[Spce-user] SOLVED Problem setting CLI for outgoing calls

[Flo]

Hello,

thank you for your help! This was the solution!

Florian


On 09/19/2013 10:34 AM, Andrew Pogrebennyk wrote:
> Hi,
> in the log we see
> Sep 19 08:42:46 sipwise /usr/sbin/kamailio[2239]: INFO: <script>:
> User-Provided CLI 'p000301.XXX' taken from From-User -
> R=sip:06XXXXXXXX at sipwise.XXX.at
>
> So the spce is configured to take callerid from the From username, not
> display-name. You should configure it properly by settings subscriber or
> domain preference inbound_upn to: From Display-name.
>
> Then make sure you are sending the User-Provided Number to domain/peer
> in From by checking the outbound_from_user preference.
>
> HTH.
> Andrew
>
> On 09/19/2013 09:15 AM, Flo wrote:
>> Hello,
>>
>> sorry, I forgot to mention, that I use 2.8er Version.
>>
>> I allowded both number for allowed_clis: 43720YYYYY* and 43720YYYYY9997!
>>
>> My SIP Provider allows me to use direct dialing.
>>
>> I attach both log files.
>>
>> Here is also my freepbx Config:
>> PEER Details:
>> username=p000301.XXX
>> type=peer
>> secret=YYYYYYYYYYYYYYY
>> qualify=5000
>> progressinband=yes
>> insecure=port,invite
>> host=sipwise.XXX.at
>> fromuser=p000301.XXX
>> fromdomain=sipwise.XXX.at
>> dtmfmode=inband
>> canreinvite=no
>>
>> USER Details:
>> username=p000301.XXX
>> type=user
>> secret=YYYYYYYYYYYYYYYYYY
>> qualify=5000
>> progressinband=yes
>> insecure=port,invite
>> host=sipwise.XXX.at
>> context=from-pstn
>>
>> Register String:
>> p000301.XXX:YYYYYYYYYYYYY at sipwise.XXX.at
>>
>> Thank you!
>>
>> Florian
>>
>> On 09/18/2013 05:16 PM, Jon Bonilla (Manwe) wrote:
>>> El Wed, 18 Sep 2013 17:05:42 +0200
>>> Flo <florian at acw.at> escribió:
>>>
>>>> Hello,
>>>>
>>>> I have some problems with sending my direct dial number to the calle.
>>>>
>>>> If I make a call to my mobile phone, I always see only the cli number
>>>> instead the cli number + direct dial number.
>>>>
>>>
>>>>
>>>>
>>>> In the subscribers preferences, I added the number 437201234569997 to
>>>> the "allowed_clis", but it did not work!
>>>>
>>>> Please, can someone give me some advices? I will give all informations
>>>> you need!
>>>
>>>
>>> Hi Florian
>>>
>>> Please send us the complete log of the call. grep by the ID
>>>
>>> Indeed, you need to set the extensions in your allowed clis you can
>>> set it as
>>> a whole block.
>>>
>>> It has been reported a problem with allowed_cli array in 3.x versions.
>>> Looks
>>> like the proxy only loads the last value and ignores the rest. It
>>> might be an
>>> issue for you too.
>>>
>>>
>>>
>>> _______________________________________________
>>> Spce-user mailing list
>>> Spce-user at lists.sipwise.com
>>> http://lists.sipwise.com/listinfo/spce-user
>>>
>>
>>
>>
>> _______________________________________________
>> Spce-user mailing list
>> Spce-user at lists.sipwise.com
>> http://lists.sipwise.com/listinfo/spce-user
>>
>