[Spce-user] session timers?

[Skyler]

Thanks Lorenzo, I will give that a try.

Skyler

On Sun, May 27, 2012 at 2:12 AM, Lorenzo Mangani
<lorenzo.mangani at gmail.com>wrote:

> Hi Skyler,
>
> The issue appears to be with your calltimer_max value being set to 120
> seconds - this explains calls being terminated just as you described. Try
> adjusting the following (any value of preference is seconds) and apply
> changes:
>
>     calltimer_enable: 'yes'
>     calltimer_max: 7200
>
> If you want to have session re-invite/updates (to detect other UA drops
> before calltimer_max gets hit, etc) you also might want to re-enable the
> session timers alongside the above.
>
>
> Best,
>
> Lorenzo
>
>
> On Sun, May 27, 2012 at 3:24 AM, Skyler <skchopperguy at gmail.com> wrote:
>
>> Hi lorenzo,
>>
>>  Thanks for the quick reply. so my sems section from config.yml is below.
>> I need to allow at least 1.5 hours un-interrupted talk time but also need
>> to limit the RTP in case the call is interrupted on either end resulting in
>> a dead call. What settings do you recommend?
>>
>> sems:
>>   bindport: 5080
>>   conference:
>>     enable: 'yes'
>>     max_participants: 10
>>   highport: 50000
>>   lowport: 40001
>>   sbc:
>>     calltimer_enable: 'yes'
>>     calltimer_max: 120
>>     session_timer:
>>       enable: 'no'
>>       max_timer: 120
>>       min_timer: 90
>>       session_expires: 300
>>
>>
>> Thanks,
>> S.
>>
>> On Sat, May 26, 2012 at 4:11 PM, Lorenzo Mangani <
>> lorenzo.mangani at gmail.com> wrote:
>>
>>> Hi Skyler,
>>>
>>> The SEMS call session timers, as well as other timers you might want to
>>> check as well are all defined in* '/etc/ngcp-config/config.yml' - *
>>>
>>> Best,
>>>
>>> Lorenzo
>>>
>>>
>>> On Sun, May 27, 2012 at 12:52 AM, Skyler <skchopperguy at gmail.com> wrote:
>>>
>>>> Hi,
>>>>
>>>>  I'm experiencing dropped calls (BYE) from 127.0.01:5080 (SEMS) at
>>>> about 2-3 mins talk time. I know there is a setting for timers somewhere
>>>> but I forget where to look for it in SEMS configs as there are a few more
>>>> tt2's there since spce 2.1
>>>>
>>>>  How do I control call session timers now in 2.4?
>>>>
>>>> --Skyler
>>>>
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> http://lists.sipwise.com/listinfo/spce-user
>>>>
>>>>
>>>
>>>
>>> --
>>>
>>>
>>> Lorenzo Mangani
>>> QXIP - Network Engineering
>>> http://about.me/lmangani
>>>
>>> MOBILE: +31-(0)646032730
>>> INUM: +883-51000-9135005
>>>
>>>
>>
>
>
> --
>
>
> Lorenzo Mangani
> QXIP - Network Engineering
> http://about.me/lmangani
>
> MOBILE: +31-(0)646032730
> INUM: +883-51000-9135005
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20120531/c7201099/attachment-0001.html>