[Spce-user] Sipwise C5 CE mr 7.5.10 TLS and SRTP configuration issue

[Jon Bonilla (Manwe)]

El Thu, 14 Aug 2025 11:43:12 +0200
Mugen lol <mug3nxz at gmail.com> escribió:

> Hello,
> 
> I’m currently configuring TLS on Sipwise CE 7.5.10 (I’m aware this is a
> slightly older version) and I’m encountering some issues. The goal is to
> enable both inbound and outbound calls using TLS and SRTP.
> 
> I have already configured and enabled the TLS section in the config.yml
> file, along with valid certificates successfully loaded. In fact, on one
> endpoint, once I added the CA certificates, I was able to register with
> Sipwise over TLS without any problems.
> 
> On the other hand, I have a carrier that supports these protocols. However,
> when I try to place a call from this endpoint, I see that the INVITEs are
> correctly arriving on port 5061. But when Sipwise processes the call, SEMS
> (port 5080) attempts to internally forward it to the lb over port 5060. I
> believe this might not be correct, although I could be mistaken. As a
> result, the call never reaches the carrier and remains stuck in Kamailio.
> 

Check the kamailio-lb log. Sems using 5060 is ok because internally
udp is used and tls is only between kamailio-lb and the external endpoint.



-- 
PekePBX, the multitenant PBX solution
https://pekepbx.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: Firma digital OpenPGP
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20250814/f19d12dc/attachment.sig>