[Spce-user] Fwd: Hunting with voicemail

Daniel Grotti dgrotti at sipwise.com
Tue Feb 12 12:13:04 EST 2013


Hi John,
I made a mistake, sorry. I was thinking about something else...
The format must be:

sip:SIP_USERNAME at CLIENT_IP:CLIENT_PORT


Looks like exactly the format you can see under "Subscriber -> Active
Device Registrations".

Daniel





On 02/12/2013 06:03 PM, Daniel Grotti wrote:
> Hi John,
> you should specify using the following format:
>
> sip:SIP_USERNAME at SIP_DOMAIN:PORT
>
> so, if your domain name on SPCE is 109.100.100.102, for the subscriber
> "phone4 at 109.100.100.102" you should set:
>
> sip: phone4 at 109.100.100.102:PORT
>
> where PORT is the SIP port of the client used to register. Of course
> this port must be open from the client side.
>
>
> Regards,
> Daniel
>
>
>
>
> On 02/12/2013 05:56 PM, John Murray wrote:
>>
>> Daniel,
>>
>>  
>>
>> What format would I enter the local subscriber in the permanent
>> contact field?
>>
>> I have a local user phone4 at skyrack.net <mailto:phone4 at skyrack.net>
>> with number 442034567890 and the SPCE is 109.100.100.102.
>>
>> Should I use sip:phone4.net or sip:442034567890 at 109.100.100.102
>> <mailto:442034567890 at 109.100.100.102>
>>
>>  
>>
>> I have tried both and get SIP/2.0 500 I'm terribly sorry, server
>> error occurred (6/TM)'
>>
>>  
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>:
>> Performing location lookup with main subscriber -
>> R=sip:hunt1-skyrack at skyrack.net;user=phone
>> ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Dialog
>> set mark type to incoming -
>> R=sip:hunt1-skyrack at skyrack.net;user=phone
>> ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Local
>> user online, using registered contact as user -
>> R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt-salem03 /usr/sbin/kamailio[7866]: INFO: <script>:
>> Setting acc source-leg for uuid '0':
>> '0|07987654321|195.195.195.195|07xxxxxxxxx|||<null>|||0|call|<null>|1360687706.092211'
>> - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Setting
>> acc destination-leg for uuid 'e2827c83-1f6b-4c0c-b882-fb80ec97b97c':
>> '0||Skyrack|2|02xxxxxxxxxx|e2827c83-1f6b-4c0c-b882-fb80ec97b97c|hunt1-skyrack|skyrack.net|44xxxxxxxxxxxx|109.xx.xx.xx'
>> - R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>:
>> Relaying request, du='sip:10.10.10.1:5060;lr' -
>> R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>:
>> Dropping local branch - R=sip:phone4 at skyrack.net
>> ID=1572292-3569676506-84563 at MSX27
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: ERROR: sl
>> [sl_funcs.c:371]: ERROR: sl_reply_error used: I'm terribly sorry,
>> server error occurred (6/SL)
>>
>> Feb 12 16:48:26 skt /usr/sbin/kamailio[7866]: INFO: <script>: Stop
>> mediaproxy for current branch using first Via -
>> R=sip:phone4 at skyrack.net ID=1572292-3569676506-84563 at MSX27
>>
>>  
>>
>> Thanks
>>
>>  
>>
>> John
>>
>>  
>>
>>  
>>
>> *From:*Daniel Grotti [mailto:dgrotti at sipwise.com]
>> *Sent:* 11 February 2013 14:06
>> *To:* John Murray
>> *Cc:* 'Jeremie Chism'; spce-user at lists.sipwise.com
>> *Subject:* Re: [Spce-user] Fwd: Hunting with voicemail
>>
>>  
>>
>> Yes, of course. It can be any number, inside or outside your domain.
>> Daniel
>>
>>
>>
>> On 02/11/2013 03:03 PM, John Murray wrote:
>>
>>     Daniel,
>>
>>      
>>
>>     Can the SIP URI be another local subscriber on the SPCE?
>>
>>      
>>
>>     John
>>
>>      
>>
>>     *From:*spce-user-bounces at lists.sipwise.com
>>     <mailto:spce-user-bounces at lists.sipwise.com>
>>     [mailto:spce-user-bounces at lists.sipwise.com] *On Behalf Of
>>     *Daniel Grotti
>>     *Sent:* 11 February 2013 13:59
>>     *To:* Jeremie Chism
>>     *Cc:* spce-user at lists.sipwise.com
>>     <mailto:spce-user at lists.sipwise.com>
>>     *Subject:* Re: [Spce-user] Fwd: Hunting with voicemail
>>
>>      
>>
>>     Hi Jeremie,
>>     If one rings and it is not answered the system follows the next
>>     entry (that what the hunting does). If the next entry is the
>>     voicebox it will go into it, if it's another SIP URI it will call
>>     the SIP URI.
>>
>>     Daniel
>>
>>      
>>
>>
>>
>>
>>
>>
>>     On 02/11/2013 02:50 PM, Jeremie Chism wrote:
>>
>>
>>
>>         Sent from my iPhone
>>
>>
>>         Begin forwarded message:
>>
>>              
>>
>>             One ringing after the other is fine. I don't need them to
>>             ring all at once. What I was hoping for is if one rings
>>             and is not answered it would go to voicemail on the main
>>             line instead of ringing through the entire ring group. 
>>
>>             Sent from my iPhone
>>
>>
>>             On Feb 11, 2013, at 7:34 AM, Daniel Grotti
>>             <dgrotti at sipwise.com <mailto:dgrotti at sipwise.com>> wrote:
>>
>>                 Hi jeremie,
>>                 it's not possible to convert a hunt group into a
>>                 ringgroup (o callgroup), so using the call forwards
>>                 section you cannot call, for example, 3 different sip
>>                 URI at the same time and if no answer go to voicemail.
>>
>>                 Here you can find some hints:
>>                 http://lists.sipwise.com/pipermail/spce-user/2011-July/000505.html
>>
>>                 Also you can try this way:
>>
>>                 1. create a dummy subscriber (D) where you can add
>>                 your SIP URI to call as "permanent contact" (B and C)
>>                 2. Set call forward for you target SIP URI (A) as:
>>                         - Call D for 300sec
>>                         - Call Voicemail
>>
>>                 In this way, if you call A, the system will call the
>>                 dummy subscriber D in parallel forking on B and C (so
>>                 B and C will ring at the same time). After 300sec, if
>>                 no answer the call will go to voicemail.
>>
>>                 The problem here is to use SIP permanent Contact for
>>                 the dummy subscriber, that could be change over time.
>>
>>
>>                 Cheers,
>>
>>                 Daniel
>>
>>
>>
>>
>>
>>
>>
>>                 On 02/09/2013 09:37 PM, Jeremie Chism wrote:
>>
>>                     I have hunting down but there is one thing I haven't figured out. 
>>
>>                      
>>
>>                     I have a hunt group set for busy. What I would like it to do is ring the hunt group for a given time and if no answer go to voicemail for the main line. 
>>
>>                      
>>
>>                     Right now it rings through all numbers before going to voicemail. 
>>
>>                      
>>
>>                     Any help would be appreciated 
>>
>>                      
>>
>>                      
>>
>>                      
>>
>>                     Sent from my iPhone
>>
>>                     _______________________________________________
>>
>>                     Spce-user mailing list
>>
>>                     Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>
>>                     http://lists.sipwise.com/listinfo/spce-user
>>
>>                  
>>
>>
>>
>>
>>
>>         _______________________________________________
>>
>>         Spce-user mailing list
>>
>>         Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>
>>         http://lists.sipwise.com/listinfo/spce-user
>>
>>      
>>
>>  
>>
>
>
>
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130212/5eb695d9/attachment-0001.html>


More information about the Spce-user mailing list