[Spce-user] FW: retries of INVITES for session timers
Matthew Ogden
matthew at tenacit.net
Wed Apr 3 13:10:47 EDT 2013
HI Andrew,
(I wasn’t sure if I would get time to convert this And catch Andrew), but
here is the ongoing of this thread – converted to private info)
Sorry for coming back to you so long apart, I dont want to include the list
on this yet.
Am I correct in understanding here (Asterisk box iniated this call from
<ClientPublicIP>) that at 14:28, the call was routed using peer
<SipPeerIP?>:
But I really struggle to understand which side has initiated the BYE. I
know a call goes - device - LB - Proxy - B2BUA - Proxy - LB - Peer
I once again suspect the issue is this:
Apr 3 14:28:03 spce /usr/sbin/kamailio[20180]: INFO: <script>: NAT-Reply -
S=100 - Trying F=sip:031<called#>@<sipDomain:5060 T=sip:WS001A001@<SipDomain>
IP=127.0.0.1:5080 (127.0.0.1:5060) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Does this mean that the device at ClientPublicIP, never sent the 200 OK?
There should have been a S-200 just after that. To me it appears that the
problem must be that if a 100 Trying is received, no subsequent RE-INVITES
will occur from SPCE (Assuming SEMS is resposinble for this?)
I have no idea how to look up if thats normal behaviour for SEMS, but
perhaps you can tell me? Also can you confirm it was indeed the device,
that was at fault from the log ?
Load balancer
Apr 3 14:28:03 spce /usr/sbin/kamailio[12350]: INFO: <script>: New request
- M=INVITE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[12350]: INFO: <script>: Mask local
B2BUA contact - M=INVITE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[12350]: INFO: <script>: New request
- M=INVITE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[12350]: INFO: <script>: Perform
loose-routing, du='<null>' - M=INVITE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[12350]: INFO: <script>: Relaying
request, du='<null>', fs='udp:<SPCE_PublicIP>:5060' - M=INVITE
R=sip:WS001A001@<ClientPublicIP>:5060 F=sip:031<called#>@<sipDomain>:5060
T=sip:WS001A001@<sipDomain>
IP=udp:127.0.0.1:5062ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:28:08 spce /usr/sbin/kamailio[12348]: INFO: <script>: New request
- M=UPDATE R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:28:08 spce /usr/sbin/kamailio[12348]: INFO: <script>: Mask local
B2BUA contact - M=UPDATE R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:28:08 spce /usr/sbin/kamailio[12348]: INFO: <script>: Perform
loose-routing, du='<null>' - M=UPDATE
R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:28:08 spce /usr/sbin/kamailio[12348]: INFO: <script>: Relaying
request, du='<null>', fs='udp:<SPCE_PublicIP>:5060' - M=UPDATE
R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:28:08 spce /usr/sbin/kamailio[12340]: INFO: <script>: Reply from
Outbound - S=200 - OK F=sip:2721<CalleR#>@<sipDomain>
T=sip:031<called#>@<sipDomain>:5060 IP=udp:<SIPPeerIP>:5060
ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:28:08 spce /usr/sbin/kamailio[12340]: INFO: <script>: Sending
reply, fs='udp:127.0.0.1:5060' - S=200 - OK F=sip:2721<CalleR#>@<sipDomain>
T=sip:031<called#>@<sipDomain>:5060 IP=udp:<SIPPeerIP>:5060
ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:30:33 spce /usr/sbin/kamailio[12348]: INFO: <script>: New request
- M=BYE R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:30:33 spce /usr/sbin/kamailio[12348]: INFO: <script>: Perform
loose-routing, du='<null>' - M=BYE
R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:30:33 spce /usr/sbin/kamailio[12348]: INFO: <script>: Relaying
request, du='<null>', fs='udp:<SPCE_PublicIP>:5060' - M=BYE
R=sip:031<called#>@<SIPPeerIP>:5060;transport=udp
F=sip:2721<CalleR#>@<sipDomain> T=sip:031<called#>@<sipDomain>:5060 IP=udp:
127.0.0.1:5080 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:30:33 spce /usr/sbin/kamailio[12354]: INFO: <script>: New request
- M=ACK R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12354]: INFO: <script>: Mask local
B2BUA contact - M=ACK R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12354]: INFO: <script>: New request
- M=ACK R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12354]: INFO: <script>: Perform
loose-routing, du='<null>' - M=ACK R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12354]: INFO: <script>: Relaying
request, du='<null>', fs='udp:<SPCE_PublicIP>:5060' - M=ACK
R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12355]: INFO: <script>: New request
- M=BYE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12355]: INFO: <script>: New request
- M=BYE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12355]: INFO: <script>: Perform
loose-routing, du='<null>' - M=BYE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12355]: INFO: <script>: Relaying
request, du='<null>', fs='udp:<SPCE_PublicIP>:5060' - M=BYE
R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain> IP=udp:
127.0.0.1:5062 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12343]: INFO: <script>: Reply from
Outbound - S=200 - OK F=sip:2721<CalleR#>@<sipDomain>
T=sip:031<called#>@<sipDomain>:5060 IP=udp:<SIPPeerIP>:5060
ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:30:33 spce /usr/sbin/kamailio[12343]: INFO: <script>: Sending
reply, fs='udp:127.0.0.1:5060' - S=200 - OK F=sip:2721<CalleR#>@<sipDomain>
T=sip:031<called#>@<sipDomain>:5060 IP=udp:<SIPPeerIP>:5060
ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>_b2b-1
Apr 3 14:30:33 spce /usr/sbin/kamailio[12344]: INFO: <script>: Reply from
Outbound - S=200 - OK F=sip:031<called#>@<sipDomain>:5060
T=sip:WS001A001@<sipDomain>
IP=udp:<ClientPublicIP>:5060 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[12344]: INFO: <script>: Sending
reply, fs='udp:127.0.0.1:5060' - S=200 - OK
F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain>
IP=udp:<ClientPublicIP>:5060 ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Proxy:
Apr 3 14:25:38 spce /usr/sbin/kamailio[20178]: INFO: <script>: Relaying
request - M=ACK R=sip:127.0.0.1:5080 F=sip:WS001A001@<sipDomain>
T=sip:031<called#>@<sipDomain>:5060 IP=<ClientPublicIP>:5060 (127.0.0.1:5060)
ID=05f68e236804e86677f9cbff7afaf4b8@<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[20178]: INFO: <script>: New request
- M=INVITE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[20178]: INFO: <script>: Use
mediaproxy for forward direction for IPv4/IPv4 - M=INVITE
R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[20178]: INFO: <script>: Relaying
request - M=INVITE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:28:03 spce /usr/sbin/kamailio[20180]: INFO: <script>: NAT-Reply -
S=100 - Trying F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain>
IP=127.0.0.1:5080 (127.0.0.1:5060) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20176]: INFO: <script>: New request
- M=ACK R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20175]: INFO: <script>: New request
- M=BYE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20175]: INFO: <script>: Stop
mediaproxy for all branches - M=BYE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20176]: INFO: <script>: Relaying
request - M=ACK R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20175]: INFO: <script>: Relaying
request - M=BYE R=sip:WS001A001@<ClientPublicIP>:5060
F=sip:031<called#>@<sipDomain>:5060 T=sip:2721<CalleR#>@<sipDomain> IP=
127.0.0.1:5080 (127.0.0.1:5080) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20174]: INFO: <script>: NAT-Reply -
S=100 - Trying F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain>
IP=127.0.0.1:5080 (127.0.0.1:5060) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
Apr 3 14:30:33 spce /usr/sbin/kamailio[20177]: INFO: <script>: NAT-Reply -
S=200 - OK F=sip:031<called#>@<sipDomain>:5060 T=sip:WS001A001@<sipDomain>
IP=127.0.0.1:5080 (127.0.0.1:5060) ID=05f68e236804e86677f9cbff7afaf4b8@
<sipDomain>
On Tue, Feb 26, 2013 at 2:23 PM, Andrew Pogrebennyk <
apogrebennyk at sipwise.com> wrote:
On 02/26/2013 12:59 PM, Matthew Ogden wrote:
> Ok, so just to confirm:
>
> Current default settins:
> In the normal workins, a re-INVITE is sent, only once, and it normally has
> a 6s timeout to get back, (This setting increases that ay my discretion)
No, this is incorrect. a re-INVITE is sent once and then re-sent at the
500ms..1s..2s..4s points. If sems gets a 100 Trying back however, it
stops the retransmissions.
I have just checked your lb.log and looks like the re-INVITE was not
resent. Which leaves me wondering why it doesn't work for you like this.
Works on my test VM - there is a trace below. Could you send me the
trace from your server (ngrep -s0 -t -Wbyline -d any SIP port 5080) and
sems.log, after doing sems-stats -c "set_loglevel 3", so if this is a
sems problem we can report it to sems developers. Thanks.
#
U 2013/02/26 13:14:30.907027 127.0.0.1:5080 -> 127.0.0.1:5060
INVITE sip:29458701 at 10.10.8.25:41796;alias=192.168.51.1~16785~1 SIP/2.0.
Via: SIP/2.0/UDP 127.0.0.1:5080;branch=z9hG4bKAn9J9auH;rport.
From: <sip:0991003 at 192.168.51.210>;tag=0BDC0DDE-512CA7000006028C-B04DA700.
To: <sip:29458701 at 192.168.51.210>;tag=kgsCwYh0-BofYU1balBlUajMQN91IoFU.
CSeq: 12 INVITE.
Call-ID: s9QfC20n03xRSJxirjAwzkpHLt5tZ.x2_b2b-1.
Contact: <sip:127.0.0.1:5080>.
Route:
<sip:127.0.0.1;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes>,
<
sip:192.168.51.210;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes
>.
Supported: timer.
Session-Expires: 60.
Min-SE: 60.
Content-Type: application/sdp.
Content-Length: 284.
.
v=0.
o=- 3570869631 3570869632 IN IP4 192.168.51.210.
s=Blink 0.2.11 (Linux).
c=IN IP4 192.168.51.210.
t=0 0.
m=audio 30108 RTP/AVP 0 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=rtcp:50097.
a=sendonly.
a=oldmediaip:10.10.8.25.
a=direction:active.
#
U 2013/02/26 13:14:31.406203 127.0.0.1:5080 -> 127.0.0.1:5060
INVITE sip:29458701 at 10.10.8.25:41796;alias=192.168.51.1~16785~1 SIP/2.0.
Via: SIP/2.0/UDP 127.0.0.1:5080;branch=z9hG4bKAn9J9auH;rport.
From: <sip:0991003 at 192.168.51.210>;tag=0BDC0DDE-512CA7000006028C-B04DA700.
To: <sip:29458701 at 192.168.51.210>;tag=kgsCwYh0-BofYU1balBlUajMQN91IoFU.
CSeq: 12 INVITE.
Call-ID: s9QfC20n03xRSJxirjAwzkpHLt5tZ.x2_b2b-1.
Contact: <sip:127.0.0.1:5080>.
Route:
<sip:127.0.0.1;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes>,
<
sip:192.168.51.210;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes
>.
Supported: timer.
Session-Expires: 60.
Min-SE: 60.
Content-Type: application/sdp.
Content-Length: 284.
.
v=0.
o=- 3570869631 3570869632 IN IP4 192.168.51.210.
s=Blink 0.2.11 (Linux).
c=IN IP4 192.168.51.210.
t=0 0.
m=audio 30108 RTP/AVP 0 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=rtcp:50097.
a=sendonly.
a=oldmediaip:10.10.8.25.
a=direction:active.
#
U 2013/02/26 13:14:32.406204 127.0.0.1:5080 -> 127.0.0.1:5060
INVITE sip:29458701 at 10.10.8.25:41796;alias=192.168.51.1~16785~1 SIP/2.0.
Via: SIP/2.0/UDP 127.0.0.1:5080;branch=z9hG4bKAn9J9auH;rport.
From: <sip:0991003 at 192.168.51.210>;tag=0BDC0DDE-512CA7000006028C-B04DA700.
To: <sip:29458701 at 192.168.51.210>;tag=kgsCwYh0-BofYU1balBlUajMQN91IoFU.
CSeq: 12 INVITE.
Call-ID: s9QfC20n03xRSJxirjAwzkpHLt5tZ.x2_b2b-1.
Contact: <sip:127.0.0.1:5080>.
Route:
<sip:127.0.0.1;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes>,
<
sip:192.168.51.210;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes
>.
Supported: timer.
Session-Expires: 60.
Min-SE: 60.
Content-Type: application/sdp.
Content-Length: 284.
.
v=0.
o=- 3570869631 3570869632 IN IP4 192.168.51.210.
s=Blink 0.2.11 (Linux).
c=IN IP4 192.168.51.210.
t=0 0.
m=audio 30108 RTP/AVP 0 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=rtcp:50097.
a=sendonly.
a=oldmediaip:10.10.8.25.
a=direction:active.
#
U 2013/02/26 13:14:34.406147 127.0.0.1:5080 -> 127.0.0.1:5060
INVITE sip:29458701 at 10.10.8.25:41796;alias=192.168.51.1~16785~1 SIP/2.0.
Via: SIP/2.0/UDP 127.0.0.1:5080;branch=z9hG4bKAn9J9auH;rport.
From: <sip:0991003 at 192.168.51.210>;tag=0BDC0DDE-512CA7000006028C-B04DA700.
To: <sip:29458701 at 192.168.51.210>;tag=kgsCwYh0-BofYU1balBlUajMQN91IoFU.
CSeq: 12 INVITE.
Call-ID: s9QfC20n03xRSJxirjAwzkpHLt5tZ.x2_b2b-1.
Contact: <sip:127.0.0.1:5080>.
Route:
<sip:127.0.0.1;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes>,
<
sip:192.168.51.210;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes
>.
Supported: timer.
Session-Expires: 60.
Min-SE: 60.
Content-Type: application/sdp.
Content-Length: 284.
.
v=0.
o=- 3570869631 3570869632 IN IP4 192.168.51.210.
s=Blink 0.2.11 (Linux).
c=IN IP4 192.168.51.210.
t=0 0.
m=audio 30108 RTP/AVP 0 101.
a=rtpmap:0 PCMU/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=rtcp:50097.
a=sendonly.
a=oldmediaip:10.10.8.25.
a=direction:active.
#
U 2013/02/26 13:14:36.907011 127.0.0.1:5080 -> 127.0.0.1:5060
BYE sip:29458701 at 10.10.8.25:41796;alias=192.168.51.1~16785~1 SIP/2.0.
Via: SIP/2.0/UDP 127.0.0.1:5080;branch=z9hG4bKHdv4QaHY;rport.
From: <sip:0991003 at 192.168.51.210>;tag=0BDC0DDE-512CA7000006028C-B04DA700.
To: <sip:29458701 at 192.168.51.210>;tag=kgsCwYh0-BofYU1balBlUajMQN91IoFU.
CSeq: 13 BYE.
Call-ID: s9QfC20n03xRSJxirjAwzkpHLt5tZ.x2_b2b-1.
Route:
<sip:127.0.0.1;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes>,
<
sip:192.168.51.210;lr;r2=on;ftag=0BDC0DDE-512CA7000006028C-B04DA700;ngcplb=yes
>.
User-Agent: Sipwise NGCP Application Server.
Max-Forwards: 70.
Content-Length: 0.
.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/mailman/private/spce-user_lists.sipwise.com/attachments/20130403/fa478db7/attachment.html>
More information about the Spce-user
mailing list