[Spce-user] no inbound call - need assistance with subscriber # setup

[Jeremie Chism]

I guess I didn't respond to the list. I suspected it was a rewrite rule. I sent him my rewrite rules and it fixed incoming. 

Sent from my iPhone

On Apr 3, 2013, at 6:09 PM, Jon Bonilla (Manwe) <jbonilla at sipwise.com> wrote:

> El Wed, 3 Apr 2013 10:57:41 -0500
> Michael Johnson <dmchljhnsn at gmail.com> escribió:
> 
>> Is there anything that needs to be changed to be able to receive calls in the
>> conf or in the subscriber settings? I have the ce software setup and running
>> in the US - with a sip trunk provider (Phone Power). They send the call
>> (dids) in this format: sip:'10 digit #'@myipaddress They said that the ce was
>> responding with 101  and then 401 (line not found)... Do I need to revise the
>> dial rules? or the reg exp in the routing section in the y...conf file??? Any
>> suggestions would be very helpful at this point... I would like some paid
>> support, but dont need 10 hours worth. I would be very thankful if I could
>> hire someone to look over all of the setting and insure that everything is
>> properly configured and is working as designed... thx... Michael Johnson 
> 
> 
> Hi Michael
> 
> 401 is sent to request authorization on SUBSCRIBER requests. 404 would be not
> found.
> 
> 
> If the system is sending 404, most probably is because the 10 digit format they
> send is not matching any subscriber E164 number you have created. Maybe you
> need to use rewrite_rules.
> 
> The best for this is to check the /var/log/ngcp/kamailio-proxy.log logfile and
> grep it using the call_id value.
> 
> 
> Please check what they send, what you have created and attach the relevant
> parts of your logfile so we can see what's going on.
> 
> 
> btw, take a look to ngrep-sip for network capture of the traffic.
> 
> 
> 
> 
> 
> cheers,
> 
> Jon
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user