[Spce-user] Fwd: Hunting with voicemail

Tue Feb 12 11:56:07 EST 2013

Daniel,

What format would I enter the local subscriber in the permanent contact
field?

I have a local user phone4 at skyrack.net with number 442034567890 and the SPCE
is 109.100.100.102.

Should I use sip:phone4.net or sip:442034567890 at 109.100.100.102

I have tried both and get SIP/2.0 500 I'm terribly sorry, server error
occurred (6/TM)'

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Performing
location lookup with main subscriber -
R=sip:hunt1-skyrack at skyrack.net;user=phone ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Dialog set
mark type to incoming - R=sip:hunt1-skyrack at skyrack.net;user=phone
ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Local user
online, using registered contact as user - R=sip:phone4 at skyrack.net
ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt-salem03 /usr/sbin/kamailio[7866]: INFO: <script>:
Setting acc source-leg for uuid '0':
'0|07987654321|195.195.195.195|07xxxxxxxxx|||<null>|||0|call|<null>|13606877
06.092211' - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Setting acc
destination-leg for uuid 'e2827c83-1f6b-4c0c-b882-fb80ec97b97c':
'0||Skyrack|2|02xxxxxxxxxx|e2827c83-1f6b-4c0c-b882-fb80ec97b97c|hunt1-skyrac
k|skyrack.net|44xxxxxxxxxxxx|109.xx.xx.xx' - R=sip:phone4 at skyrack.net
ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Relaying
request, du='sip:10.10.10.1:5060;lr' - R=sip:phone4 at skyrack.net
ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Dropping local
branch - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: ERROR: sl [sl_funcs.c:371]:
ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (6/SL)

Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Stop
mediaproxy for current branch using first Via - R=sip:phone4 at skyrack.net
ID=1572292-3569676506-84563 at MSX27

Thanks

John

From: Daniel Grotti [mailto:dgrotti at sipwise.com] 
Sent: 11 February 2013 14:06
To: John Murray
Cc: 'Jeremie Chism'; spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Fwd: Hunting with voicemail

Yes, of course. It can be any number, inside or outside your domain.
Daniel

On 02/11/2013 03:03 PM, John Murray wrote:

Daniel,

Can the SIP URI be another local subscriber on the SPCE?

John

From: spce-user-bounces at lists.sipwise.com
[mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Daniel Grotti
Sent: 11 February 2013 13:59
To: Jeremie Chism
Cc: spce-user at lists.sipwise.com
Subject: Re: [Spce-user] Fwd: Hunting with voicemail

Hi Jeremie,
If one rings and it is not answered the system follows the next entry (that
what the hunting does). If the next entry is the voicebox it will go into
it, if it's another SIP URI it will call the SIP URI.

Daniel

On 02/11/2013 02:50 PM, Jeremie Chism wrote:

Sent from my iPhone

Begin forwarded message:

One ringing after the other is fine. I don't need them to ring all at once.
What I was hoping for is if one rings and is not answered it would go to
voicemail on the main line instead of ringing through the entire ring group.

Sent from my iPhone

On Feb 11, 2013, at 7:34 AM, Daniel Grotti <dgrotti at sipwise.com> wrote:

Hi jeremie,
it's not possible to convert a hunt group into a ringgroup (o callgroup), so
using the call forwards section you cannot call, for example, 3 different
sip URI at the same time and if no answer go to voicemail.

Here you can find some hints:
http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html

Also you can try this way:

1. create a dummy subscriber (D) where you can add your SIP URI to call as
"permanent contact" (B and C)
2. Set call forward for you target SIP URI (A) as:
        - Call D for 300sec
        - Call Voicemail

In this way, if you call A, the system will call the dummy subscriber D in
parallel forking on B and C (so B and C will ring at the same time). After
300sec, if no answer the call will go to voicemail.

The problem here is to use SIP permanent Contact for the dummy subscriber,
that could be change over time.

Cheers,

Daniel

On 02/09/2013 09:37 PM, Jeremie Chism wrote:

I have hunting down but there is one thing I haven't figured out. 

I have a hunt group set for busy. What I would like it to do is ring the
hunt group for a given time and if no answer go to voicemail for the main
line. 

Right now it rings through all numbers before going to voicemail. 

Any help would be appreciated 

Sent from my iPhone
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user

_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130212/431a5ad0/attachment-0001.html>