[Spce-user] Fwd: Hunting with voicemail

[Daniel Grotti]

Yes, of course. It can be any number, inside or outside your domain.
Daniel



On 02/11/2013 03:03 PM, John Murray wrote:
>
> Daniel,
>
>  
>
> Can the SIP URI be another local subscriber on the SPCE?
>
>  
>
> John
>
>  
>
> *From:*spce-user-bounces at lists.sipwise.com
> [mailto:spce-user-bounces at lists.sipwise.com] *On Behalf Of *Daniel Grotti
> *Sent:* 11 February 2013 13:59
> *To:* Jeremie Chism
> *Cc:* spce-user at lists.sipwise.com
> *Subject:* Re: [Spce-user] Fwd: Hunting with voicemail
>
>  
>
> Hi Jeremie,
> If one rings and it is not answered the system follows the next entry
> (that what the hunting does). If the next entry is the voicebox it
> will go into it, if it's another SIP URI it will call the SIP URI.
>
> Daniel
>
>  
>
>
>
>
>
>
> On 02/11/2013 02:50 PM, Jeremie Chism wrote:
>
>
>
>     Sent from my iPhone
>
>
>     Begin forwarded message:
>
>          
>
>         One ringing after the other is fine. I don't need them to ring
>         all at once. What I was hoping for is if one rings and is not
>         answered it would go to voicemail on the main line instead of
>         ringing through the entire ring group. 
>
>         Sent from my iPhone
>
>
>         On Feb 11, 2013, at 7:34 AM, Daniel Grotti
>         <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>
>             Hi jeremie,
>             it's not possible to convert a hunt group into a ringgroup
>             (o callgroup), so using the call forwards section you
>             cannot call, for example, 3 different sip URI at the same
>             time and if no answer go to voicemail.
>
>             Here you can find some hints:
>             http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html
>
>             Also you can try this way:
>
>             1. create a dummy subscriber (D) where you can add your
>             SIP URI to call as "permanent contact" (B and C)
>             2. Set call forward for you target SIP URI (A) as:
>                     - Call D for 300sec
>                     - Call Voicemail
>
>             In this way, if you call A, the system will call the dummy
>             subscriber D in parallel forking on B and C (so B and C
>             will ring at the same time). After 300sec, if no answer
>             the call will go to voicemail.
>
>             The problem here is to use SIP permanent Contact for the
>             dummy subscriber, that could be change over time.
>
>
>             Cheers,
>
>             Daniel
>
>
>
>
>
>
>
>             On 02/09/2013 09:37 PM, Jeremie Chism wrote:
>
>                 I have hunting down but there is one thing I haven't figured out. 
>
>                  
>
>                 I have a hunt group set for busy. What I would like it to do is ring the hunt group for a given time and if no answer go to voicemail for the main line. 
>
>                  
>
>                 Right now it rings through all numbers before going to voicemail. 
>
>                  
>
>                 Any help would be appreciated 
>
>                  
>
>                  
>
>                  
>
>                 Sent from my iPhone
>
>                 _______________________________________________
>
>                 Spce-user mailing list
>
>                 Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>
>                 http://lists.sipwise.com/listinfo/spce-user
>
>              
>
>
>
>
>     _______________________________________________
>
>     Spce-user mailing list
>
>     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>
>     http://lists.sipwise.com/listinfo/spce-user
>
>  
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130211/86506934/attachment-0001.html>