[Spce-user] Change SIP URI

Daniel Grotti dgrotti at sipwise.com
Wed Jun 10 03:24:44 EDT 2020


Hi Viraj,
Please notice that Header Manipulation is not part of CE version.



Daniel Grotti

Head of Customer Support                     Sipwise GmbH
e: dgrotti at sipwise.com                     Europaring F15
t: +43(0)130120332                A-2345 Brunn Am Gebirge
w: www.sipwise.com   FN: 305595f   FG: LG Wiener Neustadt

On 6/9/20 3:28 PM, Viraj Balgobind wrote:
> Dear Thomas,
> 
> Thanks for your email! Do you have a example of which rule set you created?
> 
> Kind regards,
> 
> Viraj
> 
> *From:*Thomas Faller <t.faller at stiegeler.com>
> *Sent:* Thursday, 28 May 2020 16:44
> *To:* Viraj Balgobind <ideatells at outlook.com>; spce-user at lists.sipwise.com
> *Subject:* AW: [Spce-user] Change SIP URI
> 
> Hello Viraj,
> 
> I had the same requirement. I was able to solve this by using the 
> „Header Manipulation“ feature.
> 
> I created a Rule Set which is atteched to the peer. The Rule Set 
> contains a rule to change the the domian part of From User and 
> P-Asserted-Identity.
> 
> Regards
> 
> Thomas
> 
> *Von:*Viraj Balgobind <ideatells at outlook.com 
> <mailto:ideatells at outlook.com>>
> *Gesendet:* Donnerstag, 28. Mai 2020 12:02
> *An:* Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>; 
> spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> *Betreff:* Re: [Spce-user] Change SIP URI
> 
> Hi Daniel,
> 
> Thanks for your reply and you are absolutely right about it. I will 
> contact them dor a solution.
> 
> Sent from Outlook Mobile <https://aka.ms/blhgte>
> 
> ------------------------------------------------------------------------
> 
> *From:*Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
> *Sent:* Wednesday, May 27, 2020 3:23:24 PM
> *To:* Viraj Balgobind <ideatells at outlook.com 
> <mailto:ideatells at outlook.com>>; spce-user at lists.sipwise.com 
> <mailto:spce-user at lists.sipwise.com> <spce-user at lists.sipwise.com 
> <mailto:spce-user at lists.sipwise.com>>
> *Subject:* Re: [Spce-user] Change SIP URI
> 
> Hi,
> if you really want to stay with this provider, then the only option is
> to change your local SIP domain, and use your IP instead of URL.
> 
> Sorry, but this is a limitation on your peering side, there is no reason
> why we should set IP in From domain.
> 
> Cheers,
> 
> Daniel Grotti
> 
> Head of Customer Support                     Sipwise GmbH
> e: dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>                     
> Europaring F15
> t: +43(0)130120332                A-2345 Brunn Am Gebirge
> w: www.sipwise.com <http://www.sipwise.com>   FN: 305595f   FG: LG 
> Wiener Neustadt
> 
> On 5/27/20 1:18 PM, Viraj Balgobind wrote:
>> Hi Daniel,
>> 
>> Thanks for helping me out!
>> Sorry for the confusion. What I meant was the following:
>> 
>> I got a NGCP server with the following sip domain: dev.ngcp.eu with IP address of : 65.212.33.69 When I place a outbound call to 4455544666 the SIP Peer  the from URI is : <sip:4455544666 at dev.ngcp.eu> But the domain part I not accepted by my SIP 
> peer, because it requires a IP address instead of my sip domain. So the 
> fom URI needs to be: <sip:4455544666 at 65.212.33.69>
>> 
>> Secondly,
>> 
>> How can I change the header of NGCP? When I change the setting in the peer it does not work.
>> 
>> Kind regards,
>> Viraj
>> 
>> -----Original Message-----
>> From: Daniel Grotti <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>>
>> Sent: Wednesday, 27 May 2020 09:09
>> To: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>> Subject: Re: [Spce-user] Change SIP URI
>> 
>> Hi,
>> did you set the hostname field in your peering server configuration?
>> Just remove the hostname field "dev.ngcp.eu" and leave only the IP address field.
>> 
>> Cheers,
>> 
>> Daniel Grotti
>> 
>> Head of Customer Support                     Sipwise GmbH
>> e: dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>                     
> Europaring F15
>> t: +43(0)130120332                A-2345 Brunn Am Gebirge
>> w: www.sipwise.com <http://www.sipwise.com>   FN: 305595f   FG: LG Wiener 
> Neustadt
>> 
>> On 5/27/20 7:54 AM, Viraj Balgobind wrote:
>>> Dear,
>>>
>>> I would like to change the SIP URI from my peer. My peer is using IP
>>> authentication and when I send the SIP URI it is in de follwoing format:
>>>
>>> <sip:4455544666 at dev.ngcp.eu> and it needs to be sent to the peer in
>>> the following format: <sip:4455544666 at 65.212.33.69>
>>>
>>> How can I change that within the 7.5 release?
>>>
>>> Kind regards!
>>>
>> 
>> --
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>> http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>> 
> 
> 




More information about the Spce-user mailing list