[Spce-user] SIPWISE Configuration Help

[James Kindele]

Do you have rtp internally? I.e. fr extension2extension? How about
extension to system (i.dialing the voicemail system?).

Please share the call full pcap as opposed to just rtp txt.

Also a great troubleshooting tool is sngrep

On Fri., Feb. 26, 2021, 2:35 a.m. Muazu Musa Muhd, <muazumusamuhd at gmail.com>
wrote:

> Hello, Please I really need your help setting up SIPWISE on AWS EC2 for my
> small team, I tried using different versions and followed the respective
> procedures stated in the Handbook all to no avail, I really ran out of
> options, the problem I am facing is that everything would work but there
> will be no RTP packets exchanged as it was pointed out to me in this issue,
> I am new to this platform but I am trying my best to learn, I really hope
> someone can point me in the right direction to set it up.
>
> I use eu-west 1region
> I used almost all images you provided on the region starting
> from ami-8bef6cfc
> to this ami-0a595d7ac0266d740
> I set up all ports correctly
> TCP port 22 (SSH)
> – TCP port 443 (HTTPS/CSC)
> – TCP port 1443 (Admin Panel)
> – TCP port 5060 (SIP/TCP)
> – UDP port 5060 (SIP/UDP)
> – TCP port 5061 (SIP/TLS)
> – TCP port 5222 (SIP)
> – TCP port 5269 (SIP)
> – UDP port 30000:44999 (RTP)
>
> I launch my instance and SSH in to it
> I advertise my public IP with
> ngcp-network --set-interface=eth0 --advertised-ip=54.78.110.45
> I apply the changes with
> ngcpcfg apply ’add advertised-ip on interface eth0’
>
>
> Then I add network configuration like
>
>
> ngcp-network --set-interface=eth0 --ip=auto --netmask=auto --hwaddr=auto
> ngcp-network --move-from=lo --move-to=eth0 --type=web_ext --type=sip_ext
> --type=rtp_ext --type=ssh_ext --type=web_int
>
> my network.yml is like
>
> ---
> hosts:
>   self:
>     dbnode: '1'
>     ens5:
>       advertised_ip:
>       - 54.78.110.45
>       dns_nameservers:
>       - 10.0.0.2
>       gateway: 10.0.0.1
>       hwaddr: 02:9c:1d:a2:a2:6d
>       ip: 172.31.3.101
>       netmask: 255.255.240.0
>       type:
>       - web_ext
>       - sip_ext
>       - rtp_ext
>       - web_int
>       - ssh_ext
>     interfaces:
>     - lo
>     - ens5
>     lo:
>       cluster_sets:
>       - default
>       ip: 127.0.0.1
>       netmask: 255.255.255.0
>       shared_ip: []
>       shared_v6ip: []
>       type:
>       - sip_int
>       - ha_int
>       - aux_ext
>       - ssh_ext
>       - api_int
>       - rtp_int
>       - stor_int
>       v6ip: ::1
>       v6netmask: 128
>     role:
>     - proxy
>     - lb
>     - mgmt
>     - rtp
>     - db
>     - storage
>     status: online
>     swraiddevices: []
>     sysdescr: ''
>     syslocation: ''
>     sysname: ''
>
>
> And i apply the changes with
>
> ngcpcfg apply ’change network configuration’
>
>
> So I do everything like the Handbook suggested but everything I do is
> turning the same result.
>
> I have attached my RTP log
>
> I really wish you could help me. Thank you so much.
>
> --
> Muazu Musa Muhammad
>
> Vannia Technologies LLC.
> Twiiter: @MuazuMusaMuhd
> LinkedIn: Muazu Musa Muhammad
>
> --
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/mailman/listinfo/spce-user_lists.sipwise.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20210323/a90b623a/attachment.html>