[Spce-user] Incoming calls are not working (403 - invalid called party domain)

[Daniel Grotti]

Hi Thonma,
this is not a problem of Rewrting rules, but "Inbound Peering Rules". 
Please check documentation for that.
Please notice, as well, the log:


Field 'to_domain' with value '93.189.171.93' did not match pattern 
'sip\.omnidat\.net'


So the TO header is not accepted by your Inbound peering Rules defined 
in your SIP Peering Group.

Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 02/15/2018 01:44 AM, Thomas Georg wrote:
>
> Hi list,
>
> with debug level 2 I got the following output in kamailio-proxy.log 
>  (thanks to Daniel for this hint):
>
> Feb 15 01:07:39 spce proxy[3215]: NOTICE: <script>: New request on 
> proxy - M=INVITE R=sip:+4971422289800 at 185.156.158.12:5060 
> F=sip:+49854711 at 93.189.171.91 T=sip:+4971422289800 at 93.189.171.93:5060 
> IP=93.189.168.93:5060 (127.0.0.1:5060) 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: INFO: <script>: Load domain 
> preferences for callee - R=sip:+4971422289800 at 185.156.158.12:5060 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: INFO: <script>: Clean domain 
> preferences for callee - R=sip:+4971422289800 at 185.156.158.12:5060 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: NOTICE: <script>: Call from PSTN - 
> R=sip:+4971422289800 at 185.156.158.12:5060 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: INFO: <script>: Checking PSTN peer 
> group '2' - R=sip:+4971422289800 at 185.156.158.12:5060 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: NOTICE: <script>: Field 'to_domain' 
> with value '93.189.171.93' did not match pattern 'sip\.omnidat\.net' - 
> R=sip:+4971422289800 at 185.156.158.12:5060 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: NOTICE: <script>: Rejecting call 
> with 403 - invalid called party domain - 
> R=sip:+4971422289800 at 185.156.158.12:5060 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91 
> UA='Dialogic-SIP/10.5.3.52851 SS7_FRA1_1_1 0'
>
> Feb 15 01:07:39 spce proxy[3215]: INFO: <script>: Runtime for request 
> INVITE was 2562 usec - 
> ID=521c-47c-11520180539-SS7_FRA1_1_1-0-93.189.171.91
>
> After that I built the following rule to replace the ip address with 
> the sip domain
>
> Match pattern: \b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b
>
> Replacement Pattern :                 sip.omnidat.net
>
> Field: Callee
>
> But I got the same output in the log.
>
> Any hints?
>
> Thank you
>
> Thomas
>
> *Von:*Thomas Georg
> *Gesendet:* Sonntag, 11. Februar 2018 10:16
> *An:* 'spce-user at lists.sipwise.com' <spce-user at lists.sipwise.com 
> <mailto:spce-user at lists.sipwise.com>>
> *Betreff:* Call Routing Verfication Test results in Server error 500 
> (sometimes)
>
> Hi,
>
> I am new to sipwise and installed e fresh instance with the iso on my 
> vmware server (4 Cores, 4GB RAM, 128GB HDD).
>
> I did all steps in the manual and am able to call in and out if I dial 
> the number in E.164 format.
>
> If I establish a call with a local number e.g. 08154711 the outbound 
> rule for the callee doesn’t do anything.
>
> I tried to test with the call routing verification tool but sometimes 
> it gives an result (without using the number manipulation) but most of 
> the time I get an 500 Server error.
>
> Any idea? Where are the incident information stored on the  filesystem 
> to debug a little bit by myself?
>
> Regards
>
> Thomas
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20180215/97e0b04a/attachment-0001.html>