[Spce-user] Change SIP URI

[Thomas Faller]

Hello Viraj,

I had the same requirement. I was able to solve this by using the "Header Manipulation" feature.
I created a Rule Set which is atteched to the peer. The Rule Set contains a rule to change the the domian part of From User and P-Asserted-Identity.

Regards
Thomas

Von: Viraj Balgobind <ideatells at outlook.com>
Gesendet: Donnerstag, 28. Mai 2020 12:02
An: Daniel Grotti <dgrotti at sipwise.com>; spce-user at lists.sipwise.com
Betreff: Re: [Spce-user] Change SIP URI

Hi Daniel,

Thanks for your reply and you are absolutely right about it. I will contact them dor a solution.


Sent from Outlook Mobile<https://aka.ms/blhgte>
________________________________
From: Daniel Grotti <dgrotti at sipwise.com<mailto:dgrotti at sipwise.com>>
Sent: Wednesday, May 27, 2020 3:23:24 PM
To: Viraj Balgobind <ideatells at outlook.com<mailto:ideatells at outlook.com>>; spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com> <spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>>
Subject: Re: [Spce-user] Change SIP URI

Hi,
if you really want to stay with this provider, then the only option is
to change your local SIP domain, and use your IP instead of URL.

Sorry, but this is a limitation on your peering side, there is no reason
why we should set IP in From domain.

Cheers,

Daniel Grotti

Head of Customer Support                     Sipwise GmbH
e: dgrotti at sipwise.com<mailto:dgrotti at sipwise.com>                     Europaring F15
t: +43(0)130120332                A-2345 Brunn Am Gebirge
w: www.sipwise.com<http://www.sipwise.com>   FN: 305595f   FG: LG Wiener Neustadt

On 5/27/20 1:18 PM, Viraj Balgobind wrote:
> Hi Daniel,
>
> Thanks for helping me out!
> Sorry for the confusion. What I meant was the following:
>
> I got a NGCP server with the following sip domain: dev.ngcp.eu with IP address of : 65.212.33.69 When I place a outbound call to 4455544666 the SIP Peer  the from URI is : <sip:4455544666 at dev.ngcp.eu> But the domain part I not accepted by my SIP peer, because it requires a IP address instead of my sip domain. So the fom URI needs to be: <sip:4455544666 at 65.212.33.69>
>
> Secondly,
>
> How can I change the header of NGCP? When I change the setting in the peer it does not work.
>
> Kind regards,
> Viraj
>
> -----Original Message-----
> From: Daniel Grotti <dgrotti at sipwise.com<mailto:dgrotti at sipwise.com>>
> Sent: Wednesday, 27 May 2020 09:09
> To: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>
> Subject: Re: [Spce-user] Change SIP URI
>
> Hi,
> did you set the hostname field in your peering server configuration?
> Just remove the hostname field "dev.ngcp.eu" and leave only the IP address field.
>
> Cheers,
>
> Daniel Grotti
>
> Head of Customer Support                     Sipwise GmbH
> e: dgrotti at sipwise.com<mailto:dgrotti at sipwise.com>                     Europaring F15
> t: +43(0)130120332                A-2345 Brunn Am Gebirge
> w: www.sipwise.com<http://www.sipwise.com>   FN: 305595f   FG: LG Wiener Neustadt
>
> On 5/27/20 7:54 AM, Viraj Balgobind wrote:
>> Dear,
>>
>> I would like to change the SIP URI from my peer. My peer is using IP
>> authentication and when I send the SIP URI it is in de follwoing format:
>>
>> <sip:4455544666 at dev.ngcp.eu> and it needs to be sent to the peer in
>> the following format: <sip:4455544666 at 65.212.33.69>
>>
>> How can I change that within the 7.5 release?
>>
>> Kind regards!
>>
>
> --
> Spce-user mailing list
> Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>
> http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20200528/c3415423/attachment-0002.html>