[Spce-user] SOLVED: [WAS: RE: mr13.5.1 Bare Metal Installation woes]

[Newbie]

Hi All,

The solution (provided by Mika) was:

| Hi,
|
| Right, but what happens if you run:
|
|   /boot/isolinux/chain.c32 hd0
|
| or:
|
|   /boot/isolinux/chain.c32 hd1
|

STEPS

After apparently successful install, if on the console you get:

No boot device has been detected, please press any key to reboot!

1.  With the installer USB drive still inserted, reboot
2.  Press escape in the GRML Sipwise green installer screen
3.  Enter the following to the "boot" prompt

boot: chain.c32 hd1

It should then boot and bring you to the spce login prompt.

~Newbie