[Spce-user] UC540

[Jeremie Chism]

Thanks.

I think we have it in the incoming dial plan. I will check.

On the rewrite rule did you do something special just for the uc520 or make
changes to the UC?

On Friday, May 3, 2013, Christopher Saroli wrote:

>  Yes I am in the US****
>
> ** **
>
> Did you add your DIDs to the incoming dial plan on the cisco box and
> assign them to a destination.****
>
> ** **
>
> Also could be your rewrite rules, the phone system wont by default take
> E.164****
>
> ** **
>
> ---------------------------------****
>
> *Christopher Saroli*
>
> csaroli at isysp.com <javascript:_e({}, 'cvml', 'csaroli at isysp.com');>****
>
> ** **
>
> *From:* Jeremie Chism [mailto:jchism2 at gmail.com <javascript:_e({},
> 'cvml', 'jchism2 at gmail.com');>]
> *Sent:* Friday, May 03, 2013 9:13 AM
> *To:* Christopher Saroli
> *Cc:* spce-user at lists.sipwise.com <javascript:_e({}, 'cvml',
> 'spce-user at lists.sipwise.com');>
> *Subject:* Re: UC540****
>
> ** **
>
> Thanks for the information. Are you in the US?  I have outbound working.
> Inbound gives me a busy signal.
>
> On Friday, May 3, 2013, Christopher Saroli wrote:****
>
> I have a UC520 configured with a sip trunk to sipwise.. What info were you
> looking for. Here is my sip-ua config if that helps
>
> sip-ua
>  credentials username {SUBSCRIBER USERNAME} password 7
> 13340213051811277A767B realm {SIPWISE IP ADDRESS}
>  keepalive target ipv4: {SIPWISE IP ADDRESS}:5060
>  authentication username {SUBSCRIBER USERNAME} password 7
> 053A130E2F585B04485744
>  no remote-party-id
>  retry invite 2
>  retry register 10
>  timers connect 100
>  timers keepalive active 100
>  registrar ipv4: {SIPWISE IP ADDRESS}:5060 expires 200
>  sip-server ipv4: {SIPWISE IP ADDRESS}:5060
>  host-registrar
> !
>
> -----Original Message-----
> From: spce-user-bounces at lists.sipwise.com [mailto:
> spce-user-bounces at lists.sipwise.com] On Behalf Of Jeremie Chism
> Sent: Tuesday, April 30, 2013 3:41 PM
> To: spce-user at lists.sipwise.com
> Subject: [Spce-user] UC540
>
> Looking for someone that has configured a uc540 with a sip trunk to
> sipwise that might be able to share some knowledge.
>
> Sent from my iPhone
> _______________________________________________
> Spce-user mailing list
> Spce-user at lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user****
>
>
>
> --
> Jeremie Chism
> Triton Communications****
>


-- 
Jeremie Chism
Triton Communications
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130503/4d1bec76/attachment-0001.html>