[Spce-user] UC540

[Christopher Saroli]

Nothing special for the uc500... all my subscribers are in the us so I'm always adding the 1 into sipwise and stripping the 1 out from sipwise.

So my uc500 and any other phone system for that matter that I deal with just gets 10 digits


---------------------------------
Christopher Saroli
csaroli at isysp.com<mailto:csaroli at isysp.com>
[ISS-Logo(Small)]
                                 586-226-7800 (Main Office)
                                 586-884-0800 (Direct)

From: Jeremie Chism [mailto:jchism2 at gmail.com]
Sent: Friday, May 03, 2013 9:24 AM
To: Christopher Saroli
Cc: spce-user at lists.sipwise.com
Subject: Re: UC540

Thanks.

I think we have it in the incoming dial plan. I will check.

On the rewrite rule did you do something special just for the uc520 or make changes to the UC?

On Friday, May 3, 2013, Christopher Saroli wrote:
Yes I am in the US

Did you add your DIDs to the incoming dial plan on the cisco box and assign them to a destination.

Also could be your rewrite rules, the phone system wont by default take E.164

---------------------------------
Christopher Saroli
csaroli at isysp.com<javascript:_e(%7b%7d,%20'cvml',%20'csaroli at isysp.com');>

From: Jeremie Chism [mailto:jchism2 at gmail.com<javascript:_e(%7b%7d,%20'cvml',%20'jchism2 at gmail.com');>]
Sent: Friday, May 03, 2013 9:13 AM
To: Christopher Saroli
Cc: spce-user at lists.sipwise.com<javascript:_e(%7b%7d,%20'cvml',%20'spce-user at lists.sipwise.com');>
Subject: Re: UC540

Thanks for the information. Are you in the US?  I have outbound working. Inbound gives me a busy signal.

On Friday, May 3, 2013, Christopher Saroli wrote:
I have a UC520 configured with a sip trunk to sipwise.. What info were you looking for. Here is my sip-ua config if that helps

sip-ua
 credentials username {SUBSCRIBER USERNAME} password 7 13340213051811277A767B realm {SIPWISE IP ADDRESS}
 keepalive target ipv4: {SIPWISE IP ADDRESS}:5060
 authentication username {SUBSCRIBER USERNAME} password 7 053A130E2F585B04485744
 no remote-party-id
 retry invite 2
 retry register 10
 timers connect 100
 timers keepalive active 100
 registrar ipv4: {SIPWISE IP ADDRESS}:5060 expires 200
 sip-server ipv4: {SIPWISE IP ADDRESS}:5060
 host-registrar
!

-----Original Message-----
From: spce-user-bounces at lists.sipwise.com<mailto:spce-user-bounces at lists.sipwise.com> [mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Jeremie Chism
Sent: Tuesday, April 30, 2013 3:41 PM
To: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>
Subject: [Spce-user] UC540

Looking for someone that has configured a uc540 with a sip trunk to sipwise that might be able to share some knowledge.

Sent from my iPhone
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>
http://lists.sipwise.com/listinfo/spce-user


--
Jeremie Chism
Triton Communications


--
Jeremie Chism
Triton Communications
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130503/0773c05b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3129 bytes
Desc: image001.jpg
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130503/0773c05b/attachment-0001.jpg>