[Spce-user] Howto Register with a SIP Peer

[Daniel Grotti]

Hi Joern,

According to the Handbook, Chapter: 6.4.4.2. Registering at a Peering Server

"Unfortunately, the credentials configured above are not yet
automatically used to register the SPCE at your peer hosts. There is
however an easy manual way to do so, until this is addressed.

Configure your peering servers with the corresponding credentials in
/etc/ngcp-config/templates/etc/sems/etc/reg_agent.conf.tt2, then execute
ngcpcfg apply.

Be aware that this will force SEMS to restart, which will drop all calls."


Regards,
Daniel




On 06/19/2013 01:26 PM, Joern Stenkamp wrote:
> Hi,
> 
> I guess this question has been asked several times, but I didn't find a
> sufficient answer..... so here we go:
> 
> What are the necessary steps to register with a peer?
> 
> I have configured the a 2nd peer by the web admin interface:
> 
> ->Name: sipgate; IP:217.10.79.9;Port:5060;UDP;Weight:1
> 
> (still wondering why HOSTNAME is not a valid choice?!!)
> 
> Peer:sipgate:
> -> peer_auth_user: 12345678
> -> peer_auth_pass: secret
> -> peer_auth_realm: sipgate.de
> -> peer_auth_register: x
> 
> Not sending any REGISTER to sipgate....
> 
> -> peering rule (default with no other entry)
> 
> Not sending any REGISTER to sipgate....
> 
> 
> So what is missing?
> 
> 
> Best regards
>  Joern
> 
> 
> 
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user