[Spce-user] connect pbx with sipwise

[Joan Cifre (ibred)]

Hello Andreas,
ok I see it's easy to do. But using this way, what does it happens with 
the Call ID, if the PBX phones have each one its own ID? For inside 
calls, I could use Alias numbers, isn't it? But for outside calls, how 
can I use different Call ID? Can I use allowed_clis parameter for that 
purpose?
And another question, is the unmber of incoming or outgoing calls 
limited, or can it be limited?
Thanks for your valuous support,
Joan


El 08/10/2012 15:25, Andreas Granig escribió:
> Hello Joan,
>
> On 10/08/2012 01:15 PM, Joan Cifre (ibred) wrote:
>> which should be the best way to connect a IP-PBX using a SIP trunk (like
>> a small office PBX) with Sipwise? Calls should come from PBX and should
>> be routed through another trunk (provider). Also should enter from a
>> trunk (provider) and be rerouted to the PBX trunk.
> Just use a normal subscriber like with any other client you're connecting.
>
> If the IP-PBX is uncapable of registering with the NGCP, you can
> manually add a contact in the subscriber master data. If the IP-PBX even
> can't authenticate, then since 2.6 you can add trusted source settings
> in the Preference section.
>
> Andreas
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20121008/61574048/attachment-0001.html>