[Spce-user] Sipwise and Fusionpbx

[Reagan Kizanga]

Thanks Leighton,

Made changes to Fusionpbx as below and all is now working Fine.
Thank guys for everything.


Kind Regards

Core2Extreme IT Solution

Director

Reagan Kizanga

Cell : 078 081 7307

Cell : 083 809 2272


Tel  : 010 045 3647

Email: reagan.kizanga at core2extreme.co.za<mailto:reagan.kizanga at core2extreme.co.za>

www.core2extreme.co.za<http://www.core2extreme.co.za/>

[1534765147162_CLEAR]
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager at info at core2extreme.co.za<mailto:info at core2extreme.co.za>



From: Leighton Brennan <leightonbrennan at gmail.com>
Sent: Wednesday, 19 February 2020 10:02 PM
To: Brian Pelletier <brian.pelletier at aloe-me.net>
Cc: Reagan Kizanga <Reagan.Kizanga at core2extreme.co.za>; Spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Sipwise and Fusionpbx

Hey
We have quite a few trunks working with fusionpbx and they work quite well.

We use register mode as we have a separate trunk for each tennant.
The only setting we configure on the gateway are
Username = “sip username”
Password = “sip password”
From Domain = “sip domain of SIPwise”
Proxy = “sip domain of SIPwise”
Realm = “sip domain of SIPwise”
Register = True

*Under advanced setting*
Auth-username = “sip username”
Caller-ID in FROM = True
SIP CID = pid

We then set the caller ID on the user extension to be in e164 format for outbound caller ID for external calls.

Never had to enable anything in particular on SIPwise.

Best Regards
Leighton Brennan


On 19 Feb 2020, at 17:05, Brian Pelletier <brian.pelletier at aloe-me.net<mailto:brian.pelletier at aloe-me.net>> wrote:

I had to play around with tags in Sipwise to make it work. I think I have exact notes on what had to be done. When I get back to a computer I'll try to find them.  If not I can look at the trunk setting I have.


Brian Pelletier

---- On Wed, 19 Feb 2020 11:54:41 -0500 Reagan.Kizanga at core2extreme.co.za<mailto:Reagan.Kizanga at core2extreme.co.za> wrote ----
Hi Brian,

I have caller ID setup on the extension,
Please advise on your work around, I don’t mind any solution that will work


Kind Regards

Core2Extreme IT Solution

Director

Reagan Kizanga

Cell : 078 081 7307

Cell : 083 809 2272


Tel  : 010 045 3647

Email: reagan.kizanga at core2extreme.co.za<mailto:reagan.kizanga at core2extreme.co.za>

www.core2extreme.co.za<http://www.core2extreme.co.za/>

<1.png>
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager at info at core2extreme.co.za<mailto:info at core2extreme.co.za>



From: Brian Pelletier <brian.pelletier at aloe-me.net<mailto:brian.pelletier at aloe-me.net>>
Sent: Wednesday, 19 February 2020 6:51 PM
To: Reagan Kizanga <Reagan.Kizanga at core2extreme.co.za<mailto:Reagan.Kizanga at core2extreme.co.za>>
Cc: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>
Subject: Re: [Spce-user] Sipwise and Fusionpbx

I have this exact setup and had quite a few problems to get caller ID to work correctly. On FusionpbxPBX do you have the caller ID numbers set on the user/extension?

Brian Pelletier

---- On Wed, 19 Feb 2020 11:47:34 -0500 Reagan.Kizanga at core2extreme.co.za<mailto:Reagan.Kizanga at core2extreme.co.za> wrote ----
Good day Everyone,

I wanted to find out if anyone has managed to get Sipwise to work with Fusionpbx.
I have managed to get everything to work except outbound caller ID.

I am using  the subscriber sip trunk created on sipwise as the gateway on Fusionpbx, all is well except that that when I make phone calls
With the extension from fusion calls show as anonymous.

Any advise please.


Kind Regards

Core2Extreme IT Solution

Director

Reagan Kizanga

Cell : 078 081 7307

Cell : 083 809 2272


Tel  : 010 045 3647

Email: reagan.kizanga at core2extreme.co.za<mailto:reagan.kizanga at core2extreme.co.za>

www.core2extreme.co.za<http://www.core2extreme.co.za/>

<1.png>
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager at info at core2extreme.co.za<mailto:info at core2extreme.co.za>



--
Spce-user mailing list
Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>
http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com


--
Spce-user mailing list
Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>
http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20200220/11063a5f/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 11419 bytes
Desc: image001.png
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20200220/11063a5f/attachment-0002.png>