[Spce-user] Fwd: Hunting with voicemail

Daniel Grotti dgrotti at sipwise.com
Mon Feb 11 08:59:04 EST 2013


Hi Jeremie,
If one rings and it is not answered the system follows the next entry
(that what the hunting does). If the next entry is the voicebox it will
go into it, if it's another SIP URI it will call the SIP URI.

Daniel

 






On 02/11/2013 02:50 PM, Jeremie Chism wrote:
>
>
> Sent from my iPhone
>
> Begin forwarded message:
>
>>
>> One ringing after the other is fine. I don't need them to ring all at
>> once. What I was hoping for is if one rings and is not answered it
>> would go to voicemail on the main line instead of ringing through the
>> entire ring group. 
>>
>> Sent from my iPhone
>>
>> On Feb 11, 2013, at 7:34 AM, Daniel Grotti <dgrotti at sipwise.com
>> <mailto:dgrotti at sipwise.com>> wrote:
>>
>>> Hi jeremie,
>>> it's not possible to convert a hunt group into a ringgroup (o
>>> callgroup), so using the call forwards section you cannot call, for
>>> example, 3 different sip URI at the same time and if no answer go to
>>> voicemail.
>>>
>>> Here you can find some hints:
>>> http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html
>>>
>>> Also you can try this way:
>>>
>>> 1. create a dummy subscriber (D) where you can add your SIP URI to
>>> call as "permanent contact" (B and C)
>>> 2. Set call forward for you target SIP URI (A) as:
>>>         - Call D for 300sec
>>>         - Call Voicemail
>>>
>>> In this way, if you call A, the system will call the dummy
>>> subscriber D in parallel forking on B and C (so B and C will ring at
>>> the same time). After 300sec, if no answer the call will go to
>>> voicemail.
>>>
>>> The problem here is to use SIP permanent Contact for the dummy
>>> subscriber, that could be change over time.
>>>
>>>
>>> Cheers,
>>>
>>> Daniel
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On 02/09/2013 09:37 PM, Jeremie Chism wrote:
>>>> I have hunting down but there is one thing I haven't figured out. 
>>>>
>>>> I have a hunt group set for busy. What I would like it to do is ring the hunt group for a given time and if no answer go to voicemail for the main line. 
>>>>
>>>> Right now it rings through all numbers before going to voicemail. 
>>>>
>>>> Any help would be appreciated 
>>>>
>>>>
>>>>
>>>> Sent from my iPhone
>>>> _______________________________________________
>>>> Spce-user mailing list
>>>> Spce-user at lists.sipwise.com
>>>> http://lists.sipwise.com/listinfo/spce-user
>>>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130211/d65d1532/attachment-0001.html>


More information about the Spce-user mailing list