[Spce-user] Subscriber NAT - No inbound calls

[Skyler]

Looking further, I have:

modparam("registrar", "default_expires", [% kamailio.proxy.default_expires
%])
modparam("registrar", "min_expires", [% kamailio.proxy.min_expires %])
modparam("registrar", "max_expires", [% kamailio.proxy.max_expires %])
modparam("registrar", "method_filtering", 0)
modparam("registrar", "append_branches", 1)
modparam("registrar", "max_contacts", [%
kamailio.proxy.max_registrations_per_subscriber %])
modparam("registrar", "received_avp", "$avp(s:received)")
modparam("registrar", "use_path", 1)
modparam("registrar", "path_mode", 0)
modparam("registrar", "path_use_received", 1)

On Wed, Feb 20, 2013 at 11:00 AM, Skyler <skchopperguy at gmail.com> wrote:

> Hi,
>
>  Just recently added a user that is showing NAT 'yes' in the admin panel.
> That user is not able to receive inbound calls though due to NAT as SPCE
> appears to be sending to private IP instead of the received IP.
>
>  Looking at the contact (below) it may be due to extra < > within path=
> but I am not 100% sure if I made a custom change somewhere that affected
> this at some point in the past. Any suggestions on what I should be looking
> into to fix the NAT contact?
>
>
> skyler at lgn10:~$ sudo ngcp-kamctl proxy ul show
> 16613360423 at removeddomain.com
> Contact:: <sip:16613360423 at 192.168.1.105:5060
> ;rinstance=af3772052de0414f>;q=;expires=44;flags=0x0;cflags=0xC0;socket=<udp:
> 127.0.0.1:5062>;methods=0x13DF;received=<sip:170.120.241.98:5060>;user_agent=<X-Lite
> release 1100l stamp 47546>;path=<<sip:ngcp-lb at 127.0.0.1;lr;received='sip:
> 170.120.241.98:5060'>>
>
> Regards,
> Skyler
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130220/ea3e27b8/attachment-0001.html>