[Spce-user] Authentication

John Murray john.murray at skyracktelecom.com
Mon Jul 9 14:21:39 EDT 2012


Jon hi,

This is great and adding the host as trusted works.

How does the SPCE match the incoming INVITE to a local user if they have not registered?
For outbound I set a permanent contact but for inbound INVITEs which fields match which subscriber information to identify a subscriber as local.

Regards

John

-----Original Message-----
From: spce-user-bounces at lists.sipwise.com [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Jon Bonilla (Manwe)
Sent: 09 July 2012 18:01
To: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Authentication

El Mon, 9 Jul 2012 17:43:36 +0100
"John Murray" <john.murray at skyracktelecom.com> escribió:

> Hello,
> 
>  
> 
> I have mobile MVNO service which I want to connect the mobile handsets 
> via SIP to the SPCE as endpoints to give voicemail, call forwarding, 
> etc services to.
> 
> All calls made by the Handset are routed to me via SIP and I can call 
> the handset via SIP.
> 
> As I want to give each user their own settings and voice mailbox etc. 
> I set each user as a subscriber with a fixed contact of the ip address 
> of the MVNO.
> 
>  
> 
> This works however the MVNO does not REGISTER and when an INVITE call 
> is received from the MVNO the SPCE sees this as a user with endpoint 
> and wants to authenticate but the MVNO cannot do this.
> 
>  
> 
> Is there a way to authenticate endpoints on ip address or do I have to 
> disable authentication for the whole system?
> 
>  


Hi John

The permanent location is for endpoints that can't register but they still need to authenticate.


For clients that won't authenticate, we need to set "Trusted-Sources". This has already been implemented in trunk and will be present in 2.6 release.


Meanwhile you can either disable authentication, or customize your installation by playing with kamailio.trusted table, or wait for 2.6,  or you could buy a 2.6trunk based PRO system which would receive regular updates until we release the stable version.  



cheers,

Jon

_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user





More information about the Spce-user mailing list