[Spce-user] Problem with Peering Registration
EMMANUEL AFANG
afang.emmanuel at gmail.com
Mon Nov 12 10:31:57 EST 2018
Thanks for the response Daniel
But that did not resolve it. I applied the setting and even rebooted
server. Then captured again with tcpdump and sipwise is still not sending
REGISTER.
Any ideas what could be the problem?
Best Regards
*Emmanuel Afang *
Mobile +2347084280332
Email: *a <cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
<fang.emmanuel at gmail.com>*
Skype: *a <cuzomba at dial-mobile.com>fang.emmanuel*
On Mon, Nov 12, 2018 at 12:38 PM Daniel Grotti <dgrotti at sipwise.com> wrote:
> Hi,
> the problem is that you must comment out also
>
>
> *#proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]*
> *[% IF sip_adv_ips.size -%]*
> *#contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]*
> *[% ELSE -%]*
> *#contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]*
> *[% END -%]*
>
>
> so your code shouls look like
>
>
> *domain=**sipdomain.com <http://sipdomain.com>*
> *user=sipuser*
> *pwd=sippassword*
> *proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]*
> *[% IF sip_adv_ips.size -%]*
> *contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]*
> *[% ELSE -%]*
> *contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]*
> *[% END -%]*
>
>
>
>
> --
> Daniel Grotti
> Head of Customer Support
> Sipwise GmbH, Campus 21/Europaring F15
> AT-2345 Brunn am Gebirge
>
> Office: +43(0)130120332
> Email: dgrotti at sipwise.com
> Website: https://www.sipwise.com
>
> On 11/12/18 12:05 PM, EMMANUEL AFANG wrote:
>
> Hi Daniel
> You asked for content of:
> */etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2*
> But I am sending you content of:
> */etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2*
>
> sipuser at sipwise:~# cat
>> /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2
>> [% argv.role='lb'; argv.type='sip_ext'; PROCESS
>> '/usr/lib/ngcp-ngcpcfg/get_all_shared_ips'; sip_ext_ips = out -%]
>> [% IF !sip_ext_ips.size -%]
>> [% argv.role='lb'; argv.type='sip_ext'; PROCESS
>> '/usr/lib/ngcp-ngcpcfg/get_all_ips'; sip_ext_ips = out -%]
>> [% END -%]
>> [% argv.role='lb'; argv.type='sip_int'; PROCESS
>> '/usr/lib/ngcp-ngcpcfg/get_all_shared_ips'; sip_lb_ips = out -%]
>> [% IF !sip_lb_ips.size -%]
>> [% argv.role='lb'; argv.type='sip_int'; PROCESS
>> '/usr/lib/ngcp-ngcpcfg/get_all_ips'; sip_lb_ips = out -%]
>> [% END -%]
>> [% argv.role='lb'; argv.type='sip_ext'; PROCESS
>> '/usr/lib/ngcp-ngcpcfg/get_all_adv_ips'; sip_adv_ips = out -%]
>> # IMPORTANT:
>> # Only set "domain", "user" and "pwd", and leave "proxy" and "contact"
>> EXACTLY
>> # as is to make outbound registrations to work.
>> #
>> # Note that the "contact" parameter is specific to the Sipwise SPCE and
>> does
>> # not yet exist in the official sems.
>> domain=sipdomain.com
>> user=sipuser
>> pwd=sippassword
>> #domain=<your peer realm>
>> #user=<your peer user>
>> #pwd=<your peer password>
>> #proxy=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
>> [% IF sip_adv_ips.size -%]
>> #contact=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
>> [% ELSE -%]
>> #contact=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
>> [% END -%]
>> #domain1=<your peer realm>
>> #user1=<your peer user>
>> #pwd1=<your peer password>
>> #proxy1=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
>> [% IF sip_adv_ips.size -%]
>> #contact1=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
>> [% ELSE -%]
>> #contact1=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
>> [% END %]
>> #domain2=<your peer realm>
>> #user2=<your peer user>
>> #pwd2=<your peer password>
>> #proxy2=sip:[% sip_lb_ips.0 %]:[% kamailio.lb.port %]
>> [% IF sip_adv_ips.size -%]
>> #contact2=sip:[% sip_adv_ips.0 %]:[% kamailio.lb.port %]
>> [% ELSE -%]
>> #contact2=sip:[% sip_ext_ips.0 %]:[% kamailio.lb.port %]
>> [% END %]
>> # Up to 50 registrations are possible.
>
>
>
>
>
> Best Regards
>
>
>
> *Emmanuel Afang *
>
>
> Mobile +2347084280332
> Email: *a <cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
> <fang.emmanuel at gmail.com>*
>
> Skype: *a <cuzomba at dial-mobile.com>fang.emmanuel*
>
>
>
> On Mon, Nov 12, 2018 at 11:56 AM Daniel Grotti <dgrotti at sipwise.com>
> wrote:
>
>> Hi,
>> please provide your
>>
>>
>> */etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.customtt.tt2
>> *
>>
>> --
>> Daniel Grotti
>> Head of Customer Support
>> Sipwise GmbH, Campus 21/Europaring F15
>> AT-2345 Brunn am Gebirge
>>
>> Office: +43(0)130120332
>> Email: dgrotti at sipwise.com
>> Website: https://www.sipwise.com
>>
>> On 11/12/18 11:54 AM, EMMANUEL AFANG wrote:
>>
>> Thanks Daniel for your quick response.
>> I did follow this guide, but sipwise does not seem to be sending out
>> REGISTER message to Peer. I captured with tcpdump for more than an hour and
>> not a single REGISTER message was sent from sipwise to peer. This is how I
>> have it setup at the moment:
>>
>> Peer configured via sipwise GUI with *peer_auth_user, peer_auth_pass *and
>> *peer_auth_realm* all set and *peer_auth_register* checked.
>>
>> Also set only the *domain*, *user *and *pwd *in the */etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2
>> *file
>>
>>
>> I tested in lab with softswitch that sends a 407 Authentication Required
>> when it receives an INVITE from sipwise and saw that sipwise successfully
>> authenticates when SIP 407 is sent to it. The callflow for sipwise
>> successful authentication is like this:
>>
>> sipwise sends INVITE ---->> Provider
>> sipwise receives 407 Proxy Authentication Required <<----- Provider
>> sipwise sends INVITE (with credentials) ---->> Provider
>>
>> sipwise receives 180 Ringing <<----- Provider
>>
>>
>> So I see that indeed sipwise wants the SIP 407 sent to it, before it
>> sends the credentials in an INVITE method. It never sends out the REGISTER
>> method to the peer. Please how then can I achieve the callflow below:
>>
>> sipwise sends REGISTER ---->> Provider
>> sipwise receives 401 Unauthorized <<----- Provider
>> sipwise sends REGISTER (w/credentials) ---->> Provider
>>
>>
>> Will appreciate your feedback on this.
>>
>> Best Regards
>>
>>
>>
>> *Emmanuel Afang *
>>
>>
>> Mobile +2347084280332
>> Email: *a <cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>> <fang.emmanuel at gmail.com>*
>>
>> Skype: *a <cuzomba at dial-mobile.com>fang.emmanuel*
>>
>>
>>
>> On Mon, Nov 12, 2018 at 10:41 AM Daniel Grotti <dgrotti at sipwise.com>
>> wrote:
>>
>>> Yes,
>>> that's possible. How to do that is written in the handbook, under the
>>> peering section:
>>> https://www.sipwise.com/doc/mr6.5.1/sppro/?_href=ar01s05.html#_registering_at_a_peering_server
>>>
>>>
>>>
>>>
>>> --
>>> Daniel Grotti
>>> Head of Customer Support
>>> Sipwise GmbH, Campus 21/Europaring F15
>>> AT-2345 Brunn am Gebirge
>>>
>>> Office: +43(0)130120332
>>> Email: dgrotti at sipwise.com
>>> Website: https://www.sipwise.com
>>>
>>> On 11/12/18 10:35 AM, EMMANUEL AFANG wrote:
>>>
>>> Thanks Walter for your response.
>>> Please is it possible to set sipwise so it sends out REGISTER to peer
>>> first, like the callflow below:
>>>
>>> sipwise sends REGISTER ---->> Provider
>>> sipwise receives 401 Unauthorized <<----- Provider
>>> sipwise sends REGISTER (w/credentials) ---->> Provider
>>>
>>>
>>> Will appreciate your feedback on this.
>>>
>>> Best Regards
>>>
>>>
>>>
>>> *Emmanuel Afang *
>>>
>>>
>>> Mobile +2347084280332
>>> Email: *a <cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>>> <fang.emmanuel at gmail.com>*
>>>
>>> Skype: *a <cuzomba at dial-mobile.com>fang.emmanuel*
>>>
>>>
>>>
>>> On Sat, Nov 10, 2018 at 3:00 AM Walter Klomp <walter at myrepublic.net>
>>> wrote:
>>>
>>>> Hi Emmanuel,
>>>>
>>>> This sounds more a provider issue than Sipwise. Sipwise will always
>>>> authenticate with the credentials given a 407 comes back.
>>>>
>>>> Registration is usually only done to announce where inbound calls need
>>>> to go to. (Having said that, sipwise should be sending registrations at
>>>> least once an hour - did you check with sngrep or other sniffer that it’s
>>>> indeed not sending anything, ever?)
>>>>
>>>> Yours sincerely,
>>>> Walter
>>>>
>>>> On 9 Nov 2018, at 10:22 PM, EMMANUEL AFANG <afang.emmanuel at gmail.com>
>>>> wrote:
>>>>
>>>> (got a response from your server that I am not a member but posting to
>>>> members, so I registered and re-posted)
>>>> Hi
>>>> I use the free edition of 3CX and I am able to do Registrations with a
>>>> Peering Partner with the following settings (changed):
>>>> *IN 3CX This Works:*
>>>>
>>>> Registrar/Server/Gateway Hostname or IP == sytypeer.com (port
>>>> 5096)
>>>> Outbound Proxy ==
>>>> 1.1.1.244 (port 5096)
>>>> Type of Authentication == Register
>>>> Authentication ID (aka SIP User ID) == 11111uuuuu22222
>>>> Authentication Password ==
>>>> 11111ppppp22222
>>>>
>>>>
>>>> To configure the equivalence of this on sipwise, I did this:
>>>> *IN SIPWISE CE GUI Peering Servers:*
>>>>
>>>> IP Address == 1.1.1.244 (port 5096)
>>>> Probing == (checked the box)
>>>>
>>>> *IN **SIPWISE CE **GUI Peering Server Preferences:*
>>>>
>>>> peer_auth_user == 11111uuuuu22222
>>>> peer_auth_pass == 11111ppppp22222
>>>> peer_auth_realm == sytypeer.com
>>>> peer_auth_register == (checked the box)
>>>>
>>>> *IN SIPWISE
>>>> CE /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2*
>>>>
>>>> domain=sytypeer.com
>>>> user=11111uuuuu22222
>>>> pwd=11111ppppp22222
>>>> (the description says: 'Only set "domain", "user" and "pwd", and leave
>>>> "proxy" and "contact" EXACTLY')
>>>>
>>>>
>>>> With the above SIPWISE settings, I still am not able to REGISTER with
>>>> partner. In fact, SIPWISE is NOT sending REGISTRATIONS. The callflow is
>>>> like this:
>>>> sipwise sends INVITE ---->> Provider
>>>> sipwise receives 100 Trying <<----- Provider
>>>> sipwise receives 403 Forbidden <<----- Provider
>>>> sipwise sends ACK ---->> Provider
>>>>
>>>> What I am thinking is whether sipwise was expecting to get a *407
>>>> Proxy Authentication Required* before it performs the REGISTRATION, if
>>>> so, how do I make sipwise REGISTER with peer partner like 3CX does?
>>>>
>>>> Best Regards
>>>>
>>>>
>>>>
>>>> *Emmanuel Afang *
>>>>
>>>>
>>>> Mobile +2347084280332
>>>> Email: *a <cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>>>> <fang.emmanuel at gmail.com>*
>>>>
>>>> Skype: *a <cuzomba at dial-mobile.com>fang.emmanuel*
>>>>
>>>>
>>>>
>>>> On Fri, Nov 9, 2018 at 3:11 PM EMMANUEL AFANG <afang.emmanuel at gmail.com>
>>>> wrote:
>>>>
>>>>> Hi
>>>>> I use the free edition of 3CX and I am able to do Registrations with a
>>>>> Peering Partner with the following settings (changed):
>>>>> *IN 3CX This Works:*
>>>>>
>>>>> Registrar/Server/Gateway Hostname or IP == sytypeer.com (port
>>>>> 5096)
>>>>> Outbound Proxy ==
>>>>> 1.1.1.244 (port 5096)
>>>>> Type of Authentication == Register
>>>>> Authentication ID (aka SIP User ID) == 11111uuuuu22222
>>>>> Authentication Password ==
>>>>> 11111ppppp22222
>>>>>
>>>>>
>>>>> To configure the equivalence of this on sipwise, I did this:
>>>>> *IN SIPWISE CE GUI Peering Servers:*
>>>>>
>>>>> IP Address == 1.1.1.244 (port 5096)
>>>>> Probing == (checked the box)
>>>>>
>>>>> *IN **SIPWISE CE **GUI Peering Server Preferences:*
>>>>>
>>>>> peer_auth_user == 11111uuuuu22222
>>>>> peer_auth_pass == 11111ppppp22222
>>>>> peer_auth_realm == sytypeer.com
>>>>> peer_auth_register == (checked the box)
>>>>>
>>>>> *IN SIPWISE
>>>>> CE /etc/ngcp-config/templates/etc/ngcp-sems/etc/reg_agent.conf.tt2*
>>>>>
>>>>> domain=sytypeer.com
>>>>> user=11111uuuuu22222
>>>>> pwd=11111ppppp22222
>>>>> (the description says: 'Only set "domain", "user" and "pwd", and leave
>>>>> "proxy" and "contact" EXACTLY')
>>>>>
>>>>>
>>>>> With the above SIPWISE settings, I still am not able to REGISTER with
>>>>> partner. In fact, SIPWISE is NOT sending REGISTRATIONS. The callflow is
>>>>> like this:
>>>>> sipwise sends INVITE ---->> Provider
>>>>> sipwise receives 100 Trying <<----- Provider
>>>>> sipwise receives 403 Forbidden <<----- Provider
>>>>> sipwise sends ACK ---->> Provider
>>>>>
>>>>> What I am thinking is whether sipwise was expecting to get a *407
>>>>> Proxy Authentication Required* before it performs the REGISTRATION,
>>>>> if so, how do I make sipwise REGISTER with peer partner like 3CX does?
>>>>>
>>>>>
>>>>> Best Regards
>>>>>
>>>>>
>>>>>
>>>>> *Emmanuel Afang *
>>>>>
>>>>>
>>>>> Mobile +2347084280332
>>>>> Email: *a <cuzomba at dial-mobile.com>fang.emmanuel at gmail.com
>>>>> <fang.emmanuel at gmail.com>*
>>>>>
>>>>> Skype: *a <cuzomba at dial-mobile.com>fang.emmanuel*
>>>>>
>>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> https://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>
>>>> The contents of this email and any attachments are confidential and may
>>>> also be privileged. You must not disseminate the contents of this email and
>>>> any attachments without permission of the sender. If you have received this
>>>> email by mistake, please delete all copies and inform the sender
>>>> immediately. You may refer to our company's Privacy Policy here
>>>> <https://myrepublic.net/sg/legal/terms-of-use-policies/privacy-policy/>
>>>> .
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing listSpce-user at lists.sipwise.comhttps://lists.sipwise.com/listinfo/spce-user
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> https://lists.sipwise.com/listinfo/spce-user
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20181112/067ad295/attachment-0001.html>
More information about the Spce-user
mailing list