[Spce-user] Outbound and Inbound not working
Hohl Matthias
matthias.hohl at telematica.at
Fri Sep 21 17:15:57 EDT 2018
Hello,
first of all:
User-Provided CLI '0216894344' taken from From-User as fallback, should be from 'from_display'
You didn’t send the UPN in the right header from your pbx.
Also there are no rewrite rules active for subscriber, so the national format is not converted to the E.164 format (0216894344 =>> 27216894344)
So this number is not in your allowed_cli list:
User-provided CLI '0216894344' rejected, using network-provided CLI '27216894344'
Second:
NAT-Reply - S=604 - Does Not Exist Anywhere
Your Peering doesn’t recognize the number.
But same problem as above, you try to call 0718774493… this is NO valid E.164 format. It should be 27718774493
I suggest you should read again the handbook about rewrite rules and how to enable it.
I hope I could help you.
Von: Mzidish Consulting <mzidishconsulting at gmail.com>
Gesendet: Freitag, 21. September 2018 22:07
An: Matthias Hohl <matthias.hohl at telematica.at>
Betreff: Re: [Spce-user] Outbound and Inbound not working
Please see below.
zgrep "y7NTLSD6vkUNITE430Gy_g" /var/log/ngcp/kamailio-proxy.log
Sep 21 11:43:29 spce proxy[5049]: NOTICE: <script>: New request on proxy - M=INVITE R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS F=sip:0216894344 at 192.168.130.250 <mailto:sip%3A0216894344 at 192.168.130.250> ;transport=TLS T=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS IP=41.114.39.251:54638 <http://41.114.39.251:54638> (192.168.130.250:5060 <http://192.168.130.250:5060> ) ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod' DESTIP=192.168.130.250:5062 <http://192.168.130.250:5062>
Sep 21 11:43:29 spce proxy[5049]: NOTICE: <script>: Sending reply S=100 Trying fs='192.168.130.250:5062 <http://192.168.130.250:5062> ' du='192.168.130.250:5060 <http://192.168.130.250:5060> ' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5049]: NOTICE: <script>: Authentication failed, no credentials - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod' Auth=<null>
Sep 21 11:43:29 spce proxy[5049]: NOTICE: <script>: Sending reply S=407 fs='192.168.130.250:5062 <http://192.168.130.250:5062> ' du='192.168.130.250:5060 <http://192.168.130.250:5060> ' - ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5044]: NOTICE: <script>: New request on proxy - M=ACK R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS F=sip:0216894344 at 192.168.130.250 <mailto:sip%3A0216894344 at 192.168.130.250> ;transport=TLS T=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS IP=<null>:<null> (192.168.130.250:5060 <http://192.168.130.250:5060> ) ID=y7NTLSD6vkUNITE430Gy_g.. UA='<null>' DESTIP=192.168.130.250:5062 <http://192.168.130.250:5062>
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: New request on proxy - M=INVITE R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS F=sip:0216894344 at 192.168.130.250 <mailto:sip%3A0216894344 at 192.168.130.250> ;transport=TLS T=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS IP=41.114.39.251:54638 <http://41.114.39.251:54638> (192.168.130.250:5060 <http://192.168.130.250:5060> ) ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod' DESTIP=192.168.130.250:5062 <http://192.168.130.250:5062>
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Sending reply S=100 Trying fs='192.168.130.250:5062 <http://192.168.130.250:5062> ' du='192.168.130.250:5060 <http://192.168.130.250:5060> ' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Sending reply S=101 Connecting fs='192.168.130.250:5062 <http://192.168.130.250:5062> ' du='192.168.130.250:5060 <http://192.168.130.250:5060> ' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Dialog managed, lua_dlg_callid:[y7NTLSD6vkUNITE430Gy_g..] - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: User-Provided CLI '0216894344' taken from From-User as fallback, should be from 'from_display' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: User-provided CLI '0216894344' rejected, using network-provided CLI '27216894344' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Callee is not local - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Call to SIP Peering - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '0718774493' and called part 'sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0216894344|192.168.130.250|27216894344|||2|||0|call|41.114.39.251|1537523009.781048||||||||||||27216894344||||' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting acc destination-leg for uuid '0': '0|||0|0718774493|0|0718774493|192.168.130.10|0718774493|192.168.130.250|2||||||||||||0718774493|||' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting P-Called-Party-ID '<sip:0718774493 at 192.168.130.10 <mailto:sip%3A0718774493 at 192.168.130.10> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting 'sip:192.168.130.10:5060 <http://192.168.130.10:5060> ' taken from R-URI as next hop after lb for PSTN call - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Forcing outbound socket 'udp:192.168.130.250:6060 <http://192.168.130.250:6060> ' to peer - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Appending P-D-URI 'sip:192.168.130.250:5060;received=sip:192.168.130.10:5060%3blr%3btransport%3dudp;socket='udp:192.168.130.250:6060 <http://192.168.130.250:6060> '' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Forcing request via B2BUA 'sip:192.168.130.250:5080 <http://192.168.130.250:5080> ' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Request leaving server, M=INVITE fs='192.168.130.250:5062 <http://192.168.130.250:5062> ' du='192.168.130.250:5080 <http://192.168.130.250:5080> ' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5043]: NOTICE: <script>: NAT-Reply - S=100 - Connecting M=INVITE IP=41.114.39.251:54638 <http://41.114.39.251:54638> (192.168.130.250:5080 <http://192.168.130.250:5080> ) ID=y7NTLSD6vkUNITE430Gy_g.. UA='<null>' DESTIP=192.168.130.250:5062 <http://192.168.130.250:5062>
Sep 21 11:43:29 spce proxy[5045]: NOTICE: <script>: NAT-Reply - S=604 - Does Not Exist Anywhere M=INVITE IP=41.114.39.251:54638 <http://41.114.39.251:54638> (192.168.130.250:5080 <http://192.168.130.250:5080> ) ID=y7NTLSD6vkUNITE430Gy_g.. UA='<null>' DESTIP=192.168.130.250:5062 <http://192.168.130.250:5062>
Sep 21 11:43:29 spce proxy[5045]: NOTICE: <script>: Sending reply S=604 M=INVITE fs='192.168.130.250:5062 <http://192.168.130.250:5062> ' du='192.168.130.250 <http://192.168.130.250> :<null>' - ID=y7NTLSD6vkUNITE430Gy_g.. UA='<null>'
Sep 21 11:43:29 spce proxy[5045]: NOTICE: <script>: Failure route for PSTN call - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5045]: NOTICE: <script>: No failover routing needed for this response code - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5045]: NOTICE: <script>: [dialog:failed] decreased redis counters lua_dlg_callid:[y7NTLSD6vkUNITE430Gy_g..] - R=<null> ID=y7NTLSD6vkUNITE430Gy_g.. UA='<null>'
Sep 21 11:43:29 spce proxy[5047]: NOTICE: <script>: New request on proxy - M=ACK R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS F=sip:0216894344 at 192.168.130.250 <mailto:sip%3A0216894344 at 192.168.130.250> ;transport=TLS T=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS IP=192.168.130.250:5060 <http://192.168.130.250:5060> (192.168.130.250:5060 <http://192.168.130.250:5060> ) ID=y7NTLSD6vkUNITE430Gy_g.. UA='<null>' DESTIP=192.168.130.250:5062 <http://192.168.130.250:5062>
On Fri, Sep 21, 2018 at 9:26 PM Matthias Hohl <matthias.hohl at telematica.at <mailto:matthias.hohl at telematica.at> > wrote:
Without the call Id log for inbound and outbound it is hard to say, whats the problem.
Am 21.09.2018 um 19:57 schrieb Mzidish Consulting <mzidishconsulting at gmail.com <mailto:mzidishconsulting at gmail.com> >:
Hi
Unfortunately I can't give you the logs right now, in the mean time can you please confirm the settings for inbound peering rule to route to my subscriber 27216894344. please confirm the match field and the pattern. I want to first the test the inbound.
Warm regards
On Fri, Sep 21, 2018 at 6:20 PM Hohl Matthias <matthias.hohl at telematica.at <mailto:matthias.hohl at telematica.at> > wrote:
Hello,
grep again with the ID of your call…
you grep by number: 27216894344 but then there is not full log.
You need to log wit that:
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R= <mailto:sip%3A0718774493 at 192.168.130.250> sip:0718774493 at 192.168.130.250;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
So do it again with :
zgrep " y7NTLSD6vkUNITE430Gy_g" /var/log/ngcp/kamailio-proxy.log
Von: Mzidish Consulting <mzidishconsulting at gmail.com <mailto:mzidishconsulting at gmail.com> >
Gesendet: Freitag, 21. September 2018 17:52
An: matthias.hohl at telematica.at <mailto:matthias.hohl at telematica.at>
Cc: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
Betreff: Re: [Spce-user] Outbound and Inbound not working
Hi
Yes, I will try.
zgrep "27216894344" /var/log/ngcp/kamailio-proxy.log
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '0718774493' and called part 'sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TLS ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.39.251|1537523009.781048||||||||||||27216894344||||' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 11:43:29 spce proxy[5046]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=y7NTLSD6vkUNITE430Gy_g.. UA='Zoiper rv2.8.101-mod'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '0718774493' and called part 'sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.18.188|1537526379.133155||||||||||||27216894344||||' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:39:39 spce proxy[5048]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=tJK94sWXYuSeuGbEuG1FkQ.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '0718774493' and called part 'sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.18.188|1537526567.926003||||||||||||27216894344||||' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 12:42:47 spce proxy[5046]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=sBT2fgOfT-vy1-TQx9VZYg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '0718774493' and called part 'sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP' - R=sip:0718774493 at 192.168.130.250 <mailto:sip%3A0718774493 at 192.168.130.250> ;transport=TCP ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.3.128|1537528838.218143||||||||||||27216894344||||' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:20:38 spce proxy[5042]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:0718774493 at 192.168.130.10:5060;transport=udp ID=mnT5t2rcUMfFXKcLCjDlqA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '27112000' and called part 'sip:27112000 at 192.168.130.250 <mailto:sip%3A27112000 at 192.168.130.250> ;transport=TCP' - R=sip:27112000 at 192.168.130.250 <mailto:sip%3A27112000 at 192.168.130.250> ;transport=TCP ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.3.128|1537528893.882602||||||||||||27216894344||||' - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:33 spce proxy[5046]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=5cxX3HsTIzSFjV4nQ8lJ5g.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '27112000' and called part 'sip:27112000 at 192.168.130.250 <mailto:sip%3A27112000 at 192.168.130.250> ;transport=TCP' - R=sip:27112000 at 192.168.130.250 <mailto:sip%3A27112000 at 192.168.130.250> ;transport=TCP ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.3.128|1537528909.504682||||||||||||27216894344||||' - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:21:49 spce proxy[5046]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:27112000 at 192.168.130.10:5060;transport=udp ID=W2qV5uM5Zeu3748kYcPyUg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:27637863556 at 192.168.130.250 <mailto:sip%3A27637863556 at 192.168.130.250> ;transport=TCP ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:27637863556 at 192.168.130.250 <mailto:sip%3A27637863556 at 192.168.130.250> ;transport=TCP ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:27637863556 at 192.168.130.250 <mailto:sip%3A27637863556 at 192.168.130.250> ;transport=TCP ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Load gws matching calling part 'sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> ' and called user '271127637863556' and called part 'sip:271127637863556 at 192.168.130.250 <mailto:sip%3A271127637863556 at 192.168.130.250> ;transport=TCP' - R=sip:271127637863556 at 192.168.130.250 <mailto:sip%3A271127637863556 at 192.168.130.250> ;transport=TCP ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting acc source-leg for uuid '913788b3-3d9b-40e5-820f-c16db2ee1f55': '913788b3-3d9b-40e5-820f-c16db2ee1f55|0110690400|192.168.130.250|27216894344|||2|||0|call|41.114.3.128|1537528949.430638||||||||||||27216894344||||' - R=sip:271127637863556 at 192.168.130.10:5060;transport=udp ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:271127637863556 at 192.168.130.10:5060;transport=udp ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting From to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:271127637863556 at 192.168.130.10:5060;transport=udp ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting caller_cli_userprov/caller_domain_userprov '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' for upn - R=sip:271127637863556 at 192.168.130.10:5060;transport=udp ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:22:29 spce proxy[5049]: NOTICE: <script>: Setting PAI to '<sip:27216894344 at 192.168.130.250 <mailto:sip%3A27216894344 at 192.168.130.250> >' - R=sip:271127637863556 at 192.168.130.10:5060;transport=udp ID=zpp4f4C7x1S9GPDUqrdGOA.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:23:06 spce proxy[5042]: NOTICE: <script>: User-provided CLI '0110690400' rejected, using network-provided CLI '27216894344' - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=JS4o_HRXP8tv9axZHfJ1pg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:23:06 spce proxy[5042]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating user-provided CLI - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=JS4o_HRXP8tv9axZHfJ1pg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:23:06 spce proxy[5042]: NOTICE: <script>: Setting '27216894344 at 192.168.130.250 <mailto:27216894344 at 192.168.130.250> ' as initiating network-provided CLI - R=sip:2000 at 192.168.130.250 <mailto:sip%3A2000 at 192.168.130.250> ;transport=TCP ID=JS4o_HRXP8tv9axZHfJ1pg.. UA='Z 5.2.6 rv2.8.63'
Sep 21 13:23:06 spce proxy[5042]: NOTICE: <script>: Call to VoiceBox - R=sip:abc27216894344 at voicebox.local;transport=TCP ID=JS4o_HRXP8tv9axZHfJ1pg.. UA='Z 5.2.6 rv2.8.63'
Warm regards
On Fri, Sep 21, 2018 at 5:44 PM Hohl Matthias <matthias.hohl at telematica.at <mailto:matthias.hohl at telematica.at> > wrote:
Hello,
can you copy here the full Kamailio Proxy log of your call?
Just do this and insert your CALL ID:
# zgrep "CALLID" /var/log/ngcp/kamailio-proxy.log
It is easier to analyse your problem as with a SIP log.
Thank you
Von: Spce-user <spce-user-bounces at lists.sipwise.com <mailto:spce-user-bounces at lists.sipwise.com> > Im Auftrag von Mzidish Consulting
Gesendet: Freitag, 21. September 2018 17:28
An: spce-user at lists.sipwise <mailto:spce-user at lists.sipwise>
Betreff: [Spce-user] Outbound and Inbound not working
Hi
I am a newbie and I am struggling in getting spce up and running. I have gone through the handbook I don't know how may times. I have successfully created and registered subscrbers. My problem is that I can not make outbound calls and I also can not receive calls from my ISP.
I created a peer and the default outbound peering rule. When I make an outbound call it does not go through, I get the below messge:
2018/09/21 16:51:38.536879 192.168.130.10:5060 <http://192.168.130.10:5060> -> 192.168.130.250:5060 <http://192.168.130.250:5060>
SIP/2.0 604 Does Not Exist Anywhere
Via: SIP/2.0/UDP 192.168.130.250;branch=z9hG4bK790f.fdf912d2861a7a1cba437c090e8e3b1c.0
Via: SIP/2.0/UDP 192.168.130.250;branch=z9hG4bKsr-Et0g4RYi9qSUNCkc9nPG4T15Qq3f9Rki9TEAQTEAQWkKxXUTwZ05wZgS9nPG4T15Qq3f9Rki9TEAQzNYHZNaLTm2
Cir5cS8T06NRN2FRCQQFdArESAQvjABvjtHnEAQWk*
From: <sip:0216894344 at 192.168.130.250 <mailto:sip%3A0216894344 at 192.168.130.250> >;tag=4EC9ECE8-5BA5057A0006A7F5-65D9B700
To: <sip:0718774493 at 192.168.130.10 <mailto:sip%3A0718774493 at 192.168.130.10> >;tag=d9ydbocc
CSeq: 10 INVITE
Call-ID: H2cRygg7B9vu5TZtNME8xw.._b2b-1
Warning: 399 0.0.B.261.5.105.0.13.24839.0.0.ims.telco.co.za <http://0.0.B.261.5.105.0.13.24839.0.0.ims.telco.co.za> "Unknown caller"
Content-Length: 0
My provider wants me to pass callerID if there is no CallerID, calls will not go through. I changed the inbound_upn to fetch user provided number to From-Display name, I still get the same error message. I don't know if this is the callerid issue or the ip address because my isp only accepts private ip.
the second issue is the inbound calls from the ISP. I get the error message below.
2018/09/21 16:50:05.993846 192.168.130.10:5060 <http://192.168.130.10:5060> -> 192.168.130.250:5060 <http://192.168.130.250:5060>
SIP/2.0 404 No Routes Found
Via: SIP/2.0/UDP 192.168.130.250;branch=z9hG4bK74d8.e07e9c88f5e7f31852b87b835e2ab216.0
Via: SIP/2.0/UDP 192.168.130.250;branch=z9hG4bKsr-Et0g4RYi9qSUNCkc9nPG4T15Qq3f9Rki9TEAQTEAQWkKxXUTwZ05wZgS9nPG4T15Qq3f9Rki9TEAQzNYHZNaLTm2
Cir5cS8T06NRN2Fz0GwnwwrZNwQvjABvjtHnEAQWk*
From: <sip:0216894344 at ims.telco.co.za <mailto:sip%3A0216894344 at ims.telco.co.za> >;tag=00E5946C-5BA5051D000EE506-65F9D700
To: <sip:0216894344 at 192.168.130.10 <mailto:sip%3A0216894344 at 192.168.130.10> >;tag=aprqngfrt-m6u2mn00000k0
CSeq: 10 INVITE
Call-ID: zo743o7x1r1ir132zrwzx9bwy14bxiyo at B.5.102.ims.telco.co.za_b2b-1 <mailto:zo743o7x1r1ir132zrwzx9bwy14bxiyo at B.5.102.ims.telco.co.za_b2b-1>
Calls from ISP are not routed to my subscribers. I created my domains with IP addresses. so I don't know if the problem is the inbound peering rule. I have tried to follow the handbook maybe I missing something, please assist.
Warm regards
Mzi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20180921/45f21133/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5532 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20180921/45f21133/attachment-0001.p7s>
More information about the Spce-user
mailing list