[Spce-user] [EXTERNAL] RE: Spce-user] mr14.0.1 [object Object] Error: peering/2/details/outboundrules/create

[Jose Antonio Su Ng]

Hi,

> I wonder how it could get that way on a barely configured installation...
I don’t have details about when this mr14.0.1 CE system was deployed or 
which packages are currently installed. It’s possible that this bug 
existed when the system was deployed and may have been resolved in a 
later package update.
> Given no resolution, is it recommended to click factory reset?
To provide further support, I recommend sharing the admin-ui/panel 
package version, collecting the relevant logs, and checking the browser 
console when the error occurs. Without more detailed information, it’s 
difficult for us to give specific guidance.

Best regards,

On 2/10/26 13:44, SPCE Newbie wrote:
> Good afternoon and thank you for support.
>
> I wonder how it could get that way on a barely configured installation...
>
> Given no resolution, is it recommended to click factory reset?
>
> Again, thank you.
>
>
> ------ Original Message -------
> Date: Tue, 10 Feb 2026 13:33:42 +0100
> From: Jose Antonio Su Ng<jsung at sipwise.com>
> To: SPCE Newbie<spce-user at tel.co.uk>
> Cc: Spce-user<spce-user at lists.sipwise.com>
> Subject: Re: [EXTERNAL] RE: Spce-user] mr14.0.1 [object Object] Error: peering/2/details/outboundrules/create
>
>
> Hi,
>
> I've sent a reply on 3/2 at 16:41 CET. In any case, here is the message
> once again:
>
> Hi,
>
> Please have a look at this link to the handbook:
> https://www.sipwise.com/doc/mr14.0.1/spce/ce/mr14.0.1/upgrade/upgrade.html#_applying_the_latest_hotfixes
>
> I've tested it on my side and I cannot  reproduce your issue. It works
> fine on my side.
>
> Best regards,
>
> On 2/10/26 13:22, SPCE Newbie wrote:
>> Good afternoon and thank you for support.
>>
>> I should be grateful for an update.
>>
>> Again, thank you.
>>
>> ----- Original Message -----
>> Date: Tue, 3 Feb 2026 15:31:31 +0000
>> From: SPCE Newbie<spce-user at tel.co.uk>
>> To: Jose Antonio Su Ng<jsung at sipwise.com>
>> Cc: Spce-user<spce-user at lists.sipwise.com>
>> Subject: RE: [Spce-user] mr14.0.1 [object Object] Error:
>> peering/2/details/outboundrules/create
>>
>>
>> Good afternoon and thank you for support.
>>
>> My mistake for reusing a subject line.  Environment is mr14.0.1.
>>
>> When you say updated to latest available, mr14.0.1 is mr14.0.1 isn't
>> it?
>>
>> The reported Chromium-based attempt had been done on a freshly
>> launched incognito browser, but tried just now from another desk with
>> same result.
>>
>> Again, thank you.
>>
>> ----- Original Message -----
>> Date: Tue, 3 Feb 2026 15:46:17 +0100
>> From: Jose Antonio Su Ng<jsung at sipwise.com>
>> To: SPCE Newbie<spce-user at tel.co.uk>,
>> Spce-user<spce-user at lists.sipwise.com> Subject: Re: [EXTERNAL]
>> [Spce-user] mr13.5.1 [Object Object] Error:
>> peering/2/details/outboundrules/create
>>
>> Hi,
>>
>> I see you are running mr14.0.1 instead of mr13.5.1, have you updated
>> all the packages to the latest available?
>>
>> If already on latest packages, can you try clearing your browser's
>> cache and try again?
>>
>> Best regards,
>> Jose Su
>> On 1/30/26 15:30, SPCE Newbie wrote:
>>   
>>> Hi, following the procedure at Figure 13 S. 5.6.2 gives [Object
>>> Object] error on both Mozila and Chromium-based browsers.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20260211/17a5d569/attachment.htm>