[Spce-user] networking

[Tomi Hakkarainen]

Hi Daniel,

Thank you for the correct syntax highly appreciated.

But I’m still not able to get this working.

I was adding new interface to be used but not able to get it enabled with adding configuration to network.yml and running ngcpcfg apply

also tried to run separatedly ngcpcfg build ,ngcpcfg commit and systemctl daemon-reload without luck.

There is no errors outputted etc… and the configuration on /etc/network/interfaces is also intact

what could I be missing here ?

+---------------------------+---------------------------------------------- 2018-10-03 19:43:32 -+
| xxx.xxx.xxx.xx            | NGCP: CE mr6.3.1                                                   |
| spce                      | NGCP: subscribers:2 locations:0 calls:0                            |
| spce.                     |   OS: stretch (9.5) 4.9.0-8-amd64 SMP (ext4)                       |
| (PRODUCTION - ACTIVE)     |  CPU: 8 = 2 x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (HT)       |
|                           | BIOS: 6.00 (04/14/2014) by Phoenix Technologies...                 |
|                           |  RAM: 7.8G (used 25%/cache 62%) kamailio[9.3%] perl-fcgi[5.2%]     |
|                           |   LA: system load OK: 0.11 0.24 0.26                               |
|                           |  HDD: space used /[8%]                                             |
|                           |  HDD: inodes in use /[4%]                                          |
|                           |  CFG: [8f1e7a0] commiting uncommented changes  (9 minutes ago)     |
|                           | NGCP: active node has no registrations, strange for production     |
|                           | NGCP: active node has no calls, strange for production             |
|                           | MODs: License OFF,                                                 |
+-------------------7 sec---+-----  ---------------------------------------6.3.1.1+0~mr6.3.1.1---+

Tomi

On 3 Oct 2018, at 11.44, Daniel Grotti <dgrotti at sipwise.com> wrote:

Hi,
syntax example:

post_up:
      - route add -net 1.2.3.0/21 gw 192.168.1.1 dev vlan300


Cheers,

-- 
Daniel Grotti
Head of Customer Support
Sipwise GmbH, Campus 21/Europaring F15
AT-2345 Brunn am Gebirge

Office: +43(0)130120332
Email: dgrotti at sipwise.com
Website: https://www.sipwise.com

On 10/02/2018 11:55 PM, Tomi Hakkarainen wrote:
> Hi U all,
> 
> What would be the correct format to make a static ip route on CE network interface on /etc/ngcp-config/network.yml ?
> 
> I think I should use:
> 	• post_up: routes can be defined here (interface-based routing)
> but cannot figure how to add destination ip,  mask and  gw
> 
> something like this ?
> 
> etc1:
> post-up:
>   - to: 192.168.1.1/0
>     via: 10.0.0.1
> 
> 
> 
> 
> Regards Tomi
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> https://lists.sipwise.com/listinfo/spce-user

_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
https://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20181003/c926bfcf/attachment-0001.html>