[Spce-user] Problem with Peering Registration

Daniel Grotti dgrotti at sipwise.com
Mon Nov 12 05:56:40 EST 2018


Hi,
please provide your 
//etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2


/

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/12/18 11:54 AM, EMMANUEL AFANG wrote:
> Thanks Daniel for your quick response.
> I did follow this guide, but sipwise does not seem to be sending out 
> REGISTER message to Peer. I captured with tcpdump for more than an 
> hour and not a single REGISTER message was sent from sipwise to peer. 
> This is how I have it setup at the moment:
>
>     Peer configured via sipwise GUI with /peer_auth_user,
>     peer_auth_pass /and /peer_auth_realm/ all set and
>     /peer_auth_register/ checked.
>
>     Also set only the /domain/, /user /and /pwd /in the
>     //etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2
>     /file
>
>
> I tested in lab with softswitch that sends a 407 Authentication 
> Required when it receives an INVITE from sipwise and saw that sipwise 
> successfully authenticates when SIP 407 is sent to it. The callflow 
> for sipwise successful authentication is like this:
>
>     sipwise sends INVITE ---->>  Provider
>     sipwise receives 407 Proxy Authentication Required <<-----  Provider
>     sipwise sends INVITE (with credentials) ---->> Provider
>
>     sipwise receives 180 Ringing <<-----  Provider
>
>
> So I see that indeed sipwise wants the SIP 407 sent to it, before it 
> sends the credentials in an INVITE method. It never sends out the 
> REGISTER method to the peer. Please how then can I achieve the 
> callflow below:
>
>     sipwise sends REGISTER ---->>  Provider
>     sipwise receives 401 Unauthorized <<----- Provider
>     sipwise sends REGISTER (w/credentials) ---->> Provider
>
>
> Will appreciate your feedback on this.
>
> Best Regards
>
> *Emmanuel Afang *
>
> *
> *
>
> Mobile +2347084280332
> Email: _a <mailto:cuzomba at dial-mobile.com>fang.emmanuel at gmail.com 
> <mailto:fang.emmanuel at gmail.com>_
>
> Skype: _a <mailto:cuzomba at dial-mobile.com>fang.emmanuel_
>
>
>
>
> On Mon, Nov 12, 2018 at 10:41 AM Daniel Grotti <dgrotti at sipwise.com 
> <mailto:dgrotti at sipwise.com>> wrote:
>
>     Yes,
>     that's possible. How to do that is written in the handbook, under
>     the peering section:
>     https://www.sipwise.com/doc/mr6.5.1/sppro/?_href=ar01s05.html#_registering_at_a_peering_server
>
>
>
>
>     -- 
>     Daniel Grotti
>     Head of Customer Support
>     Sipwise GmbH, Campus 21/Europaring F15
>     AT-2345 Brunn am Gebirge
>
>     Office: +43(0)130120332
>     Email:dgrotti at sipwise.com  <mailto:dgrotti at sipwise.com>
>     Website:https://www.sipwise.com
>
>     On 11/12/18 10:35 AM, EMMANUEL AFANG wrote:
>>     Thanks Walter for your response.
>>     Please is it possible to set sipwise so it sends out REGISTER to
>>     peer first, like the callflow below:
>>
>>         sipwise sends REGISTER ---->>  Provider
>>         sipwise receives 401 Unauthorized <<----- Provider
>>         sipwise sends REGISTER (w/credentials) ---->>  Provider
>>
>>
>>     Will appreciate your feedback on this.
>>
>>     Best Regards
>>
>>     *Emmanuel Afang *
>>
>>     *
>>     *
>>
>>     Mobile +2347084280332
>>     Email: _a <mailto:cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>>     <mailto:fang.emmanuel at gmail.com>_
>>
>>     Skype: _a <mailto:cuzomba at dial-mobile.com>fang.emmanuel_
>>
>>
>>
>>
>>     On Sat, Nov 10, 2018 at 3:00 AM Walter Klomp
>>     <walter at myrepublic.net <mailto:walter at myrepublic.net>> wrote:
>>
>>         Hi Emmanuel,
>>
>>         This sounds more a provider issue than Sipwise. Sipwise will
>>         always authenticate with the credentials given a 407 comes back.
>>
>>         Registration is usually only done to announce where inbound
>>         calls need to go to. (Having said that, sipwise should be
>>         sending registrations at least once an hour - did you check
>>         with sngrep or other sniffer that it’s indeed not sending
>>         anything, ever?)
>>
>>         Yours sincerely,
>>         Walter
>>
>>         On 9 Nov 2018, at 10:22 PM, EMMANUEL AFANG
>>         <afang.emmanuel at gmail.com <mailto:afang.emmanuel at gmail.com>>
>>         wrote:
>>
>>>         (got a response from your server that I am not a member but
>>>         posting to members, so I registered and re-posted)
>>>         Hi
>>>         I use the free edition of 3CX and I am able to do
>>>         Registrations with a Peering Partner with the following
>>>         settings (changed):
>>>         *IN 3CX This Works:*
>>>
>>>             Registrar/Server/Gateway Hostname or IP   ==
>>>             sytypeer.com <http://sytypeer.com/>  (port 5096)
>>>             Outbound Proxy                       ==   1.1.1.244  
>>>              (port 5096)
>>>             Type of Authentication                     ==   Register
>>>             Authentication ID (aka SIP User ID)             == 
>>>              11111uuuuu22222
>>>             Authentication Password                   == 
>>>              11111ppppp22222
>>>
>>>
>>>         To configure the equivalence of this on sipwise, I did this:
>>>         *IN SIPWISE CE GUI Peering Servers:*
>>>
>>>             IP Address   ==  1.1.1.244  (port 5096)
>>>             Probing      ==  (checked the box)
>>>
>>>         *IN **SIPWISE CE **GUI Peering Server Preferences:*
>>>
>>>             peer_auth_user      == 11111uuuuu22222
>>>             peer_auth_pass      == 11111ppppp22222
>>>             peer_auth_realm     == sytypeer.com <http://sytypeer.com/>
>>>             peer_auth_register  ==  (checked the box)
>>>
>>>         *IN SIPWISE
>>>         CE /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2*
>>>
>>>             domain=sytypeer.com <http://sytypeer.com/>
>>>             user=11111uuuuu22222
>>>             pwd=11111ppppp22222
>>>             (the description says: 'Only set "domain", "user" and
>>>             "pwd", and leave "proxy" and "contact" EXACTLY')
>>>
>>>
>>>         With the above SIPWISE settings, I still am not able to
>>>         REGISTER with partner. In fact, SIPWISE is NOT sending
>>>         REGISTRATIONS. The callflow is like this:
>>>         sipwise sends INVITE ---->> Provider
>>>         sipwise receives 100 Trying <<-----  Provider
>>>         sipwise receives 403 Forbidden <<-----  Provider
>>>         sipwise sends ACK ---->> Provider
>>>
>>>         What I am thinking is whether sipwise was expecting to get a
>>>         /407 Proxy Authentication Required/ before it performs the
>>>         REGISTRATION, if so, how do I make sipwise REGISTER with
>>>         peer partner like 3CX does?
>>>
>>>         Best Regards
>>>
>>>         *Emmanuel Afang *
>>>
>>>         *
>>>         *
>>>
>>>         Mobile +2347084280332
>>>         Email: _a
>>>         <mailto:cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>>>         <mailto:fang.emmanuel at gmail.com>_
>>>
>>>         Skype: _a <mailto:cuzomba at dial-mobile.com>fang.emmanuel_
>>>
>>>
>>>
>>>
>>>         On Fri, Nov 9, 2018 at 3:11 PM EMMANUEL AFANG
>>>         <afang.emmanuel at gmail.com <mailto:afang.emmanuel at gmail.com>>
>>>         wrote:
>>>
>>>             Hi
>>>             I use the free edition of 3CX and I am able to do
>>>             Registrations with a Peering Partner with the following
>>>             settings (changed):
>>>             *IN 3CX This Works:*
>>>
>>>                 Registrar/Server/Gateway Hostname or IP   ==
>>>                 sytypeer.com <http://sytypeer.com>  (port 5096)
>>>                 Outbound Proxy                           ==
>>>                  1.1.1.244     (port 5096)
>>>                 Type of Authentication                         ==
>>>                  Register
>>>                 Authentication ID (aka SIP User ID)             ==
>>>                  11111uuuuu22222
>>>                 Authentication Password                       ==
>>>                  11111ppppp22222
>>>
>>>
>>>             To configure the equivalence of this on sipwise, I did this:
>>>             *IN SIPWISE CE GUI Peering Servers:*
>>>
>>>                 IP Address   ==  1.1.1.244 (port 5096)
>>>                 Probing      ==  (checked the box)
>>>
>>>             *IN **SIPWISE CE **GUI Peering Server Preferences:*
>>>
>>>                 peer_auth_user      == 11111uuuuu22222
>>>                 peer_auth_pass      == 11111ppppp22222
>>>                 peer_auth_realm     == sytypeer.com
>>>                 <http://sytypeer.com>
>>>                 peer_auth_register  == (checked the box)
>>>
>>>             *IN SIPWISE
>>>             CE /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2*
>>>
>>>                 domain=sytypeer.com <http://sytypeer.com>
>>>                 user=11111uuuuu22222
>>>                 pwd=11111ppppp22222
>>>                 (the description says: 'Only set "domain", "user"
>>>                 and "pwd", and leave "proxy" and "contact" EXACTLY')
>>>
>>>
>>>             With the above SIPWISE settings, I still am not able to
>>>             REGISTER with partner. In fact, SIPWISE is NOT sending
>>>             REGISTRATIONS. The callflow is like this:
>>>             sipwise sends INVITE ---->>  Provider
>>>             sipwise receives 100 Trying <<-----  Provider
>>>             sipwise receives 403 Forbidden <<-----  Provider
>>>             sipwise sends ACK ---->> Provider
>>>
>>>             What I am thinking is whether sipwise was expecting to
>>>             get a /407 Proxy Authentication Required/ before it
>>>             performs the REGISTRATION, if so, how do I make sipwise
>>>             REGISTER with peer partner like 3CX does?
>>>
>>>
>>>             Best Regards
>>>
>>>             *Emmanuel Afang *
>>>
>>>             *
>>>             *
>>>
>>>             Mobile +2347084280332
>>>             Email: _a
>>>             <mailto:cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>>>             <mailto:fang.emmanuel at gmail.com>_
>>>
>>>             Skype: _a <mailto:cuzomba at dial-mobile.com>fang.emmanuel_
>>>
>>>
>>>         _______________________________________________
>>>         Spce-user mailing list
>>>         Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>>         https://lists.sipwise.com/listinfo/spce-user
>>
>>         The contents of this email and any attachments are
>>         confidential and may also be privileged. You must not
>>         disseminate the contents of this email and any attachments
>>         without permission of the sender. If you have received this
>>         email by mistake, please delete all copies and inform the
>>         sender immediately. You may refer to our company's Privacy
>>         Policy here
>>         <https://myrepublic.net/sg/legal/terms-of-use-policies/privacy-policy/>.
>>
>>
>>     _______________________________________________
>>     Spce-user mailing list
>>     Spce-user at lists.sipwise.com  <mailto:Spce-user at lists.sipwise.com>
>>     https://lists.sipwise.com/listinfo/spce-user
>
>     _______________________________________________
>     Spce-user mailing list
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>     https://lists.sipwise.com/listinfo/spce-user
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20181112/a3e2f770/attachment-0001.html>


More information about the Spce-user mailing list