[Spce-user] No ActiveCall on Grafana
Mark van Herpen
mark at cambrium.nl
Tue Oct 8 10:53:16 EDT 2019
Hello,
I'm debugging a bit more. I have one active call, and a query on
influxdb gives me this result:
> select host, kam_dialog_active from kamailio where "node_active" =
'1' and time > now() - 20s group by host;
name: kamailio
tags: host=tran-out01
time host kam_dialog_active
---- ---- -----------------
1570546033000000000 tran-out01 0
1570546043000000000 tran-out01 0
The kam_dialog_active is 0
On another host this is '1'. What sets the kam_dialog_active value?
Grtz,
Mark
Op 01-10-19 om 12:13 schreef Mark van Herpen:
> Hello,
>
> Same issue here on CE mr7.5.1, applied al fixes with 'apt-get upgrade'
> and ngcpcfg apply and a reboot.
>
> I have one active call, also ngcp-status shows 1 active call.
>
> The grafana sip-statistics dashboard shows 0 active calls.
> The 'active calls'-panel (one row lower), shows 'No data points.
>
> From the json-export of the active panel I saw the influx query used:
>
> root at tran-out01:/etc/ngcp-config# influx
> Connected to /run/influxdb/influxdb.sock version 1.6.4
> InfluxDB shell version: 1.6.4
> > use ngcp
> Using database ngcp
> > SELECT SUM(mean) from (SELECT mean(kam_dialog_active) from kamailio
> where "node_active" = '1' AND time > now() - 20s group by host)
> name: kamailio
> time sum
> ---- ---
> 0 0
>
> Also a 'select * from kam_dialog_active' gives no result.
>
> Can I do something more for debugging?
>
> Grtz,
>
> Mark
>
>
>
> Op 23-09-19 om 15:06 schreef Luciano Moreira:
>> Hi Folks,
>>
>> I installed SIPWISE CE 7.4.1. Everything was perfect.
>> Then I upgraded to mr7.5.1. After that, I lost Grafana's Active Calls
>> panel.
>> Applied all hotfixes, but Active calls panel stills empty.
>> I have no clue how to debug this issue. Anyone could help me? Where
>> should I start look in for?
>>
>> +---------------------------------------------- 2019-09-23 09:56:55 -+
>> | NGCP: CE mr7.5.1 nodes setup [ ] |
>> | NGCP: subscribers:21 locations:6 calls:2 |
>> | OS: buster (10.1) 4.19.0-6-amd64 SMP (ext4) |
>> | CPU: 2 = 1 x Virtual CPU 82d9ed4018dd (HT) |
>> | HW: Standard PC (i440FX + PIIX, 1996) by QEMU |
>> | BIOS: rel-1.12.0-0-ga698c8... (04/01/2014) by SeaBIOS |
>> | RAM: 3.9Gi (used 78%/cache 6%) mysqld[39.7%] kamailio[12.7%] |
>> | LA: system load OK: 0.25 0.48 0.51 |
>> | DISK: /dev/sr0 [CDROM] /dev/vda [HDD] |
>> | DISK: space used /[26%] |
>> | DISK: inodes in use /[3%] |
>> | SWAP: used 685824 kB: mysqld[59%] perl-fcgi-pm [N[59%]
>> perl-fcgi[47%] |
>> | MODs: License OFF, DUMMY ON, |
>> +----- ---------------------------------------7.5.1.1+0~mr7.5.1.1---+
>>
>> Luciano Moreira
>> Logic
>>
>
More information about the Spce-user
mailing list