[Spce-user] Register a PBX to SipWise CE

Tue Sep 29 05:08:05 EDT 2020

Thank you for your time but maybe what i searching to archive is not so 
usual with SPCE.

I have a SIP trunk where there i receive specific calls and the calls 
need to be answered by a phone.

the SIP trunk has registration credentials in order to work. SIP trunk 
needs to register in SPCE than i can route the received calls to the 
subscribers.

the link provided is for outbound calls and registering outbound peers. 
in need for inbound calls

On 9/29/2020 12:41 AM, Matthias Hohl wrote:
> Again: what setup do you want?
>
> Create a subscriber on SPCE and connect your pbx via this subscriber 
> and phones on the pbx.
> Then create a peering on SPCE and connect them to a Carrier SIP Trunk 
> provider.
>
> Thats normal setup.
>
> If you want a PBX as your carrier, use IP Athentification or enable 
> user/pass authentification for peerings.
>
> Check handbook for details.
>
> => create peering
> => create subscriber
>
> All in all, read the handbook carefully
>
>
>> Am 28.09.2020 um 21:28 schrieb Neofone Info <info at neofone.al>:
>>
>> 
>>
>> hello,
>>
>>
>> I have a Sip Trunk that is with registration. So i need it to receive 
>> calls. Why this seem so strange you can do it in Asterisk in trunks.
>>
>> Thanks
>>
>>
>> On 9/28/2020 8:02 PM, Matthias Hohl wrote:
>>>
>>> Hello,
>>>
>>> no it is definitely no PBX at the end of the day.
>>>
>>> It is a SIP server solution for providing a peering connection to 
>>> several hundreds or thousands of subscriber.
>>>
>>> I really don’t get the point for what reason you want to connect a 
>>> SPCE to a PBX.. what is your plan?
>>>
>>> Normally it goes this way: PTSN/SIP-NNI => SPCE => PBX
>>>
>>> For sure you can, but you have to enable user/pass authenficiation 
>>> for peerings.
>>>
>>> But anyway, this is not common… normally you do Peering connections 
>>> via ip authorization.
>>>
>>> But like I told before, I really don’t get the point, what you want 
>>> to do with that.
>>>
>>> *Von:*Neofone Info <info at neofone.al>
>>> *Gesendet:* Montag, 28. September 2020 19:25
>>> *An:* Matthias Hohl <matthias.hohl at telematica.at>; 'Walter Klomp' 
>>> <walter at myrepublic.net>
>>> *Cc:* spce-user at lists.sipwise.com
>>> *Betreff:* Re: AW: [Spce-user] Register a PBX to SipWise CE
>>>
>>> I have information that can be done in CE.
>>>
>>> CE is not a PBX at the end of the day? why i can register a CE to a 
>>> PBX and can't do the same with a PBX register in CE? i have specific 
>>> username and password of PBX that can't be changed.
>>>
>>> with register i mean the registration process of a device. in a sip 
>>> client you register a subscriber i need this also in CE.
>>>
>>> peering does not have option to register for incoming calls or at 
>>> least i didn't found it.
>>>
>>> Thanks
>>>
>>> On 9/28/2020 5:32 PM, Matthias Hohl wrote:
>>>
>>>     Hello,
>>>
>>>     i think you misunderstand the workflow of the SPCE.
>>>
>>>     You can’t register the SPCE as a subscriber on the PBX.
>>>
>>>     You need to register the PBX as a subscriber on the SPCE!
>>>
>>>     So you create a new subscriber on the SPCE and connect your PBX
>>>     via the SPCE IP and the created Username and Password of the
>>>     subscriber.
>>>
>>>     If you want to connect your PBX as a peering to the SPCE, really
>>>     don’t know for what reason, than you can create a SPCE Peering
>>>     and connect the SPCE to the PBX, but I really don’t know why you
>>>     want to do this.
>>>
>>>     *Von:*Neofone Info <info at neofone.al> <mailto:info at neofone.al>
>>>     *Gesendet:* Montag, 28. September 2020 17:09
>>>     *An:* Walter Klomp <walter at myrepublic.net>
>>>     <mailto:walter at myrepublic.net>
>>>     *Cc:* spce-user at lists.sipwise.com
>>>     <mailto:spce-user at lists.sipwise.com>
>>>     *Betreff:* Re: [Spce-user] Register a PBX to SipWise CE
>>>
>>>     so you are saying that in a subscriber where i need to create
>>>     username and password instead of this i enter username and
>>>     password of the other PBX that i want to register in sipwise?
>>>
>>>     i have the credential of another PBX and want to register in
>>>     sipwise.
>>>
>>>     thanks
>>>
>>>     On 9/28/2020 4:25 PM, Walter Klomp wrote:
>>>
>>>         Just create a subscriber and use the username and password
>>>         to register your PBX to it.
>>>
>>>         On Mon, 28 Sep 2020 at 21:00, Neofone Info <info at neofone.al
>>>         <mailto:info at neofone.al>> wrote:
>>>
>>>             I am checking to configure a PBX in SipWice CE. Register
>>>             it in sipwise
>>>
>>>
>>>
>>>             There is not information how i can register a PBX with
>>>             username password
>>>
>>>             and host in sipwise CE.
>>>
>>>
>>>
>>>             can anyone send a link where this is covered or provide
>>>             information how
>>>
>>>             i can register a PBX in sipwise to receive calls?
>>>
>>>
>>>
>>>             thanks
>>>
>>>
>>>
>>>
>>>
>>>             -- 
>>>
>>>             Spce-user mailing list
>>>
>>>             Spce-user at lists.sipwise.com
>>>             <mailto:Spce-user at lists.sipwise.com>
>>>
>>>             https://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>>>
>>>         -- 
>>>
>>>         Warmest Regards,
>>>
>>>
>>>         <https://myrepublic.com.sg/>
>>>
>>>         	
>>>
>>>         *Walter Klomp*
>>>
>>>         Head of Voice & Systems
>>>
>>>         MyRepublic Limited
>>>
>>>         T: +65 6816 1120
>>>
>>>         F: +65 6717 2031
>>>
>>>         MyRepublic Limited
>>>
>>>         11 Lorong 3 Toa Payoh Block B Jackson Square
>>>
>>>         #04-11/15 Singapore 319579
>>>
>>>
>>>         myrepublic.com.sg <https://myrepublic.com.sg/>
>>>
>>>         Follow us on: Twitter <https://twitter.com/myrepublic> |
>>>         Facebook <https://facebook.com/myrepublicsg> | LinkedIn
>>>         <https://www.linkedin.com/company/myrepublic>
>>>
>>>
>>>
>>>         /The contents of this email and any attachments are
>>>         confidential and may also be privileged. You must not
>>>         disseminate the contents of this email and any attachments
>>>         without permission of the sender. If you have received this
>>>         email by mistake, please delete all copies and inform the
>>>         sender immediately. You may refer to our company's Privacy
>>>         Policy here
>>>         <https://myrepublic.net/sg/legal/terms-of-use-policies/privacy-policy/>./
>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20200929/865adca6/attachment-0001.html>