attachment-0001.html>

From stephen at belzonicable.net  Sun Nov  5 23:44:56 2017
From: stephen at belzonicable.net (Stephen Donovan)
Date: Sun, 5 Nov 2017 22:44:56 -0600 (CST)
Subject: [Spce-user] spce 2.8 rtpproxy seems to not work.
Message-ID: <2028531298.6918.1509943496867.JavaMail.zimbra@belzonicable.net>

Customer complaining of calls with no audio/one way audio. Upon investigation, Even though rtp proxy is enabled on the account, I'm seeing media from many different ip addresses. since the endpoint is behind a VPN with private addressing and NAT, that seems to be the cause of the broken audio. Is there anything in particular I should look for to diagnose and repair the problem? I have another spce 2.8 vm that does not have this issue. 



_______________________________ 
Stephen Donovan 
Owner 
Belzoni Cable, LLC 
SIP Solutions, LLC 
16014 US Hwy 49 
Belzoni, MS 39038 
662-247-3502 direct 
stephen at belzonicable.net 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171105/c5f81cce/attachment-0001.html>

From dgrotti at sipwise.com  Mon Nov  6 03:43:42 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 09:43:42 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
Message-ID: <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing 
is the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:
>
> Hi Stefano,
>
> I had to add the DNS name of my server to SPCE as a dummy domain to 
> stop the loose-routing error. But if I look at your log, it seems you 
> are using _voceblu.it_ and not geva.voceblu.it.
> <http://geva.voceblu.it>Are both domains existing in SPCE?
>
>
> In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see 
> if the destination uri domain is local, if this fails it produces the 
> loose-route error:
>
> ??? ??? if(!has_totag())
> ??? ??? {
> ??? ??? ??? if($du != $null && _*is_domain_local("$dd")*_)
> ??? ??? ??? {
> ??? ??? ??? ??? xlog("L_INFO", "Reset initial local route - R=$ru 
> ID=$ci UA='$ua'\n");
> ??? ??? ??? ??? $du = $null;
> ??? ??? ??? }
> ??? ??? ??? else
> ??? ??? ??? {
> ??? ??? ??? ??? xlog("L_NOTICE", "_*Initial loose-routing rejected*_ - 
> R=$ru ID=$ci UA='$ua'\n");
> ??? ??? ??? ??? sl_send_reply("403", "Initial Loose-Routing Forbidden");
> ??? ??? ??? ??? exit;
> ??? ??? ??? }
> ??? ??? }
>
> Hope this helps,
>
> Regards,
>
> Henk Plessius
>
> On 5-11-2017 19:31, stefanormc wrote:
>> Hi Henk,
>>
>> I?m no too sure what you mean. What proxy domain do you refer to?
>>
>> In my case, user is XXXXX at geva.voceblu.it 
>> <mailto:XXXXX at geva.voceblu.it>?and I have geva.voceblu.it 
>> <http://geva.voceblu.it> realm configured
>>
>> Proxy is centrale.aXXXXXXti.it <http://centrale.aXXXXXXti.it>?that 
>> seems to be correctly configured on the Grandstream ATA
>>
>> Thanks
>>
>> ciao
>>
>> Stefano
>>
>> On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl 
>> <mailto:henk at voipdigit.nl>) wrote:
>>
>>> Hi Stefano,
>>>
>>> I had the same problem when I made a connection to an authorization 
>>> domain which was not the same as the server address. In some clients 
>>> you have to use the proxy setting to specify the server address. The 
>>> kamailio proxy checks the domain against the known domains (domain 
>>> table in the kamailio db). I solved this by adding the proxy domain 
>>> in SPCE. Hope this helps for you too.
>>>
>>> Regards,
>>>
>>> Henk Plessius
>>>
>>>
>>> On 4-11-2017 17:13, stefanormc wrote:
>>>> Hello again,
>>>>
>>>> Anyone?? No ideas?
>>>>
>>>> I?m stuck
>>>>
>>>> Thanks
>>>>
>>>> Ciao
>>>>
>>>> Stefano
>>>>
>>>>
>>>>
>>>> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
>>>> <mailto:stefanormc at gmail.com>) wrote:
>>>>
>>>>>
>>>>> Hi all,
>>>>>
>>>>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>>>>> problem on outbound calls from certain clients that are correctly 
>>>>> registered and have no problem on inbound calls.
>>>>>
>>>>> This what I see in spce log:
>>>>>
>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New 
>>>>> request on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>> F=sip:0119649202 at voceblu.it 
>>>>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>>>>> T=sip:0110133301 at voceblu.it 
>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>> IP=172.26.4.92:1024 <http://172.26.4.92:1024> (127.0.0.1:5060 
>>>>> <http://127.0.0.1:5060>) ID=1052434700-5060-11 at BJC.BGI.B.H 
>>>>> UA='Grandstream HT701 1.0.8.2'
>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>>>>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>>>>
>>>>> Outbound calls worked fine before upgrading
>>>>>
>>>>> Any hint where the problem might lie?
>>>>>
>>>>> Thanks
>>>>>
>>>>> stefano
>>>>
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/08e59610/attachment-0001.html>

From alutay at sipwise.com  Mon Nov  6 04:00:03 2017
From: alutay at sipwise.com (Alex Lutay)
Date: Mon, 6 Nov 2017 10:00:03 +0100
Subject: [Spce-user] spce 2.8 rtpproxy seems to not work.
In-Reply-To: <2028531298.6918.1509943496867.JavaMail.zimbra@belzonicable.net>
References: <2028531298.6918.1509943496867.JavaMail.zimbra@belzonicable.net>
Message-ID: <79fd6c6e-ff06-0056-aa9e-059e0a0d691d@sipwise.com>

Hi,

I am strongly believe it is a local configuration issue,
as 2.8 is not being touched/supported for a year(s).

Please consider to upgrade to the modern supported releases,
the latest LTS release is mr5.5

Release 2.8 based on Debian Squeeze which contains long list of
known security issues for a bunch of components.

On 11/06/2017 05:44 AM, Stephen Donovan wrote:
> Upon investigation, Even though rtp proxy is enabled on the account, I'm
> seeing media from many different ip addresses.? since the endpoint is
> behind a VPN with private addressing and NAT, that seems to be the cause
> of the broken audio.? Is there anything in particular I should look for
> to diagnose and repair the problem?? I have another spce 2.8 vm that
> does not have this issue.

-- 
Alex Lutay


From stefanormc at gmail.com  Mon Nov  6 04:04:39 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 01:04:39 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
Message-ID: <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>

I have both domains configured, one is a reseller.
There are approx 100 subscribers working on each domain but they are both
giving the same error on the same device, a grandstream ht701 ATA

if by local domain you mean configured under ?domains? in spce, then they
both are. I have not configured the dns proxy name as suggested by Henk
yet. I?ll try that today.

#ResellerDomain
6 PSA voceblu.it
7 G-Eva geva.voceblu.it


thanks

ciao

stefano


Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing is
the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:

Hi Stefano,
I had to add the DNS name of my server to SPCE as a dummy domain to stop
the loose-routing error. But if I look at your log, it seems you are
using *voceblu.it
<http://voceblu.it>* and not geva.voceblu.it.
<http://geva.voceblu.it> Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if the
destination uri domain is local, if this fails it produces the loose-route
error:

        if(!has_totag())
        {
            if($du != $null && *is_domain_local("$dd")*)
            {
                xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci
UA='$ua'\n");
                $du = $null;
            }
            else
            {
                xlog("L_NOTICE", "*Initial loose-routing rejected* - R=$ru
ID=$ci UA='$ua'\n");
                sl_send_reply("403", "Initial Loose-Routing Forbidden");
                exit;
            }
        }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:

Hi Henk,

I?m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user




_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/d27d10aa/attachment-0001.html>

From alutay at sipwise.com  Mon Nov  6 04:47:23 2017
From: alutay at sipwise.com (Alex Lutay)
Date: Mon, 6 Nov 2017 10:47:23 +0100
Subject: [Spce-user] connect sipwise in the cloud
In-Reply-To: <CAPR5FSi2PU7aY=ZbNBVrzTCTxEZt7vDmvK=LNvxwbVhfhA_dpg@mail.gmail.com>
References: <CAPR5FSi2PU7aY=ZbNBVrzTCTxEZt7vDmvK=LNvxwbVhfhA_dpg@mail.gmail.com>
Message-ID: <de198759-be47-ef72-69f9-cc274bc67586@sipwise.com>

Hi,

It is not clear from this side what you are trying to achieve and
which issues you have noticed. Can you please share more details here?

Tnx!

On 10/31/2017 03:18 PM, moises rosas wrote:
> Hi. I'm trying to connect the sipwise to the cloud, but I do not have
> much information on how to do it, thanks in advance.

-- 
Alex Lutay



From stefanormc at gmail.com  Mon Nov  6 05:15:03 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 02:15:03 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
Message-ID: <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>

I added the dns name in the domains section but still getting the same
problem:

Nov  6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0322259098 at c.voceblu.it F=sip:0119084086 at c.voceblu.it
T=sip:0322259098 at c.voceblu.it IP=178.255.188.147:58296 (127.0.0.1:5060)
ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'

Nov  6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:centrale03.avanzati.it
ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'

this is a different customer with a Gigaset PBX with a PJSIP trunk
c.voceblu.it is a valid local domain as well as centrale03.avanzati.it

What happens if I disable that part of the script?



Il giorno 6 novembre 2017 @ 10:04:39, stefanormc (stefanormc at gmail.com) ha
scritto:

I have both domains configured, one is a reseller.
There are approx 100 subscribers working on each domain but they are both
giving the same error on the same device, a grandstream ht701 ATA

if by local domain you mean configured under ?domains? in spce, then they
both are. I have not configured the dns proxy name as suggested by Henk
yet. I?ll try that today.

# Reseller Domain
6 PSA voceblu.it
7 G-Eva geva.voceblu.it


thanks

ciao

stefano


Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing is
the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:

Hi Stefano,
I had to add the DNS name of my server to SPCE as a dummy domain to stop
the loose-routing error. But if I look at your log, it seems you are
using *voceblu.it
<http://voceblu.it>* and not geva.voceblu.it.
<http://geva.voceblu.it> Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if the
destination uri domain is local, if this fails it produces the loose-route
error:

        if(!has_totag())
        {
            if($du != $null && *is_domain_local("$dd")*)
            {
                xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci
UA='$ua'\n");
                $du = $null;
            }
            else
            {
                xlog("L_NOTICE", "*Initial loose-routing rejected* - R=$ru
ID=$ci UA='$ua'\n");
                sl_send_reply("403", "Initial Loose-Routing Forbidden");
                exit;
            }
        }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:

Hi Henk,

I?m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone?? No ideas?

I?m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I?m experiencing a ?loose routing? problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user




_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/7c1f6119/attachment-0001.html>

From dgrotti at sipwise.com  Mon Nov  6 05:18:39 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 11:18:39 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
Message-ID: <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>

Hi Stefano,
what is "c.voceblu.it" ?
This is not part of your domain, or ?
Also, can you kindly post the output from the following commands:

1) mysql> select * from kamailio.domain;
2) # ngcp-kamctl proxy fifo domain_dump


Thanks,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:15 AM, stefanormc wrote:
> I added the dns name in the domains section but still getting the same 
> problem:
>
> Nov? 6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: New request 
> on proxy - M=INVITE R=sip:0322259098 at c.voceblu.it 
> <mailto:sip%3A0322259098 at c.voceblu.it> F=sip:0119084086 at c.voceblu.it 
> <mailto:sip%3A0119084086 at c.voceblu.it> T=sip:0322259098 at c.voceblu.it 
> <mailto:sip%3A0322259098 at c.voceblu.it> IP=178.255.188.147:58296 
> <http://178.255.188.147:58296> (127.0.0.1:5060 
> <http://127.0.0.1:5060>) ID=418017e2-baee-4baa-9e60-13e95ebc6f5b 
> UA='Gigaset T440/T640'
>
> Nov? 6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: Initial 
> loose-routing rejected - R=sip:centrale03.avanzati.it 
> <http://centrale03.avanzati.it> 
> ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'
>
>
> this is a different customer with a Gigaset PBX with a PJSIP trunk
> c.voceblu.it <http://c.voceblu.it>?is a valid local domain as well as 
> centrale03.avanzati.it <http://centrale03.avanzati.it>
>
> What happens if I disable that part of the script?
>
>
>
> Il giorno 6 novembre 2017 @ 10:04:39, stefanormc (stefanormc at gmail.com 
> <mailto:stefanormc at gmail.com>) ha scritto:
>
>> I have both domains configured, one is a reseller.
>> There are approx 100 subscribers working on each domain but they are 
>> both giving the same error on the same device, a grandstream ht701 ATA
>>
>> if by local domain you mean configured under ?domains? in spce, then 
>> they both are. I have not configured the dns proxy name as suggested 
>> by Henk yet. I?ll try that today.
>>
>> # 	Reseller 	Domain 	
>> 6 	PSA 	voceblu.it <http://voceblu.it> 	
>> 7 	G-Eva 	geva.voceblu.it <http://geva.voceblu.it>
>>
>>
>>
>> thanks
>>
>> ciao
>>
>> stefano
>>
>>
>> Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti 
>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>
>>> Hi Stefano,
>>> looks like veceblu.it <http://veceblu.it> is not a local domain, the 
>>> check that is failing is the one provided by Henk:
>>>
>>> if($du != $null && is_domain_local("$dd"))
>>>
>>> -- Daniel Grotti Head of Customer Support Sipwise GmbH, Campus 
>>> 21/Europaring F15 AT-2345 Brunn am Gebirge Office: +43(0)130120332 
>>> Email: dgrotti at sipwise.com Website: https://www.sipwise.com
>>> On 11/05/2017 09:29 PM, Henk wrote:
>>>>
>>>> Hi Stefano,
>>>>
>>>> I had to add the DNS name of my server to SPCE as a dummy domain to 
>>>> stop the loose-routing error. But if I look at your log, it seems 
>>>> you are using _voceblu.it <http://voceblu.it>_ and not geva.voceblu.it.
>>>> <http://geva.voceblu.it> Are both domains existing in SPCE?
>>>>
>>>>
>>>> In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to 
>>>> see if the destination uri domain is local, if this fails it 
>>>> produces the loose-route error:
>>>>
>>>> ??? ??? if(!has_totag())
>>>> ??? ??? {
>>>> ??? ??? ??? if($du != $null && _*is_domain_local("$dd")*_)
>>>> ??? ??? ??? {
>>>> ??? xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci 
>>>> UA='$ua'\n");
>>>> ??? $du = $null;
>>>> ??? ??? ??? }
>>>> ??? ??? ??? else
>>>> ??? ??? ??? {
>>>> ??? xlog("L_NOTICE", "_*Initial loose-routing rejected*_ - R=$ru 
>>>> ID=$ci UA='$ua'\n");
>>>> ??? sl_send_reply("403", "Initial Loose-Routing Forbidden");
>>>> ??? exit;
>>>> ??? ??? ??? }
>>>> ??? ??? }
>>>>
>>>> Hope this helps,
>>>>
>>>> Regards,
>>>>
>>>> Henk Plessius
>>>>
>>>> On 5-11-2017 19:31, stefanormc wrote:
>>>>> Hi Henk,
>>>>>
>>>>> I?m no too sure what you mean. What proxy domain do you refer to?
>>>>>
>>>>> In my case, user is XXXXX at geva.voceblu.it 
>>>>> <mailto:XXXXX at geva.voceblu.it>?and I have geva.voceblu.it 
>>>>> <http://geva.voceblu.it> realm configured
>>>>>
>>>>> Proxy is centrale.aXXXXXXti.it <http://centrale.aXXXXXXti.it>?that 
>>>>> seems to be correctly configured on the Grandstream ATA
>>>>>
>>>>> Thanks
>>>>>
>>>>> ciao
>>>>>
>>>>> Stefano
>>>>>
>>>>> On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl 
>>>>> <mailto:henk at voipdigit.nl>) wrote:
>>>>>
>>>>>> Hi Stefano,
>>>>>>
>>>>>> I had the same problem when I made a connection to an 
>>>>>> authorization domain which was not the same as the server 
>>>>>> address. In some clients you have to use the proxy setting to 
>>>>>> specify the server address. The kamailio proxy checks the domain 
>>>>>> against the known domains (domain table in the kamailio db). I 
>>>>>> solved this by adding the proxy domain in SPCE. Hope this helps 
>>>>>> for you too.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Henk Plessius
>>>>>>
>>>>>>
>>>>>> On 4-11-2017 17:13, stefanormc wrote:
>>>>>>> Hello again,
>>>>>>>
>>>>>>> Anyone?? No ideas?
>>>>>>>
>>>>>>> I?m stuck
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Ciao
>>>>>>>
>>>>>>> Stefano
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com 
>>>>>>> <mailto:stefanormc at gmail.com>) wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> I just updated to 5.4.1 and I?m experiencing a ?loose routing? 
>>>>>>>> problem on outbound calls from certain clients that are 
>>>>>>>> correctly registered and have no problem on inbound calls.
>>>>>>>>
>>>>>>>> This what I see in spce log:
>>>>>>>>
>>>>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New 
>>>>>>>> request on proxy - M=INVITE R=sip:0110133301 at voceblu.it 
>>>>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>>>>> F=sip:0119649202 at voceblu.it 
>>>>>>>> <mailto:sip%3A0119649202 at voceblu.it>;user=phone 
>>>>>>>> T=sip:0110133301 at voceblu.it 
>>>>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>>>>> IP=172.26.4.92:1024 <http://172.26.4.92:1024> (127.0.0.1:5060 
>>>>>>>> <http://127.0.0.1:5060>) ID=1052434700-5060-11 at BJC.BGI.B.H 
>>>>>>>> UA='Grandstream HT701 1.0.8.2'
>>>>>>>> Oct ?3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial 
>>>>>>>> loose-routing rejected - R=sip:0110133301 at voceblu.it 
>>>>>>>> <mailto:sip%3A0110133301 at voceblu.it>;user=phone 
>>>>>>>> ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2?
>>>>>>>>
>>>>>>>> Outbound calls worked fine before upgrading
>>>>>>>>
>>>>>>>> Any hint where the problem might lie?
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>>
>>>>>>>> stefano
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/c443dd90/attachment-0001.html>

From stefanormc at gmail.com  Mon Nov  6 05:24:00 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 02:24:00 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
Message-ID: <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>

MariaDB [ngcp]> select * from kamailio.domain;

+----+----------------------------+---------------------+------+

| id | domain                     | last_modified       | did  |

+----+----------------------------+---------------------+------+

|  1 | voip.sipwise.local         | 1900-01-01 00:00:01 | NULL |

|  2 | sipd.bandablu.com          | 1900-01-01 00:00:01 | NULL |

|  3 | d.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  5 | c.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  8 | netgen.voceblu.it          | 1900-01-01 00:00:01 | NULL |

| 11 | res.voceblu.it             | 1900-01-01 00:00:01 | NULL |

| 12 | via-bolletta.telefonica.it | 1900-01-01 00:00:01 | NULL |

| 13 | centrale03.avanzati.it     | 1900-01-01 00:00:01 | NULL |

+----+----------------------------+---------------------+------+

*8 rows in set (0.02 sec)*



centrale03:~# ngcp-kamctl proxy fifo domain_dump

domain:: sipd.bandablu.com

did:: sipd.bandablu.com

domain:: voip.sipwise.local

did:: voip.sipwise.local

domain:: via-bolletta.telefonica.it

did:: via-bolletta.telefonica.it

domain:: centrale03.avanzati.it

did:: centrale03.avanzati.it

domain:: res.voceblu.it

did:: res.voceblu.it

domain:: d.voceblu.it

did:: d.voceblu.it

domain:: c.voceblu.it

did:: c.voceblu.it

domain:: netgen.voceblu.it

did:: netgen.voceblu.it


Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

select * from kamailio.domain;
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/8223fbb5/attachment-0001.html>

From dgrotti at sipwise.com  Mon Nov  6 05:34:12 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 11:34:12 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
Message-ID: <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>

mmm...so the problem could be in the $du variable.
Since loose_route() return TRUE, it means that the INVITE contains a 
Route header.

Can you take a trace of such call (with sngrep for example) and paste 
here the INVITE you receive from this UA ?


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:24 AM, stefanormc wrote:
>
> MariaDB [ngcp]> select * from kamailio.domain;
>
> +----+----------------------------+---------------------+------+
>
> | id | domain ? ? ? ? ? ? ? ? ? ? | last_modified ? ? ? | did? |
>
> +----+----------------------------+---------------------+------+
>
> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>
> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
> 1900-01-01 00:00:01 | NULL |
>
> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? ? ? | 1900-01-01 
> 00:00:01 | NULL |
>
> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? ? ? | 1900-01-01 
> 00:00:01 | NULL |
>
> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
> 1900-01-01 00:00:01 | NULL |
>
> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? ? | 1900-01-01 
> 00:00:01 | NULL |
>
> | 12 | via-bolletta.telefonica.it <http://via-bolletta.telefonica.it> 
> | 1900-01-01 00:00:01 | NULL |
>
> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? | 
> 1900-01-01 00:00:01 | NULL |
>
> +----+----------------------------+---------------------+------+
>
> *8 rows in set (0.02 sec)*
>
> *
> *
> *
> *
> *
> *
>
> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>
> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>
> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>
> domain:: voip.sipwise.local
>
> did:: voip.sipwise.local
>
> domain:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>
> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>
> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>
> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>
> domain:: res.voceblu.it <http://res.voceblu.it>
>
> did:: res.voceblu.it <http://res.voceblu.it>
>
> domain:: d.voceblu.it <http://d.voceblu.it>
>
> did:: d.voceblu.it <http://d.voceblu.it>
>
> domain:: c.voceblu.it <http://c.voceblu.it>
>
> did:: c.voceblu.it <http://c.voceblu.it>
>
> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>
> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>
>
>
> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>
>> select * from kamailio.domain;

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/4c671ece/attachment-0001.html>

From stefanormc at gmail.com  Mon Nov  6 05:56:55 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 6 Nov 2017 02:56:55 -0800
Subject: [Spce-user] loose-routing
In-Reply-To: <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
Message-ID: <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>

Great tool!

*                                                                 Call flow
for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by Request/Response)*


                                            ?*INVITE*
*sip:centrale03.avanzati.it
<http://centrale03.avanzati.it>* SIP/2.0

          178.255.188.147:42652           *94.125.235.56:5060
<http://94.125.235.56:5060>*              *127.0.0.1:5060
<http://127.0.0.1:5060>*                *127.0.0.1:5062
<http://127.0.0.1:5062>*  ?Via: SIP/2.0/UDP 192.168.192.50:5070
;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13

          ????????????????????          ????????????????????
????????????????????          ?????????????????????0f185f8

                    ? *       INVITE (SDP)        * ?
      ?                             ?         ?From: <
sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417

  *11:44:32.102554*   ? *??????????????????????????>* ?
        ?                             ?         ?To: <
sip:3482209875 at c.voceblu.it>

        +0.000462   ?                             ?
    ?        INVITE (SDP)         ?         ?Contact: <
sip:0119084086 at 192.168.192.50:5070>

  11:44:32.103016   ?                             ?
    ? ??????????????????????????> ?         ?Call-ID:
*4ae7566c-c8ab-4b29-9950-d6829953f085*

        +0.000214   ?                             ?
    ?         100 Trying          ?         ?CSeq: 20617 INVITE

  11:44:32.103230   ?                             ?
    ? <?????????????????????????? ?         ?Allow: OPTIONS, SUBSCRIBE,
NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R

        +0.000176   ?                             ?
    ?  403 Initial Loose-Routing  ?         ?ISTER, REFER, MESSAGE

  11:44:32.103406   ?                             ?
    ? <?????????????????????????? ?         ?Supported: 100rel, timer,
replaces, norefersub

        +0.000194   ?         100 Trying          ?
    ?                             ?         ?Session-Expires: 1800

  11:44:32.103600   ? <?????????????????????????? ?
    ?                             ?         ?Min-SE: 90

        +0.000060   ?  403 Initial Loose-Routing  ?
    ?                             ?         ?P-Asserted-Identity:
<sip:112 at galilei.local>

  11:44:32.103660   ? <?????????????????????????? ?
    ?                             ?         ?P-Preferred-Identity:
<sip:112 at galilei.local>

        +0.010267   ?             ACK             ?
    ?                             ?         ?Route: <
sip:3482209875 at c.voceblu.it>

  11:44:32.113927   ? ??????????????????????????> ?
    ?                             ?         ?Max-Forwards: 70

        +0.000254   ?                             ?
    ?             ACK             ?         ?User-Agent: Gigaset T440/T640

  11:44:32.114181   ?                             ?
    ? ??????????????????????????> ?         ?Content-Type: application/sdp

                    ?                             ?
    ?                             ?         ?Content-Length:   239

                    ?                             ?
    ?                             ?         ?

                    ?                             ?
    ?                             ?         ?v=0

                    ?                             ?
    ?                             ?         ?o=- 370697073 370697073 IN IP4
192.168.192.50

                    ?                             ?
    ?                             ?         ?s=Asterisk

                    ?                             ?
    ?                             ?         ?c=IN IP4 192.168.192.50

                    ?                             ?
    ?                             ?         ?t=0 0

                    ?                             ?
    ?                             ?         ?m=audio 12360 RTP/AVP 0 101

                    ?                             ?
    ?                             ?         ?a=rtpmap:0 PCMU/8000

                    ?                             ?
    ?                             ?         ?a=rtpmap:101
telephone-event/8000

                    ?                             ?
    ?                             ?         ?a=fmtp:101 0-16

                    ?                             ?
    ?                             ?         ?a=ptime:20

                    ?                             ?
    ?                             ?         ?a=maxptime:150

                    ?                             ?
    ?                             ?         ?a=sendrecv

                    ?                             ?
    ?                             ?         ?

                    ?                             ?
    ?                             ?         ?

                    ?                             ?
    ?                             ?         ?

can it be the p-asserted-identity the problem? I see is the PBX endpoint
instead of the sipwise account




Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

mmm...so the problem could be in the $du variable.
Since loose_route() return TRUE, it means that the INVITE contains a Route
header.

Can you take a trace of such call (with sngrep for example) and paste here
the INVITE you receive from this UA ?


--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:24 AM, stefanormc wrote:

MariaDB [ngcp]> select * from kamailio.domain;

+----+----------------------------+---------------------+------+

| id | domain                     | last_modified       | did  |

+----+----------------------------+---------------------+------+

|  1 | voip.sipwise.local         | 1900-01-01 00:00:01 | NULL |

|  2 | sipd.bandablu.com          | 1900-01-01 00:00:01 | NULL |

|  3 | d.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  5 | c.voceblu.it               | 1900-01-01 00:00:01 | NULL |

|  8 | netgen.voceblu.it          | 1900-01-01 00:00:01 | NULL |

| 11 | res.voceblu.it             | 1900-01-01 00:00:01 | NULL |

| 12 | via-bolletta.telefonica.it | 1900-01-01 00:00:01 | NULL |

| 13 | centrale03.avanzati.it     | 1900-01-01 00:00:01 | NULL |

+----+----------------------------+---------------------+------+

*8 rows in set (0.02 sec)*



centrale03:~# ngcp-kamctl proxy fifo domain_dump

domain:: sipd.bandablu.com

did:: sipd.bandablu.com

domain:: voip.sipwise.local

did:: voip.sipwise.local

domain:: via-bolletta.telefonica.it

did:: via-bolletta.telefonica.it

domain:: centrale03.avanzati.it

did:: centrale03.avanzati.it

domain:: res.voceblu.it

did:: res.voceblu.it

domain:: d.voceblu.it

did:: d.voceblu.it

domain:: c.voceblu.it

did:: c.voceblu.it

domain:: netgen.voceblu.it

did:: netgen.voceblu.it


Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

select * from kamailio.domain;
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/03215d45/attachment-0001.html>

From dgrotti at sipwise.com  Mon Nov  6 06:05:00 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 12:05:00 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
Message-ID: <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>

Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062 
(proxy).
Thanks


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 11:56 AM, stefanormc wrote:
> Great tool!
>
> *?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by 
> Request/Response)*
>
> ?*INVITE**sip:centrale03.avanzati.it 
> <http://centrale03.avanzati.it>*SIP/2.0
>
> 178.255.188.147:42652 
> <http://178.255.188.147:42652>*94.125.235.56:5060 
> <http://94.125.235.56:5060>**127.0.0.1:5060 
> <http://127.0.0.1:5060>**127.0.0.1:5062 <http://127.0.0.1:5062>* 
> ?Via:SIP/2.0/UDP 
> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>
> ?????????????????????????????????????????????????????????????????????????????????0f185f8
>
> ? *? INVITE (SDP) *????From:<sip:0119084086 at c.voceblu.it 
> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>
> *11:44:32.102554* ? ? 
> *??????????????????????????>*????To:<sip:3482209875 at c.voceblu.it 
> <mailto:sip%3A3482209875 at c.voceblu.it>>
>
> +0.000462? ??? INVITE (SDP) 
> ??Contact:<sip:0119084086 at 192.168.192.50:5070 
> <http://sip:0119084086 at 192.168.192.50:5070>>
>
> 11:44:32.103016 ? ??? 
> ??????????????????????????>??Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>
> +0.000214? ??? ? ? ? 100 Trying ??CSeq:20617 INVITE
>
> 11:44:32.103230 ? ??? <????????????????????????????Allow:OPTIONS, 
> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>
> +0.000176? ??? 403 Initial Loose-Routing ??ISTER, REFER, MESSAGE
>
> 11:44:32.103406 ? ??? <????????????????????????????Supported:100rel, 
> timer, replaces, norefersub
>
> +0.000194? ? ? ? ? 100 Trying ????Session-Expires:1800
>
> 11:44:32.103600 ? ? <??????????????????????????????Min-SE:90
>
> +0.000060? ? 403 Initial Loose-Routing 
> ????P-Asserted-Identity:<sip:112 at galilei.local>
>
> 11:44:32.103660 ? ? 
> <??????????????????????????????P-Preferred-Identity:<sip:112 at galilei.local>
>
> +0.010267? ? ? ? ? ? ? ACK ????Route:<sip:3482209875 at c.voceblu.it 
> <mailto:sip%3A3482209875 at c.voceblu.it>>
>
> 11:44:32.113927 ? ? ??????????????????????????>????Max-Forwards:70
>
> +0.000254? ??? ? ? ? ? ? ACK ??User-Agent:Gigaset T440/T640
>
> 11:44:32.114181 ? ??? 
> ??????????????????????????>??Content-Type:application/sdp
>
> ?????Content-Length:? 239
>
> ?????
>
> ?????v=0
>
> ?????o=- 370697073 370697073 IN IP4 192.168.192.50
>
> ?????s=Asterisk
>
> ?????c=IN IP4 192.168.192.50
>
> ?????t=0 0
>
> ?????m=audio 12360 RTP/AVP 0 101
>
> ?????a=rtpmap:0 PCMU/8000
>
> ?????a=rtpmap:101 telephone-event/8000
>
> ?????a=fmtp:101 0-16
>
> ?????a=ptime:20
>
> ?????a=maxptime:150
>
> ?????a=sendrecv
>
> ?????
>
> ?????
>
> ?????
>
>
> can it be the p-asserted-identity the problem? I see is the PBX 
> endpoint instead of the sipwise account
>
>
>
>
> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti 
> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>
>> mmm...so the problem could be in the $du variable.
>> Since loose_route() return TRUE, it means that the INVITE contains a 
>> Route header.
>>
>> Can you take a trace of such call (with sngrep for example) and paste 
>> here the INVITE you receive from this UA ?
>>
>>
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email:dgrotti at sipwise.com
>> Website:https://www.sipwise.com
>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>
>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>
>>> +----+----------------------------+---------------------+------+
>>>
>>> | id | domain ? ? | last_modified ? ? ? | did |
>>>
>>> +----+----------------------------+---------------------+------+
>>>
>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>
>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
>>> 1900-01-01 00:00:01 | NULL |
>>>
>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? | 1900-01-01 00:00:01 | 
>>> NULL |
>>>
>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? | 1900-01-01 00:00:01 | 
>>> NULL |
>>>
>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
>>> 1900-01-01 00:00:01 | NULL |
>>>
>>> | 11 | res.voceblu.it <http://res.voceblu.it> | 1900-01-01 00:00:01 
>>> | NULL |
>>>
>>> | 12 | via-bolletta.telefonica.it 
>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>
>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? | 
>>> 1900-01-01 00:00:01 | NULL |
>>>
>>> +----+----------------------------+---------------------+------+
>>>
>>> *8 rows in set (0.02 sec)*
>>>
>>> *
>>> *
>>> *
>>> *
>>> *
>>> *
>>>
>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>
>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>
>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>
>>> domain:: voip.sipwise.local
>>>
>>> did:: voip.sipwise.local
>>>
>>> domain:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>
>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>
>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>
>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>
>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>
>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>
>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>
>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>
>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>
>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>
>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>
>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>
>>>
>>>
>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>
>>>> select * from kamailio.domain;
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/75a78362/attachment-0001.html>

From dgrotti at sipwise.com  Mon Nov  6 06:06:37 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 12:06:37 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
 <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
Message-ID: <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>

Or better to send me the entire pcap (you can use my email if you don't 
want to share data).

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 12:05 PM, Daniel Grotti wrote:
> Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062 
> (proxy).
> Thanks
>
>
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email:dgrotti at sipwise.com
> Website:https://www.sipwise.com
> On 11/06/2017 11:56 AM, stefanormc wrote:
>> Great tool!
>>
>> *? ? ?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by 
>> Request/Response)*
>>
>> ?*INVITE**sip:centrale03.avanzati.it 
>> <http://centrale03.avanzati.it>*SIP/2.0
>>
>> 178.255.188.147:42652 
>> <http://178.255.188.147:42652>*94.125.235.56:5060 
>> <http://94.125.235.56:5060>**127.0.0.1:5060 
>> <http://127.0.0.1:5060>**127.0.0.1:5062 <http://127.0.0.1:5062>* 
>> ?Via:SIP/2.0/UDP 
>> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>>
>> ?????????????????????????????????????????????????????????????????????????????????0f185f8
>>
>> ? *? INVITE (SDP) *????From:<sip:0119084086 at c.voceblu.it 
>> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>>
>> *11:44:32.102554* ? ? 
>> *??????????????????????????>*????To:<sip:3482209875 at c.voceblu.it 
>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>
>> +0.000462? ??? INVITE (SDP) 
>> ??Contact:<sip:0119084086 at 192.168.192.50:5070 
>> <http://sip:0119084086 at 192.168.192.50:5070>>
>>
>> 11:44:32.103016 ? ??? 
>> ??????????????????????????>??Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>>
>> +0.000214? ??? ? ? ? 100 Trying ??CSeq:20617 INVITE
>>
>> 11:44:32.103230 ? ??? <????????????????????????????Allow:OPTIONS, 
>> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>>
>> +0.000176? ??? 403 Initial Loose-Routing ??ISTER, REFER, MESSAGE
>>
>> 11:44:32.103406 ? ??? <????????????????????????????Supported:100rel, 
>> timer, replaces, norefersub
>>
>> +0.000194? ? ? ? ? 100 Trying ????Session-Expires:1800
>>
>> 11:44:32.103600 ? ? <??????????????????????????????Min-SE:90
>>
>> +0.000060? ? 403 Initial Loose-Routing 
>> ????P-Asserted-Identity:<sip:112 at galilei.local>
>>
>> 11:44:32.103660 ? ? 
>> <??????????????????????????????P-Preferred-Identity:<sip:112 at galilei.local>
>>
>> +0.010267? ? ? ? ? ? ? ACK ????Route:<sip:3482209875 at c.voceblu.it 
>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>
>> 11:44:32.113927 ? ? ??????????????????????????>????Max-Forwards:70
>>
>> +0.000254? ??? ? ? ? ? ? ACK ??User-Agent:Gigaset T440/T640
>>
>> 11:44:32.114181 ? ??? 
>> ??????????????????????????>??Content-Type:application/sdp
>>
>> ?????Content-Length:? 239
>>
>> ?????
>>
>> ?????v=0
>>
>> ?????o=- 370697073 370697073 IN IP4 192.168.192.50
>>
>> ?????s=Asterisk
>>
>> ?????c=IN IP4 192.168.192.50
>>
>> ?????t=0 0
>>
>> ?????m=audio 12360 RTP/AVP 0 101
>>
>> ?????a=rtpmap:0 PCMU/8000
>>
>> ?????a=rtpmap:101 telephone-event/8000
>>
>> ?????a=fmtp:101 0-16
>>
>> ?????a=ptime:20
>>
>> ?????a=maxptime:150
>>
>> ?????a=sendrecv
>>
>> ?????
>>
>> ?????
>>
>> ?????
>>
>>
>> can it be the p-asserted-identity the problem? I see is the PBX 
>> endpoint instead of the sipwise account
>>
>>
>>
>>
>> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti 
>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>
>>> mmm...so the problem could be in the $du variable.
>>> Since loose_route() return TRUE, it means that the INVITE contains a 
>>> Route header.
>>>
>>> Can you take a trace of such call (with sngrep for example) and 
>>> paste here the INVITE you receive from this UA ?
>>>
>>>
>>> --
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email:dgrotti at sipwise.com
>>> Website:https://www.sipwise.com
>>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>>
>>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>>
>>>> +----+----------------------------+---------------------+------+
>>>>
>>>> | id | domain ? ? ? ? ? ? | last_modified ? ? ? | did? |
>>>>
>>>> +----+----------------------------+---------------------+------+
>>>>
>>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>>
>>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? | 1900-01-01 
>>>> 00:00:01 | NULL |
>>>>
>>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? | 1900-01-01 
>>>> 00:00:01 | NULL |
>>>>
>>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> | 12 | via-bolletta.telefonica.it 
>>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>>
>>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? | 
>>>> 1900-01-01 00:00:01 | NULL |
>>>>
>>>> +----+----------------------------+---------------------+------+
>>>>
>>>> *8 rows in set (0.02 sec)*
>>>>
>>>> *
>>>> *
>>>> *
>>>> *
>>>> *
>>>> *
>>>>
>>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>>
>>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>
>>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>
>>>> domain:: voip.sipwise.local
>>>>
>>>> did:: voip.sipwise.local
>>>>
>>>> domain:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>
>>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>
>>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>
>>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>
>>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>>
>>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>>
>>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>>
>>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>>
>>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>>
>>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>>
>>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>
>>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>
>>>>
>>>>
>>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>
>>>>> select * from kamailio.domain;
>>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/dd1ec86c/attachment-0001.html>

From dgrotti at sipwise.com  Mon Nov  6 11:00:46 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Mon, 6 Nov 2017 17:00:46 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
 <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
 <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>
Message-ID: <c400d1ba-9343-026e-19b7-af8c0818694e@sipwise.com>

Hi Stefano,
the INVITE the Gigaset is sending is quite weird, never seen this before.
RURI contains the Proxy domain, and conaints a ROUTE header with the 
number to call:

INVITE sip:centrale03.avanzati.it SIP/2.0
Via: SIP/2.0/UDP 
192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8 

From: 
<sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
To: <sip:3482209875 at c.voceblu.it>
Contact: <sip:0119084086 at 192.168.192.50:5070>
Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
CSeq: 20617 INVITE
Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, 
UPDATE, PRACK, REGISTER, REFER, MESSAGE
Supported: 100rel, timer, replaces, norefersub
Session-Expires: 1800
Min-SE: 90
P-Asserted-Identity: <sip:112 at galilei.local>
P-Preferred-Identity: <sip:112 at galilei.local>
Route: <sip:3482209875 at c.voceblu.it>
Max-Forwards: 70
User-Agent: Gigaset T440/T640
Content-Type: application/sdp
Content-Length:?? 239


Also, what is strange is that the INVITE from LB to PROXY looks lile:


INVITE sip:3482209875 at c.voceblu.it SIP/2.0
Record-Route: 
<sip:127.0.0.1;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060> 

Record-Route: 
<sip:94.125.235.56;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060> 

Via: SIP/2.0/UDP 
127.0.0.1;branch=z9hG4bK574d.ba877c02a02cf37c79ee52087c29a8d0.0
Via: SIP/2.0/UDP 
192.168.192.50:5070;received=178.255.188.147;rport=42652;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8 

From: 
<sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
To: <sip:3482209875 at c.voceblu.it>
Contact: <sip:0119084086 at 192.168.192.50:5070;alias=178.255.188.147~42652~1>
Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
CSeq: 20617 INVITE
Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, 
UPDATE, PRACK, REGISTER, MESSAGE
Supported: 100rel, timer, replaces, norefersub
Session-Expires: 1800
Min-SE: 90
P-Asserted-Identity: <sip:112 at galilei.local>
P-Preferred-Identity: <sip:112 at galilei.local>
Max-Forwards: 69
User-Agent: Gigaset T440/T640
Content-Type: application/sdp
Content-Length:?? 269
P-NGCP-Src-Ip: 178.255.188.147
P-NGCP-Src-Port: 42652
P-NGCP-Src-Proto: udp
P-NGCP-Src-Af: 4
P-Sock-Info: udp:94.125.235.56:5060
P-NGCP-Src-Nat: 1
Route: <sip:centrale03.avanzati.it>


And this is also weird, cause it contains a ROUTE header, that should 
not be there.

Which version are you using ?
Do you have kamailo customtt in place ?


I would recommend to check your UA configuration, cause the first invite 
with that RURI and the Route header looks very strange, that should not 
the way to initiate a SIP session. INVITE's R-URI should contains 
sip:<number_called>@<sip_domain>, and usually no route header, or if 
any, they should contain the IP/domain of your NGCP.



-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/06/2017 12:06 PM, Daniel Grotti wrote:
> Or better to send me the entire pcap (you can use my email if you 
> don't want to share data).
>
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email:dgrotti at sipwise.com
> Website:https://www.sipwise.com
> On 11/06/2017 12:05 PM, Daniel Grotti wrote:
>> Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062 
>> (proxy).
>> Thanks
>>
>>
>> -- 
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email:dgrotti at sipwise.com
>> Website:https://www.sipwise.com
>> On 11/06/2017 11:56 AM, stefanormc wrote:
>>> Great tool!
>>>
>>> *? ? ? ? ?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color 
>>> by Request/Response)*
>>>
>>> ?*INVITE**sip:centrale03.avanzati.it 
>>> <http://centrale03.avanzati.it>*SIP/2.0
>>>
>>> 178.255.188.147:42652 
>>> <http://178.255.188.147:42652>*94.125.235.56:5060 
>>> <http://94.125.235.56:5060>**127.0.0.1:5060 
>>> <http://127.0.0.1:5060>**127.0.0.1:5062 <http://127.0.0.1:5062>* 
>>> ?Via:SIP/2.0/UDP 
>>> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>>>
>>> ?????????????????????????????????????????????????????????????????????????????????0f185f8
>>>
>>> ? *? INVITE (SDP) *????From:<sip:0119084086 at c.voceblu.it 
>>> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>>>
>>> *11:44:32.102554* ? ? 
>>> *??????????????????????????>*????To:<sip:3482209875 at c.voceblu.it 
>>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>
>>> +0.000462? ??? INVITE (SDP) 
>>> ??Contact:<sip:0119084086 at 192.168.192.50:5070 
>>> <http://sip:0119084086 at 192.168.192.50:5070>>
>>>
>>> 11:44:32.103016 ? ??? 
>>> ??????????????????????????>??Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>>>
>>> +0.000214? ??? ? ? ? 100 Trying ??CSeq:20617 INVITE
>>>
>>> 11:44:32.103230 ? ??? <????????????????????????????Allow:OPTIONS, 
>>> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>>>
>>> +0.000176? ??? 403 Initial Loose-Routing ??ISTER, REFER, MESSAGE
>>>
>>> 11:44:32.103406 ? ??? <????????????????????????????Supported:100rel, 
>>> timer, replaces, norefersub
>>>
>>> +0.000194? ? ? ? ? 100 Trying ????Session-Expires:1800
>>>
>>> 11:44:32.103600 ? ? <??????????????????????????????Min-SE:90
>>>
>>> +0.000060? ? 403 Initial Loose-Routing 
>>> ????P-Asserted-Identity:<sip:112 at galilei.local>
>>>
>>> 11:44:32.103660 ? ? 
>>> <??????????????????????????????P-Preferred-Identity:<sip:112 at galilei.local>
>>>
>>> +0.010267? ? ? ? ? ? ? ACK ????Route:<sip:3482209875 at c.voceblu.it 
>>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>
>>> 11:44:32.113927 ? ? ??????????????????????????>????Max-Forwards:70
>>>
>>> +0.000254? ??? ? ? ? ? ? ACK ??User-Agent:Gigaset T440/T640
>>>
>>> 11:44:32.114181 ? ??? 
>>> ??????????????????????????>??Content-Type:application/sdp
>>>
>>> ?????Content-Length:? 239
>>>
>>> ?????
>>>
>>> ?????v=0
>>>
>>> ?????o=- 370697073 370697073 IN IP4 192.168.192.50
>>>
>>> ?????s=Asterisk
>>>
>>> ?????c=IN IP4 192.168.192.50
>>>
>>> ?????t=0 0
>>>
>>> ?????m=audio 12360 RTP/AVP 0 101
>>>
>>> ?????a=rtpmap:0 PCMU/8000
>>>
>>> ?????a=rtpmap:101 telephone-event/8000
>>>
>>> ?????a=fmtp:101 0-16
>>>
>>> ?????a=ptime:20
>>>
>>> ?????a=maxptime:150
>>>
>>> ?????a=sendrecv
>>>
>>> ?????
>>>
>>> ?????
>>>
>>> ?????
>>>
>>>
>>> can it be the p-asserted-identity the problem? I see is the PBX 
>>> endpoint instead of the sipwise account
>>>
>>>
>>>
>>>
>>> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti 
>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>
>>>> mmm...so the problem could be in the $du variable.
>>>> Since loose_route() return TRUE, it means that the INVITE contains 
>>>> a Route header.
>>>>
>>>> Can you take a trace of such call (with sngrep for example) and 
>>>> paste here the INVITE you receive from this UA ?
>>>>
>>>>
>>>> --
>>>> Daniel Grotti
>>>> Head of Customer Support
>>>> Sipwise GmbH, Campus 21/Europaring F15
>>>> AT-2345 Brunn am Gebirge
>>>>
>>>> Office: +43(0)130120332
>>>> Email:dgrotti at sipwise.com
>>>> Website:https://www.sipwise.com
>>>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>>>
>>>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>>>
>>>>> +----+----------------------------+---------------------+------+
>>>>>
>>>>> | id | domain ? ? ? ? ? ? | last_modified ? ? ? | did? |
>>>>>
>>>>> +----+----------------------------+---------------------+------+
>>>>>
>>>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com> ? ? ? ? | 
>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? ? | 1900-01-01 
>>>>> 00:00:01 | NULL |
>>>>>
>>>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? ? | 1900-01-01 
>>>>> 00:00:01 | NULL |
>>>>>
>>>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it> ? ? ? ? | 
>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? ? | 
>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> | 12 | via-bolletta.telefonica.it 
>>>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ? 
>>>>> | 1900-01-01 00:00:01 | NULL |
>>>>>
>>>>> +----+----------------------------+---------------------+------+
>>>>>
>>>>> *8 rows in set (0.02 sec)*
>>>>>
>>>>> *
>>>>> *
>>>>> *
>>>>> *
>>>>> *
>>>>> *
>>>>>
>>>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>>>
>>>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>
>>>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>
>>>>> domain:: voip.sipwise.local
>>>>>
>>>>> did:: voip.sipwise.local
>>>>>
>>>>> domain:: via-bolletta.telefonica.it 
>>>>> <http://via-bolletta.telefonica.it>
>>>>>
>>>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>>
>>>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>
>>>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>
>>>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>>>
>>>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>>>
>>>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>>>
>>>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>>>
>>>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>>>
>>>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>>>
>>>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>
>>>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>
>>>>>
>>>>>
>>>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti 
>>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>>
>>>>>> select * from kamailio.domain;
>>>>
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/864d732e/attachment-0001.html>

From ascanio.alba7 at gmail.com  Tue Nov  7 03:55:39 2017
From: ascanio.alba7 at gmail.com (Anthony Alba)
Date: Tue, 7 Nov 2017 16:55:39 +0800
Subject: [Spce-user] rtpengine: is there a timeout for one-sided no RTP
	traffic?
Message-ID: <CADkWibeCS0edJWUkuvDXTsgZ03izBSsr_pSQNh8J_Mr7uexOLA@mail.gmail.com>

Trying to understand timeouts here:

If I have one UA disappearing (no RTP packets, no graceful delete from
SIP proxy) but the other side still sending RTP, will rtpengine
timeout?

--silent-timeout: Ditto as the --timeout option, but applies to muted
or inactive media streams. Defaults to 3600 (one hour).

Does this apply to a UA who has crashed? (Say one side is still
sending RTP and thinks the call is up...but the other UA has
disappeared.)

Thanks

Anthony


From agranig at sipwise.com  Tue Nov  7 04:22:54 2017
From: agranig at sipwise.com (Andreas Granig)
Date: Tue, 7 Nov 2017 10:22:54 +0100
Subject: [Spce-user] loose-routing
In-Reply-To: <c400d1ba-9343-026e-19b7-af8c0818694e@sipwise.com>
References: <CAHTRqyUFY-3mEaeuOxUiekNvMowLzqt0KZPq6W6Z2jzKjR-pug@mail.gmail.com>
 <CAHTRqyVh1Y2enYqOriTo=XXFCpSTpnbRBqp1nAJEZudjVB89PQ@mail.gmail.com>
 <953f14c4-74d1-7e60-5e0a-bd8d9655ad7d@voipdigit.nl>
 <CAHTRqyWwqfH3iTAp_OB8v6BMY2dzb9=QEcwudpRdNru+1T1-ng@mail.gmail.com>
 <38646665-544a-690e-41f6-c0df13029d51@voipdigit.nl>
 <2a8da2c0-bfee-79d6-4e90-33cea866d56f@sipwise.com>
 <CAHTRqyUh5mbxuMSyDRfpPoy-So9TAJptbnGZYt+M1jF1DQ5g=g@mail.gmail.com>
 <CAHTRqyVJpDMB39vLUSPBr_7QiuL9rjF3RybhcjutOpnb=7BVXg@mail.gmail.com>
 <754ce2e9-8924-3f2e-80a5-4a074ae4d26a@sipwise.com>
 <CAHTRqyUAV=QajiorAVz=C1AH7PikPR59ibLnKxOTby4Hsphyvw@mail.gmail.com>
 <d6eae727-cf95-216c-0d86-97fbb0ebd1e9@sipwise.com>
 <CAHTRqyWHuh9PrmFYoi-0y+DtZZ85dCYyA09FTg_MS9PzQx-8Ag@mail.gmail.com>
 <8c8a1f5e-7676-ce71-e6a0-926db8f700ed@sipwise.com>
 <e864e7c5-7694-a42a-f680-4ac23dbc4f6e@sipwise.com>
 <c400d1ba-9343-026e-19b7-af8c0818694e@sipwise.com>
Message-ID: <8184c4ca-1b5a-1538-9746-cc24a156d1f6@sipwise.com>

Hi,

In general, I'd say it WOULD work fine, if the Route header at least had
the "lr" flag set. That is, it would need to indicate loose-routing and
look like this:

Route: <sip:3482209875 at c.voceblu.it;lr>

Since this param is missing, it expects the next hop to be a strict
router and inserts the previously set R-URI sip:centrale03.avanzati.it
into another Route once again.

I played a bit with this and managed to get it working, however there is
NO GUARANTEE WHATSOEVER that this is going to cause any security issues
or side effects in routing or billing or anything else. I've just tested
if the proxy is continuing to process the call instead of getting
rejected due to loose-routing restrictions. Having said that, here you
go, there is the patch:

########################
--- /etc/ngcp-config/templates/etc/kamailio/proxy/proxy.cfg.tt2
2017-11-07 10:06:34.939673459 +0100
+++ /etc/ngcp-config/templates/etc/kamailio/proxy/proxy.cfg.customtt.tt2
2017-11-07 10:18:30.748835620 +0100
@@ -105,6 +105,7 @@

 	$(avp(s:first_caller_ipv46_for_rtpproxy)[*]) = $null;

+	$var(ruri_before_loose) = $ru;
 	if(loose_route())
 	{
 		if(check_route_param("rtpprx=yes") || $dlg_var(rtpprx) == "1")
@@ -125,7 +126,13 @@
 		}
 		if(!has_totag())
 		{
-			if($du != $null && is_domain_local("$dd"))
+			if($du == $null && $rU == $null &&
+			   is_domain_local("$rd") &&
is_domain_local("$(var(ruri_before_loose){nameaddr.uri}{uri.host})"))
+			{
+				xlog("L_NOTICE", "HACK: restore strict routed request - [% logreq
-%]\n");
+				$ru = $var(ruri_before_loose);
+			}
+			else if($du != $null && is_domain_local("$dd"))
 			{
 				xlog("L_INFO", "Reset initial local route - [% logreq -%]\n");
 				$du = $null;
########################

So, what it does is checking within loose_route() whether $du is null
(which on a loose-routed request shouldn't be the case) and if the
resulting request-uri has no user-part (because it's set to
"sip:centrale03.avanzati.it" by kamailio after loose_route), and if the
domain part of the request uri is in your domains list (which is true if
you have centrale03.avanzati.it created as a domain in the panel).
Finally it also checks if the original request uri (which we're about to
restore and continue to work with) is also in your domains list (which
is true if you also have c.voceblu.it created as domain in the panel).

If all of this is the case, it takes the previously set request uri (the
one being there in the original Route header) and takes that to continue
routing.

I'm not confident whether this is the correct behavior of a proxy in
general for these types of requests, but it looks strict and reasonable
enough. Anyways, use at own risk.


Andreas


On 11/06/2017 05:00 PM, Daniel Grotti wrote:
> Hi Stefano,
> the INVITE the Gigaset is sending is quite weird, never seen this before.
> RURI contains the Proxy domain, and conaints a ROUTE header with the
> number to call:
> 
> INVITE sip:centrale03.avanzati.it SIP/2.0
> Via: SIP/2.0/UDP
> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8
> 
> From:
> <sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
> To: <sip:3482209875 at c.voceblu.it>
> Contact: <sip:0119084086 at 192.168.192.50:5070>
> Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
> CSeq: 20617 INVITE
> Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL,
> UPDATE, PRACK, REGISTER, REFER, MESSAGE
> Supported: 100rel, timer, replaces, norefersub
> Session-Expires: 1800
> Min-SE: 90
> P-Asserted-Identity: <sip:112 at galilei.local>
> P-Preferred-Identity: <sip:112 at galilei.local>
> Route: <sip:3482209875 at c.voceblu.it>
> Max-Forwards: 70
> User-Agent: Gigaset T440/T640
> Content-Type: application/sdp
> Content-Length:?? 239
> ?
> 
> Also, what is strange is that the INVITE from LB to PROXY looks lile:
> 
> 
> INVITE sip:3482209875 at c.voceblu.it SIP/2.0
> Record-Route:
> <sip:127.0.0.1;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060>
> 
> Record-Route:
> <sip:94.125.235.56;r2=on;lr=on;ftag=d8629edc-773b-4100-97b6-27d2dcc4e417;nat=yes;ngcplb=yes;socket=udp:94.125.235.56:5060>
> 
> Via: SIP/2.0/UDP
> 127.0.0.1;branch=z9hG4bK574d.ba877c02a02cf37c79ee52087c29a8d0.0
> Via: SIP/2.0/UDP
> 192.168.192.50:5070;received=178.255.188.147;rport=42652;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13110f185f8
> 
> From:
> <sip:0119084086 at c.voceblu.it>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
> To: <sip:3482209875 at c.voceblu.it>
> Contact: <sip:0119084086 at 192.168.192.50:5070;alias=178.255.188.147~42652~1>
> Call-ID: 4ae7566c-c8ab-4b29-9950-d6829953f085
> CSeq: 20617 INVITE
> Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL,
> UPDATE, PRACK, REGISTER, MESSAGE
> Supported: 100rel, timer, replaces, norefersub
> Session-Expires: 1800
> Min-SE: 90
> P-Asserted-Identity: <sip:112 at galilei.local>
> P-Preferred-Identity: <sip:112 at galilei.local>
> Max-Forwards: 69
> User-Agent: Gigaset T440/T640
> Content-Type: application/sdp
> Content-Length:?? 269
> P-NGCP-Src-Ip: 178.255.188.147
> P-NGCP-Src-Port: 42652
> P-NGCP-Src-Proto: udp
> P-NGCP-Src-Af: 4
> P-Sock-Info: udp:94.125.235.56:5060
> P-NGCP-Src-Nat: 1
> Route: <sip:centrale03.avanzati.it>
> ?
> 
> And this is also weird, cause it contains a ROUTE header, that should
> not be there.
> 
> Which version are you using ?
> Do you have kamailo customtt in place ?
> 
> 
> I would recommend to check your UA configuration, cause the first invite
> with that RURI and the Route header looks very strange, that should not
> the way to initiate a SIP session. INVITE's R-URI should contains
> sip:<number_called>@<sip_domain>, and usually no route header, or if
> any, they should contain the IP/domain of your NGCP.
> 
> 
> 
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
> 
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
> 
> On 11/06/2017 12:06 PM, Daniel Grotti wrote:
>> Or better to send me the entire pcap (you can use my email if you
>> don't want to share data).
>>
>> -- 
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>> On 11/06/2017 12:05 PM, Daniel Grotti wrote:
>>> Please show me the INIVTE from 127.0.0.1:5060 (lb) to 127.0.0.1:5062
>>> (proxy).
>>> Thanks
>>>
>>>
>>> -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com
>>> Website: https://www.sipwise.com
>>> On 11/06/2017 11:56 AM, stefanormc wrote:
>>>> Great tool!
>>>>
>>>> *? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>>>> ?Call flow for 4ae7566c-c8ab-4b29-9950-d6829953f085 (Color by
>>>> Request/Response)*
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
>>>> ?*INVITE**sip:centrale03.avanzati.it
>>>> <http://centrale03.avanzati.it>*SIP/2.0
>>>>
>>>> ? ? ? ? ? 178.255.188.147:42652 <http://178.255.188.147:42652>? ? ?
>>>> ? ? *94.125.235.56:5060 <http://94.125.235.56:5060>*? ? ? ? ? ? ?
>>>> *127.0.0.1:5060 <http://127.0.0.1:5060>*? ? ? ? ? ? ? ?
>>>> *127.0.0.1:5062 <http://127.0.0.1:5062>*? ?Via:SIP/2.0/UDP
>>>> 192.168.192.50:5070;rport;branch=z9hG4bKPjb90130da-94b5-46f2-9fa0-e13
>>>>
>>>> ? ? ? ? ? ????????????????????? ? ? ? ? ????????????????????? ? ? ?
>>>> ? ????????????????????? ? ? ? ? ?????????????????????0f185f8
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ??*? ? ? INVITE (SDP) ? ? ? ?*?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?From:<sip:0119084086 at c.voceblu.it
>>>> <mailto:sip%3A0119084086 at c.voceblu.it>>;tag=d8629edc-773b-4100-97b6-27d2dcc4e417
>>>>
>>>> ? *11:44:32.102554* ? ? *??????????????????????????>*?? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?To:<sip:3482209875 at c.voceblu.it <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>>
>>>> ? ? ? ? +0.000462? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ??? ? ? INVITE (SDP) ? ? ? ??? ? ? ?
>>>> ?Contact:<sip:0119084086 at 192.168.192.50:5070
>>>> <http://sip:0119084086 at 192.168.192.50:5070>>
>>>>
>>>> ? 11:44:32.103016 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ??????????????????????????>?? ? ? ?
>>>> ?Call-ID:*4ae7566c-c8ab-4b29-9950-d6829953f085*
>>>>
>>>> ? ? ? ? +0.000214? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ? ? 100 Trying? ? ? ? ??? ? ? ? ?CSeq:20617 INVITE
>>>>
>>>> ? 11:44:32.103230 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? <???????????????????????????? ? ? ? ?Allow:OPTIONS,
>>>> SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, R
>>>>
>>>> ? ? ? ? +0.000176? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ??403 Initial Loose-Routing??? ? ? ? ?ISTER, REFER, MESSAGE
>>>>
>>>> ? 11:44:32.103406 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? <???????????????????????????? ? ? ? ?Supported:100rel,
>>>> timer, replaces, norefersub
>>>>
>>>> ? ? ? ? +0.000194? ? ? ? ? ? 100 Trying? ? ? ? ??? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Session-Expires:1800
>>>>
>>>> ? 11:44:32.103600 ? ? <???????????????????????????? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Min-SE:90
>>>>
>>>> ? ? ? ? +0.000060? ??403 Initial Loose-Routing??? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?P-Asserted-Identity:<sip:112 at galilei.local>
>>>>
>>>> ? 11:44:32.103660 ? ? <???????????????????????????? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?P-Preferred-Identity:<sip:112 at galilei.local>
>>>>
>>>> ? ? ? ? +0.010267? ? ? ? ? ? ? ? ACK ? ? ? ? ? ??? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ?
>>>> ?Route:<sip:3482209875 at c.voceblu.it
>>>> <mailto:sip%3A3482209875 at c.voceblu.it>>
>>>>
>>>> ? 11:44:32.113927 ? ? ??????????????????????????>?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Max-Forwards:70
>>>>
>>>> ? ? ? ? +0.000254? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ? ? ? ? ? ACK ? ? ? ? ? ??? ? ? ? ?User-Agent:Gigaset
>>>> T440/T640
>>>>
>>>> ? 11:44:32.114181 ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ? ??????????????????????????>?? ? ? ?
>>>> ?Content-Type:application/sdp
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?Content-Length:? 239
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?v=0
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?o=- 370697073
>>>> 370697073 IN IP4 192.168.192.50
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?s=Asterisk
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?c=IN IP4 192.168.192.50
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?t=0 0
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?m=audio 12360
>>>> RTP/AVP 0 101
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=rtpmap:0 PCMU/8000
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=rtpmap:101
>>>> telephone-event/8000
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=fmtp:101 0-16
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=ptime:20
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=maxptime:150
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?a=sendrecv
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>> ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ? ? ? ? ?
>>>> ? ? ? ? ? ?? ? ? ? ? ? ? ? ? ? ? ? ? ? ?? ? ? ? ?
>>>>
>>>>
>>>> can it be the p-asserted-identity the problem? I see is the PBX
>>>> endpoint instead of the sipwise account?
>>>>
>>>>
>>>>
>>>>
>>>> Il giorno 6 novembre 2017 @ 11:34:13, Daniel Grotti
>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>
>>>>> mmm...so the problem could be in the $du variable.
>>>>> Since loose_route() return TRUE, it means that the INVITE contains
>>>>> a Route header.
>>>>>
>>>>> Can you take a trace of such call (with sngrep for example) and
>>>>> paste here the INVITE you receive from this UA ?
>>>>>
>>>>>
>>>>> --  
>>>>> Daniel Grotti
>>>>> Head of Customer Support
>>>>> Sipwise GmbH, Campus 21/Europaring F15
>>>>> AT-2345 Brunn am Gebirge
>>>>>
>>>>> Office: +43(0)130120332
>>>>> Email: dgrotti at sipwise.com
>>>>> Website: https://www.sipwise.com
>>>>> On 11/06/2017 11:24 AM, stefanormc wrote:
>>>>>>
>>>>>> MariaDB [ngcp]> select * from kamailio.domain;
>>>>>>
>>>>>> +----+----------------------------+---------------------+------+
>>>>>>
>>>>>> | id | domain ? ? ? ? ? ? ? ? ? ? | last_modified ? ? ? | did? |
>>>>>>
>>>>>> +----+----------------------------+---------------------+------+
>>>>>>
>>>>>> |? 1 | voip.sipwise.local ? ? ? ? | 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 2 | sipd.bandablu.com <http://sipd.bandablu.com>? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 3 | d.voceblu.it <http://d.voceblu.it> ? ? ? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 5 | c.voceblu.it <http://c.voceblu.it> ? ? ? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> |? 8 | netgen.voceblu.it <http://netgen.voceblu.it>? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> | 11 | res.voceblu.it <http://res.voceblu.it> ? ? ? ? ? ? |
>>>>>> 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> | 12 | via-bolletta.telefonica.it
>>>>>> <http://via-bolletta.telefonica.it> | 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> | 13 | centrale03.avanzati.it <http://centrale03.avanzati.it> ? ?
>>>>>> | 1900-01-01 00:00:01 | NULL |
>>>>>>
>>>>>> +----+----------------------------+---------------------+------+
>>>>>>
>>>>>> *8 rows in set (0.02 sec)*
>>>>>>
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>> *
>>>>>>
>>>>>> centrale03:~# ngcp-kamctl proxy fifo domain_dump
>>>>>>
>>>>>> domain:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>>
>>>>>> did:: sipd.bandablu.com <http://sipd.bandablu.com>
>>>>>>
>>>>>> domain:: voip.sipwise.local
>>>>>>
>>>>>> did:: voip.sipwise.local
>>>>>>
>>>>>> domain:: via-bolletta.telefonica.it
>>>>>> <http://via-bolletta.telefonica.it>
>>>>>>
>>>>>> did:: via-bolletta.telefonica.it <http://via-bolletta.telefonica.it>
>>>>>>
>>>>>> domain:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>>
>>>>>> did:: centrale03.avanzati.it <http://centrale03.avanzati.it>
>>>>>>
>>>>>> domain:: res.voceblu.it <http://res.voceblu.it>
>>>>>>
>>>>>> did:: res.voceblu.it <http://res.voceblu.it>
>>>>>>
>>>>>> domain:: d.voceblu.it <http://d.voceblu.it>
>>>>>>
>>>>>> did:: d.voceblu.it <http://d.voceblu.it>
>>>>>>
>>>>>> domain:: c.voceblu.it <http://c.voceblu.it>
>>>>>>
>>>>>> did:: c.voceblu.it <http://c.voceblu.it>
>>>>>>
>>>>>> domain:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>>
>>>>>> did:: netgen.voceblu.it <http://netgen.voceblu.it>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Il giorno 6 novembre 2017 @ 11:18:40, Daniel Grotti
>>>>>> (dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>) ha scritto:
>>>>>>
>>>>>>> select * from kamailio.domain;
>>>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
> 


From rfuchs at sipwise.com  Tue Nov  7 17:40:56 2017
From: rfuchs at sipwise.com (Richard Fuchs)
Date: Tue, 7 Nov 2017 17:40:56 -0500
Subject: [Spce-user] rtpengine: is there a timeout for one-sided no RTP
 traffic?
In-Reply-To: <CADkWibeCS0edJWUkuvDXTsgZ03izBSsr_pSQNh8J_Mr7uexOLA@mail.gmail.com>
References: <CADkWibeCS0edJWUkuvDXTsgZ03izBSsr_pSQNh8J_Mr7uexOLA@mail.gmail.com>
Message-ID: <04fb24e5-5c71-74c2-70dc-abc0f9267218@sipwise.com>

On 07/11/17 03:55 AM, Anthony Alba wrote:
> Trying to understand timeouts here:
>
> If I have one UA disappearing (no RTP packets, no graceful delete from
> SIP proxy) but the other side still sending RTP, will rtpengine
> timeout?

No, and this is intentional. If one side is dead but the other is still 
alive, it's the responsibility of the alive client to tear down the 
session. This applies to both timeout=... and silent-timeout=... 
options. Only final-timeout=... can be used to restrict the length of a 
session in this case.

Cheers


From mpower at yegtel.ca  Wed Nov  8 11:39:56 2017
From: mpower at yegtel.ca (Maxwell Power)
Date: Wed, 8 Nov 2017 09:39:56 -0700
Subject: [Spce-user] Can't update Subscriber Call Forward
Message-ID: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>

We have a customer who upon logging into their customer portal cannot update
their call forwarding. It also does not show the current status of the
forward. If one is set, it still shows 0 in the panel. When clicking on
configure preferences they receive a 500 error in the panel and we see the
following in the logs:

 

Nov  8 09:36:30 SBC01 ngcp-panel: ERROR: fatal error, id=14F52999BAC53D48,
timestamp=2017-11-08T16:36:30.292893000Z, error=Caught exception in
NGCP::Panel::Controller::Subscriber->preferences "Can't locate object method
"provisioning_voip_subscriber" via package
"NGCP::Panel::Model::DB::provisioning_voip_subscribers" at
/usr/share/perl5/NGCP/Panel/Utils/Subscriber.pm line 1398."

 

If I remove their call forwarding from the admin panel, we can access the
preferences, but as soon as we save a call forward, it goes to the 500
screen.

 

We are currently running mr5.5.1.

 

Cheers,
Maxwell Power

Technical Account Manager
Phone: (780) 809-9990 Ext. 417 | Toll Free: (855) 4-YEGTEL(934835) | Fax:
(780) 401-3390
YEGTEL Communications INC. | 10301 104 ST NW, Suite 55, Edmonton, Alberta,
T5J 1B9
Email:  <mailto:mpower at yegtel.ca> mpower at yegtel.ca | Web:
<https://www.yegtel.ca/> www.yegtel.ca

 

This e-mail and any attachments may contain confidential or privileged
information. If you are not an intended recipient, do not re-send, copy or
use this e-mail. Please also contact the sender immediately and delete this
e-mail in its entirety. Privilege is not waived by reason of mistaken
delivery to you. YEGTEL Communications and its affiliates accept no
liability whatsoever for loss or damage in relation to this e-mail and may
monitor, retain and/or review email. Opinions expressed in this e-mail are
those of the author and may not represent the opinions of YEGTEL
Communications and its affiliates.

 

Ce courriel et toutes ses pi?ces jointes peuvent contenir de l'information
de nature confidentielle ou privil?gi?e. Si vous avez re?u ce courriel par
erreur, merci de ne pas le transf?rer, le copier ou l'utiliser. Veuillez
communiquer imm?diatement avec l'exp?diteur et supprimer le message dans son
int?gralit?. Le fait de vous avoir envoy? ce courriel par erreur ne signifie
pas que l'exp?diteur renonce ? ses droits. YEGTEL Communications et ses
soci?t?s affili?es ne peuvent ?tre tenues responsables de toute perte ou
dommages li?s au pr?sent courriel et peuvent effectuer un suivi de ce
courriel, le conserver et l'examiner. Les opinions exprim?es dans le pr?sent
courriel sont celles de son auteur et non celles de YEGTEL Communications et
de ses soci?t?s affili?es.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171108/dcd7628b/attachment-0001.html>

From gjungwirth at sipwise.com  Wed Nov  8 12:41:42 2017
From: gjungwirth at sipwise.com (Gerhard Jungwirth)
Date: Wed, 8 Nov 2017 18:41:42 +0100
Subject: [Spce-user] Can't update Subscriber Call Forward
In-Reply-To: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>
References: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>
Message-ID: <d4bbd95a-1fda-f23e-9eaf-56e9e79d9349@sipwise.com>

Hi,

this has already been reported internally and will be fixed as soon as
possible.

Best Regards, Gerhard


On 2017-11-08 17:39, Maxwell Power wrote:
>
> We have a customer who upon logging into their customer portal cannot
> update their call forwarding. It also does not show the current status
> of the forward. If one is set, it still shows 0 in the panel. When
> clicking on configure preferences they receive a 500 error in the
> panel and we see the following in the logs:
>
> ?
>
> Nov? 8 09:36:30 SBC01 ngcp-panel: ERROR: fatal error,
> id=14F52999BAC53D48, timestamp=2017-11-08T16:36:30.292893000Z,
> error=Caught exception in
> NGCP::Panel::Controller::Subscriber->preferences "Can't locate object
> method "provisioning_voip_subscriber" via package
> "NGCP::Panel::Model::DB::provisioning_voip_subscribers" at
> /usr/share/perl5/NGCP/Panel/Utils/Subscriber.pm line 1398."
>
> ?
>
> If I remove their call forwarding from the admin panel, we can access
> the preferences, but as soon as we save a call forward, it goes to the
> 500 screen.
>
> ?
>
> We are currently running mr5.5.1.
>
> ?
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171108/40b83fc2/attachment-0001.html>

From matthias.hohl at telematica.at  Thu Nov  9 09:37:36 2017
From: matthias.hohl at telematica.at (Matthias Hohl)
Date: Thu, 09 Nov 2017 14:37:36 -0000
Subject: [Spce-user] German Language Files
Message-ID: <673C0777-465D-4684-AF6C-7C7B1AEFDA74@telematica.at>

Hello,

Is there any PRO user who can provide me the german language files for the soundset?

Afaik just english is included in SPCE version, but i would need german soundset too...

Any idea where i can get this?
thanks a lot...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171109/5f7d0a5a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2368 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171109/5f7d0a5a/attachment-0001.p7s>

From gjungwirth at sipwise.com  Tue Nov 14 05:37:44 2017
From: gjungwirth at sipwise.com (Gerhard Jungwirth)
Date: Tue, 14 Nov 2017 11:37:44 +0100
Subject: [Spce-user] Can't update Subscriber Call Forward
In-Reply-To: <d4bbd95a-1fda-f23e-9eaf-56e9e79d9349@sipwise.com>
References: <00f301d358b0$36c1df40$a4459dc0$@yegtel.ca>
 <d4bbd95a-1fda-f23e-9eaf-56e9e79d9349@sipwise.com>
Message-ID: <ce3e5ce8-fa96-16bf-9ee0-c94584e04208@sipwise.com>

Hi,

The fix for mr5.5.1 has just been released. Affected package: ngcp-panel.

Please run ngcp-update (or update according to your policy).

Thanks again for your report and feedback.

Gerhard


On 2017-11-08 18:41, Gerhard Jungwirth wrote:
>
> Hi,
>
> this has already been reported internally and will be fixed as soon as
> possible.
>
> Best Regards, Gerhard
>
>
> On 2017-11-08 17:39, Maxwell Power wrote:
>>
>> We have a customer who upon logging into their customer portal cannot
>> update their call forwarding. It also does not show the current
>> status of the forward. If one is set, it still shows 0 in the panel.
>> When clicking on configure preferences they receive a 500 error in
>> the panel and we see the following in the logs:
>>
>> ?
>>
>> Nov? 8 09:36:30 SBC01 ngcp-panel: ERROR: fatal error,
>> id=14F52999BAC53D48, timestamp=2017-11-08T16:36:30.292893000Z,
>> error=Caught exception in
>> NGCP::Panel::Controller::Subscriber->preferences "Can't locate object
>> method "provisioning_voip_subscriber" via package
>> "NGCP::Panel::Model::DB::provisioning_voip_subscribers" at
>> /usr/share/perl5/NGCP/Panel/Utils/Subscriber.pm line 1398."
>>
>> ?
>>
>> If I remove their call forwarding from the admin panel, we can access
>> the preferences, but as soon as we save a call forward, it goes to
>> the 500 screen.
>>
>> ?
>>
>> We are currently running mr5.5.1.
>>
>> ?
>>
>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171114/53f3bcf3/attachment-0001.html>

From axessofficetheo at gmail.com  Tue Nov 14 08:30:00 2017
From: axessofficetheo at gmail.com (Theo)
Date: Tue, 14 Nov 2017 15:30:00 +0200
Subject: [Spce-user] kamailio crashed
Message-ID: <CA+9+E=VnhH3QG2C-0GcvzWzY5kR4Ajc8W=A+nTzhErJ4mVcd=Q@mail.gmail.com>

HI

Today, for the first time in years, our kamailio crashed on 2.8lts.

In syslog I see this:

 sipwise kernel: [21774576.529912] kamailio[5381] general protection
ip:7f3fd72115ea sp:7fff0aba6350 error:0 in dialplan.so[7f3fd720a000+12000]
Nov 14 15:02:32 sipwise kernel: [21774576.577952] kamailio[5384] general
protection ip:7f3fd72115ea sp:7fff0aba6350 error:0 in
dialplan.so[7f3fd720a000+12000]
Nov 14 15:05:55 sipwise kernel: [21774778.974606] kamailio[26938] general
protection ip:526743 sp:7fff0aba4fd0 error:0 in kamailio[400000+206000]


Any ideas how to troubleshoot this?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171114/20ee5598/attachment-0001.html>

From wfulton at thirdhatch.com  Thu Nov 16 14:32:18 2017
From: wfulton at thirdhatch.com (William Fulton)
Date: Thu, 16 Nov 2017 19:32:18 +0000
Subject: [Spce-user] SPCE LTS Versions - known issues
Message-ID: <CY1PR11MB07788FD85321501225E09CBADD2E0@CY1PR11MB0778.namprd11.prod.outlook.com>

Hello,

We are about to build a second server to migrate our endpoints to. But I was curious if there was a list of known issues with the current LTS version that might inform my decision to wait for patches or use an older LTS version. Any help would be appreciated.

Thank you,
Bill

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171116/9dcb6768/attachment-0001.html>

From m.weigelt at ccgmbh.de  Fri Nov 17 04:58:06 2017
From: m.weigelt at ccgmbh.de (Weigelt, Martin)
Date: Fri, 17 Nov 2017 09:58:06 +0000
Subject: [Spce-user] New sip:provider CE mr5.5.1 is now available
In-Reply-To: <dbc6a916-9b73-498d-02c2-ba95d569963a@sipwise.com>
References: <dbc6a916-9b73-498d-02c2-ba95d569963a@sipwise.com>
Message-ID: <AFF8836ACAEEBE42BC8A7E813276AE3E0110E1AB90@EX10MBOX1K.hosting.inetserver.de>

Hi,

could you please describe the usage of the new licensed stuff?

Nov 13 ngcp-licensed[2503]: Up and running
Nov 13 ngcp-licensed[2503]: No license key configured, sending usage reports only
Nov 13 ngcp-licensed[2503]: Usage report: 0 calls, 2 subscribers, 0 registered subscribers

I?m pretty sure it?s not allowed by some local data protection laws?

--

Mit freundlichen Gr??en,
Best regards,

Dipl. Inform. (FH) Martin Weigelt
Communication Concept GmbH
Manager Operations / Support
Senior Lead Engineer Voice-/Server-infrastructure
Theklaer Strasse 42
04347 Leipzig

Telefon: +49 341 23405 211
Fax:     +49 341 23405 190
Mobile:  +49 151 24038213
Mail:    m.weigelt at ccgmbh.de<mailto:m.weigelt at ccgmbh.de>

Communication Concept GmbH
Registergericht: Amtsgericht Leipzig
Registernummer:  HR 6383

Von: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von sergii kipot
Gesendet: Freitag, 3. November 2017 11:50
An: spce-dev at lists.sipwise.com; spce-user at lists.sipwise.com
Betreff: [Spce-user] New sip:provider CE mr5.5.1 is now available


Dear community!



This is to inform you about the availability of the new SPCE mr5.5.1 !



The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images have

been uploaded, please check the handbook for all the details:

https://www.sipwise.org/doc/mr5.5.1/spce/ar01s04.html



Please find the list of all changes on our web site:

https://www.sipwise.org/news/announcements/sipprovider-mr5-5-1-released/



The release mr5.5 is official LTS release. It will be supported till Oct 31, 2020



Please report issues if any on this mailing list and thank you for being a part of the community!





--

Sergii Kipot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171117/86490573/attachment-0001.html>

From winwithschwinn at gmail.com  Sat Nov 18 20:15:01 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Sat, 18 Nov 2017 17:15:01 -0800
Subject: [Spce-user] MR 4.5.4 Automatic Backup Not Working
Message-ID: <CAMi8z0j9QQdtbMNPq6Xv=rw0QRuDhqF9UWy4a3HXWWWCdVt+yg@mail.gmail.com>

Hello All,

A couple of things that may have already been discussed.  I am running CE
mr4.5.4 and have enabled the automatic backup feature as described in the
handbook and it seems to not be working.  Can someone give me some advice.
The entire backuptools section was missing from my config.yml file so I
added it manually.  I'll copy what I have below so you can take a look.  I
ran the command "ngcpcfg apply 'enabled the backup feature'" after making
my change but it does not seem to be working as described.

Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution
section refers to "C.1.3 backup tools section of the 'NGCP configs
overview'" which is actually located in section B.1.4.

Thank you all!


---My backuptools config section of config.yml---
backuptools:
  cdrexport_backup:
    enable: 'yes'
  etc_backup:
    enable: 'yes'
  mail:
    address: winwithschwinn at gmail.com
    error_subject: '[ngcp-backup] Problems detected during daily backup'
    log_subject: '[ngcp-backup] Daily backup report'
    send_errors: 'yes'
    send_log: 'yes'
  mysql_backup:
    enable: 'yes'
    exclude_dbs: 'syslog sipstats information_schema'
  rotate_days: 7
  storage_dir: '/var/backup/ngcp_backup'
  temp_backup_dir: '/tmp/ngcp_backup'
------
-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171118/366de6f8/attachment-0001.html>

From spce at irg-x.net  Tue Nov 21 12:47:03 2017
From: spce at irg-x.net (Oleg)
Date: Tue, 21 Nov 2017 18:47:03 +0100
Subject: [Spce-user] Move scubscriber to another customer
Message-ID: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>

Hello everyone,

I was wandering if there is a way to move a subscriber from one Customer 
to another (within Sipwise). I was about to 'terminate' it under one 
customer to 'create' it under another. Is there a better way?

Thanks.

Oleg


From winwithschwinn at gmail.com  Tue Nov 21 20:20:07 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Tue, 21 Nov 2017 17:20:07 -0800
Subject: [Spce-user] Backup... Second try
Message-ID: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>

Sending this out again.  Anyone?

---

Hello All,

A couple of things that may have already been discussed.  I am running CE
mr4.5.4 and have enabled the automatic backup feature as described in the
handbook and it seems to not be working.  Can someone give me some advice.
The entire backuptools section was missing from my config.yml file so I
added it manually.  I'll copy what I have below so you can take a look.  I
ran the command "ngcpcfg apply 'enabled the backup feature'" after making
my change but it does not seem to be working as described.

Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution
section refers to "C.1.3 backup tools section of the 'NGCP configs
overview'" which is actually located in section B.1.4.

Thank you all!


---My backuptools config section of config.yml---
backuptools:
  cdrexport_backup:
    enable: 'yes'
  etc_backup:
    enable: 'yes'
  mail:
    address: winwithschwinn at gmail.com
    error_subject: '[ngcp-backup] Problems detected during daily backup'
    log_subject: '[ngcp-backup] Daily backup report'
    send_errors: 'yes'
    send_log: 'yes'
  mysql_backup:
    enable: 'yes'
    exclude_dbs: 'syslog sipstats information_schema'
  rotate_days: 7
  storage_dir: '/var/backup/ngcp_backup'
  temp_backup_dir: '/tmp/ngcp_backup'
------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171121/b1811d25/attachment-0001.html>

From mpower at yegtel.ca  Thu Nov 23 20:34:48 2017
From: mpower at yegtel.ca (Maxwell Power)
Date: Thu, 23 Nov 2017 18:34:48 -0700
Subject: [Spce-user] Voicemail Trouble
Message-ID: <00c101d364c4$6c45aeb0$44d10c10$@yegtel.ca>

Using mr5.5.1 we can't seem to get voicemail to work properly for users.

 

When calling a users voicemail or the access number of 2000 there is no RTP
traffic. We can get some traffic back by restarting asterisk but as soon as
someone connects to a users voicemail it provides no audio again until
restarted.

 

Tried to update the greetings for a user in their subscriber preferences.
After saving a new one, we now receive an error 500 when trying to view that
subscribers preferences.

 

Nov 23 18:28:27 SBC01 ngcp-panel: ERROR: fatal error, id=14F9E1558239CD40,
timestamp=2017-11-24T01:28:27.332808000Z, error=Caught exception in
NGCP::Panel::Controller::Subscriber->preferences "Not a HASH reference at
/usr/share/perl5/NGCP/Panel/Controller/Subscriber.pm line 651."

 

/var/log/ngcp/voicemail.log:

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:24:18 SBC01 asterisk[15420]: NOTICE[20160][C-00000003]:
apps/app_voicemail.c:4193 in find_user_realtime_by_alias: Found mailbox
'1778XXXXXXX' for alias '1778XXXXXXX'

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:8399 in load_vmu_timezone: Using default timezone
'localtime' for mailbox 'fd12bc8d-cc35-44aa-a402-212947dc6e5e'

Nov 23 18:25:19 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:25:19 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000003' for lack of
RTP activity in 61 seconds

Nov 23 18:25:25 SBC01 asterisk[15420]: DEBUG[20712][C-00000004]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:25:51 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:15 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog '889E443D at 209.197.130.80' with
owner SIP/sip_proxy-00000004 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:23 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:26 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000004' for lack of
RTP activity in 61 seconds

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171123/a754c65a/attachment-0001.html>

From skipot at sipwise.com  Fri Nov 24 13:30:45 2017
From: skipot at sipwise.com (sergii kipot)
Date: Fri, 24 Nov 2017 19:30:45 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <c973a284-d257-c2c7-838b-334b9dcdf838@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171124/7d9fa649/attachment-0001.html>

From mpower at yegtel.ca  Fri Nov 24 13:32:36 2017
From: mpower at yegtel.ca (Maxwell Power)
Date: Fri, 24 Nov 2017 11:32:36 -0700
Subject: [Spce-user] Voicemail Trouble
Message-ID: <002801d36552$9ae048f0$d0a0dad0$@yegtel.ca>

Using mr5.5.1 we can't seem to get voicemail to work properly for any users.

 

When calling a users voicemail or the access number of 2000 there is no RTP
traffic. We can get some traffic back by restarting asterisk but as soon as
someone connects to a users voicemail it provides no audio again until
restarted. It would seem at the moment that calls to voicemail are
completely broken.

 

Tried to update the greetings for a user in their subscriber preferences.
After saving a new one, we now receive an error 500 when trying to view that
subscribers preferences.

 

/var/log/ngcp/panel.log:

Nov 23 18:28:27 SBC01 ngcp-panel: ERROR: fatal error, id=14F9E1558239CD40,
timestamp=2017-11-24T01:28:27.332808000Z, error=Caught exception in
NGCP::Panel::Controller::Subscriber->preferences "Not a HASH reference at
/usr/share/perl5/NGCP/Panel/Controller/Subscriber.pm line 651."

 

/var/log/ngcp/voicemail.log:

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:24:18 SBC01 asterisk[15420]: NOTICE[20160][C-00000003]:
apps/app_voicemail.c:4193 in find_user_realtime_by_alias: Found mailbox
'1778XXXXXXX' for alias '1778XXXXXXX'

Nov 23 18:24:18 SBC01 asterisk[15420]: DEBUG[20160][C-00000003]:
apps/app_voicemail.c:8399 in load_vmu_timezone: Using default timezone
'localtime' for mailbox 'fd12bc8d-cc35-44aa-a402-212947dc6e5e'

Nov 23 18:25:19 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:25:19 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000003' for lack of
RTP activity in 61 seconds

Nov 23 18:25:25 SBC01 asterisk[15420]: DEBUG[20712][C-00000004]:
apps/app_voicemail.c:1878 in find_user: call find_user_realtime for
'1778XXXXXXX at default'

Nov 23 18:25:51 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:15 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog '889E443D at 209.197.130.80' with
owner SIP/sip_proxy-00000004 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:23 SBC01 asterisk[15420]: WARNING[15448]: chan_sip.c:4339 in
__sip_autodestruct: Autodestruct on dialog 'snzTxVICLvdeN5kSiUSO2g..' with
owner SIP/sip_proxy-00000003 in place (Method: BYE). Rescheduling
destruction for 10000 ms

Nov 23 18:26:26 SBC01 asterisk[15420]: NOTICE[15448]: chan_sip.c:29415 in
check_rtp_timeout: Disconnecting call 'SIP/sip_proxy-00000004' for lack of
RTP activity in 61 seconds

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171124/67387499/attachment-0001.html>

From misesrosas246 at gmail.com  Fri Nov 24 13:39:22 2017
From: misesrosas246 at gmail.com (moises rosas)
Date: Fri, 24 Nov 2017 14:39:22 -0400
Subject: [Spce-user] Structure of IVR menus
Message-ID: <CAPR5FSggQxBk2hn-XSDAxj7N8+897J8i3dG3sAsGfFm_hWKodA@mail.gmail.com>

hello ...

a query how can I create a IVR menu structure in sipwise.

Thank you ...

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171124/7056c0d7/attachment-0001.html>

From misesrosas246 at gmail.com  Fri Nov 24 14:17:31 2017
From: misesrosas246 at gmail.com (moises rosas)
Date: Fri, 24 Nov 2017 15:17:31 -0400
Subject: [Spce-user] Structure of IVR menus
Message-ID: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>

hello ...

a query how can I create a IVR menu structure in sipwise.

Thank you ...


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171124/bfd48e31/attachment-0001.html>

From stefanormc at gmail.com  Mon Nov 13 06:05:54 2017
From: stefanormc at gmail.com (stefanormc)
Date: Mon, 13 Nov 2017 11:05:54 -0000
Subject: [Spce-user] connect 2 sipwise as trunk
Message-ID: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>

Hi all,

what would be the best way to connect 2 spce to each other?

I have different termination trunks on each sipwise (same ver. 5.4.1), my
goal is be able to address calls to terminate on either spce

I tried to setup a simple peer on each spce pointing to the other but it
does not seem to work.

thanks
ciao

stefano
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171113/9d76119d/attachment-0001.html>

From skipot at sipwise.com  Mon Nov 27 08:39:32 2017
From: skipot at sipwise.com (sergii kipot)
Date: Mon, 27 Nov 2017 14:39:32 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <5a205f74-c194-39c1-c85f-9a9a9dfb445c@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171127/637a91d9/attachment-0001.html>

From misesrosas246 at gmail.com  Mon Nov 27 08:42:32 2017
From: misesrosas246 at gmail.com (moises rosas)
Date: Mon, 27 Nov 2017 09:42:32 -0400
Subject: [Spce-user] Fwd: Structure of IVR menus
In-Reply-To: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
References: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
Message-ID: <CAPR5FSjsFk6xsv2DDOXyETHyWQzmKSk=86tPtMDd+kX+=PQJgw@mail.gmail.com>

hello ...

a query how can I create a IVR menu structure in sipwise.

Thank you ...


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Libre
de virus. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#m_7535564484405600763_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171127/78bb0586/attachment-0001.html>

From skipot at sipwise.com  Mon Nov 27 11:28:22 2017
From: skipot at sipwise.com (sergii kipot)
Date: Mon, 27 Nov 2017 17:28:22 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <4ac912e2-a8f6-5b0f-48a8-553e6b6de6f2@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171127/3d9348ee/attachment-0001.html>

From agranig at sipwise.com  Tue Nov 28 09:52:04 2017
From: agranig at sipwise.com (Andreas Granig)
Date: Tue, 28 Nov 2017 15:52:04 +0100
Subject: [Spce-user] Test
Message-ID: <45d2d001-8f64-4c96-ef73-b9336a28221f@sipwise.com>

Please disregard this test mail.

Best,
Andreas


From skipot at sipwise.com  Tue Nov 28 12:36:29 2017
From: skipot at sipwise.com (sergii kipot)
Date: Tue, 28 Nov 2017 18:36:29 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <ca4a3b94-9075-abea-cd49-20b457f67fa7@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/4306aa56/attachment-0001.html>

From skipot at sipwise.com  Tue Nov 28 13:11:56 2017
From: skipot at sipwise.com (sergii kipot)
Date: Tue, 28 Nov 2017 19:11:56 +0100
Subject: [Spce-user] New sip:provider CE mr5.4.2 is now available
Message-ID: <2baee0f6-c2de-f3be-a683-2f2315561724@sipwise.com>

Dear community!

This is to inform about availability of the new SPCE mr5.4.2 !

https://www.sipwise.org/news/announcements/sipprovider-mr5-4-2-released/

mr5.4.2 is the last build of mr5.4 branch.
Please upgrade to the next mr5.5 release.

The InstallCD media, Vagrant box, Virtualbox, VMware and AMI images as
well as Docker hub container have been uploaded. As usual, please check
the handbook at https://www.sipwise.org/doc/mr5.4.2/spce/?
<https://www.sipwise.org/doc/mr5.4.2/spce/> for details.

Please report issues if any to this mailing list and thank you for
being a part of the community!

-- 
Sergii Kipot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/d2786395/attachment-0001.html>

From manwe at sipdoc.net  Tue Nov 28 14:32:40 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:32:40 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
Message-ID: <20171128203240.0ad077c6@multivac>

El Mon, 13 Nov 2017 12:05:43 +0100
stefanormc <stefanormc at gmail.com> escribi?:

> Hi all,
> 
> what would be the best way to connect 2 spce to each other?
> 
> I have different termination trunks on each sipwise (same ver. 5.4.1), my
> goal is be able to address calls to terminate on either spce
> 
> I tried to setup a simple peer on each spce pointing to the other but it
> does not seem to work.
> 

There's no easy way if I understood your scenario. You'll need to manually
configure that. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/fa2b46de/attachment-0001.sig>

From manwe at sipdoc.net  Tue Nov 28 14:33:51 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:33:51 +0100
Subject: [Spce-user] kamailio crashed
In-Reply-To: <CA+9+E=VnhH3QG2C-0GcvzWzY5kR4Ajc8W=A+nTzhErJ4mVcd=Q@mail.gmail.com>
References: <CA+9+E=VnhH3QG2C-0GcvzWzY5kR4Ajc8W=A+nTzhErJ4mVcd=Q@mail.gmail.com>
Message-ID: <20171128203351.1144c8eb@multivac>

El Tue, 14 Nov 2017 15:30:00 +0200
Theo <axessofficetheo at gmail.com> escribi?:

> HI
> 
> Today, for the first time in years, our kamailio crashed on 2.8lts.
> 
> In syslog I see this:
> 
>  sipwise kernel: [21774576.529912] kamailio[5381] general protection
> ip:7f3fd72115ea sp:7fff0aba6350 error:0 in dialplan.so[7f3fd720a000+12000]
> Nov 14 15:02:32 sipwise kernel: [21774576.577952] kamailio[5384] general
> protection ip:7f3fd72115ea sp:7fff0aba6350 error:0 in
> dialplan.so[7f3fd720a000+12000]
> Nov 14 15:05:55 sipwise kernel: [21774778.974606] kamailio[26938] general
> protection ip:526743 sp:7fff0aba4fd0 error:0 in kamailio[400000+206000]
> 
> 
> Any ideas how to troubleshoot this?


You'd need to create a bt of the core.

Anyway, dialplan.so takes care of rewrite rules. Check if you did something
nasty since last reboot.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/59e7f497/attachment-0001.sig>

From manwe at sipdoc.net  Tue Nov 28 14:35:08 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:35:08 +0100
Subject: [Spce-user] SPCE LTS Versions - known issues
In-Reply-To: <CY1PR11MB07788FD85321501225E09CBADD2E0@CY1PR11MB0778.namprd11.prod.outlook.com>
References: <CY1PR11MB07788FD85321501225E09CBADD2E0@CY1PR11MB0778.namprd11.prod.outlook.com>
Message-ID: <20171128203508.3ec73181@multivac>

El Thu, 16 Nov 2017 19:32:18 +0000
William Fulton <wfulton at thirdhatch.com> escribi?:

> Hello,
> 
> We are about to build a second server to migrate our endpoints to. But I was
> curious if there was a list of known issues with the current LTS version that
> might inform my decision to wait for patches or use an older LTS version. Any
> help would be appreciated.
> 
>

If you aim for stability I'd suggest 4.5.x lts as your choice. In my
experience, although all NGCP versions are reliable, it takes some time for the
LTS versions to become rock solid. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/52087798/attachment-0001.sig>

From manwe at sipdoc.net  Tue Nov 28 14:35:45 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:35:45 +0100
Subject: [Spce-user] Move scubscriber to another customer
In-Reply-To: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
References: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
Message-ID: <20171128203545.4b0b0524@multivac>

El Tue, 21 Nov 2017 18:47:03 +0100
Oleg <spce at irg-x.net> escribi?:

> Hello everyone,
> 
> I was wandering if there is a way to move a subscriber from one Customer 
> to another (within Sipwise). I was about to 'terminate' it under one 
> customer to 'create' it under another. Is there a better way?
> 
> 

Not that I know. You'll need to terminate and recreate.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/33931a12/attachment-0001.sig>

From manwe at sipdoc.net  Tue Nov 28 14:37:55 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Tue, 28 Nov 2017 20:37:55 +0100
Subject: [Spce-user] Fwd: Structure of IVR menus
In-Reply-To: <CAPR5FSjsFk6xsv2DDOXyETHyWQzmKSk=86tPtMDd+kX+=PQJgw@mail.gmail.com>
References: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
 <CAPR5FSjsFk6xsv2DDOXyETHyWQzmKSk=86tPtMDd+kX+=PQJgw@mail.gmail.com>
Message-ID: <20171128203755.0754f9dc@multivac>

El Mon, 27 Nov 2017 09:42:32 -0400
moises rosas <misesrosas246 at gmail.com> escribi?:

> hello ...
> 
> a query how can I create a IVR menu structure in sipwise.
> 
> 

Please, don't send the same email three times. NGCP is not a pbx solution
unless you buy de commercial PBX module and use the Pro version of the product.
For IVR and other PBX related stuff you'll need to use a cloud pbx solution
like pekePBX. 


cheers,

Jon

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/f8d6039f/attachment-0001.sig>

From dgrotti at sipwise.com  Wed Nov 29 05:50:26 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 11:50:26 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <20171128203240.0ad077c6@multivac>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
Message-ID: <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>

Hi Stefano,

You can configure as peer->subscriber.
On SPCE 1:
- you configure SPCE 2 as peering server with authenticatio

On SPCE 2:
- you configure SPCE 1 as Subscriber.


Daniel



On 11/28/2017 08:32 PM, Jon Bonilla (Manwe) wrote:
> El Mon, 13 Nov 2017 12:05:43 +0100
> stefanormc <stefanormc at gmail.com> escribi?:
>
>> Hi all,
>>
>> what would be the best way to connect 2 spce to each other?
>>
>> I have different termination trunks on each sipwise (same ver. 5.4.1), my
>> goal is be able to address calls to terminate on either spce
>>
>> I tried to setup a simple peer on each spce pointing to the other but it
>> does not seem to work.
>>
> There's no easy way if I understood your scenario. You'll need to manually
> configure that.
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/9675f3a5/attachment-0001.html>

From dgrotti at sipwise.com  Wed Nov 29 05:55:28 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 11:55:28 +0100
Subject: [Spce-user] MR 4.5.4 Automatic Backup Not Working
In-Reply-To: <CAMi8z0j9QQdtbMNPq6Xv=rw0QRuDhqF9UWy4a3HXWWWCdVt+yg@mail.gmail.com>
References: <CAMi8z0j9QQdtbMNPq6Xv=rw0QRuDhqF9UWy4a3HXWWWCdVt+yg@mail.gmail.com>
Message-ID: <71bc0a91-2614-deb9-7485-45a49ae9ec50@sipwise.com>

Hi,
what is not working exactly ?
Please try to run manually

bash -x /usr/sbin/ngcp-backup


and then check /var/log/ngcp/backup_error.log and see what happens

Daniel




On 11/19/2017 02:15 AM, Matt Schwinn wrote:
> Hello All,
>
> A couple of things that may have already been discussed.? I am running 
> CE mr4.5.4 and have enabled the automatic backup feature as described 
> in the handbook and it seems to not be working.? Can someone give me 
> some advice.? The entire backuptools section was missing from my 
> config.yml file so I added it manually.? I'll copy what I have below 
> so you can take a look.? I ran the command "ngcpcfg apply 'enabled the 
> backup feature'" after making my change but it does not seem to be 
> working as described.
>
> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup 
> solution section refers to "C.1.3 backup tools section of the 'NGCP 
> configs overview'" which is actually located in section B.1.4.
>
> Thank you all!
>
>
> ---My backuptools config section of config.yml---
> backuptools:
> ? cdrexport_backup:
> ??? enable: 'yes'
> ? etc_backup:
> ??? enable: 'yes'
> ? mail:
> ??? address: winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>
> ??? error_subject: '[ngcp-backup] Problems detected during daily backup'
> ??? log_subject: '[ngcp-backup] Daily backup report'
> ??? send_errors: 'yes'
> ??? send_log: 'yes'
> ? mysql_backup:
> ??? enable: 'yes'
> ??? exclude_dbs: 'syslog sipstats information_schema'
> ? rotate_days: 7
> ? storage_dir: '/var/backup/ngcp_backup'
> ? temp_backup_dir: '/tmp/ngcp_backup'
> ------
> -- 
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
> ????? and
> Company B
> 209-202-3329
> www.TCGTechLLC.com <http://www.TCGTechLLC.com>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/ba661a82/attachment-0001.html>

From dgrotti at sipwise.com  Wed Nov 29 05:58:47 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 11:58:47 +0100
Subject: [Spce-user] Structure of IVR menus
In-Reply-To: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
References: <CAPR5FSjeqkEAqmqEEZeoQ0mRBHADXUv5OYu2B76KSeN+9GN6QA@mail.gmail.com>
Message-ID: <afaa9fe2-06b9-0709-59bc-8695f6c51f98@sipwise.com>

Hi,
there is no IVR as SPCE is a class 5 solution, not a pbx.
In order to have IVRs you should buy the commercial version of NGCP (C5 
pro or Carrier) and add the CloudPBX module on top of that.
Please check our sales team for additional information.

Daniel





On 11/24/2017 08:17 PM, moises rosas wrote:
> hello ...
>
> a query how can I create a IVR menu structure in sipwise.
>
> Thank you ...
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> 
> 	Libre de virus. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> 
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/1a1a98f9/attachment-0001.html>

From Christian.Osburg at osburg.it  Tue Nov 14 11:14:15 2017
From: Christian.Osburg at osburg.it (Christian Osburg)
Date: Tue, 14 Nov 2017 16:14:15 +0000
Subject: [Spce-user] 180 Ringing with SDP
Message-ID: <d7acdf1a62314af6adeaffa009be8ba9@osburg.it>

Hello,

 

I?m using SIP:Provider CE Edition here in Germany.

 

My callees didn?t get a ringtone when they call a subscriber of my NGCP.

My upstream provider told me that my NGCP is sending ?180 Ringing? but
without SDP to him. Thats the problem.

 

Is it possible to tell NGCP that SDP should send within the ?180 Ringing?
answer?

 

Thank you for your answers in advance.

 

Kind regards,

Christian

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171114/f950c2e5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5177 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171114/f950c2e5/attachment-0001.p7s>

From service at 4voice.nl  Tue Nov 21 13:48:30 2017
From: service at 4voice.nl (4voice Service)
Date: Tue, 21 Nov 2017 19:48:30 +0100
Subject: [Spce-user] rate-o-mat rates calls with 0 cost even though a rate
	is available
In-Reply-To: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
References: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
Message-ID: <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>


Hi all,

I have an issue with rate-o-mat rating most calls with 0 cost even tough
a billing fee is available:


situation:

subscriber X has a billing profile assigned

the billing profile contains a record

source: .
destination: ^43.+$
fee: 0.02

When the subscriber calls a record is added to the cdr table.

But after rate-o-matic rates the call it says rating status "rated", but
the cost is still 0

+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| source_user? | destination_user_dialed | duration |
source_customer_cost | rating_status | source_customer_billing_fee_id |
destination_customer_cost | destination_customer_billing_fee_id |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| 4367xxxxxxx | 431xxxxxxxxxxx ?????????? |? 129.825 | 0.000000 |
ok??????????? |?????????????????????????? NULL |
0.000000 |??????????????????????????????? NULL |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
1 row in set (0.00 sec)

Note that the billing_fee_ids also remain 0.

I've tried creating and assigning a new billing profile with just 1
catchall record. But after setting the status to 'unrated' it just gets
rated again with 0 cost.

There are no errors in cdr.log and rate-o-mat.log (the latter shows the
cdr has been rated, but no additional errors/info)

How do I troubleshoot/fix?

Regards,
Pieter




From dgrotti at sipwise.com  Wed Nov 29 06:10:22 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 12:10:22 +0100
Subject: [Spce-user] 180 Ringing with SDP
In-Reply-To: <d7acdf1a62314af6adeaffa009be8ba9@osburg.it>
References: <d7acdf1a62314af6adeaffa009be8ba9@osburg.it>
Message-ID: <b8a90b8e-8922-ce48-fc22-a2f31ef7a651@sipwise.com>

Hi,
NGCP does not send any ring back tone, cause we do not generate them.
What your provider is telling you is not correct.
Sending back a 180 RInging means that the UAC should generate the ring 
tone locally.
There is no requirements in RFC saying that a Class 5 (or proxy) must 
generate a ring tone vie SDP.
NGCP forwards back to the caller what it receives from the callee.


This is a problem of your provider, not on NGCP.

Cheers,
Daniel





On 11/14/2017 05:14 PM, Christian Osburg wrote:
>
> Hello,
>
> I?m using SIP:Provider CE Edition here in Germany.
>
> My callees didn?t get a ringtone when they call a subscriber of my NGCP.
>
> My upstream provider told me that my NGCP is sending ?180 Ringing? but 
> without SDP to him. Thats the problem.
>
> Is it possible to tell NGCP that SDP should send within the ?180 
> Ringing? answer?
>
> Thank you for your answers in advance.
>
> Kind regards,
>
> Christian
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/8dc4507c/attachment-0001.html>

From dgrotti at sipwise.com  Wed Nov 29 06:18:49 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 12:18:49 +0100
Subject: [Spce-user] rate-o-mat rates calls with 0 cost even though a
 rate is available
In-Reply-To: <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
References: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
 <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
Message-ID: <a4600962-cd2a-e852-b183-21939c270717@sipwise.com>

Hi,
you should first check the CDR of that call in mysql, accounting.cdr table.
in CDR you will see the filed:

source_customer_billing_fee_id: xxxxxx


That number is the billing_fee_id matched to bill that call, and you can 
find it via:

select * from billing_fees_history where id='xxxxx'

in this way you can see if the call is really fetching the expected fee 
or not.

 From what you are saying it seems that the call is fetching another fee 
with rate 0.


Daniel





On 11/21/2017 07:48 PM, 4voice Service wrote:
>
> Hi all,
>
> I have an issue with rate-o-mat rating most calls with 0 cost even tough
> a billing fee is available:
>
>
> situation:
>
> subscriber X has a billing profile assigned
>
> the billing profile contains a record
>
> source: .
> destination: ^43.+$
> fee: 0.02
>
> When the subscriber calls a record is added to the cdr table.
>
> But after rate-o-matic rates the call it says rating status "rated", but
> the cost is still 0
>
> +--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+ 
>
> | source_user? | destination_user_dialed | duration |
> source_customer_cost | rating_status | source_customer_billing_fee_id |
> destination_customer_cost | destination_customer_billing_fee_id |
> +--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+ 
>
> | 4367xxxxxxx | 431xxxxxxxxxxx ?????????? |? 129.825 | 0.000000 |
> ok??????????? |?????????????????????????? NULL |
> 0.000000 |??????????????????????????????? NULL |
> +--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+ 
>
> 1 row in set (0.00 sec)
>
> Note that the billing_fee_ids also remain 0.
>
> I've tried creating and assigning a new billing profile with just 1
> catchall record. But after setting the status to 'unrated' it just gets
> rated again with 0 cost.
>
> There are no errors in cdr.log and rate-o-mat.log (the latter shows the
> cdr has been rated, but no additional errors/info)
>
> How do I troubleshoot/fix?
>
> Regards,
> Pieter
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user



From rkrenn at sipwise.com  Wed Nov 29 06:22:26 2017
From: rkrenn at sipwise.com (Rene Krenn)
Date: Wed, 29 Nov 2017 12:22:26 +0100
Subject: [Spce-user] rate-o-mat rates calls with 0 cost even though a
	rate	is available
In-Reply-To: <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
References: <2b9ed8de-3afe-3e43-84a8-8f69e473f8bc@4voice.nl>
 <93cdbb47-e0a0-abd9-9272-579b1a0e223c@4voice.nl>
Message-ID: <00ac01d36904$566f0b60$034d2220$@sipwise.com>

Hi,

did you check rate_at timestmap or tried to let it re-rate the cdr? (maybe it that result was created before you adjusted fees).

You can enable rate-o-mat debug in /etc/ngcp-config/templates/etc/default/ngcp-rate-o-mat.tt2 and then look at detailed output in /var/log/ngcp/rate-o-mat.log.

regards

-----Urspr?ngliche Nachricht-----
Von: Spce-user [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von 4voice Service
Gesendet: Dienstag, 21. November 2017 19:49
An: spce-user at lists.sipwise.com
Betreff: [Spce-user] rate-o-mat rates calls with 0 cost even though a rate is available


Hi all,

I have an issue with rate-o-mat rating most calls with 0 cost even tough a billing fee is available:


situation:

subscriber X has a billing profile assigned

the billing profile contains a record

source: .
destination: ^43.+$
fee: 0.02

When the subscriber calls a record is added to the cdr table.

But after rate-o-matic rates the call it says rating status "rated", but the cost is still 0

+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| source_user  | destination_user_dialed | duration |
source_customer_cost | rating_status | source_customer_billing_fee_id | destination_customer_cost | destination_customer_billing_fee_id |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
| 4367xxxxxxx | 431xxxxxxxxxxx            |  129.825 | 0.000000 |
ok            |                           NULL |
0.000000 |                                NULL |
+--------------+-------------------------+----------+----------------------+---------------+--------------------------------+---------------------------+-------------------------------------+
1 row in set (0.00 sec)

Note that the billing_fee_ids also remain 0.

I've tried creating and assigning a new billing profile with just 1 catchall record. But after setting the status to 'unrated' it just gets rated again with 0 cost.

There are no errors in cdr.log and rate-o-mat.log (the latter shows the cdr has been rated, but no additional errors/info)

How do I troubleshoot/fix?

Regards,
Pieter


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user



From alutay at sipwise.com  Wed Nov 29 08:09:13 2017
From: alutay at sipwise.com (Alex Lutay)
Date: Wed, 29 Nov 2017 14:09:13 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
Message-ID: <671d485c-3564-7844-1a59-5c42bd892057@sipwise.com>

Hi,

For the history, replied in the first thread here:
https://lists.sipwise.com/pipermail/spce-user/2017-November/011979.html

On 11/22/2017 02:20 AM, Matt Schwinn wrote:
> Sending this out again.? Anyone?

-- 
Alex Lutay


From rcuaresma at telcon.es  Tue Nov 28 14:33:46 2017
From: rcuaresma at telcon.es (Robert Cuaresma)
Date: Tue, 28 Nov 2017 20:33:46 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
Message-ID: <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>

Hi Matt,

Backup tools are only available in PRO/CARRIER only. I attached a e-mail 
from Alex Lutay that he confirm that.

Saludos,
Robert Cuaresma

El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
> Sending this out again.? Anyone?
>
> ---
>
> Hello All,
>
> A couple of things that may have already been discussed.? I am running 
> CE mr4.5.4 and have enabled the automatic backup feature as described 
> in the handbook and it seems to not be working.? Can someone give me 
> some advice.? The entire backuptools section was missing from my 
> config.yml file so I added it manually.? I'll copy what I have below 
> so you can take a look.? I ran the command "ngcpcfg apply 'enabled the 
> backup feature'" after making my change but it does not seem to be 
> working as described.
>
> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup 
> solution section refers to "C.1.3 backup tools section of the 'NGCP 
> configs overview'" which is actually located in section B.1.4.
>
> Thank you all!
>
>
> ---My backuptools config section of config.yml---
> backuptools:
> ? cdrexport_backup:
> ??? enable: 'yes'
> ? etc_backup:
> ??? enable: 'yes'
> ? mail:
> ??? address: winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>
> ??? error_subject: '[ngcp-backup] Problems detected during daily backup'
> ??? log_subject: '[ngcp-backup] Daily backup report'
> ??? send_errors: 'yes'
> ??? send_log: 'yes'
> ? mysql_backup:
> ??? enable: 'yes'
> ??? exclude_dbs: 'syslog sipstats information_schema'
> ? rotate_days: 7
> ? storage_dir: '/var/backup/ngcp_backup'
> ? temp_backup_dir: '/tmp/ngcp_backup'
> ------
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/5fd074f4/attachment-0001.html>
-------------- next part --------------
An embedded message was scrubbed...
From: Alex Lutay <alutay at sipwise.com>
Subject: Re: [Spce-user] Backup is not integrated.
Date: Fri, 26 May 2017 12:45:32 +0200
Size: 12715
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171128/5fd074f4/attachment-0001.mht>

From winwithschwinn at gmail.com  Wed Nov 29 11:19:03 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 08:19:03 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
Message-ID: <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>

Uh... no.  Not according to the handbook:

https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf

13.1.2 The built-in backup solution
The sip:provider CE comes with an easy-to-use solution that creates
everyday backups of the most important data:

If what Alex says is true then this needs to be removed from the handbook.

On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
wrote:

> Hi Matt,
>
> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
> from Alex Lutay that he confirm that.
>
> Saludos,
> Robert Cuaresma
>
> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>
> Sending this out again.  Anyone?
>
> ---
>
> Hello All,
>
> A couple of things that may have already been discussed.  I am running CE
> mr4.5.4 and have enabled the automatic backup feature as described in the
> handbook and it seems to not be working.  Can someone give me some advice.
> The entire backuptools section was missing from my config.yml file so I
> added it manually.  I'll copy what I have below so you can take a look.  I
> ran the command "ngcpcfg apply 'enabled the backup feature'" after making
> my change but it does not seem to be working as described.
>
> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution
> section refers to "C.1.3 backup tools section of the 'NGCP configs
> overview'" which is actually located in section B.1.4.
>
> Thank you all!
>
>
> ---My backuptools config section of config.yml---
> backuptools:
>   cdrexport_backup:
>     enable: 'yes'
>   etc_backup:
>     enable: 'yes'
>   mail:
>     address: winwithschwinn at gmail.com
>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>     log_subject: '[ngcp-backup] Daily backup report'
>     send_errors: 'yes'
>     send_log: 'yes'
>   mysql_backup:
>     enable: 'yes'
>     exclude_dbs: 'syslog sipstats information_schema'
>   rotate_days: 7
>   storage_dir: '/var/backup/ngcp_backup'
>   temp_backup_dir: '/tmp/ngcp_backup'
> ------
>
>
> _______________________________________________
> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>
>
>
>
> ---------- Forwarded message ----------
> From: Alex Lutay <alutay at sipwise.com>
> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
> Cc:
> Bcc:
> Date: Fri, 26 May 2017 12:45:32 +0200
> Subject: Re: [Spce-user] Backup is not integrated.
> Hi,
>
> As Andrew Pogrebennyk wrote in a thread,
> backuptools is for PRO/Carrier only.
>
> This is why CE validation doesn't like it.
>
> On 05/25/2017 06:25 PM, Raul Alonso wrote:
> > I have same issue, If I add the section according to the documentation
> and execute: ngcpcfg --validate check
> >
> > 2017-05-25 18:23:46: Error: Invalid schema detected for
> /etc/ngcp-config/config.yml
> > /etc/ngcp-config/config.yml#0: INVALID
> >   - [/backuptools] Unexpected key 'backuptools'
>
> --
> Alex Lutay
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>


-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/9a88ac9f/attachment-0001.html>

From dgrotti at sipwise.com  Wed Nov 29 11:35:03 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Wed, 29 Nov 2017 17:35:03 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
Message-ID: <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>

Hi,
I confirm, backup tool are *not* available for CE. Only on commercial 
version.
Sorry for my previous suggestion, where I supposed backup was supported CE.

Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/29/2017 05:19 PM, Matt Schwinn wrote:
> Uh... no.? Not according to the handbook:
>
> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf 
> <https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf>
>
> 13.1.2 The built-in backup solution
> The sip:provider CE comes with an easy-to-use solution that creates 
> everyday backups of the most important data:
>
> If what Alex says is true then this needs to be removed from the handbook.
>
> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es 
> <mailto:rcuaresma at telcon.es>> wrote:
>
>     Hi Matt,
>
>     Backup tools are only available in PRO/CARRIER only. I attached a
>     e-mail from Alex Lutay that he confirm that.
>
>     Saludos,
>     Robert Cuaresma
>
>     El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>     Sending this out again.? Anyone?
>>
>>     ---
>>
>>     Hello All,
>>
>>     A couple of things that may have already been discussed.? I am
>>     running CE mr4.5.4 and have enabled the automatic backup feature
>>     as described in the handbook and it seems to not be working.? Can
>>     someone give me some advice.? The entire backuptools section was
>>     missing from my config.yml file so I added it manually.? I'll
>>     copy what I have below so you can take a look. I ran the command
>>     "ngcpcfg apply 'enabled the backup feature'" after making my
>>     change but it does not seem to be working as described.
>>
>>     Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>>     solution section refers to "C.1.3 backup tools section of the
>>     'NGCP configs overview'" which is actually located in section B.1.4.
>>
>>     Thank you all!
>>
>>
>>     ---My backuptools config section of config.yml---
>>     backuptools:
>>     ? cdrexport_backup:
>>     ??? enable: 'yes'
>>     ? etc_backup:
>>     ??? enable: 'yes'
>>     ? mail:
>>     ??? address: winwithschwinn at gmail.com
>>     <mailto:winwithschwinn at gmail.com>
>>     ??? error_subject: '[ngcp-backup] Problems detected during daily
>>     backup'
>>     ??? log_subject: '[ngcp-backup] Daily backup report'
>>     ??? send_errors: 'yes'
>>     ??? send_log: 'yes'
>>     ? mysql_backup:
>>     ??? enable: 'yes'
>>     ??? exclude_dbs: 'syslog sipstats information_schema'
>>     ? rotate_days: 7
>>     ? storage_dir: '/var/backup/ngcp_backup'
>>     ? temp_backup_dir: '/tmp/ngcp_backup'
>>     ------
>>
>>
>>     _______________________________________________
>>     Spce-user mailing list
>>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>     https://lists.sipwise.com/listinfo/spce-user
>>     <https://lists.sipwise.com/listinfo/spce-user>
>
>
>
>     ---------- Forwarded message ----------
>     From:?Alex Lutay <alutay at sipwise.com <mailto:alutay at sipwise.com>>
>     To:?Raul Alonso <raul.alonso at tpartner.net
>     <mailto:raul.alonso at tpartner.net>>, spce-user at lists.sipwise.com
>     <mailto:spce-user at lists.sipwise.com>
>     Cc:
>     Bcc:
>     Date:?Fri, 26 May 2017 12:45:32 +0200
>     Subject:?Re: [Spce-user] Backup is not integrated.
>     Hi,
>
>     As Andrew Pogrebennyk wrote in a thread,
>     backuptools is for PRO/Carrier only.
>
>     This is why CE validation doesn't like it.
>
>     On 05/25/2017 06:25 PM, Raul Alonso wrote:
>     > I have same issue, If I add the section according to the
>     documentation and execute: ngcpcfg --validate check
>     >
>     > 2017-05-25 18:23:46: Error: Invalid schema detected for
>     /etc/ngcp-config/config.yml
>     > /etc/ngcp-config/config.yml#0: INVALID
>     >? ?- [/backuptools] Unexpected key 'backuptools'
>
>     --
>     Alex Lutay
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>     <https://lists.sipwise.com/listinfo/spce-user>
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>     <https://lists.sipwise.com/listinfo/spce-user>
>
>
>
>
> -- 
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
> ????? and
> Company B
> 209-202-3329
> www.TCGTechLLC.com <http://www.TCGTechLLC.com>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/8c33fd54/attachment-0001.html>

From winwithschwinn at gmail.com  Wed Nov 29 11:37:57 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 08:37:57 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
Message-ID: <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>

Again, the user manual states that it 'is' included in CE.  Can we get
clarification on this please?

On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:

> Hi,
> I confirm, backup tool are *not* available for CE. Only on commercial
> version.
> Sorry for my previous suggestion, where I supposed backup was supported CE.
>
> Cheers,
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>
> Uh... no.  Not according to the handbook:
>
> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>
> 13.1.2 The built-in backup solution
> The sip:provider CE comes with an easy-to-use solution that creates
> everyday backups of the most important data:
>
> If what Alex says is true then this needs to be removed from the handbook.
>
> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
> wrote:
>
>> Hi Matt,
>>
>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>> from Alex Lutay that he confirm that.
>>
>> Saludos,
>> Robert Cuaresma
>>
>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>
>> Sending this out again.  Anyone?
>>
>> ---
>>
>> Hello All,
>>
>> A couple of things that may have already been discussed.  I am running CE
>> mr4.5.4 and have enabled the automatic backup feature as described in the
>> handbook and it seems to not be working.  Can someone give me some advice.
>> The entire backuptools section was missing from my config.yml file so I
>> added it manually.  I'll copy what I have below so you can take a look.  I
>> ran the command "ngcpcfg apply 'enabled the backup feature'" after making
>> my change but it does not seem to be working as described.
>>
>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>> overview'" which is actually located in section B.1.4.
>>
>> Thank you all!
>>
>>
>> ---My backuptools config section of config.yml---
>> backuptools:
>>   cdrexport_backup:
>>     enable: 'yes'
>>   etc_backup:
>>     enable: 'yes'
>>   mail:
>>     address: winwithschwinn at gmail.com
>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>     log_subject: '[ngcp-backup] Daily backup report'
>>     send_errors: 'yes'
>>     send_log: 'yes'
>>   mysql_backup:
>>     enable: 'yes'
>>     exclude_dbs: 'syslog sipstats information_schema'
>>   rotate_days: 7
>>   storage_dir: '/var/backup/ngcp_backup'
>>   temp_backup_dir: '/tmp/ngcp_backup'
>> ------
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Alex Lutay <alutay at sipwise.com>
>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>> Cc:
>> Bcc:
>> Date: Fri, 26 May 2017 12:45:32 +0200
>> Subject: Re: [Spce-user] Backup is not integrated.
>> Hi,
>>
>> As Andrew Pogrebennyk wrote in a thread,
>> backuptools is for PRO/Carrier only.
>>
>> This is why CE validation doesn't like it.
>>
>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>> > I have same issue, If I add the section according to the documentation
>> and execute: ngcpcfg --validate check
>> >
>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>> /etc/ngcp-config/config.yml
>> > /etc/ngcp-config/config.yml#0: INVALID
>> >   - [/backuptools] Unexpected key 'backuptools'
>>
>> --
>> Alex Lutay
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
>
> _______________________________________________
> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>


-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/7bcf234c/attachment-0001.html>

From manwe at sipdoc.net  Wed Nov 29 14:46:18 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Wed, 29 Nov 2017 20:46:18 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
Message-ID: <20171129204618.4c5fd521@multivac>

El Wed, 29 Nov 2017 11:50:26 +0100
Daniel Grotti <dgrotti at sipwise.com> escribi?:

> Hi Stefano,
> 
> You can configure as peer->subscriber.
> On SPCE 1:
> - you configure SPCE 2 as peering server with authenticatio
> 
> On SPCE 2:
> - you configure SPCE 1 as Subscriber.
> 
> 

would that setup work on both directions?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/db96cc24/attachment-0001.sig>

From barry at flanagan.ie  Wed Nov 29 15:09:06 2017
From: barry at flanagan.ie (Barry Flanagan)
Date: Wed, 29 Nov 2017 20:09:06 +0000
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <20171129204618.4c5fd521@multivac>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
Message-ID: <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>

On 29 November 2017 at 19:46, Jon Bonilla (Manwe) <manwe at sipdoc.net> wrote:

> El Wed, 29 Nov 2017 11:50:26 +0100
> Daniel Grotti <dgrotti at sipwise.com> escribi?:
>
> > Hi Stefano,
> >
> > You can configure as peer->subscriber.
> > On SPCE 1:
> > - you configure SPCE 2 as peering server with authenticatio
> >
> > On SPCE 2:
> > - you configure SPCE 1 as Subscriber.
> >
> >
>
> would that setup work on both directions?
>
>
>
I think you would also need to do the reverse as well, so both SPCE have a
peer to the other for outbound, and a subscriber for the inbound. Peers and
Subscribers would need to use authentication as mentioned above, so that
they don't get mixed up.

Alternatively, I think you can set allow_peer_relay to "yes" in
/etc/ngcp-config/config.yml which would allow a call to come in from one
peer and get sent out to another peer (based on routing rules), although
this only would work if you did not need to bill, as peer-to-peer does not
get billed.

-Barry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/6f3f3be1/attachment-0001.html>

From manwe at sipdoc.net  Wed Nov 29 15:49:43 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Wed, 29 Nov 2017 21:49:43 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
Message-ID: <20171129214943.3a6c60f9@multivac>

El Wed, 29 Nov 2017 20:09:06 +0000
Barry Flanagan <barry at flanagan.ie> escribi?:


> >
> >  
> I think you would also need to do the reverse as well, so both SPCE have a
> peer to the other for outbound, and a subscriber for the inbound. Peers and
> Subscribers would need to use authentication as mentioned above, so that
> they don't get mixed up.
> 
> Alternatively, I think you can set allow_peer_relay to "yes" in
> /etc/ngcp-config/config.yml which would allow a call to come in from one
> peer and get sent out to another peer (based on routing rules), although
> this only would work if you did not need to bill, as peer-to-peer does not
> get billed.
> 
>

If you set another system as peer and subscriber when an incoming call comes it
will be detected as peer and won't be authenticated. No need for authenticate
the peer, right?

Maybe it could work, yes. You would send via subscriber with permanent contact
and it would be detected as incoming form peer in the other side. No need for
enable_peer_relay in that case. 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/81e692b5/attachment-0001.sig>

From stefanormc at gmail.com  Wed Nov 29 15:58:15 2017
From: stefanormc at gmail.com (stefanormc)
Date: Wed, 29 Nov 2017 12:58:15 -0800
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <20171129214943.3a6c60f9@multivac>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
Message-ID: <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>

Hi all, thanks for the support.

Trial is working, tomorrow I?ll check in production. I don?t think you have
to setup 2 peers but I think you have to set all aliases subscriber side to
route calls correctly.

I?m using mr5.4.1
<https://centrale03.avanzati.it:1443/statistics/versions>
Please note that on this version peer_auth only works manually as described
on documentation

Thanks

Ciao

Stefano

On 29 November 2017 at 21:49:53, Jon Bonilla (Manwe) (manwe at sipdoc.net)
wrote:

El Wed, 29 Nov 2017 20:09:06 +0000
Barry Flanagan <barry at flanagan.ie> escribi?:


> >
> >
> I think you would also need to do the reverse as well, so both SPCE have
a
> peer to the other for outbound, and a subscriber for the inbound. Peers
and
> Subscribers would need to use authentication as mentioned above, so that
> they don't get mixed up.
>
> Alternatively, I think you can set allow_peer_relay to "yes" in
> /etc/ngcp-config/config.yml which would allow a call to come in from one
> peer and get sent out to another peer (based on routing rules), although
> this only would work if you did not need to bill, as peer-to-peer does
not
> get billed.
>
>

If you set another system as peer and subscriber when an incoming call
comes it
will be detected as peer and won't be authenticated. No need for
authenticate
the peer, right?

Maybe it could work, yes. You would send via subscriber with permanent
contact
and it would be detected as incoming form peer in the other side. No need
for
enable_peer_relay in that case.
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/ae25a0f3/attachment-0001.html>

From davidp at csr-online.net  Wed Nov 29 16:19:48 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Wed, 29 Nov 2017 21:19:48 +0000
Subject: [Spce-user] i can't create invoices help please
Message-ID: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>

I try with all reseller,s customers and the error always the same in version 5.5.1

In panel.log the error was:

Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""


Thank you very much



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355 ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From walter at myrepublic.net  Wed Nov 29 20:11:24 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 09:11:24 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
Message-ID: <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>

I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 

Yours sincerely,
Walter

> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
> 
>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>> Hi,
>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>> 
>> Cheers,
>> 
>>  -- 
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>> 
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>> 
>>> Uh... no.  Not according to the handbook:
>>> 
>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>> 
>>> 13.1.2 The built-in backup solution
>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>> 
>>> If what Alex says is true then this needs to be removed from the handbook.
>>> 
>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>> Hi Matt, 
>>>> 
>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>> 
>>>> Saludos,
>>>> Robert Cuaresma
>>>> 
>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>> Sending this out again.  Anyone?
>>>>> 
>>>>> ---
>>>>> 
>>>>> Hello All,
>>>>> 
>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>> 
>>>>> Also, the handbook for 4.5.4 under the 13.1.2                         The built-in backup solution section refers to                         "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>> 
>>>>> Thank you all!
>>>>> 
>>>>> 
>>>>> ---My backuptools config section of config.yml---
>>>>> backuptools:
>>>>>   cdrexport_backup:
>>>>>     enable: 'yes'
>>>>>   etc_backup:
>>>>>     enable: 'yes'
>>>>>   mail:
>>>>>     address: winwithschwinn at gmail.com
>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>     send_errors: 'yes'
>>>>>     send_log: 'yes'
>>>>>   mysql_backup:
>>>>>     enable: 'yes'
>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>   rotate_days: 7
>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>> ------
>>>>> 
>>>>> 
>>>>>  _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Alex Lutay <alutay at sipwise.com>
>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>> Cc: 
>>>> Bcc: 
>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>> Hi,
>>>> 
>>>> As Andrew Pogrebennyk wrote in a thread,
>>>> backuptools is for PRO/Carrier only.
>>>> 
>>>> This is why CE validation doesn't like it.
>>>> 
>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>> >
>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>> 
>>>> --
>>>> Alex Lutay
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Enjoy the day!
>>> Matt Schwinn
>>> TCG Technologies LLC 
>>>       and
>>> Company B
>>> 209-202-3329
>>> www.TCGTechLLC.com
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>> 
>> 
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>> 
> 
> 
> 
> -- 
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC 
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/8943c4c4/attachment-0001.html>

From winwithschwinn at gmail.com  Wed Nov 29 20:17:28 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 17:17:28 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
Message-ID: <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>

Hi Walter,

Did you have to do anything for it to work?

On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:

I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So
it is included afaik.

Yours sincerely,
Walter

On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:

Again, the user manual states that it 'is' included in CE.  Can we get
clarification on this please?

On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:

> Hi,
> I confirm, backup tool are *not* available for CE. Only on commercial
> version.
> Sorry for my previous suggestion, where I supposed backup was supported CE.
>
> Cheers,
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>
> Uh... no.  Not according to the handbook:
>
> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>
> 13.1.2 The built-in backup solution
> The sip:provider CE comes with an easy-to-use solution that creates
> everyday backups of the most important data:
>
> If what Alex says is true then this needs to be removed from the handbook.
>
> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
> wrote:
>
>> Hi Matt,
>>
>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>> from Alex Lutay that he confirm that.
>>
>> Saludos,
>> Robert Cuaresma
>>
>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>
>> Sending this out again.  Anyone?
>>
>> ---
>>
>> Hello All,
>>
>> A couple of things that may have already been discussed.  I am running CE
>> mr4.5.4 and have enabled the automatic backup feature as described in the
>> handbook and it seems to not be working.  Can someone give me some advice.
>> The entire backuptools section was missing from my config.yml file so I
>> added it manually.  I'll copy what I have below so you can take a look.  I
>> ran the command "ngcpcfg apply 'enabled the backup feature'" after making
>> my change but it does not seem to be working as described.
>>
>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>> overview'" which is actually located in section B.1.4.
>>
>> Thank you all!
>>
>>
>> ---My backuptools config section of config.yml---
>> backuptools:
>>   cdrexport_backup:
>>     enable: 'yes'
>>   etc_backup:
>>     enable: 'yes'
>>   mail:
>>     address: winwithschwinn at gmail.com
>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>     log_subject: '[ngcp-backup] Daily backup report'
>>     send_errors: 'yes'
>>     send_log: 'yes'
>>   mysql_backup:
>>     enable: 'yes'
>>     exclude_dbs: 'syslog sipstats information_schema'
>>   rotate_days: 7
>>   storage_dir: '/var/backup/ngcp_backup'
>>   temp_backup_dir: '/tmp/ngcp_backup'
>> ------
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Alex Lutay <alutay at sipwise.com>
>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>> Cc:
>> Bcc:
>> Date: Fri, 26 May 2017 12:45:32 +0200
>> Subject: Re: [Spce-user] Backup is not integrated.
>> Hi,
>>
>> As Andrew Pogrebennyk wrote in a thread,
>> backuptools is for PRO/Carrier only.
>>
>> This is why CE validation doesn't like it.
>>
>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>> > I have same issue, If I add the section according to the documentation
>> and execute: ngcpcfg --validate check
>> >
>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>> /etc/ngcp-config/config.yml
>> > /etc/ngcp-config/config.yml#0: INVALID
>> >   - [/backuptools] Unexpected key 'backuptools'
>>
>> --
>> Alex Lutay
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
>
> _______________________________________________
> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>


-- 
Enjoy the day!
Matt Schwinn
TCG Technologies LLC
      and
Company B
209-202-3329
www.TCGTechLLC.com

_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/52d82945/attachment-0001.html>

From walter at myrepublic.net  Wed Nov 29 20:30:51 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 09:30:51 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
Message-ID: <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>

Nope. I actually had to explicitly switch it off because it cleans up too much too early. 

Yours sincerely,
Walter

> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> Hi Walter,
> 
> Did you have to do anything for it to work?
> 
> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
> I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 
> 
> Yours sincerely,
> Walter
> 
>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>> 
>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>> 
>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>>> Hi,
>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>> 
>>> Cheers,
>>> 
>>>  -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>> 
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com
>>> Website: https://www.sipwise.com
>>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>> 
>>>> Uh... no.  Not according to the handbook:
>>>> 
>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>> 
>>>> 13.1.2 The built-in backup solution
>>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>> 
>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>> 
>>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>>> Hi Matt, 
>>>>> 
>>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>>> 
>>>>> Saludos,
>>>>> Robert Cuaresma
>>>>> 
>>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>>> Sending this out again.  Anyone?
>>>>>> 
>>>>>> ---
>>>>>> 
>>>>>> Hello All,
>>>>>> 
>>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>>> 
>>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>>> 
>>>>>> Thank you all!
>>>>>> 
>>>>>> 
>>>>>> ---My backuptools config section of config.yml---
>>>>>> backuptools:
>>>>>>   cdrexport_backup:
>>>>>>     enable: 'yes'
>>>>>>   etc_backup:
>>>>>>     enable: 'yes'
>>>>>>   mail:
>>>>>>     address: winwithschwinn at gmail.com
>>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>>     send_errors: 'yes'
>>>>>>     send_log: 'yes'
>>>>>>   mysql_backup:
>>>>>>     enable: 'yes'
>>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>>   rotate_days: 7
>>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>>> ------
>>>>>> 
>>>>>> 
>>>>>>  _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>>> 
>>>>> 
>>>>> ---------- Forwarded message ----------
>>>>> From: Alex Lutay <alutay at sipwise.com>
>>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>>> Cc: 
>>>>> Bcc: 
>>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>>> Hi,
>>>>> 
>>>>> As Andrew Pogrebennyk wrote in a thread,
>>>>> backuptools is for PRO/Carrier only.
>>>>> 
>>>>> This is why CE validation doesn't like it.
>>>>> 
>>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>>> >
>>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>>> 
>>>>> --
>>>>> Alex Lutay
>>>>> 
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>>> _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com
>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Enjoy the day!
>>>> Matt Schwinn
>>>> TCG Technologies LLC 
>>>>       and
>>>> Company B
>>>> 209-202-3329
>>>> www.TCGTechLLC.com
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>> 
>> 
>> 
>> 
>> -- 
>> Enjoy the day!
>> Matt Schwinn
>> TCG Technologies LLC 
>>       and
>> Company B
>> 209-202-3329
>> www.TCGTechLLC.com
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/97310803/attachment-0001.html>

From winwithschwinn at gmail.com  Wed Nov 29 20:53:18 2017
From: winwithschwinn at gmail.com (Matt Schwinn)
Date: Wed, 29 Nov 2017 17:53:18 -0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
Message-ID: <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>

How strange.  I didn't even have the backuptools section in my config.yml
file.

On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net> wrote:

> Nope. I actually had to explicitly switch it off because it cleans up too
> much too early.
>
> Yours sincerely,
> Walter
>
> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>
> Hi Walter,
>
> Did you have to do anything for it to work?
>
> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>
> I can tell you that on my 3.8 and 4.5 installations backup ?just works?.
> So it is included afaik.
>
> Yours sincerely,
> Walter
>
> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com>
> wrote:
>
> Again, the user manual states that it 'is' included in CE.  Can we get
> clarification on this please?
>
> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com>
> wrote:
>
>> Hi,
>> I confirm, backup tool are *not* available for CE. Only on commercial
>> version.
>> Sorry for my previous suggestion, where I supposed backup was supported
>> CE.
>>
>> Cheers,
>>
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>>
>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>
>> Uh... no.  Not according to the handbook:
>>
>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>
>> 13.1.2 The built-in backup solution
>> The sip:provider CE comes with an easy-to-use solution that creates
>> everyday backups of the most important data:
>>
>> If what Alex says is true then this needs to be removed from the handbook.
>>
>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es>
>> wrote:
>>
>>> Hi Matt,
>>>
>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail
>>> from Alex Lutay that he confirm that.
>>>
>>> Saludos,
>>> Robert Cuaresma
>>>
>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>
>>> Sending this out again.  Anyone?
>>>
>>> ---
>>>
>>> Hello All,
>>>
>>> A couple of things that may have already been discussed.  I am running
>>> CE mr4.5.4 and have enabled the automatic backup feature as described in
>>> the handbook and it seems to not be working.  Can someone give me some
>>> advice.  The entire backuptools section was missing from my config.yml file
>>> so I added it manually.  I'll copy what I have below so you can take a
>>> look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after
>>> making my change but it does not seem to be working as described.
>>>
>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup
>>> solution section refers to "C.1.3 backup tools section of the 'NGCP configs
>>> overview'" which is actually located in section B.1.4.
>>>
>>> Thank you all!
>>>
>>>
>>> ---My backuptools config section of config.yml---
>>> backuptools:
>>>   cdrexport_backup:
>>>     enable: 'yes'
>>>   etc_backup:
>>>     enable: 'yes'
>>>   mail:
>>>     address: winwithschwinn at gmail.com
>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>     send_errors: 'yes'
>>>     send_log: 'yes'
>>>   mysql_backup:
>>>     enable: 'yes'
>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>   rotate_days: 7
>>>   storage_dir: '/var/backup/ngcp_backup'
>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>> ------
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Alex Lutay <alutay at sipwise.com>
>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>> Cc:
>>> Bcc:
>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>> Subject: Re: [Spce-user] Backup is not integrated.
>>> Hi,
>>>
>>> As Andrew Pogrebennyk wrote in a thread,
>>> backuptools is for PRO/Carrier only.
>>>
>>> This is why CE validation doesn't like it.
>>>
>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>> > I have same issue, If I add the section according to the documentation
>>> and execute: ngcpcfg --validate check
>>> >
>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for
>>> /etc/ngcp-config/config.yml
>>> > /etc/ngcp-config/config.yml#0: INVALID
>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>
>>> --
>>> Alex Lutay
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>
>>
>> --
>> Enjoy the day!
>> Matt Schwinn
>> TCG Technologies LLC
>>       and
>> Company B
>> 209-202-3329
>> www.TCGTechLLC.com
>>
>>
>> _______________________________________________
>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
>>
>>
>
>
> --
> Enjoy the day!
> Matt Schwinn
> TCG Technologies LLC
>       and
> Company B
> 209-202-3329
> www.TCGTechLLC.com
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171129/01c75fb1/attachment-0001.html>

From walter at myrepublic.net  Wed Nov 29 21:24:49 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 10:24:49 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
References: <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
Message-ID: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>

They were in mine, but yes, if you installed a later 4.5 from scratch they are not there, but then if you copy them from another instance, things just start to magically work...



> On 30 Nov 2017, at 9:53 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
> 
> How strange.  I didn't even have the backuptools section in my config.yml file.
> 
> On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net <mailto:walter at myrepublic.net>> wrote:
> Nope. I actually had to explicitly switch it off because it cleans up too much too early. 
> 
> Yours sincerely,
> Walter
> 
> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>> wrote:
> 
>> Hi Walter,
>> 
>> Did you have to do anything for it to work?
>> 
>> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net <mailto:walter at myrepublic.net>> wrote:
>> I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 
>> 
>> Yours sincerely,
>> Walter
>> 
>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>> wrote:
>> 
>>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>>> 
>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>>> Hi,
>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>> 
>>> Cheers,
>>> 
>>>  -- 
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>> 
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
>>> Website: https://www.sipwise.com <https://www.sipwise.com/>
>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>> 
>>>> Uh... no.  Not according to the handbook:
>>>> 
>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf <https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf>
>>>> 
>>>> 13.1.2 The built-in backup solution
>>>> The sip:provider <> CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>> 
>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>> 
>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es <mailto:rcuaresma at telcon.es>> wrote:
>>>> Hi Matt, 
>>>> 
>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>> 
>>>> Saludos,
>>>> Robert Cuaresma
>>>> 
>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>> Sending this out again.  Anyone?
>>>>> 
>>>>> ---
>>>>> 
>>>>> Hello All,
>>>>> 
>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>> 
>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>> 
>>>>> Thank you all!
>>>>> 
>>>>> 
>>>>> ---My backuptools config section of config.yml---
>>>>> backuptools:
>>>>>   cdrexport_backup:
>>>>>     enable: 'yes'
>>>>>   etc_backup:
>>>>>     enable: 'yes'
>>>>>   mail:
>>>>>     address: winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>
>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>     send_errors: 'yes'
>>>>>     send_log: 'yes'
>>>>>   mysql_backup:
>>>>>     enable: 'yes'
>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>   rotate_days: 7
>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>> ------
>>>>> 
>>>>> 
>>>>>  _______________________________________________
>>>>> Spce-user mailing list
>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>>> 
>>>> 
>>>> 
>>>> ---------- Forwarded message ----------
>>>> From: Alex Lutay <alutay at sipwise.com <mailto:alutay at sipwise.com>>
>>>> To: Raul Alonso <raul.alonso at tpartner.net <mailto:raul.alonso at tpartner.net>>, spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>>>> Cc: 
>>>> Bcc: 
>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>> Hi,
>>>> 
>>>> As Andrew Pogrebennyk wrote in a thread,
>>>> backuptools is for PRO/Carrier only.
>>>> 
>>>> This is why CE validation doesn't like it.
>>>> 
>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>> >
>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>> 
>>>> --
>>>> Alex Lutay
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>>> 
>>>> 
>>>> 
>>>> 
>>>> -- 
>>>> Enjoy the day!
>>>> Matt Schwinn
>>>> TCG Technologies LLC 
>>>>       and
>>>> Company B
>>>> 209-202-3329
>>>> www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>>> 
>>> 
>>> 
>>> 
>>> -- 
>>> Enjoy the day!
>>> Matt Schwinn
>>> TCG Technologies LLC 
>>>       and
>>> Company B
>>> 209-202-3329
>>> www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>> https://lists.sipwise.com/listinfo/spce-user <https://lists.sipwise.com/listinfo/spce-user>
>> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/f4c3456d/attachment-0001.html>

From dgrotti at sipwise.com  Thu Nov 30 03:22:37 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 09:22:37 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
Message-ID: <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>

Hi Stefano,
you can just route calls to the other peer via subscribers aliases, indeed.


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/29/2017 09:58 PM, stefanormc wrote:
> Hi all, thanks for the support.
>
> Trial is working, tomorrow I?ll check in production. I don?t think you 
> have to setup 2 peers but I think you have to set all aliases 
> subscriber side to route calls correctly.
>
> I?m using mr5.4.1
> <https://centrale03.avanzati.it:1443/statistics/versions>
> Please note that on this version peer_auth only works manually as 
> described on documentation
>
> Thanks
>
> Ciao
>
> Stefano
>
> On 29 November 2017 at 21:49:53, Jon Bonilla (Manwe) (manwe at sipdoc.net 
> <mailto:manwe at sipdoc.net>) wrote:
>
>> El Wed, 29 Nov 2017 20:09:06 +0000
>> Barry Flanagan <barry at flanagan.ie <mailto:barry at flanagan.ie>> escribi?:
>>
>>
>> > >
>> > >
>> > I think you would also need to do the reverse as well, so both SPCE 
>> have a
>> > peer to the other for outbound, and a subscriber for the inbound. 
>> Peers and
>> > Subscribers would need to use authentication as mentioned above, so 
>> that
>> > they don't get mixed up.
>> >
>> > Alternatively, I think you can set allow_peer_relay to "yes" in
>> > /etc/ngcp-config/config.yml which would allow a call to come in 
>> from one
>> > peer and get sent out to another peer (based on routing rules), 
>> although
>> > this only would work if you did not need to bill, as peer-to-peer 
>> does not
>> > get billed.
>> >
>> >
>>
>> If you set another system as peer and subscriber when an incoming 
>> call comes it
>> will be detected as peer and won't be authenticated. No need for 
>> authenticate
>> the peer, right?
>>
>> Maybe it could work, yes. You would send via subscriber with 
>> permanent contact
>> and it would be detected as incoming form peer in the other side. No 
>> need for
>> enable_peer_relay in that case.
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/9dc8e8ad/attachment-0001.html>

From me at nevian.org  Thu Nov 30 04:13:57 2017
From: me at nevian.org (Serge S. Yuriev)
Date: Thu, 30 Nov 2017 12:13:57 +0300
Subject: [Spce-user] Backup... Second try
In-Reply-To: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
Message-ID: <83571512033237@web36o.yandex.ru>

An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/c3833bbf/attachment-0001.html>

From dgrotti at sipwise.com  Thu Nov 30 04:43:43 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 10:43:43 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <83571512033237@web36o.yandex.ru>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
Message-ID: <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>

Hi all,
Package ngcp-backup-tools, containing the backup feature is *not* part 
of CE and it is not covered by GPL licence, so this *should* not be 
present in any CE.
Starting from mr5.0 you will see backuptool section in your config.yml, 
this is on purpose and correct, since we are aligning configuration 
between PRO an CE. But if you change something there, nothing will 
happen, since there is no package installed.

Please check in your SPCE the following output from the command:

dpkg -l | grep backup-tools


If you get an output, please share it and then remove that package.
As far as we know from our internal checks, backup-tools package is not 
present at all in any CE repo, so we would really like to understand how 
and where you get that package.

Regarding Handbook saying backup script are included in CE, this is a 
wrong statement and we are going to fix it. Thanks for let us know.

Regards,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 10:13 AM, Serge S. Yuriev wrote:
> Hi,
>
> Strange my experience quite opposite - section does exists but backup 
> not working in 3.8,?4.5 and 5.x series..
>
> -- 
> Wbr, Serge via mobile
>
> 30.11.2017, 05:25, "Walter Klomp" <walter at myrepublic.net>:
>> They were in mine, but yes, if you installed a later 4.5 from scratch 
>> they are not there, but then if you copy them from another instance, 
>> things just start to magically work...
>>
>>
>>
>>> On 30 Nov 2017, at 9:53 AM, Matt Schwinn <winwithschwinn at gmail.com 
>>> <mailto:winwithschwinn at gmail.com>> wrote:
>>>
>>> How strange.? I didn't even have the backuptools section in my 
>>> config.yml file.
>>>
>>> On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net 
>>> <mailto:walter at myrepublic.net>> wrote:
>>>
>>>     Nope. I actually had to explicitly switch it off because it
>>>     cleans up too much too early.
>>>
>>>     Yours sincerely,
>>>     Walter
>>>
>>>     On 30 Nov 2017, at 9:17 AM, Matt Schwinn
>>>     <winwithschwinn at gmail.com <mailto:winwithschwinn at gmail.com>> wrote:
>>>
>>>>     Hi Walter,
>>>>
>>>>     Did you have to do anything for it to work?
>>>>
>>>>     On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net
>>>>     <mailto:walter at myrepublic.net>> wrote:
>>>>
>>>>         I can tell you that on my 3.8 and 4.5 installations backup
>>>>         ?just works?. So it is included afaik.
>>>>
>>>>         Yours sincerely,
>>>>         Walter
>>>>
>>>>         On 30 Nov 2017, at 12:37 AM, Matt Schwinn
>>>>         <winwithschwinn at gmail.com
>>>>         <mailto:winwithschwinn at gmail.com>> wrote:
>>>>
>>>>>         Again, the user manual states that it 'is' included in
>>>>>         CE.? Can we get clarification on this please?
>>>>>
>>>>>         On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti
>>>>>         <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>>>>>
>>>>>             Hi,
>>>>>             I confirm, backup tool are *not* available for CE.
>>>>>             Only on commercial version.
>>>>>             Sorry for my previous suggestion, where I supposed
>>>>>             backup was supported CE.
>>>>>
>>>>>             Cheers,
>>>>>
>>>>>             -- 
>>>>>             Daniel Grotti
>>>>>             Head of Customer Support
>>>>>             Sipwise GmbH, Campus 21/Europaring F15
>>>>>             AT-2345 Brunn am Gebirge
>>>>>
>>>>>             Office:+43(0)130120332 <tel:+43130120332>
>>>>>             Email:dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>
>>>>>             Website:https://www.sipwise.com <https://www.sipwise.com/>
>>>>>
>>>>>             On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>>>>             Uh... no.? Not according to the handbook:
>>>>>>
>>>>>>             https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>>>>             <https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf>
>>>>>>
>>>>>>             13.1.2 The built-in backup solution
>>>>>>             The sip:provider CE comes with an easy-to-use
>>>>>>             solution that creates everyday backups of the most
>>>>>>             important data:
>>>>>>
>>>>>>             If what Alex says is true then this needs to be
>>>>>>             removed from the handbook.
>>>>>>
>>>>>>             On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma
>>>>>>             <rcuaresma at telcon.es <mailto:rcuaresma at telcon.es>> wrote:
>>>>>>
>>>>>>                 Hi Matt,
>>>>>>
>>>>>>                 Backup tools are only available in PRO/CARRIER
>>>>>>                 only. I attached a e-mail from Alex Lutay that he
>>>>>>                 confirm that.
>>>>>>
>>>>>>                 Saludos,
>>>>>>                 Robert Cuaresma
>>>>>>
>>>>>>                 El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>>>>                 Sending this out again. Anyone?
>>>>>>>
>>>>>>>                 ---
>>>>>>>
>>>>>>>                 Hello All,
>>>>>>>
>>>>>>>                 A couple of things that may have already been
>>>>>>>                 discussed.? I am running CE mr4.5.4 and have
>>>>>>>                 enabled the automatic backup feature as
>>>>>>>                 described in the handbook and it seems to not be
>>>>>>>                 working.? Can someone give me some advice.? The
>>>>>>>                 entire backuptools section was missing from my
>>>>>>>                 config.yml file so I added it manually. I'll
>>>>>>>                 copy what I have below so you can take a look. I
>>>>>>>                 ran the command "ngcpcfg apply 'enabled the
>>>>>>>                 backup feature'" after making my change but it
>>>>>>>                 does not seem to be working as described.
>>>>>>>
>>>>>>>                 Also, the handbook for 4.5.4 under the 13.1.2
>>>>>>>                 The built-in backup solution section refers to
>>>>>>>                 "C.1.3 backup tools section of the 'NGCP configs
>>>>>>>                 overview'" which is actually located in section
>>>>>>>                 B.1.4.
>>>>>>>
>>>>>>>                 Thank you all!
>>>>>>>
>>>>>>>
>>>>>>>                 ---My backuptools config section of config.yml---
>>>>>>>                 backuptools:
>>>>>>>                 cdrexport_backup:
>>>>>>>                 ??? enable: 'yes'
>>>>>>>                 ? etc_backup:
>>>>>>>                 ??? enable: 'yes'
>>>>>>>                 ? mail:
>>>>>>>                 ??? address: winwithschwinn at gmail.com
>>>>>>>                 <mailto:winwithschwinn at gmail.com>
>>>>>>>                 error_subject: '[ngcp-backup] Problems detected
>>>>>>>                 during daily backup'
>>>>>>>                 log_subject: '[ngcp-backup] Daily backup report'
>>>>>>>                 send_errors: 'yes'
>>>>>>>                 ??? send_log: 'yes'
>>>>>>>                 mysql_backup:
>>>>>>>                 ??? enable: 'yes'
>>>>>>>                 exclude_dbs: 'syslog sipstats information_schema'
>>>>>>>                 ? rotate_days: 7
>>>>>>>                 ? storage_dir: '/var/backup/ngcp_backup'
>>>>>>>                 temp_backup_dir: '/tmp/ngcp_backup'
>>>>>>>                 ------
>>>>>>>
>>>>>>>
>>>>>>>                 _______________________________________________
>>>>>>>                 Spce-user mailing list
>>>>>>>                 Spce-user at lists.sipwise.com
>>>>>>>                 <mailto:Spce-user at lists.sipwise.com>
>>>>>>>                 https://lists.sipwise.com/listinfo/spce-user
>>>>>>>                 <https://lists.sipwise.com/listinfo/spce-user>
>>>>>>
>>>>>>
>>>>>>
>>>>>>                 ---------- Forwarded message ----------
>>>>>>                 From:?Alex Lutay <alutay at sipwise.com
>>>>>>                 <mailto:alutay at sipwise.com>>
>>>>>>                 To:?Raul Alonso <raul.alonso at tpartner.net
>>>>>>                 <mailto:raul.alonso at tpartner.net>>,
>>>>>>                 spce-user at lists.sipwise.com
>>>>>>                 <mailto:spce-user at lists.sipwise.com>
>>>>>>                 Cc:
>>>>>>                 Bcc:
>>>>>>                 Date:?Fri, 26 May 2017 12:45:32 +0200
>>>>>>                 Subject:?Re: [Spce-user] Backup is not integrated.
>>>>>>                 Hi,
>>>>>>
>>>>>>                 As Andrew Pogrebennyk wrote in a thread,
>>>>>>                 backuptools is for PRO/Carrier only.
>>>>>>
>>>>>>                 This is why CE validation doesn't like it.
>>>>>>
>>>>>>                 On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>>>                 > I have same issue, If I add the section
>>>>>>                 according to the documentation and execute:
>>>>>>                 ngcpcfg --validate check
>>>>>>                 >
>>>>>>                 > 2017-05-25 18:23:46: Error: Invalid schema
>>>>>>                 detected for /etc/ngcp-config/config.yml
>>>>>>                 > /etc/ngcp-config/config.yml#0: INVALID
>>>>>>                 >? ?- [/backuptools] Unexpected key 'backuptools'
>>>>>>
>>>>>>                 --
>>>>>>                 Alex Lutay
>>>>>>
>>>>>>                 _______________________________________________
>>>>>>                 Spce-user mailing list
>>>>>>                 Spce-user at lists.sipwise.com
>>>>>>                 <mailto:Spce-user at lists.sipwise.com>
>>>>>>                 https://lists.sipwise.com/listinfo/spce-user
>>>>>>                 <https://lists.sipwise.com/listinfo/spce-user>
>>>>>>
>>>>>>                 _______________________________________________
>>>>>>                 Spce-user mailing list
>>>>>>                 Spce-user at lists.sipwise.com
>>>>>>                 <mailto:Spce-user at lists.sipwise.com>
>>>>>>                 https://lists.sipwise.com/listinfo/spce-user
>>>>>>                 <https://lists.sipwise.com/listinfo/spce-user>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>             -- 
>>>>>>             Enjoy the day!
>>>>>>             Matt Schwinn
>>>>>>             TCG Technologies LLC
>>>>>>             ????? and
>>>>>>             Company B
>>>>>>             209-202-3329 <tel:209-202-3329>
>>>>>>             www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>>>>>
>>>>>>
>>>>>>             _______________________________________________
>>>>>>             Spce-user mailing list
>>>>>>             Spce-user at lists.sipwise.com
>>>>>>             <mailto:Spce-user at lists.sipwise.com>
>>>>>>             https://lists.sipwise.com/listinfo/spce-user
>>>>>>             <https://lists.sipwise.com/listinfo/spce-user>
>>>>>
>>>>>
>>>>>             _______________________________________________
>>>>>             Spce-user mailing list
>>>>>             Spce-user at lists.sipwise.com
>>>>>             <mailto:Spce-user at lists.sipwise.com>
>>>>>             https://lists.sipwise.com/listinfo/spce-user
>>>>>             <https://lists.sipwise.com/listinfo/spce-user>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>         -- 
>>>>>         Enjoy the day!
>>>>>         Matt Schwinn
>>>>>         TCG Technologies LLC
>>>>>         ????? and
>>>>>         Company B
>>>>>         209-202-3329 <tel:209-202-3329>
>>>>>         www.TCGTechLLC.com <http://www.tcgtechllc.com/>
>>>>>         _______________________________________________
>>>>>         Spce-user mailing list
>>>>>         Spce-user at lists.sipwise.com
>>>>>         <mailto:Spce-user at lists.sipwise.com>
>>>>>         https://lists.sipwise.com/listinfo/spce-user
>>>>>         <https://lists.sipwise.com/listinfo/spce-user>
>>>>
>>>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> https://lists.sipwise.com/listinfo/spce-user
>>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/02d3c06f/attachment-0001.html>

From manwe at sipdoc.net  Thu Nov 30 04:59:27 2017
From: manwe at sipdoc.net (Jon Bonilla (Manwe))
Date: Thu, 30 Nov 2017 10:59:27 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
 <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
Message-ID: <20171130105927.0e92108b@multivac>

El Thu, 30 Nov 2017 10:43:43 +0100
Daniel Grotti <dgrotti at sipwise.com> escribi?:

> Starting from mr5.0 you will see backuptool section in your config.yml, 
> this is on purpose and correct, since we are aligning configuration 
> between PRO an CE. But if you change something there, nothing will 
> happen, since there is no package installed.

What's the point of having yml sections in CE that won't work? I understand
that it's easier for developers but unless you create a pro.yml of something
you'll only confuse CE users who will configure disabled sections without
notice.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/0c3ec83e/attachment-0001.sig>

From walter at myrepublic.net  Thu Nov 30 05:08:34 2017
From: walter at myrepublic.net (Walter Klomp)
Date: Thu, 30 Nov 2017 18:08:34 +0800
Subject: [Spce-user] Backup... Second try
In-Reply-To: <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
 <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
Message-ID: <E55E249E-0896-441B-857C-02121D743E0E@myrepublic.net>

Yes, don?t have that package anywhere.  Probably I am confused with the sql backups that get generated and the cdr being exported and removed from sql server, cleanup tools...

Yours sincerely,

Walter Klomp


> On 30 Nov 2017, at 17:43, Daniel Grotti <dgrotti at sipwise.com> wrote:
> 
> Hi all,
> Package ngcp-backup-tools, containing the backup feature is *not* part of CE and it is not covered by GPL licence, so this *should* not be present in any CE.
> Starting from mr5.0 you will see backuptool section in your config.yml, this is on purpose and correct, since we are aligning configuration between PRO an CE. But if you change something there, nothing will happen, since there is no package installed.
> 
> Please check in your SPCE the following output from the command:
> 
> dpkg -l | grep backup-tools
> 
> 
> If you get an output, please share it and then remove that package.
> As far as we know from our internal checks, backup-tools package is not present at all in any CE repo, so we would really like to understand how and where you get that package.
> 
> Regarding Handbook saying backup script are included in CE, this is a wrong statement and we are going to fix it. Thanks for let us know.
> 
> Regards,
> 
>  -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
> 
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>> On 11/30/2017 10:13 AM, Serge S. Yuriev wrote:
>> Hi,
>> 
>> Strange my experience quite opposite - section does exists but backup not working in 3.8, 4.5 and 5.x series..
>> 
>> -- 
>> Wbr, Serge via mobile
>> 
>> 30.11.2017, 05:25, "Walter Klomp" <walter at myrepublic.net>:
>>> They were in mine, but yes, if you installed a later 4.5 from scratch they are not there, but then if you copy them from another instance, things just start to magically work...
>>> 
>>> 
>>> 
>>>> On 30 Nov 2017, at 9:53 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>>>> 
>>>> How strange.  I didn't even have the backuptools section in my config.yml file.
>>>> 
>>>> On Nov 29, 2017 5:30 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>>>> Nope. I actually had to explicitly switch it off because it cleans up too much too early. 
>>>> 
>>>> Yours sincerely,
>>>> Walter
>>>> 
>>>> On 30 Nov 2017, at 9:17 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>>>> 
>>>>> Hi Walter,
>>>>> 
>>>>> Did you have to do anything for it to work?
>>>>> 
>>>>> On Nov 29, 2017 5:11 PM, "Walter Klomp" <walter at myrepublic.net> wrote:
>>>>> I can tell you that on my 3.8 and 4.5 installations backup ?just works?. So it is included afaik. 
>>>>> 
>>>>> Yours sincerely,
>>>>> Walter
>>>>> 
>>>>> On 30 Nov 2017, at 12:37 AM, Matt Schwinn <winwithschwinn at gmail.com> wrote:
>>>>> 
>>>>>> Again, the user manual states that it 'is' included in CE.  Can we get clarification on this please?
>>>>>> 
>>>>>> On Wed, Nov 29, 2017 at 8:35 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
>>>>>> Hi,
>>>>>> I confirm, backup tool are *not* available for CE. Only on commercial version.
>>>>>> Sorry for my previous suggestion, where I supposed backup was supported CE.
>>>>>> 
>>>>>> Cheers,
>>>>>> 
>>>>>>  -- 
>>>>>> Daniel Grotti
>>>>>> Head of Customer Support
>>>>>> Sipwise GmbH, Campus 21/Europaring F15
>>>>>> AT-2345 Brunn am Gebirge
>>>>>> 
>>>>>> Office: +43(0)130120332
>>>>>> Email: dgrotti at sipwise.com
>>>>>> Website: https://www.sipwise.com
>>>>>>> On 11/29/2017 05:19 PM, Matt Schwinn wrote:
>>>>>>> 
>>>>>>> Uh... no.  Not according to the handbook:
>>>>>>> 
>>>>>>> https://www.sipwise.com/doc/mr4.5.4/handbook-ce.pdf
>>>>>>> 
>>>>>>> 13.1.2 The built-in backup solution
>>>>>>> The sip:provider CE comes with an easy-to-use solution that creates everyday backups of the most important data:
>>>>>>> 
>>>>>>> If what Alex says is true then this needs to be removed from the handbook.
>>>>>>> 
>>>>>>> On Tue, Nov 28, 2017 at 11:33 AM, Robert Cuaresma <rcuaresma at telcon.es> wrote:
>>>>>>> Hi Matt, 
>>>>>>> 
>>>>>>> Backup tools are only available in PRO/CARRIER only. I attached a e-mail from Alex Lutay that he confirm that.
>>>>>>> 
>>>>>>> Saludos,
>>>>>>> Robert Cuaresma
>>>>>>> 
>>>>>>> El 22/11/2017 a las 2:20, Matt Schwinn escribi?:
>>>>>>>> Sending this out again.  Anyone?
>>>>>>>> 
>>>>>>>> ---
>>>>>>>> 
>>>>>>>> Hello All,
>>>>>>>> 
>>>>>>>> A couple of things that may have already been discussed.  I am running CE mr4.5.4 and have enabled the automatic backup feature as described in the handbook and it seems to not be working.  Can someone give me some advice.  The entire backuptools section was missing from my config.yml file so I added it manually.  I'll copy what I have below so you can take a look.  I ran the command "ngcpcfg apply 'enabled the backup feature'" after making my change but it does not seem to be working as described.
>>>>>>>> 
>>>>>>>> Also, the handbook for 4.5.4 under the 13.1.2 The built-in backup solution section refers to "C.1.3 backup tools section of the 'NGCP configs overview'" which is actually located in section B.1.4.
>>>>>>>> 
>>>>>>>> Thank you all!
>>>>>>>> 
>>>>>>>> 
>>>>>>>> ---My backuptools config section of config.yml---
>>>>>>>> backuptools:
>>>>>>>>   cdrexport_backup:
>>>>>>>>     enable: 'yes'
>>>>>>>>   etc_backup:
>>>>>>>>     enable: 'yes'
>>>>>>>>   mail:
>>>>>>>>     address: winwithschwinn at gmail.com
>>>>>>>>     error_subject: '[ngcp-backup] Problems detected during daily backup'
>>>>>>>>     log_subject: '[ngcp-backup] Daily backup report'
>>>>>>>>     send_errors: 'yes'
>>>>>>>>     send_log: 'yes'
>>>>>>>>   mysql_backup:
>>>>>>>>     enable: 'yes'
>>>>>>>>     exclude_dbs: 'syslog sipstats information_schema'
>>>>>>>>   rotate_days: 7
>>>>>>>>   storage_dir: '/var/backup/ngcp_backup'
>>>>>>>>   temp_backup_dir: '/tmp/ngcp_backup'
>>>>>>>> ------
>>>>>>>> 
>>>>>>>> 
>>>>>>>>  _______________________________________________
>>>>>>>> Spce-user mailing list
>>>>>>>> Spce-user at lists.sipwise.com
>>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> ---------- Forwarded message ----------
>>>>>>> From: Alex Lutay <alutay at sipwise.com>
>>>>>>> To: Raul Alonso <raul.alonso at tpartner.net>, spce-user at lists.sipwise.com
>>>>>>> Cc: 
>>>>>>> Bcc: 
>>>>>>> Date: Fri, 26 May 2017 12:45:32 +0200
>>>>>>> Subject: Re: [Spce-user] Backup is not integrated.
>>>>>>> Hi,
>>>>>>> 
>>>>>>> As Andrew Pogrebennyk wrote in a thread,
>>>>>>> backuptools is for PRO/Carrier only.
>>>>>>> 
>>>>>>> This is why CE validation doesn't like it.
>>>>>>> 
>>>>>>> On 05/25/2017 06:25 PM, Raul Alonso wrote:
>>>>>>> > I have same issue, If I add the section according to the documentation and execute: ngcpcfg --validate check
>>>>>>> >
>>>>>>> > 2017-05-25 18:23:46: Error: Invalid schema detected for /etc/ngcp-config/config.yml
>>>>>>> > /etc/ngcp-config/config.yml#0: INVALID
>>>>>>> >   - [/backuptools] Unexpected key 'backuptools'
>>>>>>> 
>>>>>>> --
>>>>>>> Alex Lutay
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> -- 
>>>>>>> Enjoy the day!
>>>>>>> Matt Schwinn
>>>>>>> TCG Technologies LLC 
>>>>>>>       and
>>>>>>> Company B
>>>>>>> 209-202-3329
>>>>>>> www.TCGTechLLC.com
>>>>>>> 
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Spce-user mailing list
>>>>>>> Spce-user at lists.sipwise.com
>>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> -- 
>>>>>> Enjoy the day!
>>>>>> Matt Schwinn
>>>>>> TCG Technologies LLC 
>>>>>>       and
>>>>>> Company B
>>>>>> 209-202-3329
>>>>>> www.TCGTechLLC.com
>>>>>> _______________________________________________
>>>>>> Spce-user mailing list
>>>>>> Spce-user at lists.sipwise.com
>>>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>> 
>>> 
>>> 
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>> 
>> 
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> https://lists.sipwise.com/listinfo/spce-user
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/a9946294/attachment-0001.html>

From rabs at dimension-virtual.com  Thu Nov 30 04:57:35 2017
From: rabs at dimension-virtual.com (=?utf-8?B?UmHDumw=?= Alexis Betancor Santana)
Date: Thu, 30 Nov 2017 10:57:35 +0100 (CET)
Subject: [Spce-user] Move scubscriber to another customer
In-Reply-To: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
References: <35cabefed0156bf2ac4323587728db87@iena-ridenz.eu.org>
Message-ID: <900665871.324104.1512035855978.JavaMail.zimbra@dimension-virtual.com>

You could do it manually on the DB, but not throught the API or the NGCP Panel

----- Mensaje original -----
> De: "Oleg" <spce at irg-x.net>
> Para: spce-user at lists.sipwise.com
> Enviados: Martes, 21 de Noviembre 2017 17:47:03
> Asunto: [Spce-user] Move scubscriber to another customer

> Hello everyone,
> 
> I was wandering if there is a way to move a subscriber from one Customer
> to another (within Sipwise). I was about to 'terminate' it under one
> customer to 'create' it under another. Is there a better way?
> 
> Thanks.
> 
> Oleg
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
(null)


From dgrotti at sipwise.com  Thu Nov 30 05:29:35 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:29:35 +0100
Subject: [Spce-user] Backup... Second try
In-Reply-To: <20171130105927.0e92108b@multivac>
References: <10E50285-7B7C-48DC-BC43-85F78D38312B@myrepublic.net>
 <CAMi8z0h-a7SNS-MZMOb99NCR12KeB7kB7gHvdgY_o1C2FtFbhg@mail.gmail.com>
 <d78cc17b-eaa6-23d2-8a52-ff37bb0a520f@telcon.es>
 <CAMi8z0hGmDzy0BOvE7uF=BZi6PVTLpHn9vOUDMkkHsormYc1eQ@mail.gmail.com>
 <4f0cd5d4-862c-fffe-c81f-200e3c8a1895@sipwise.com>
 <CAMi8z0hua8HLZZm7cm3mVUnzD1uJ5N-AfcRC++7D=_deqRObfg@mail.gmail.com>
 <21D88D57-8EA7-4776-A8A7-4C1F6DAE6077@myrepublic.net>
 <CAMi8z0jiqW5DFUEKedhM9cM_-XLotHYZ4rQyZUME10BgfoQF8w@mail.gmail.com>
 <CAMi8z0j_PX0gU+5++p-VrFF7PAirovcR5ov4UfCSByYVHui=Zw@mail.gmail.com>
 <E7D6B88A-150E-45F8-8191-E2915AC66C0D@myrepublic.net>
 <CAMi8z0ib+BPhKgCRF5b9fZ6hBAH2M4gr+5Up_M2+p4eD_opzLQ@mail.gmail.com>
 <83571512033237@web36o.yandex.ru>
 <3e89ed1b-a9d1-72d5-f0c9-a09a0940e708@sipwise.com>
 <20171130105927.0e92108b@multivac>
Message-ID: <d6d1f7e1-6c98-aa22-8dd5-038a4b82c052@sipwise.com>

Hi Jon,
that's the reason.
In future we will let you able to understand what section is Commercial 
only and what not.

Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 10:59 AM, Jon Bonilla (Manwe) wrote:
> El Thu, 30 Nov 2017 10:43:43 +0100
> Daniel Grotti <dgrotti at sipwise.com> escribi?:
>
>> Starting from mr5.0 you will see backuptool section in your config.yml,
>> this is on purpose and correct, since we are aligning configuration
>> between PRO an CE. But if you change something there, nothing will
>> happen, since there is no package installed.
> What's the point of having yml sections in CE that won't work? I understand
> that it's easier for developers but unless you create a pro.yml of something
> you'll only confuse CE users who will configure disabled sections without
> notice.
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/4718cd90/attachment-0001.html>

From stefanormc at gmail.com  Thu Nov 30 05:29:56 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 02:29:56 -0800
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
Message-ID: <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>

Hi

it?s not working as I expected. Peer is registered to subscriber but I get
No PSTN Available response:

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:3355416588 at d.voceblu.it;user=phone F=
sip:0118118673 at d.voceblu.it T=sip:3355416588 at d.voceblu.it;user=phone IP=
172.31.255.180:2051 (127.0.0.1:5060) ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: IMS marker,
s:ims_role='<null>', s:caller_uuid='f091ad4c-c8a2-42e4-8fae-bcba92b63fb2',
s:callee_uuid='<null>', s:acc_caller_user='0118118673',
s:acc_caller_domain='d.voceblu.it'  - R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Dialog managed,
lua_dlg_callid:[3c4632c304e2-1vukdq0ac0ql at snom190] - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: User-Provided CLI
'0118118673' taken from From-User - R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: User-provided CLI
'0118118673' rejected, using network-provided CLI '390118118673' - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Setting '
390118118673 at d.voceblu.it' as initiating user-provided CLI - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Setting '
390118118673 at d.voceblu.it' as initiating network-provided CLI - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Callee is not local
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Call to SIP Peering
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Load gws matching
calling part 'sip:390118118673 at d.voceblu.it' and called user '3355416588'
and called part 'sip:3355416588 at d.voceblu.it;user=phone' - R=
sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: ERROR: <script>: No PSTN gateways
available - R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

Nov 30 11:15:35 centrale proxy[4776]: NOTICE: <script>: Setting acc
source-leg for uuid 'f091ad4c-c8a2-42e4-8fae-bcba92b63fb2':
'f091ad4c-c8a2-42e4-8fae-bcba92b63fb2|0118118673|d.voceblu.it|390118118673||Associazione
Vivere|170|||0|call|172.31.255.180|1512036935.048282||||||||||||390118118673|'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

If I check with the ?call routing tool? I get this:

found caller subscriber '0118118673 at d.voceblu.it' with id 178
call from 0118118673 using subscriber '0118118673 at d.voceblu.it' id 178
no caller subscriber/domain rewrite rule sets were found
caller 0118118673 is rejected as it does not match subscriber's
'allowed_clis'
'allowed_cli' reject policy is 'override_by_usernpn', taken from 'cli'
390118118673
callee subscriber lookup based on 3355416588
no callee subscriber found, performing peer lookup with caller uri
390118118673 at d.voceblu.it and callee uri 3355416588 and callee 3355416588
no callee peers found

The CLI is in the allowed_cli list of the subscriber

what am I doing wrong?

thanks

stefano

Il giorno 30 novembre 2017 @ 09:22:50, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
you can just route calls to the other peer via subscribers aliases, indeed.


--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/29/2017 09:58 PM, stefanormc wrote:

Hi all, thanks for the support.

Trial is working, tomorrow I?ll check in production. I don?t think you have
to setup 2 peers but I think you have to set all aliases subscriber side to
route calls correctly.

I?m using mr5.4.1
<https://centrale03.avanzati.it:1443/statistics/versions>
Please note that on this version peer_auth only works manually as described
on documentation

Thanks

Ciao

Stefano

On 29 November 2017 at 21:49:53, Jon Bonilla (Manwe) (manwe at sipdoc.net)
wrote:

El Wed, 29 Nov 2017 20:09:06 +0000
Barry Flanagan <barry at flanagan.ie> escribi?:


> >
> >
> I think you would also need to do the reverse as well, so both SPCE have a
> peer to the other for outbound, and a subscriber for the inbound. Peers
and
> Subscribers would need to use authentication as mentioned above, so that
> they don't get mixed up.
>
> Alternatively, I think you can set allow_peer_relay to "yes" in
> /etc/ngcp-config/config.yml which would allow a call to come in from one
> peer and get sent out to another peer (based on routing rules), although
> this only would work if you did not need to bill, as peer-to-peer does not
> get billed.
>
>

If you set another system as peer and subscriber when an incoming call
comes it
will be detected as peer and won't be authenticated. No need for
authenticate
the peer, right?

Maybe it could work, yes. You would send via subscriber with permanent
contact
and it would be detected as incoming form peer in the other side. No need
for
enable_peer_relay in that case.
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/31957824/attachment-0001.html>

From dgrotti at sipwise.com  Thu Nov 30 05:31:59 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:31:59 +0100
Subject: [Spce-user] connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
Message-ID: <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>

Hi,
problem is that you do not have a peering rule matching the called (anc 
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least 
created the "catch-all" rule?

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it 
> <mailto:sip%3A390118118673 at d.voceblu.it>' and called user '3355416588' 
> and called part 'sip:3355416588 at d.voceblu.it 
> <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' - 
> R=sip:3355416588 at d.voceblu.it 
> <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone 
> ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/bf643947/attachment-0001.html>

From ipeshinskaya at sipwise.com  Thu Nov 30 05:35:32 2017
From: ipeshinskaya at sipwise.com (Irina Peshinskaya)
Date: Thu, 30 Nov 2017 12:35:32 +0200
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
Message-ID: <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>

Dear David,

We have released a hotfix for this issue.
Kindly find the fix in the ngcp-panel mr5.5.1.5

Best regards,
Irina Peshinskaya

On 29.11.2017 23:19, David | csr-online SPAIN wrote:
> I try with all reseller,s customers and the error always the same in version 5.5.1
>
> In panel.log the error was:
>
> Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
>
>
> Thank you very much
>
>
>
> Cordialment | Atentamente | Sincerely
> David Pablo Mitchell
> CTO
>
> CSR ONLINE
> Movil: +34 658174990
> Tel.Oficina:+34 931860160 / +34 902056355 ext.101
> Mail: davidp at csr-online.net
> Web: www.csr-online.net
> You run your business, we run your IT.
>
>
> La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user




From davidp at csr-online.net  Thu Nov 30 05:41:21 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 10:41:21 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
Message-ID: <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>

Sorry for this question what steps i do to install/upgrade to the fix?

Thank you


El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

    Dear David,

    We have released a hotfix for this issue.
    Kindly find the fix in the ngcp-panel mr5.5.1.5

    Best regards,
    Irina Peshinskaya

    On 29.11.2017 23:19, David | csr-online SPAIN wrote:
    > I try with all reseller,s customers and the error always the same in version 5.5.1
    >
    > In panel.log the error was:
    >
    > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
    >
    >
    > Thank you very much
    >
    >
    >
    > Cordialment | Atentamente | Sincerely
    > David Pablo Mitchell
    > CTO
    >
    > CSR ONLINE
    > Movil: +34 658174990
    > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
    > Mail: davidp at csr-online.net
    > Web: www.csr-online.net
    > You run your business, we run your IT.
    >
    >
    > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    > _______________________________________________
    > Spce-user mailing list
    > Spce-user at lists.sipwise.com
    > https://lists.sipwise.com/listinfo/spce-user





Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From ipeshinskaya at sipwise.com  Thu Nov 30 05:44:44 2017
From: ipeshinskaya at sipwise.com (Irina Peshinskaya)
Date: Thu, 30 Nov 2017 12:44:44 +0200
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
Message-ID: <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>

Dear David,

you need to upgrade ngcp-panel with command:

         apt-get install ngcp-panel

and after that restart ngcp-panel service:

         service ngcp-panel restart

Best regards,
Irina Peshinskaya

On 30.11.2017 12:41, David | csr-online SPAIN wrote:
> Sorry for this question what steps i do to install/upgrade to the fix?
>
> Thank you
>
>
> El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
>
>      Dear David,
>
>      We have released a hotfix for this issue.
>      Kindly find the fix in the ngcp-panel mr5.5.1.5
>
>      Best regards,
>      Irina Peshinskaya
>
>      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
>      > I try with all reseller,s customers and the error always the same in version 5.5.1
>      >
>      > In panel.log the error was:
>      >
>      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
>      >
>      >
>      > Thank you very much
>      >
>      >
>      >
>      > Cordialment | Atentamente | Sincerely
>      > David Pablo Mitchell
>      > CTO
>      >
>      > CSR ONLINE
>      > Movil: +34 658174990
>      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
>      > Mail: davidp at csr-online.net
>      > Web: www.csr-online.net
>      > You run your business, we run your IT.
>      >
>      >
>      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
>      > _______________________________________________
>      > Spce-user mailing list
>      > Spce-user at lists.sipwise.com
>      > https://lists.sipwise.com/listinfo/spce-user
>
>
>
>
>
> Cordialment | Atentamente | Sincerely
> David Pablo Mitchell
> CTO
>
> CSR ONLINE
> Movil: +34 658174990
> Tel.Oficina:+34 931860160 / +34 902056355  ext.101
> Mail: davidp at csr-online.net
> Web: www.csr-online.net
> You run your business, we run your IT.
>
>
> La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.




From davidp at csr-online.net  Thu Nov 30 05:45:22 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 10:45:22 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
Message-ID: <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>

Thanks a lot i try

El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

    Dear David,

    you need to upgrade ngcp-panel with command:

             apt-get install ngcp-panel

    and after that restart ngcp-panel service:

             service ngcp-panel restart

    Best regards,
    Irina Peshinskaya

    On 30.11.2017 12:41, David | csr-online SPAIN wrote:
    > Sorry for this question what steps i do to install/upgrade to the fix?
    >
    > Thank you
    >
    >
    > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
    >
    >      Dear David,
    >
    >      We have released a hotfix for this issue.
    >      Kindly find the fix in the ngcp-panel mr5.5.1.5
    >
    >      Best regards,
    >      Irina Peshinskaya
    >
    >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
    >      > I try with all reseller,s customers and the error always the same in version 5.5.1
    >      >
    >      > In panel.log the error was:
    >      >
    >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
    >      >
    >      >
    >      > Thank you very much
    >      >
    >      >
    >      >
    >      > Cordialment | Atentamente | Sincerely
    >      > David Pablo Mitchell
    >      > CTO
    >      >
    >      > CSR ONLINE
    >      > Movil: +34 658174990
    >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
    >      > Mail: davidp at csr-online.net
    >      > Web: www.csr-online.net
    >      > You run your business, we run your IT.
    >      >
    >      >
    >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    >      > _______________________________________________
    >      > Spce-user mailing list
    >      > Spce-user at lists.sipwise.com
    >      > https://lists.sipwise.com/listinfo/spce-user
    >
    >
    >
    >
    >
    > Cordialment | Atentamente | Sincerely
    > David Pablo Mitchell
    > CTO
    >
    > CSR ONLINE
    > Movil: +34 658174990
    > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    > Mail: davidp at csr-online.net
    > Web: www.csr-online.net
    > You run your business, we run your IT.
    >
    >
    > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From dgrotti at sipwise.com  Thu Nov 30 05:53:17 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:53:17 +0100
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
Message-ID: <54be7139-33a4-35e0-e11e-4a8ccf28b628@sipwise.com>

David,
you need to do:

apt-get update
apt-get install ngcp-panel
ngcpcfg apply 'commit mesasge'

or better update to latest hotfixes:

apt-get update && apt-get upgrade && \
ngcp-update-db-schema && ngcp-update-cfg-schema && \
ngcpcfg apply 'commit message'

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:45 AM, David | csr-online SPAIN wrote:
> Thanks a lot i try
>
> El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
>
>      Dear David,
>
>      you need to upgrade ngcp-panel with command:
>
>               apt-get install ngcp-panel
>
>      and after that restart ngcp-panel service:
>
>               service ngcp-panel restart
>
>      Best regards,
>      Irina Peshinskaya
>
>      On 30.11.2017 12:41, David | csr-online SPAIN wrote:
>      > Sorry for this question what steps i do to install/upgrade to the fix?
>      >
>      > Thank you
>      >
>      >
>      > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
>      >
>      >      Dear David,
>      >
>      >      We have released a hotfix for this issue.
>      >      Kindly find the fix in the ngcp-panel mr5.5.1.5
>      >
>      >      Best regards,
>      >      Irina Peshinskaya
>      >
>      >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
>      >      > I try with all reseller,s customers and the error always the same in version 5.5.1
>      >      >
>      >      > In panel.log the error was:
>      >      >
>      >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
>      >      >
>      >      >
>      >      > Thank you very much
>      >      >
>      >      >
>      >      >
>      >      > Cordialment | Atentamente | Sincerely
>      >      > David Pablo Mitchell
>      >      > CTO
>      >      >
>      >      > CSR ONLINE
>      >      > Movil: +34 658174990
>      >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
>      >      > Mail: davidp at csr-online.net
>      >      > Web: www.csr-online.net
>      >      > You run your business, we run your IT.
>      >      >
>      >      >
>      >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
>      >      > _______________________________________________
>      >      > Spce-user mailing list
>      >      > Spce-user at lists.sipwise.com
>      >      > https://lists.sipwise.com/listinfo/spce-user
>      >
>      >
>      >
>      >
>      >
>      > Cordialment | Atentamente | Sincerely
>      > David Pablo Mitchell
>      > CTO
>      >
>      > CSR ONLINE
>      > Movil: +34 658174990
>      > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
>      > Mail: davidp at csr-online.net
>      > Web: www.csr-online.net
>      > You run your business, we run your IT.
>      >
>      >
>      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
>
>
>
>
>
> Cordialment | Atentamente | Sincerely
> David Pablo Mitchell
> CTO
>
> CSR ONLINE
> Movil: +34 658174990
> Tel.Oficina:+34 931860160 / +34 902056355  ext.101
> Mail: davidp at csr-online.net
> Web: www.csr-online.net
> You run your business, we run your IT.
>
>
> La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user




From stefanormc at gmail.com  Thu Nov 30 05:54:08 2017
From: stefanormc at gmail.com (stefanormc at gmail.com)
Date: Thu, 30 Nov 2017 11:54:08 +0100
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
Message-ID: <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>

An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/10958bcd/attachment-0001.html>

From dgrotti at sipwise.com  Thu Nov 30 05:59:23 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 11:59:23 +0100
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
Message-ID: <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
>     Hi,
>     problem is that you do not have a peering rule matching the called
>     (anc callind) part, see below.
>     Please check your peering rules in your peerin server. Have you at
>     least created the "catch-all" rule?
>
>     -- 
>     Daniel Grotti
>     Head of Customer Support
>     Sipwise GmbH, Campus 21/Europaring F15
>     AT-2345 Brunn am Gebirge
>
>     Office: +43(0)130120332
>     Email:dgrotti at sipwise.com
>     Website:https://www.sipwise.com
>
>     On 11/30/2017 11:29 AM, stefanormc wrote:
>>     Load gws matching calling part 'sip:390118118673 at d.voceblu.it
>>     <mailto:sip%3A390118118673 at d.voceblu.it>' and called user
>>     '3355416588' and called part 'sip:3355416588 at d.voceblu.it
>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' -
>>     R=sip:3355416588 at d.voceblu.it
>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone
>>     ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/9d861ae3/attachment-0001.html>

From stefanormc at gmail.com  Thu Nov 30 06:32:34 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 03:32:34 -0800
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
Message-ID: <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>

There is no rule in ngcp-sercmd proxy lcr.dump_rules

Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 9

prefix:

from_uri: @digi.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 3

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 7

prefix:

from_uri: @voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

{

lcr_id: 1

rule_id: 6

prefix:

from_uri: old at d.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 4

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 4

prefix:

from_uri: @geva.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

0

centrale:~#


But there is in web interface:

#PrefixCaller PatternStateDescriptionPeer GroupPeer NamePeer HostPeer IPPeer
StatePriorityWeight
4 @geva.voceblu.it 1 TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
<https://centrale.avanzati.it:1443/peering/2/rules/4/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/servers/7/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/rules/4/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
6 ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
94.125.235.56 1 1 1
<https://centrale.avanzati.it:1443/peering/6/rules/6/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/servers/13/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/rules/6/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
7 @voceblu.it 1 TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
<https://centrale.avanzati.it:1443/peering/2/rules/7/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/servers/7/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/2/rules/7/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
8 @v.voceblu.it 1 centrale03 centrale03 94.125.235.56 1 1 1
<https://centrale.avanzati.it:1443/peering/6/rules/8/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/servers/13/edit?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
<https://centrale.avanzati.it:1443/peering/6/rules/8/delete?back=https%3A%2F%2Fcentrale.avanzati.it%3A1443%2Fpeeringoverview>
9 @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel
diretto Digitel
diretto voip.digitelitalia.it 109.238.17.166 1 1 1


On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com) wrote:

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:

There is a rule catching all d.voceblu.it


-------- Messaggio originale --------
Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
Da: Daniel Grotti
A: stefanormc ,spce-user at lists.sipwise.com
CC:


Hi,
problem is that you do not have a peering rule matching the called (anc
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least
created the "catch-all" rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:

Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/71213aa8/attachment-0001.html>

From dgrotti at sipwise.com  Thu Nov 30 06:37:19 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 12:37:19 +0100
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
Message-ID: <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>

Try to run:

ngcp-sercmd proxy lcr.reload

and then again:

ngcp-sercmd proxy lcr.dump_rules

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 12:32 PM, stefanormc wrote:
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 
> 93-57-17-112.ip162.fastwebnet.it <http://93-57-17-112.ip162.fastwebnet.it>
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it <http://digi.voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it <http://voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it <mailto:old at d.voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it <http://geva.voceblu.it>
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
>
> But there is in web interface:
>
> # 	Prefix 	Caller Pattern 	State 	Description 	Peer Group 	Peer Name 
> Peer Host 	Peer IP 	Peer State 	Priority 	Weight 	
> 4 	
> 	@geva.voceblu.it <http://geva.voceblu.it> 	1 	
> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
> 1 	2 	1 	
> 6 	
> 	^d\.voceblu\.it$ 	1 	seleziona numeri digitel 	centrale03 	centrale03 	
> 	94.125.235.56 	1 	1 	1 	
> 7 	
> 	@voceblu.it <http://voceblu.it> 	1 	
> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
> 1 	2 	1 	
> 8 	
> 	@v.voceblu.it <http://v.voceblu.it> 	1 	
> 	centrale03 	centrale03 	
> 	94.125.235.56 	1 	1 	1 	
> 9 	
> 	@digi.voceblu.it <http://digi.voceblu.it> 	1 	seleziona tutti quelli 
> diretti digitel 	Digitel diretto 	Digitel diretto 
> voip.digitelitalia.it <http://voip.digitelitalia.it> 	109.238.17.166 
> 1 	1 	1 	
>
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com 
> <mailto:dgrotti at sipwise.com>) wrote:
>
>> it seems you do not have it.
>> Please try to re-save the rule, and also do:
>>
>> ngcp-sercmd proxy lcr.dump_gws
>> ngcp-sercmd proxy lcr.dump_rules
>>
>>
>> Do you see your peer there and the rule?
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email:dgrotti at sipwise.com
>> Website:https://www.sipwise.com
>> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>>> There is a rule catching all d.voceblu.it <http://d.voceblu.it>
>>>
>>>
>>> -------- Messaggio originale --------
>>> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
>>> Da: Daniel Grotti
>>> A: stefanormc ,spce-user at lists.sipwise.com
>>> CC:
>>>
>>>
>>>     Hi,
>>>     problem is that you do not have a peering rule matching the
>>>     called (anc callind) part, see below.
>>>     Please check your peering rules in your peerin server. Have you
>>>     at least created the "catch-all" rule?
>>>
>>>     --
>>>     Daniel Grotti
>>>     Head of Customer Support
>>>     Sipwise GmbH, Campus 21/Europaring F15
>>>     AT-2345 Brunn am Gebirge
>>>
>>>     Office: +43(0)130120332
>>>     Email:dgrotti at sipwise.com
>>>     Website:https://www.sipwise.com
>>>
>>>     On 11/30/2017 11:29 AM, stefanormc wrote:
>>>>     Load gws matching calling part 'sip:390118118673 at d.voceblu.it
>>>>     <mailto:sip%3A390118118673 at d.voceblu.it>' and called user
>>>>     '3355416588' and called part 'sip:3355416588 at d.voceblu.it
>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' -
>>>>     R=sip:3355416588 at d.voceblu.it
>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone
>>>>     ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
>>>
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/86a1e910/attachment-0001.html>

From dgrotti at sipwise.com  Thu Nov 30 06:39:16 2017
From: dgrotti at sipwise.com (Daniel Grotti)
Date: Thu, 30 Nov 2017 12:39:16 +0100
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
Message-ID: <42068f1a-c029-491d-3eab-ad6e0934aa40@sipwise.com>

Stefano,
Which version do you run?


Daniel



On 11/30/2017 12:37 PM, Daniel Grotti wrote:
> Try to run:
>
> ngcp-sercmd proxy lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
> -- 
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email:dgrotti at sipwise.com
> Website:https://www.sipwise.com
> On 11/30/2017 12:32 PM, stefanormc wrote:
>> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>>
>> Last login: Thu Nov 30 12:04:19 2017 from 
>> 93-57-17-112.ip162.fastwebnet.it 
>> <http://93-57-17-112.ip162.fastwebnet.it>
>>
>> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 9
>>
>> prefix:
>>
>> from_uri: @digi.voceblu.it <http://digi.voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 3
>>
>> priority: 1
>>
>> weight: 1
>>
>> }
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 7
>>
>> prefix:
>>
>> from_uri: @voceblu.it <http://voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 1
>>
>> priority: 2
>>
>> weight: 1
>>
>> }
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 6
>>
>> prefix:
>>
>> from_uri: old at d.voceblu.it <mailto:old at d.voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 4
>>
>> priority: 1
>>
>> weight: 1
>>
>> }
>>
>> {
>>
>> lcr_id: 1
>>
>> rule_id: 4
>>
>> prefix:
>>
>> from_uri: @geva.voceblu.it <http://geva.voceblu.it>
>>
>> request_uri:
>>
>> stopper: 0
>>
>> }
>>
>> {
>>
>> gw_index: 1
>>
>> priority: 2
>>
>> weight: 1
>>
>> }
>>
>> 0
>>
>> centrale:~#
>>
>>
>>
>> But there is in web interface:
>>
>> # 	Prefix 	Caller Pattern 	State 	Description 	Peer Group 	Peer Name 
>> Peer Host 	Peer IP 	Peer State 	Priority 	Weight 	
>> 4 	
>> 	@geva.voceblu.it <http://geva.voceblu.it> 	1 	
>> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
>> 	1 	2 	1 	
>> 6 	
>> 	^d\.voceblu\.it$ 	1 	seleziona numeri digitel 	centrale03 	centrale03 	
>> 	94.125.235.56 	1 	1 	1 	
>> 7 	
>> 	@voceblu.it <http://voceblu.it> 	1 	
>> 	TWT 	TWT 	voce.voipeople.it <http://voce.voipeople.it> 	77.239.128.7 
>> 	1 	2 	1 	
>> 8 	
>> 	@v.voceblu.it <http://v.voceblu.it> 	1 	
>> 	centrale03 	centrale03 	
>> 	94.125.235.56 	1 	1 	1 	
>> 9 	
>> 	@digi.voceblu.it <http://digi.voceblu.it> 	1 	seleziona tutti quelli 
>> diretti digitel 	Digitel diretto 	Digitel diretto 
>> voip.digitelitalia.it <http://voip.digitelitalia.it> 	109.238.17.166 
>> 1 	1 	1 	
>>
>>
>>
>> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com 
>> <mailto:dgrotti at sipwise.com>) wrote:
>>
>>> it seems you do not have it.
>>> Please try to re-save the rule, and also do:
>>>
>>> ngcp-sercmd proxy lcr.dump_gws
>>> ngcp-sercmd proxy lcr.dump_rules
>>>
>>>
>>> Do you see your peer there and the rule?
>>> --
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email:dgrotti at sipwise.com
>>> Website:https://www.sipwise.com
>>> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>>>> There is a rule catching all d.voceblu.it <http://d.voceblu.it>
>>>>
>>>>
>>>> -------- Messaggio originale --------
>>>> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
>>>> Da: Daniel Grotti
>>>> A: stefanormc ,spce-user at lists.sipwise.com
>>>> CC:
>>>>
>>>>
>>>>     Hi,
>>>>     problem is that you do not have a peering rule matching the
>>>>     called (anc callind) part, see below.
>>>>     Please check your peering rules in your peerin server. Have you
>>>>     at least created the "catch-all" rule?
>>>>
>>>>     --
>>>>     Daniel Grotti
>>>>     Head of Customer Support
>>>>     Sipwise GmbH, Campus 21/Europaring F15
>>>>     AT-2345 Brunn am Gebirge
>>>>
>>>>     Office: +43(0)130120332
>>>>     Email:dgrotti at sipwise.com
>>>>     Website:https://www.sipwise.com
>>>>
>>>>     On 11/30/2017 11:29 AM, stefanormc wrote:
>>>>>     Load gws matching calling part 'sip:390118118673 at d.voceblu.it
>>>>>     <mailto:sip%3A390118118673 at d.voceblu.it>' and called user
>>>>>     '3355416588' and called part 'sip:3355416588 at d.voceblu.it
>>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone' -
>>>>>     R=sip:3355416588 at d.voceblu.it
>>>>>     <mailto:sip%3A3355416588 at d.voceblu.it>;user=phone
>>>>>     ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
>>>>
>>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/856db567/attachment-0001.html>

From stefanormc at gmail.com  Thu Nov 30 06:42:46 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 03:42:46 -0800
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
Message-ID: <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>

It doesn?t seem to effect the rules

I?m on 5.4.1


On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com) wrote:

Try to run:

ngcp-sercmd proxy  lcr.reload

and then again:

ngcp-sercmd proxy lcr.dump_rules

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 12:32 PM, stefanormc wrote:

There is no rule in ngcp-sercmd proxy lcr.dump_rules

Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 9

prefix:

from_uri: @digi.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 3

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 7

prefix:

from_uri: @voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

{

lcr_id: 1

rule_id: 6

prefix:

from_uri: old at d.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 4

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 4

prefix:

from_uri: @geva.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

0

centrale:~#


But there is in web interface:

# Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
IP Peer State Priority Weight
4
@geva.voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
6
^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
94.125.235.56 1 1 1
7
@voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
8
@v.voceblu.it 1
centrale03 centrale03
94.125.235.56 1 1 1
9
@digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel
diretto Digitel
diretto voip.digitelitalia.it 109.238.17.166 1 1 1


On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com) wrote:

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:

There is a rule catching all d.voceblu.it


-------- Messaggio originale --------
Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
Da: Daniel Grotti
A: stefanormc ,spce-user at lists.sipwise.com
CC:


Hi,
problem is that you do not have a peering rule matching the called (anc
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least
created the "catch-all" rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:

Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/41ad61f9/attachment-0001.html>

From stefanormc at gmail.com  Thu Nov 30 06:48:54 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 03:48:54 -0800
Subject: [Spce-user] Ris:  connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
Message-ID: <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>

Instead of deleting and recreating the rule I moved it to the other peer.
Could that be the problem?


On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:

It doesn?t seem to effect the rules

I?m on 5.4.1


On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com) wrote:

Try to run:

ngcp-sercmd proxy  lcr.reload

and then again:

ngcp-sercmd proxy lcr.dump_rules

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 12:32 PM, stefanormc wrote:

There is no rule in ngcp-sercmd proxy lcr.dump_rules

Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 9

prefix:

from_uri: @digi.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 3

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 7

prefix:

from_uri: @voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

{

lcr_id: 1

rule_id: 6

prefix:

from_uri: old at d.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 4

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 4

prefix:

from_uri: @geva.voceblu.it

request_uri:

stopper: 0

}

{

gw_index: 1

priority: 2

weight: 1

}

0

centrale:~#


But there is in web interface:

# Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
IP Peer State Priority Weight
4
@geva.voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
6
^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
94.125.235.56 1 1 1
7
@voceblu.it 1
TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
8
@v.voceblu.it 1
centrale03 centrale03
94.125.235.56 1 1 1
9
@digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel
diretto Digitel
diretto voip.digitelitalia.it 109.238.17.166 1 1 1


On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com) wrote:

it seems you do not have it.
Please try to re-save the rule, and also do:

ngcp-sercmd proxy lcr.dump_gws
ngcp-sercmd proxy lcr.dump_rules


Do you see your peer there and the rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:

There is a rule catching all d.voceblu.it


-------- Messaggio originale --------
Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
Da: Daniel Grotti
A: stefanormc ,spce-user at lists.sipwise.com
CC:


Hi,
problem is that you do not have a peering rule matching the called (anc
callind) part, see below.
Please check your peering rules in your peerin server. Have you at least
created the "catch-all" rule?

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/30/2017 11:29 AM, stefanormc wrote:

Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
- R=sip:3355416588 at d.voceblu.it;user=phone
ID=3c4632c304e2-1vukdq0ac0ql at snom190 UA='snom190/3.60x'
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/121820f3/attachment-0001.html>

From barry at flanagan.ie  Thu Nov 30 07:11:22 2017
From: barry at flanagan.ie (Barry Flanagan)
Date: Thu, 30 Nov 2017 12:11:22 +0000
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
Message-ID: <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>

On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/5b5c5d54/attachment-0001.html>

From stefanormc at gmail.com  Thu Nov 30 09:06:41 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 06:06:41 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
Message-ID: <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/f3fc2962/attachment-0001.html>

From davidp at csr-online.net  Thu Nov 30 10:05:29 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 15:05:29 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <54be7139-33a4-35e0-e11e-4a8ccf28b628@sipwise.com>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
 <54be7139-33a4-35e0-e11e-4a8ccf28b628@sipwise.com>
Message-ID: <62A46FA3-AF50-4648-93FE-D677AAD491CE@csr-online.net>

Works thank you


El 30/11/17 11:53, "Spce-user en nombre de Daniel Grotti" <spce-user-bounces at lists.sipwise.com en nombre de dgrotti at sipwise.com> escribi?:

    David,
    you need to do:

    apt-get update
    apt-get install ngcp-panel
    ngcpcfg apply 'commit mesasge'

    or better update to latest hotfixes:

    apt-get update && apt-get upgrade && \
    ngcp-update-db-schema && ngcp-update-cfg-schema && \
    ngcpcfg apply 'commit message'

    --
    Daniel Grotti
    Head of Customer Support
    Sipwise GmbH, Campus 21/Europaring F15
    AT-2345 Brunn am Gebirge

    Office: +43(0)130120332
    Email: dgrotti at sipwise.com
    Website: https://www.sipwise.com

    On 11/30/2017 11:45 AM, David | csr-online SPAIN wrote:
    > Thanks a lot i try
    >
    > El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
    >
    >      Dear David,
    >
    >      you need to upgrade ngcp-panel with command:
    >
    >               apt-get install ngcp-panel
    >
    >      and after that restart ngcp-panel service:
    >
    >               service ngcp-panel restart
    >
    >      Best regards,
    >      Irina Peshinskaya
    >
    >      On 30.11.2017 12:41, David | csr-online SPAIN wrote:
    >      > Sorry for this question what steps i do to install/upgrade to the fix?
    >      >
    >      > Thank you
    >      >
    >      >
    >      > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
    >      >
    >      >      Dear David,
    >      >
    >      >      We have released a hotfix for this issue.
    >      >      Kindly find the fix in the ngcp-panel mr5.5.1.5
    >      >
    >      >      Best regards,
    >      >      Irina Peshinskaya
    >      >
    >      >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
    >      >      > I try with all reseller,s customers and the error always the same in version 5.5.1
    >      >      >
    >      >      > In panel.log the error was:
    >      >      >
    >      >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
    >      >      >
    >      >      >
    >      >      > Thank you very much
    >      >      >
    >      >      >
    >      >      >
    >      >      > Cordialment | Atentamente | Sincerely
    >      >      > David Pablo Mitchell
    >      >      > CTO
    >      >      >
    >      >      > CSR ONLINE
    >      >      > Movil: +34 658174990
    >      >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
    >      >      > Mail: davidp at csr-online.net
    >      >      > Web: www.csr-online.net
    >      >      > You run your business, we run your IT.
    >      >      >
    >      >      >
    >      >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    >      >      > _______________________________________________
    >      >      > Spce-user mailing list
    >      >      > Spce-user at lists.sipwise.com
    >      >      > https://lists.sipwise.com/listinfo/spce-user
    >      >
    >      >
    >      >
    >      >
    >      >
    >      > Cordialment | Atentamente | Sincerely
    >      > David Pablo Mitchell
    >      > CTO
    >      >
    >      > CSR ONLINE
    >      > Movil: +34 658174990
    >      > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    >      > Mail: davidp at csr-online.net
    >      > Web: www.csr-online.net
    >      > You run your business, we run your IT.
    >      >
    >      >
    >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    >
    >
    >
    >
    >
    > Cordialment | Atentamente | Sincerely
    > David Pablo Mitchell
    > CTO
    >
    > CSR ONLINE
    > Movil: +34 658174990
    > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    > Mail: davidp at csr-online.net
    > Web: www.csr-online.net
    > You run your business, we run your IT.
    >
    >
    > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    > _______________________________________________
    > Spce-user mailing list
    > Spce-user at lists.sipwise.com
    > https://lists.sipwise.com/listinfo/spce-user


    _______________________________________________
    Spce-user mailing list
    Spce-user at lists.sipwise.com
    https://lists.sipwise.com/listinfo/spce-user



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From davidp at csr-online.net  Thu Nov 30 10:05:57 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 15:05:57 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
Message-ID: <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>

Working invoices thansk a lot


El 30/11/17 11:45, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

    Thanks a lot i try

    El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

        Dear David,

        you need to upgrade ngcp-panel with command:

                 apt-get install ngcp-panel

        and after that restart ngcp-panel service:

                 service ngcp-panel restart

        Best regards,
        Irina Peshinskaya

        On 30.11.2017 12:41, David | csr-online SPAIN wrote:
        > Sorry for this question what steps i do to install/upgrade to the fix?
        >
        > Thank you
        >
        >
        > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
        >
        >      Dear David,
        >
        >      We have released a hotfix for this issue.
        >      Kindly find the fix in the ngcp-panel mr5.5.1.5
        >
        >      Best regards,
        >      Irina Peshinskaya
        >
        >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
        >      > I try with all reseller,s customers and the error always the same in version 5.5.1
        >      >
        >      > In panel.log the error was:
        >      >
        >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
        >      >
        >      >
        >      > Thank you very much
        >      >
        >      >
        >      >
        >      > Cordialment | Atentamente | Sincerely
        >      > David Pablo Mitchell
        >      > CTO
        >      >
        >      > CSR ONLINE
        >      > Movil: +34 658174990
        >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
        >      > Mail: davidp at csr-online.net
        >      > Web: www.csr-online.net
        >      > You run your business, we run your IT.
        >      >
        >      >
        >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
        >      > _______________________________________________
        >      > Spce-user mailing list
        >      > Spce-user at lists.sipwise.com
        >      > https://lists.sipwise.com/listinfo/spce-user
        >
        >
        >
        >
        >
        > Cordialment | Atentamente | Sincerely
        > David Pablo Mitchell
        > CTO
        >
        > CSR ONLINE
        > Movil: +34 658174990
        > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
        > Mail: davidp at csr-online.net
        > Web: www.csr-online.net
        > You run your business, we run your IT.
        >
        >
        > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





    Cordialment | Atentamente | Sincerely
    David Pablo Mitchell
    CTO

    CSR ONLINE
    Movil: +34 658174990
    Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    Mail: davidp at csr-online.net
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    _______________________________________________
    Spce-user mailing list
    Spce-user at lists.sipwise.com
    https://lists.sipwise.com/listinfo/spce-user

    Cordialment | Atentamente | Sincerely




    Movil:
    Tel.Oficina:
    Mail:
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From stefanormc at gmail.com  Thu Nov 30 10:49:47 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 07:49:47 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
 <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
Message-ID: <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>

Still not working!

I did manage to send calls from peer ?> subscriber but I get a 407 error

I can?t seem to get the peer registered against the subscriber as I did
yesterday

I first configured the web interface and then manually updated
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2;
then I re-applied ngcpcfg but no registration

How do I match credentials in reg_agent to the right peer?




Il giorno 30 novembre 2017 @ 15:06:41, stefanormc (stefanormc at gmail.com) ha
scritto:

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/60221b82/attachment-0001.html>

From davidp at csr-online.net  Thu Nov 30 10:58:11 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 15:58:11 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
 <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>
Message-ID: <DFE76E3D-3E7D-43CF-B592-400C4BA55E21@csr-online.net>

I have a billing profile but i dont have opci?n in the panel to delete
By i mistake i assign 2 billing profiles to same reseller

How i can remove profile bill?? please


El 30/11/17 16:05, "David | csr-online SPAIN" <davidp at csr-online.net> escribi?:

    Working invoices thansk a lot


    El 30/11/17 11:45, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

        Thanks a lot i try

        El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

            Dear David,

            you need to upgrade ngcp-panel with command:

                     apt-get install ngcp-panel

            and after that restart ngcp-panel service:

                     service ngcp-panel restart

            Best regards,
            Irina Peshinskaya

            On 30.11.2017 12:41, David | csr-online SPAIN wrote:
            > Sorry for this question what steps i do to install/upgrade to the fix?
            >
            > Thank you
            >
            >
            > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
            >
            >      Dear David,
            >
            >      We have released a hotfix for this issue.
            >      Kindly find the fix in the ngcp-panel mr5.5.1.5
            >
            >      Best regards,
            >      Irina Peshinskaya
            >
            >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
            >      > I try with all reseller,s customers and the error always the same in version 5.5.1
            >      >
            >      > In panel.log the error was:
            >      >
            >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
            >      >
            >      >
            >      > Thank you very much
            >      >
            >      >
            >      >
            >      > Cordialment | Atentamente | Sincerely
            >      > David Pablo Mitchell
            >      > CTO
            >      >
            >      > CSR ONLINE
            >      > Movil: +34 658174990
            >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
            >      > Mail: davidp at csr-online.net
            >      > Web: www.csr-online.net
            >      > You run your business, we run your IT.
            >      >
            >      >
            >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
            >      > _______________________________________________
            >      > Spce-user mailing list
            >      > Spce-user at lists.sipwise.com
            >      > https://lists.sipwise.com/listinfo/spce-user
            >
            >
            >
            >
            >
            > Cordialment | Atentamente | Sincerely
            > David Pablo Mitchell
            > CTO
            >
            > CSR ONLINE
            > Movil: +34 658174990
            > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
            > Mail: davidp at csr-online.net
            > Web: www.csr-online.net
            > You run your business, we run your IT.
            >
            >
            > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





        Cordialment | Atentamente | Sincerely
        David Pablo Mitchell
        CTO

        CSR ONLINE
        Movil: +34 658174990
        Tel.Oficina:+34 931860160 / +34 902056355  ext.101
        Mail: davidp at csr-online.net
        Web: www.csr-online.net
        You run your business, we run your IT.


        La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
        _______________________________________________
        Spce-user mailing list
        Spce-user at lists.sipwise.com
        https://lists.sipwise.com/listinfo/spce-user

        Cordialment | Atentamente | Sincerely




        Movil:
        Tel.Oficina:
        Mail:
        Web: www.csr-online.net
        You run your business, we run your IT.


        La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From henk at voipdigit.nl  Thu Nov 30 11:05:13 2017
From: henk at voipdigit.nl (Henk)
Date: Thu, 30 Nov 2017 17:05:13 +0100
Subject: [Spce-user] Duplicate key error while inserting peering rule
Message-ID: <6bf6cc51-eee9-ef06-ed55-0a68d11ca4f2@voipdigit.nl>

Hi all,

I get this message when I want to create an extra peering rule:

MSG="Failed to create peering rule Duplicate entry '19-3' for key 
'rule_id_gw_id_idx' [for Statement "INSERT INTO 
`provisioning`.`voip_peer_rules` ....

I traced it back to one of the triggers that updates the kamailio table, 
so it seems the kamailio and provision tables are out of sync. Is there 
a way to fix this other then removing all gateways and start over?

Regards,

Henk Plessius

VoipDigit




From davidp at csr-online.net  Thu Nov 30 11:13:06 2017
From: davidp at csr-online.net (David | csr-online SPAIN)
Date: Thu, 30 Nov 2017 16:13:06 +0000
Subject: [Spce-user] i can't create invoices help please
In-Reply-To: <DFE76E3D-3E7D-43CF-B592-400C4BA55E21@csr-online.net>
References: <CC32583D-1843-472C-9265-B4670A32AC34@contoso.com>
 <b0ba0507-bbb6-1662-c165-69a6e5070dae@sipwise.com>
 <F4CB15AA-F122-47AA-8EA7-B538E38F7DDF@csr-online.net>
 <ed08c771-5e31-72a7-4d1c-6355746324de@sipwise.com>
 <47A4111D-E7C2-42C7-8860-1DD346868FB6@csr-online.net>
 <BB210F91-203A-436A-BE60-9F2D7FA5D0D9@csr-online.net>
 <DFE76E3D-3E7D-43CF-B592-400C4BA55E21@csr-online.net>
Message-ID: <3F54F04F-7076-4433-8581-1DC429A9EF88@csr-online.net>

Sorry to every body i cant applu billing fees to my calls and i am in the last versi?n and fixes
All calls appear 0.0 cost

Any help please?


El 30/11/17 16:58, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

    I have a billing profile but i dont have opci?n in the panel to delete
    By i mistake i assign 2 billing profiles to same reseller

    How i can remove profile bill?? please


    El 30/11/17 16:05, "David | csr-online SPAIN" <davidp at csr-online.net> escribi?:

        Working invoices thansk a lot


        El 30/11/17 11:45, "Spce-user en nombre de David | csr-online SPAIN" <spce-user-bounces at lists.sipwise.com en nombre de davidp at csr-online.net> escribi?:

            Thanks a lot i try

            El 30/11/17 11:44, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:

                Dear David,

                you need to upgrade ngcp-panel with command:

                         apt-get install ngcp-panel

                and after that restart ngcp-panel service:

                         service ngcp-panel restart

                Best regards,
                Irina Peshinskaya

                On 30.11.2017 12:41, David | csr-online SPAIN wrote:
                > Sorry for this question what steps i do to install/upgrade to the fix?
                >
                > Thank you
                >
                >
                > El 30/11/17 11:35, "Irina Peshinskaya" <ipeshinskaya at sipwise.com> escribi?:
                >
                >      Dear David,
                >
                >      We have released a hotfix for this issue.
                >      Kindly find the fix in the ngcp-panel mr5.5.1.5
                >
                >      Best regards,
                >      Irina Peshinskaya
                >
                >      On 29.11.2017 23:19, David | csr-online SPAIN wrote:
                >      > I try with all reseller,s customers and the error always the same in version 5.5.1
                >      >
                >      > In panel.log the error was:
                >      >
                >      > Nov 29 22:12:32 spce ngcp-panel: ERROR: IP=83.49.24.24 CALLED=Controller::Invoice::create TX=14FBAAD9E1E2DDA0 USER=administrator DATA={ 'contract.id' => '6', 'template.id' => '2', 'period' => '2017-11', 'save' => 'Save', 'submitid' => ''} MSG="Failed to create invoice (DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'me.source_cli_suppression_id' in 'field list' [for Statement "SELECT `me`.`source_user`, `me`.`source_domain`, `me`.`source_cli`, `me`.`destination_user_in`, `me`.`source_cli_suppression_id`, `me`.`destination_user_in_suppression_id`, `me`.`start_time`, `me`.`duration`, `me`.`call_type`, `me`.`source_customer_cost`, `source_customer_billing_zones_history`.`zone`, `source_customer_billing_zones_history`.`detail` FROM `accounting`.`cdr` `me` LEFT JOIN `billing`.`billing_zones_history` `source_customer_billing_zones_history` ON `source_customer_billing_zones_history`.`id` = `me`.`source_customer_billing_zone_id` WHERE ( ( `call_status` = ? AND `source_account_id` = ? AND `source_user_id` != ? AND ( `start_time` >= ? AND `start_time` <= ? ) ) ) ORDER BY `start_time`" with ParamValues: 0='ok', 1="6", 2='0', 3=1509494400, 4=1512086399] at /usr/share/perl5/NGCP/Panel/Utils/Invoice.pm line 84#012)" LOG=""
                >      >
                >      >
                >      > Thank you very much
                >      >
                >      >
                >      >
                >      > Cordialment | Atentamente | Sincerely
                >      > David Pablo Mitchell
                >      > CTO
                >      >
                >      > CSR ONLINE
                >      > Movil: +34 658174990
                >      > Tel.Oficina:+34 931860160 / +34 902056355 ext.101
                >      > Mail: davidp at csr-online.net
                >      > Web: www.csr-online.net
                >      > You run your business, we run your IT.
                >      >
                >      >
                >      > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
                >      > _______________________________________________
                >      > Spce-user mailing list
                >      > Spce-user at lists.sipwise.com
                >      > https://lists.sipwise.com/listinfo/spce-user
                >
                >
                >
                >
                >
                > Cordialment | Atentamente | Sincerely
                > David Pablo Mitchell
                > CTO
                >
                > CSR ONLINE
                > Movil: +34 658174990
                > Tel.Oficina:+34 931860160 / +34 902056355  ext.101
                > Mail: davidp at csr-online.net
                > Web: www.csr-online.net
                > You run your business, we run your IT.
                >
                >
                > La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





            Cordialment | Atentamente | Sincerely
            David Pablo Mitchell
            CTO

            CSR ONLINE
            Movil: +34 658174990
            Tel.Oficina:+34 931860160 / +34 902056355  ext.101
            Mail: davidp at csr-online.net
            Web: www.csr-online.net
            You run your business, we run your IT.


            La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
            _______________________________________________
            Spce-user mailing list
            Spce-user at lists.sipwise.com
            https://lists.sipwise.com/listinfo/spce-user

            Cordialment | Atentamente | Sincerely




            Movil:
            Tel.Oficina:
            Mail:
            Web: www.csr-online.net
            You run your business, we run your IT.


            La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.





    Cordialment | Atentamente | Sincerely
    David Pablo Mitchell
    CTO

    CSR ONLINE
    Movil: +34 658174990
    Tel.Oficina:+34 931860160 / +34 902056355  ext.101
    Mail: davidp at csr-online.net
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.
    _______________________________________________
    Spce-user mailing list
    Spce-user at lists.sipwise.com
    https://lists.sipwise.com/listinfo/spce-user

    Cordialment | Atentamente | Sincerely




    Movil:
    Tel.Oficina:
    Mail:
    Web: www.csr-online.net
    You run your business, we run your IT.


    La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.



Cordialment | Atentamente | Sincerely
David Pablo Mitchell
CTO

CSR ONLINE
Movil: +34 658174990
Tel.Oficina:+34 931860160 / +34 902056355  ext.101
Mail: davidp at csr-online.net
Web: www.csr-online.net
You run your business, we run your IT.


La informaci?n contenida en el mensaje y/o archivo(s) adjunto(s) es confidencial y est? destinada a ser le?da s?lo por la(s) persona(s) a la(s) que va dirigida. Si usted lee este mensaje y no es el destinatario se?alado, el empleado o el agente responsable de entregar el mensaje al destinatario, o ha recibido esta comunicaci?n por error, le informamos que est? totalmente prohibida, y puede ser ilegal, cualquier divulgaci?n, distribuci?n o reproducci?n de esta comunicaci?n, y le rogamos que nos lo notifique inmediatamente y nos devuelva el mensaje original a la direcci?n arriba mencionada.

From stefanormc at gmail.com  Thu Nov 30 16:13:53 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 13:13:53 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
 <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
 <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>
Message-ID: <CAHTRqyWLE_ec2PsJBXEQrOMqUdY=W7+9dF2=Pn8ygE580U7BuQ@mail.gmail.com>

So I wiped and reconfigured peer/subscriber and now is registered again.

I Get a 403 error, relaying not allowed

Any suggestions?

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Call from trusted
peer with uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Rejecting peering
attempt with non-local request domain -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
source-leg for uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd':
'eee76c3b-1019-411d-b1f4-6815e2e76bdd|<null>|<null>|0|||0||||call|<null>|1512076297.538332||||||||||||0|'
- R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
destination-leg for uuid '0':
'0|||0|<null>|0|3355416588|94.125.235.56|||0||||||||||||3355416588|' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3463]: NOTICE: <script>: New request on
proxy - M=ACK R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Thanks

Stefano



On 30 November 2017 at 16:49:47, stefanormc (stefanormc at gmail.com) wrote:

Still not working!

I did manage to send calls from peer ?> subscriber but I get a 407 error

I can?t seem to get the peer registered against the subscriber as I did
yesterday

I first configured the web interface and then manually updated
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2;
then I re-applied ngcpcfg but no registration

How do I match credentials in reg_agent to the right peer?




Il giorno 30 novembre 2017 @ 15:06:41, stefanormc (stefanormc at gmail.com) ha
scritto:

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/11fb19a2/attachment-0001.html>

From stefanormc at gmail.com  Thu Nov 30 16:29:22 2017
From: stefanormc at gmail.com (stefanormc)
Date: Thu, 30 Nov 2017 13:29:22 -0800
Subject: [Spce-user] Ris: connect 2 sipwise as trunk
In-Reply-To: <CAHTRqyWLE_ec2PsJBXEQrOMqUdY=W7+9dF2=Pn8ygE580U7BuQ@mail.gmail.com>
References: <CAHTRqyXN7ooT-+3hONucF4Zu3b-Vtc3rdwzqWCyVHPvMqziFZw@mail.gmail.com>
 <20171128203240.0ad077c6@multivac>
 <cf46a04a-6a66-184c-c15c-311746bbb4d1@sipwise.com>
 <20171129204618.4c5fd521@multivac>
 <CALJb549W_=8knqxPqTXOi2xJbNRf=ON_U7MJixCDB71fH3GEZw@mail.gmail.com>
 <20171129214943.3a6c60f9@multivac>
 <CAHTRqyVhgQzBSzWnBLdHzwqmX5Q0L_3+bi_E_171ESzzpxOE1Q@mail.gmail.com>
 <7cbee095-5366-cbbd-f074-34b7de20cd18@sipwise.com>
 <CAHTRqyWWAZAdVGMyzEXmRR3_Z4nzso=wuxRU7A57ckrLf0TewQ@mail.gmail.com>
 <dea89bc9-5f7c-1ed7-b424-2db12ca32fdb@sipwise.com>
 <28zu3d-wxxownnf419s3il4yu-2un244fpwwls-o8otadiwu0szv1i660aazwgi-sdoe018phsqv-l0i30oufinrv-c5vacj-ys7sqr-rbpxu538atq1-p62ay1-ph5wiz-it8zvlo76xi026q81x-ieusnk.1512039250621@email.android.com>
 <55c45e00-7052-faf0-23ad-336117bff2e7@sipwise.com>
 <CAHTRqyXhK7=D21BKCr3NvXa4BQn=8aU4m_wuhgeFyY-ACUKOuw@mail.gmail.com>
 <029dac13-4fcc-1646-ca97-26d752426b9c@sipwise.com>
 <CAHTRqyV5gd9Qo5FA0pP0_xWEgF-jN_RCrgPq-f2d5Upy2BxQBw@mail.gmail.com>
 <CAHTRqyXexYbVRyBqGnDQjWzmL_w7D0To-rgySOzWh2t64rzirw@mail.gmail.com>
 <CALJb54_z1VwqKNcfkkBVni5T2jAfAEBjNy_xeDmD=EHA3+=2og@mail.gmail.com>
 <CAHTRqyX9-9cO1WEy993ibwG74dNvVp=qWk+sGHsVdWr4-ch3gg@mail.gmail.com>
 <CAHTRqyXo2VmURsBtASQfmzWmGqn4sY-nhpmPZq1uHpzrpZO56Q@mail.gmail.com>
 <CAHTRqyWLE_ec2PsJBXEQrOMqUdY=W7+9dF2=Pn8ygE580U7BuQ@mail.gmail.com>
Message-ID: <CAHTRqyW5uLH=zfHknTC91XA4CHqPAY-nAFMVyCZxYCbMhBFAjQ@mail.gmail.com>

If I remove the ?trusted source ip? I get a 407 error.

Apparently tries to apply the caller?s realm to the subscriber auth and it
fails to authenticate

Proxy-Authorization: Digest username="0110002222", realm="d.voceblu.it",
nonce="WiB2m1ogdW+McwtYdiMw6t/WoFxcsYiR",
uri="sip:3355416588 at 94.125.235.56:5060;transport=udp",
response="4fd4ed9b67e55d141fb57bc193d08bd6", algorithm=MD5


But this is how it is configured:

domain=c.voceblu.it

user=0110002222

pwd=xxxxxxxxxxxxxxx

proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]

[% IF sip_adv_ips.size -%]

contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]

[% ELSE -%]

contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]

[% END -%]





On 30 November 2017 at 22:13:53, stefanormc (stefanormc at gmail.com) wrote:

So I wiped and reconfigured peer/subscriber and now is registered again.

I Get a 403 error, relaying not allowed

Any suggestions?

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Call from trusted
peer with uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Rejecting peering
attempt with non-local request domain -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
source-leg for uuid 'eee76c3b-1019-411d-b1f4-6815e2e76bdd':
'eee76c3b-1019-411d-b1f4-6815e2e76bdd|<null>|<null>|0|||0||||call|<null>|1512076297.538332||||||||||||0|'
- R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3478]: NOTICE: <script>: Setting acc
destination-leg for uuid '0':
'0|||0|<null>|0|3355416588|94.125.235.56|||0||||||||||||3355416588|' -
R=sip:3355416588 at 94.125.235.56:5060;transport=udp
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Nov 30 22:11:37 centrale03 proxy[3463]: NOTICE: <script>: New request on
proxy - M=ACK R=sip:3355416588 at 94.125.235.56:5060;transport=udp F=
sip:390110133435 at d.voceblu.it T=sip:3355416588 at 94.125.235.56 IP=
94.125.232.155:5060 (127.0.0.1:5060)
ID=88253ZmFkMTAxZWJjNjdlNjhjMzI4MTU2YTZlMzE3NDIxMjE_b2b-1 UA='<null>'

Thanks

Stefano



On 30 November 2017 at 16:49:47, stefanormc (stefanormc at gmail.com) wrote:

Still not working!

I did manage to send calls from peer ?> subscriber but I get a 407 error

I can?t seem to get the peer registered against the subscriber as I did
yesterday

I first configured the web interface and then manually updated
/etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2;
then I re-applied ngcpcfg but no registration

How do I match credentials in reg_agent to the right peer?




Il giorno 30 novembre 2017 @ 15:06:41, stefanormc (stefanormc at gmail.com) ha
scritto:

I had to delete and recreate the rule. Apparently adding the description
solved it

centrale:~# ngcp-sercmd proxy lcr.dump_rules

{

lcr_id: 1

rule_id: 11

prefix:

from_uri: ^sip:.+ at v\.voceblu\.it$

request_uri:

stopper: 0

}

{

gw_index: 2

priority: 1

weight: 1

}

{

lcr_id: 1

rule_id: 10

prefix:

from_uri: ^sip:.+ at d\.voceblu\.it$

request_uri:

stopper: 0

}




Il giorno 30 novembre 2017 @ 13:11:44, Barry Flanagan (barry at flanagan.ie)
ha scritto:


On 30 November 2017 at 11:48, stefanormc <stefanormc at gmail.com> wrote:

> Instead of deleting and recreating the rule I moved it to the other peer.
> Could that be the problem?
>
>
>
It seems to me your caller patterns are not right. I would have thought
something like:

^sip:.+ at d\.voceblu\.it$


...would be mo0re what is needed.

-Barry Flanagan



On 30 November 2017 at 12:42:46, stefanormc (stefanormc at gmail.com) wrote:
>
> It doesn?t seem to effect the rules
>
> I?m on 5.4.1
>
>
> On 30 November 2017 at 12:37:19, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> Try to run:
>
> ngcp-sercmd proxy  lcr.reload
>
> and then again:
>
> ngcp-sercmd proxy lcr.dump_rules
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 12:32 PM, stefanormc wrote:
>
> There is no rule in ngcp-sercmd proxy lcr.dump_rules
>
> Last login: Thu Nov 30 12:04:19 2017 from 93-57-17-112.ip162.fastwebnet.it
>
> centrale:~# ngcp-sercmd proxy lcr.dump_rules
>
> {
>
> lcr_id: 1
>
> rule_id: 9
>
> prefix:
>
> from_uri: @digi.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 3
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 7
>
> prefix:
>
> from_uri: @voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 6
>
> prefix:
>
> from_uri: old at d.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 4
>
> priority: 1
>
> weight: 1
>
> }
>
> {
>
> lcr_id: 1
>
> rule_id: 4
>
> prefix:
>
> from_uri: @geva.voceblu.it
>
> request_uri:
>
> stopper: 0
>
> }
>
> {
>
> gw_index: 1
>
> priority: 2
>
> weight: 1
>
> }
>
> 0
>
> centrale:~#
>
>
> But there is in web interface:
>
> # Prefix Caller Pattern State Description Peer Group Peer Name Peer Host Peer
> IP Peer State Priority Weight
> 4
> @geva.voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 6
> ^d\.voceblu\.it$ 1 seleziona numeri digitel centrale03 centrale03
> 94.125.235.56 1 1 1
> 7
> @voceblu.it 1
> TWT TWT voce.voipeople.it 77.239.128.7 1 2 1
> 8
> @v.voceblu.it 1
> centrale03 centrale03
> 94.125.235.56 1 1 1
> 9
> @digi.voceblu.it 1 seleziona tutti quelli diretti digitel Digitel diretto Digitel
> diretto voip.digitelitalia.it 109.238.17.166 1 1 1
>
>
> On 30 November 2017 at 11:59:24, Daniel Grotti (dgrotti at sipwise.com)
> wrote:
>
> it seems you do not have it.
> Please try to re-save the rule, and also do:
>
> ngcp-sercmd proxy lcr.dump_gws
> ngcp-sercmd proxy lcr.dump_rules
>
>
> Do you see your peer there and the rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:54 AM, stefanormc at gmail.com wrote:
>
> There is a rule catching all d.voceblu.it
>
>
> -------- Messaggio originale --------
> Oggetto: Re: [Spce-user] connect 2 sipwise as trunk
> Da: Daniel Grotti
> A: stefanormc ,spce-user at lists.sipwise.com
> CC:
>
>
> Hi,
> problem is that you do not have a peering rule matching the called (anc
> callind) part, see below.
> Please check your peering rules in your peerin server. Have you at least
> created the "catch-all" rule?
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332 <+43%201%2030120332>
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/30/2017 11:29 AM, stefanormc wrote:
>
> Load gws matching calling part 'sip:390118118673 at d.voceblu.it' and called
> user '3355416588' and called part 'sip:3355416588 at d.voceblu.it;user=phone'
> - R=sip:3355416588 at d.voceblu.it;user=phone ID=3c4632c304e2-1vukdq0ac0ql at snom190
> UA='snom190/3.60x'
>
>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171130/58b65455/attachment-0001.html>