[Spce-user] loose-routing

stefanormc stefanormc at gmail.com
Mon Nov 6 05:15:03 EST 2017


I added the dns name in the domains section but still getting the same
problem:

Nov  6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0322259098 at c.voceblu.it F=sip:0119084086 at c.voceblu.it
T=sip:0322259098 at c.voceblu.it IP=178.255.188.147:58296 (127.0.0.1:5060)
ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'

Nov  6 10:43:44 centrale03 proxy[3507]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:centrale03.avanzati.it
ID=418017e2-baee-4baa-9e60-13e95ebc6f5b UA='Gigaset T440/T640'

this is a different customer with a Gigaset PBX with a PJSIP trunk
c.voceblu.it is a valid local domain as well as centrale03.avanzati.it

What happens if I disable that part of the script?



Il giorno 6 novembre 2017 @ 10:04:39, stefanormc (stefanormc at gmail.com) ha
scritto:

I have both domains configured, one is a reseller.
There are approx 100 subscribers working on each domain but they are both
giving the same error on the same device, a grandstream ht701 ATA

if by local domain you mean configured under ‘domains’ in spce, then they
both are. I have not configured the dns proxy name as suggested by Henk
yet. I’ll try that today.

# Reseller Domain
6 PSA voceblu.it
7 G-Eva geva.voceblu.it


thanks

ciao

stefano


Il giorno 6 novembre 2017 @ 09:43:52, Daniel Grotti (dgrotti at sipwise.com)
ha scritto:

Hi Stefano,
looks like veceblu.it is not a local domain, the check that is failing is
the one provided by Henk:

if($du != $null && is_domain_local("$dd"))

--
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/05/2017 09:29 PM, Henk wrote:

Hi Stefano,
I had to add the DNS name of my server to SPCE as a dummy domain to stop
the loose-routing error. But if I look at your log, it seems you are
using *voceblu.it
<http://voceblu.it>* and not geva.voceblu.it.
<http://geva.voceblu.it> Are both domains existing in SPCE?


In the script (/etc/kamailio/proxy/proxy.cfg) there is a test to see if the
destination uri domain is local, if this fails it produces the loose-route
error:

        if(!has_totag())
        {
            if($du != $null && *is_domain_local("$dd")*)
            {
                xlog("L_INFO", "Reset initial local route - R=$ru ID=$ci
UA='$ua'\n");
                $du = $null;
            }
            else
            {
                xlog("L_NOTICE", "*Initial loose-routing rejected* - R=$ru
ID=$ci UA='$ua'\n");
                sl_send_reply("403", "Initial Loose-Routing Forbidden");
                exit;
            }
        }

Hope this helps,

Regards,

Henk Plessius

On 5-11-2017 19:31, stefanormc wrote:

Hi Henk,

I’m no too sure what you mean. What proxy domain do you refer to?

In my case, user is XXXXX at geva.voceblu.it and I have geva.voceblu.it realm
configured

Proxy is centrale.aXXXXXXti.it that seems to be correctly configured on the
Grandstream ATA

Thanks

ciao

Stefano

On 4 November 2017 at 21:04:09, Henk (henk at voipdigit.nl) wrote:

Hi Stefano,

I had the same problem when I made a connection to an authorization domain
which was not the same as the server address. In some clients you have to
use the proxy setting to specify the server address. The kamailio proxy
checks the domain against the known domains (domain table in the kamailio
db). I solved this by adding the proxy domain in SPCE. Hope this helps for
you too.

Regards,

Henk Plessius

On 4-11-2017 17:13, stefanormc wrote:

Hello again,

Anyone…? No ideas?

I’m stuck

Thanks

Ciao

Stefano



On 3 October 2017 at 14:00:16, stefanormc (stefanormc at gmail.com) wrote:


Hi all,

I just updated to 5.4.1 and I’m experiencing a ‘loose routing’ problem on
outbound calls from certain clients that are correctly registered and have
no problem on inbound calls.

This what I see in spce log:

Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: New request on
proxy - M=INVITE R=sip:0110133301 at voceblu.it;user=phone F=
sip:0119649202 at voceblu.it;user=phone T=sip:0110133301 at voceblu.it;user=phone
IP=172.26.4.92:1024 (127.0.0.1:5060) ID=1052434700-5060-11 at BJC.BGI.B.H
UA='Grandstream HT701 1.0.8.2'
Oct  3 10:55:40 centrale proxy[3476]: NOTICE: <script>: Initial
loose-routing rejected - R=sip:0110133301 at voceblu.it;user=phone
ID=1052434700-5060-11 at BJC.BGI.B.H UA='Grandstream HT701 1.0.8.2’

Outbound calls worked fine before upgrading

Any hint where the problem might lie?

Thanks

stefano



_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user




_______________________________________________
Spce-user mailing
listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user


_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20171106/7c1f6119/attachment-0001.html>


More information about the Spce-user mailing list