[Spce-user] Change SIP URI

[Daniel Grotti]

Thomas,
you are right, that's ok indeed in the PRO edition...but unfortunately 
this is not available for CE customers.
That's why I didn't mention Header Manipulation.

Cheers,

Daniel Grotti

Head of Customer Support                     Sipwise GmbH
e: dgrotti at sipwise.com                     Europaring F15
t: +43(0)130120332                A-2345 Brunn Am Gebirge
w: www.sipwise.com   FN: 305595f   FG: LG Wiener Neustadt

On 5/28/20 4:43 PM, Thomas Faller wrote:
> Hello Viraj,
> 
> I had the same requirement. I was able to solve this by using the 
> „Header Manipulation“ feature.
> 
> I created a Rule Set which is atteched to the peer. The Rule Set 
> contains a rule to change the the domian part of From User and 
> P-Asserted-Identity.
> 
> Regards
> 
> Thomas
> 
> *Von:* Viraj Balgobind <ideatells at outlook.com>
> *Gesendet:* Donnerstag, 28. Mai 2020 12:02
> *An:* Daniel Grotti <dgrotti at sipwise.com>; spce-user at lists.sipwise.com
> *Betreff:* Re: [Spce-user] Change SIP URI
> 
> Hi Daniel,
> 
> Thanks for your reply and you are absolutely right about it. I will 
> contact them dor a solution.
> 
> Sent from Outlook Mobile <https://aka.ms/blhgte>
> 
> ------------------------------------------------------------------------
> 
> *From:*Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
> *Sent:* Wednesday, May 27, 2020 3:23:24 PM
> *To:* Viraj Balgobind <ideatells at outlook.com 
> <mailto:ideatells at outlook.com>>; spce-user at lists.sipwise.com 
> <mailto:spce-user at lists.sipwise.com> <spce-user at lists.sipwise.com 
> <mailto:spce-user at lists.sipwise.com>>
> *Subject:* Re: [Spce-user] Change SIP URI
> 
> Hi,
> if you really want to stay with this provider, then the only option is
> to change your local SIP domain, and use your IP instead of URL.
> 
> Sorry, but this is a limitation on your peering side, there is no reason
> why we should set IP in From domain.
> 
> Cheers,
> 
> Daniel Grotti
> 
> Head of Customer Support                     Sipwise GmbH
> e: dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>                     
> Europaring F15
> t: +43(0)130120332                A-2345 Brunn Am Gebirge
> w: www.sipwise.com <http://www.sipwise.com>   FN: 305595f   FG: LG 
> Wiener Neustadt
> 
> On 5/27/20 1:18 PM, Viraj Balgobind wrote:
>  > Hi Daniel,
>  >
>  > Thanks for helping me out!
>  > Sorry for the confusion. What I meant was the following:
>  >
>  > I got a NGCP server with the following sip domain: dev.ngcp.eu with 
> IP address of : 65.212.33.69 When I place a outbound call to 4455544666 
> the SIP Peer  the from URI is : <sip:4455544666 at dev.ngcp.eu> But the 
> domain part I not accepted by my SIP peer, because it requires a IP 
> address instead of my sip domain. So the fom URI needs to be: 
> <sip:4455544666 at 65.212.33.69>
>  >
>  > Secondly,
>  >
>  > How can I change the header of NGCP? When I change the setting in the 
> peer it does not work.
>  >
>  > Kind regards,
>  > Viraj
>  >
>  > -----Original Message-----
>  > From: Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
>  > Sent: Wednesday, 27 May 2020 09:09
>  > To: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>  > Subject: Re: [Spce-user] Change SIP URI
>  >
>  > Hi,
>  > did you set the hostname field in your peering server configuration?
>  > Just remove the hostname field "dev.ngcp.eu" and leave only the IP 
> address field.
>  >
>  > Cheers,
>  >
>  > Daniel Grotti
>  >
>  > Head of Customer Support                     Sipwise GmbH
>  > e: dgrotti at sipwise.com 
> <mailto:dgrotti at sipwise.com>                     Europaring F15
>  > t: +43(0)130120332                A-2345 Brunn Am Gebirge
>  > w: www.sipwise.com <http://www.sipwise.com>   FN: 305595f   FG: LG 
> Wiener Neustadt
>  >
>  > On 5/27/20 7:54 AM, Viraj Balgobind wrote:
>  >> Dear,
>  >>
>  >> I would like to change the SIP URI from my peer. My peer is using IP
>  >> authentication and when I send the SIP URI it is in de follwoing format:
>  >>
>  >> <sip:4455544666 at dev.ngcp.eu> and it needs to be sent to the peer in
>  >> the following format: <sip:4455544666 at 65.212.33.69>
>  >>
>  >> How can I change that within the 7.5 release?
>  >>
>  >> Kind regards!
>  >>
>  >
>  > --
>  > Spce-user mailing list
>  > Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>  > http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>  >
> 
>