[Spce-user] Fwd: Hunting with voicemail
John Murray
john.murray at skyracktelecom.com
Mon Feb 11 09:03:00 EST 2013
Daniel,
Can the SIP URI be another local subscriber on the SPCE?
John
From: spce-user-bounces at lists.sipwise.com
[mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Daniel Grotti
Sent: 11 February 2013 13:59
To: Jeremie Chism
Cc: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Fwd: Hunting with voicemail
Hi Jeremie,
If one rings and it is not answered the system follows the next entry (that
what the hunting does). If the next entry is the voicebox it will go into
it, if it's another SIP URI it will call the SIP URI.
Daniel
On 02/11/2013 02:50 PM, Jeremie Chism wrote:
Sent from my iPhone
Begin forwarded message:
One ringing after the other is fine. I don't need them to ring all at once.
What I was hoping for is if one rings and is not answered it would go to
voicemail on the main line instead of ringing through the entire ring group.
Sent from my iPhone
On Feb 11, 2013, at 7:34 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:
Hi jeremie,
it's not possible to convert a hunt group into a ringgroup (o callgroup), so
using the call forwards section you cannot call, for example, 3 different
sip URI at the same time and if no answer go to voicemail.
Here you can find some hints:
http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html
Also you can try this way:
1. create a dummy subscriber (D) where you can add your SIP URI to call as
"permanent contact" (B and C)
2. Set call forward for you target SIP URI (A) as:
- Call D for 300sec
- Call Voicemail
In this way, if you call A, the system will call the dummy subscriber D in
parallel forking on B and C (so B and C will ring at the same time). After
300sec, if no answer the call will go to voicemail.
The problem here is to use SIP permanent Contact for the dummy subscriber,
that could be change over time.
Cheers,
Daniel
On 02/09/2013 09:37 PM, Jeremie Chism wrote:
I have hunting down but there is one thing I haven't figured out.
I have a hunt group set for busy. What I would like it to do is ring the
hunt group for a given time and if no answer go to voicemail for the main
line.
Right now it rings through all numbers before going to voicemail.
Any help would be appreciated
Sent from my iPhone
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130211/74f92b52/attachment-0001.html>
More information about the Spce-user
mailing list