[Spce-user] Fwd: Hunting with voicemail
Daniel Grotti
dgrotti at sipwise.com
Tue Feb 12 12:03:39 EST 2013
Hi John,
you should specify using the following format:
sip:SIP_USERNAME at SIP_DOMAIN:PORT
so, if your domain name on SPCE is 109.100.100.102, for the subscriber
"phone4 at 109.100.100.102" you should set:
sip: phone4 at 109.100.100.102:PORT
where PORT is the SIP port of the client used to register. Of course
this port must be open from the client side.
Regards,
Daniel
On 02/12/2013 05:56 PM, John Murray wrote:
>
> Daniel,
>
>
>
> What format would I enter the local subscriber in the permanent
> contact field?
>
> I have a local user phone4 at skyrack.net <mailto:phone4 at skyrack.net>
> with number 442034567890 and the SPCE is 109.100.100.102.
>
> Should I use sip:phone4.net or sip:442034567890 at 109.100.100.102
> <mailto:442034567890 at 109.100.100.102>
>
>
>
> I have tried both and get SIP/2.0 500 I'm terribly sorry, server error
> occurred (6/TM)'
>
>
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>:
> Performing location lookup with main subscriber -
> R=sip:hunt1-skyrack at skyrack.net;user=phone
> ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Dialog
> set mark type to incoming - R=sip:hunt1-skyrack at skyrack.net;user=phone
> ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Local
> user online, using registered contact as user -
> R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt-salem03 /usr/sbin/kamailio[7866]: INFO: <script>:
> Setting acc source-leg for uuid '0':
> '0|07987654321|195.195.195.195|07xxxxxxxxx|||<null>|||0|call|<null>|1360687706.092211'
> - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Setting
> acc destination-leg for uuid 'e2827c83-1f6b-4c0c-b882-fb80ec97b97c':
> '0||Skyrack|2|02xxxxxxxxxx|e2827c83-1f6b-4c0c-b882-fb80ec97b97c|hunt1-skyrack|skyrack.net|44xxxxxxxxxxxx|109.xx.xx.xx'
> - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Relaying
> request, du='sip:10.10.10.1:5060;lr' - R=sip:phone4 at skyrack.net
> ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Dropping
> local branch - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: ERROR: sl
> [sl_funcs.c:371]: ERROR: sl_reply_error used: I'm terribly sorry,
> server error occurred (6/SL)
>
> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Stop
> mediaproxy for current branch using first Via -
> R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>
>
>
> Thanks
>
>
>
> John
>
>
>
>
>
> *From:*Daniel Grotti [mailto:dgrotti at sipwise.com]
> *Sent:* 11 February 2013 14:06
> *To:* John Murray
> *Cc:* 'Jeremie Chism'; spce-user at lists.sipwise.com
> *Subject:* Re: [Spce-user] Fwd: Hunting with voicemail
>
>
>
> Yes, of course. It can be any number, inside or outside your domain.
> Daniel
>
>
>
> On 02/11/2013 03:03 PM, John Murray wrote:
>
> Daniel,
>
>
>
> Can the SIP URI be another local subscriber on the SPCE?
>
>
>
> John
>
>
>
> *From:*spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>
> [mailto:spce-user-bounces at lists.sipwise.com] *On Behalf Of *Daniel
> Grotti
> *Sent:* 11 February 2013 13:59
> *To:* Jeremie Chism
> *Cc:* spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> *Subject:* Re: [Spce-user] Fwd: Hunting with voicemail
>
>
>
> Hi Jeremie,
> If one rings and it is not answered the system follows the next
> entry (that what the hunting does). If the next entry is the
> voicebox it will go into it, if it's another SIP URI it will call
> the SIP URI.
>
> Daniel
>
>
>
>
>
>
>
>
> On 02/11/2013 02:50 PM, Jeremie Chism wrote:
>
>
>
> Sent from my iPhone
>
>
> Begin forwarded message:
>
>
>
> One ringing after the other is fine. I don't need them to
> ring all at once. What I was hoping for is if one rings
> and is not answered it would go to voicemail on the main
> line instead of ringing through the entire ring group.
>
> Sent from my iPhone
>
>
> On Feb 11, 2013, at 7:34 AM, Daniel Grotti
> <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>
> Hi jeremie,
> it's not possible to convert a hunt group into a
> ringgroup (o callgroup), so using the call forwards
> section you cannot call, for example, 3 different sip
> URI at the same time and if no answer go to voicemail.
>
> Here you can find some hints:
> http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html
>
> Also you can try this way:
>
> 1. create a dummy subscriber (D) where you can add
> your SIP URI to call as "permanent contact" (B and C)
> 2. Set call forward for you target SIP URI (A) as:
> - Call D for 300sec
> - Call Voicemail
>
> In this way, if you call A, the system will call the
> dummy subscriber D in parallel forking on B and C (so
> B and C will ring at the same time). After 300sec, if
> no answer the call will go to voicemail.
>
> The problem here is to use SIP permanent Contact for
> the dummy subscriber, that could be change over time.
>
>
> Cheers,
>
> Daniel
>
>
>
>
>
>
>
> On 02/09/2013 09:37 PM, Jeremie Chism wrote:
>
> I have hunting down but there is one thing I haven't figured out.
>
>
>
> I have a hunt group set for busy. What I would like it to do is ring the hunt group for a given time and if no answer go to voicemail for the main line.
>
>
>
> Right now it rings through all numbers before going to voicemail.
>
>
>
> Any help would be appreciated
>
>
>
>
>
>
>
> Sent from my iPhone
>
> _______________________________________________
>
> Spce-user mailing list
>
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>
> http://lists.sipwise.com/listinfo/spce-user
>
>
>
>
>
>
>
> _______________________________________________
>
> Spce-user mailing list
>
> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>
> http://lists.sipwise.com/listinfo/spce-user
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130212/32db5aac/attachment-0001.html>
More information about the Spce-user
mailing list