[Spce-user] Force internal Calls to SBC

[Daniel Grotti]

Hi,
If you need to send out the call to x2, you should set in x2 preferences 
the *"force_inbound_call_to_peer"*.
inbound call to x2 will be forwarded outside. (I think this is your case)

if you need to send out each call FROM x1, in this case you should set 
in x1 preferences the *"force_outbound_call_to_peer"*.


-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 11/15/18 4:50 PM, Hohl Matthias wrote:
>
> Hello,
>
> in your subscriber preferences under “internal” there is the settings 
> “force_outbound_calls_to_peer”.
>
> I am not sure, but I think this should to the trick.
>
> You have to enable this at each subscriber you want to call over a 
> peering. You can also set it globally in your domain settings.
>
> I hope this helps.
>
> *Von:*Spce-user <spce-user-bounces at lists.sipwise.com> *Im Auftrag von 
> *Alessandro Romano
> *Gesendet:* Donnerstag, 15. November 2018 16:46
> *An:* spce-user at lists.sipwise.com
> *Betreff:* [Spce-user] Force internal Calls to SBC
>
> Dear All,
>
> i need to force the calls from internal users to go to the sbc
>
> example
>
> i have 089xxxx1 and 089xxxx2 that are registered on c5
>
> to call from x1 to x2 i need : x1 -> c5 -> sbc -> c5 -> x2
>
> is possible and what is the procedure
>
> BR
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20181115/19c6fb87/attachment-0001.html>