[Spce-user] UC540

[Jeremie Chism]

If he can't figure it out would you mind taking a look if I can get remote
access?

On Friday, May 3, 2013, Christopher Saroli wrote:

>  You could always telnet into the device and run****
>
> ** **
>
> Terminal monitor****
>
> Debug ccsip messages****
>
> ** **
>
> This will give you some simple sip debugging on the cisco equipment****
>
> Remember to turn off debugging when done****
>
> ** **
>
> Or you could hire me….lol****
>
> ** **
>
> ---------------------------------****
>
> *Christopher Saroli*
>
> csaroli at isysp.com <javascript:_e({}, 'cvml', 'csaroli at isysp.com');>****
>
> ** **
>
> *From:* Jeremie Chism [mailto:jchism2 at gmail.com <javascript:_e({},
> 'cvml', 'jchism2 at gmail.com');>]
> *Sent:* Friday, May 03, 2013 9:33 AM
> *To:* Christopher Saroli
> *Cc:* spce-user at lists.sipwise.com <javascript:_e({}, 'cvml',
> 'spce-user at lists.sipwise.com');>
> *Subject:* Re: UC540****
>
> ** **
>
> All mine are in the US also. I'm thinking this is either not matching up
> or the incoming dial plan like you stated. A Cisco partner did the
> equipment and install.  He just wants me to provide service to it. I've
> just never fooled with one and I get the feeling he doesn't have a clue.
>
> On Friday, May 3, 2013, Christopher Saroli wrote:****
>
> Nothing special for the uc500… all my subscribers are in the us so I’m
> always adding the 1 into sipwise and stripping the 1 out from sipwise.****
>
>  ****
>
> So my uc500 and any other phone system for that matter that I deal with
> just gets 10 digits****
>
>  ****
>
>  ****
>
> ---------------------------------****
>
> *Christopher Saroli*****
>
> csaroli at isysp.com****
>
> [image: ISS-Logo(Small)]****
>
>                                  586-226-7800 (Main Office)****
>
>                                  586-884-0800 (Direct)****
>
>  ****
>
> *From:* Jeremie Chism [mailto:jchism2 at gmail.com]
> *Sent:* Friday, May 03, 2013 9:24 AM
> *To:* Christopher Saroli
> *Cc:* spce-user at lists.sipwise.com
> *Subject:* Re: UC540****
>
>  ****
>
> Thanks. ****
>
>  ****
>
> I think we have it in the incoming dial plan. I will check. ****
>
>  ****
>
> On the rewrite rule did you do something special just for the uc520 or
> make changes to the UC?
>
> On Friday, May 3, 2013, Christopher Saroli wrote:****
>
> Yes I am in the US****
>
>  ****
>
> Did you add your DIDs to the incoming dial plan on the cisco box and
> assign them to a destination.****
>
>  ****
>
> Also could be your rewrite rules, the phone system wont by default take
> E.164****
>
>  ****
>
> ---------------------------------****
>
> **
>


-- 
Jeremie Chism
Triton Communications
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130503/2f4812fa/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3129 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20130503/2f4812fa/attachment-0001.jpg>