[Spce-user] Calling Name Not Displaying

[Daniel Grotti]

Hi Brian,
thanks, you are welcome.
Feel free to post other questions in the mailing list, and remember to 
keep the list in CC.

Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 03/15/2018 06:17 PM, Brian Pelletier wrote:
> Your suggestion did the trick, I had a few other things in there to 
> screwing it up (from other attempts at fixing this) but once I went 
> though every option and reset it to the defaults all was well.  
> Changeling the "outbound_from_display" to "Received Display-Name" was 
> key, thanks you so much.
>
>
> Brian Pelletier
>
>
> ---- On Thu, 15 Mar 2018 12:12:28 -0400 *Daniel Grotti 
> <dgrotti at sipwise.com>* wrote ----
>
>     Hi,
>     you should play with the Domain's preferences called
>     "outbound_from_display" and change accordingly.
>     You have also the option "Received Display-Name" which is to
>     preserve the original display name part received in the incoming
>     INVITE.
>
>     Cheers,
>
>     Daniel
>
>
>
>     On 03/15/2018 04:47 PM, Brian Pelletier wrote:
>
>         I installed SPEC a little more than a month ago and i cant
>         seem to get the calling name to show up on calls to
>         subscribers at all.  i can see that it is being sent to me
>         from the upstream provider:
>         From: "WIRELESS CALLER" <sip:12079518955 at x.x.x.x>
>         <http://mailto:sip:12079518955@x.x.x.x>;tag=sansay63876987rdb10618
>         (i "Xed" of the IP address)
>         but on the capture coming into the router on the subscriber
>         end it looks to be stripped of:
>         From: <sip:12079518955 at testgw1.siliconmaine.com;user=phone>
>         <mailto:sip:12079518955 at testgw1.siliconmaine.com;user=phone>;tag=7F6D5AAC-5AAA91FA0009D735-28367700
>
>         I have tried adjusting the rewrite rules on both the inbound
>         trunk from the provider and on the subscriber side.  I think
>         this is were i would need to make adjusters from what i was
>         reading about the P-asserted tags and stuff but I'm not sure
>         which one would be causing the problem.  Is anyone a little
>         more fluent in this area that may be able to provide a little
>         guidence?
>
>         Brian Pelletier
>
>
>
>         _______________________________________________ Spce-user mailing listSpce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>  https://lists.sipwise.com/listinfo/spce-user  
>
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20180316/a89177e6/attachment.html>