[Spce-user] [EXTERNAL] RE: incoming Session fails using ngcp CE mr12.4.1 and SIP.js

Tue Oct 8 12:19:13 EDT 2024

As you can see the expected partition mapping for the upgrade is not
present in you deployment.
The upgrade scripts expects something like this.
~# df -h
Filesystem                 Size  Used Avail Use% Mounted on
udev                        32G     0   32G   0% /dev
tmpfs                      6.3G  1.4M  6.3G   1% /run
/dev/mapper/ngcp-fallback  9.8G  5.3G  4.0G  58% /
tmpfs                       32G   33M   32G   1% /dev/shm
tmpfs                      5.0M     0  5.0M   0% /run/lock
/dev/mapper/ngcp-root      9.8G  4.7G  4.6G  51% /ngcp-fallback
/dev/sdb2                  486M  176K  485M   1% /boot/efi
/dev/mapper/ngcp-data      377G   28G  330G   8% /ngcp-data
tmpfs                      6.3G     0  6.3G   0% /run/user/0
With partitions
/dev/mapper/ngcp-root
/dev/mapper/ngcp-fallback
I guess the only options is to re-install.
Dario

On Tue, Oct 8, 2024 at 2:11 PM Pa Ka <pa.ka12 at outlook.com> wrote:

> This is the result
>
>
> root at sips:/home/sysadmin# df -h
>
>
>
> Filesystem      Size  Used Avail Use% Mounted on
>
> udev            1.9G     0  1.9G   0% /dev
>
> tmpfs           388M  912K  387M   1% /run
>
> /dev/sdb1        30G  5.9G   22G  21% /
>
> tmpfs           1.9G  192K  1.9G   1% /dev/shm
>
> tmpfs           5.0M     0  5.0M   0% /run/lock
>
> /dev/sdb15      124M   12M  113M  10% /boot/efi
>
> /dev/sda1       7.8G   24K  7.4G   1% /mnt
>
> tmpfs           388M  4.0K  388M   1% /run/user/1000
>
>
>
> *From:* Dario Busso <dbusso at sipwise.com>
> *Sent:* Tuesday, October 8, 2024 2:59 AM
> *To:* Pa Ka <pa.ka12 at outlook.com>
> *Cc:* spce-user at lists.sipwise.com
> *Subject:* Re: [EXTERNAL] RE: incoming Session fails using ngcp CE
> mr12.4.1 and SIP.js
>
>
>
> Execute this commands and paste the output, please.
>
> mount
>
> df -h
>
>
>
> Dario
>
>
>
> On Mon, Oct 7, 2024 at 10:51 PM Pa Ka <pa.ka12 at outlook.com> wrote:
>
> I was trying to upgrade from mr12.4.1 to mr 12.5.1 from azure vm, got this
> error when reach to this step ngcp-upgrade-pre-checks mr12.5.1 . kindly
> guide ! thank you
>
>
> => Running
> /tmp/ngcp-upgrade-pre-checks_5uE1SiWV/upgrade-mr12.4-to-mr12.5.1-checks-only
>
>
> ================================================================================
>
> Sipwise C5 CE detected...
>
> 2024-10-07 16:47:27: [01/23] Running:
> /usr/share/ngcp-upgrade/steps/mr4.2/check_mandatory_variables
>
> Time taken to run step mr4.2/check_mandatory_variables: 0.01s
>
>
>
> 2024-10-07 16:47:27: [02/23] Running:
> /usr/share/ngcp-upgrade/steps/mr5.5/report_check_start
>
> Checking for upgrade from 'mr12.4.1' to 'mr12.5.1' started on Mon Oct  7
> 16:47:27 EDT 2024
>
> Time taken to run step mr5.5/report_check_start: 0.02s
>
>
>
> 2024-10-07 16:47:27: [03/23] Running:
> /usr/share/ngcp-upgrade/steps/mr9.5/check_dedicated_fallback
>
> ERROR: Fallback partition '/dev/mapper/ngcp-root' is not a block device
>
> Time taken to run step mr9.5/check_dedicated_fallback: 0.01s
>
>
>
> ERROR: the step 'mr9.5/check_dedicated_fallback' failed, upgrade check
> aborted!
>
>
>
> *From:* Pa Ka <pa.ka12 at outlook.com>
> *Sent:* Friday, October 4, 2024 8:51 PM
> *To:* spce-user at lists.sipwise.com
> *Subject:* Re: incoming Session fails using ngcp CE mr12.4.1 and SIP.js
>
>
>
> Please ignore the previous email. I managed to resolve the issue it was a
> SIP.js error. Thanks
> ------------------------------
>
> *From:* Pa Ka <pa.ka12 at outlook.com>
> *Sent:* Friday, October 4, 2024 5:01:08 AM
> *To:* spce-user at lists.sipwise.com <spce-user at lists.sipwise.com>
> *Subject:* incoming Session fails using ngcp CE mr12.4.1 and SIP.js
>
>
>
> Hey Please help me to understand this. incoming session on my SIP.js
> application are failing.
>
>
>
> *But, outgoingcall are functioning, I can initiate call to the PSTN.*
>
>
>
> *Second, Incoming session works perfectly when using Zoiper softphone
> application installed on Windows ( Zoiper and SIP.js are using the same
> configuration from ngcp c5 switch which make me think it is not ngcp c5
> issue, but prefer to ask here!!!)*
>
>
>
> *No 404 fallback is enabled on the portal to the specific address used to
> log into both phone.*
>
>
>
> *This IP 172.110.70.15 , is for a local pc*
>
>
>
>
>
> I’d would like to know if it is SIP.js codes or Sipwise (ngcp CE mr12.4.1
> ) configuration that cause the error.  Below are the sip proxy from
> Kamailio-proxy.log .
>
>
>
>
>
> When call from PSTN arrives, the script rewrite called party to remove the
> leading 1
>
>
>
> NOTICE: ROUTE_APPLY_REWRITE_RULE <script>: Rewriting called party
> '«199999101»' to '«99999101»' - R=«sip:19999101 at 172.110.70.155:57432;transport=tcp;rinstance=6492442»
> ID=«1B6D3B76 at 208.72.120.66» UA='<null>'
>
>
>
> Oct  4 04:31:39.478180 sips proxy[1641]: NOTICE: BRANCH_ROUTE_SBC
> <script>: Setting P-Called-Party-ID 'sip:«99999101»@«sip.sipdomain.com;user=phone»'
> - R=«sip:99999101 at 172.110.70.155:57432;transport=tcp;rinstance=6492442;user=phone»
> ID=«1B6D3B76 at pstnIP.66» UA='<null>'
>
>
>
>
>
> This is the first request to the B2B
>
> New request on proxy for the B LEG of the call - M=INVITE
> R=«sip:99999101 at 172.110.70.155:57432;transport=tcp;rinstance=6492442;user=phone»
> F=«sip:calllerNumber64 at sip.sipdomain.com;user=phone»
> T=«sip:99999101 at sip.sipdomain..com;user=phone» IP=«<null>»:«<null>»
> («127.0.0.1»:«5080») ID=«1B6D3B76 at pstnIP_b2b-1» UA='<null>'
> DESTIP=«127.0.0.1»:«6052»
>
>
>
> Oct  4 04:31:39.539462 sips proxy[1650]: NOTICE: REPLY_ROUTE_NAT_CONTINUE
> <script>: Sending reply S=404 M=INVITE fs='«127.0.0.1»:«6052»'
> du='«127.0.0.1»:«6050»' - ID=«1B6D3B76 at pstnIP» UA='Vogat/1.0'
>
>
>
> After B2B, it fails with this error
>
>
>
> Oct  4 04:31:39.539496 sips proxy[1650]: NOTICE: FAILURE_ROUTE_LOCAL
> <script>: Failure route for local call, code='404' -
> R=«sip:usernamesubcriber999 at 172.110.70.155:57432;transport=tcp;rinstance=6492442»
> ID=«1B6D3B76 at pstnIP» UA='<null>'
>
> Oct  4 04:31:39.540023 sips proxy[1650]: NOTICE: FAILURE_ROUTE_LOCAL
> <script>: Fallback from E164 to user DISABLED due to 'no_404_fallback' set
> - R=«sip:usernamesubscriber999 at 172.110.70.155:57432;transport=tcp;rinstance=6492442»
> ID=«1B6D3B76 at pstnIP» UA='<null>'
>
> thank you
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20241008/8f9ee483/attachment.htm>