[Spce-user] Use subscriber name as contact for incoming calls

Martin Stix ms at pluteus.at
Mon Apr 7 06:00:08 EDT 2014


Hi Daniel!



I've set the subscriber outbound pai user to authentication user



[cid:image001.png at 01CF5258.D3C645E0]

In Wireshark on my PBX I don't see PAI coming.



Tried to call from my mobile to my pbx.

[cid:image002.png at 01CF5259.0462BB20]



Regards





mit freundlichen Grüßen

best regards

Martin Stix

CEO

pluteus communication solutions

ms at pluteus.at

www.pluteus.at

Dampfsägestraße 17

3300 Amstetten

Austria

tel.: +43 7472 28165 20

fax.: +43 7472 28165 22



-----Ursprüngliche Nachricht-----
Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
Gesendet: Montag, 07. April 2014 11:42
An: Martin Stix
Cc: spce-user at lists.sipwise.com
Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as contact for incoming calls



Hi Martin,

we currently do not set RPID header for outbound calls, we can just read an RPID header for incoming calls setting inbound_upn or inbound_npn.



What you can use is the PAI, you can set the "outbound_pai_user" value in SIP Peering/Subscriber Preferences.





Daniel











On 04/07/2014 11:21 AM, Martin Stix wrote:

> Hi!

>

> Could I use Remote Party ID for that, and if yes, how?

> I don't mind the place where subscriber ID is being sent, except from user part.

>

> Thanks

>

>

> mit freundlichen Grüßen

> best regards

> Martin Stix

> CEO

> pluteus communication solutions

> ms at pluteus.at<mailto:ms at pluteus.at>

> www.pluteus.at<http://www.pluteus.at>

> Dampfsägestraße 17

> 3300 Amstetten

> Austria

> tel.: +43 7472 28165 20

> fax.: +43 7472 28165 22

>

> -----Ursprüngliche Nachricht-----

> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]

> Gesendet: Dienstag, 01. April 2014 12:08

> An: Martin Stix

> Cc: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>

> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as contact for

> incoming calls

>

> Hi Martin,

>

> this is something you can't achieve.

> It's not the contact the header to use as source identifier, but From or P-Asserted-Identity.

> Contact header can't be changed.

> Contact header is used as RURI in ACK and BYE, so if you change that that messeges will be sent to the wrong URI. They must be sent back to NGCP LB.

>

> Daniel

>

>

>

>

>

>

> On 04/01/2014 12:02 PM, Martin Stix wrote:

>> Hi!

>>

>> Sorry, other way round, I have a 3CX PBX registered as subscriber on sipwise.

>> When a call is made from PSTN to Sipwise to 3CX PBX it would be great to have the contact of the subscriber in contact field, and not ngcp-lb.

>> So it makes live easier for us writing templates for 3CX and roll it out to customers, because 3CX accepts the call in that case without having the customer doing some source identifiers and stuff in the 3CX. It is mainly because one customer on one subscriber can have more than 1 number. So we use the contact as source identifier.

>>

>> regards

>>

>>

>> mit freundlichen Grüßen

>> best regards

>> Martin Stix

>> CEO

>> pluteus communication solutions

>> ms at pluteus.at<mailto:ms at pluteus.at>

>> www.pluteus.at<http://www.pluteus.at>

>> Dampfsägestraße 17

>> 3300 Amstetten

>> Austria

>> tel.: +43 7472 28165 20

>> fax.: +43 7472 28165 22

>>

>> -----Ursprüngliche Nachricht-----

>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]

>> Gesendet: Dienstag, 01. April 2014 11:57

>> An: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>

>> Cc: Martin Stix

>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for

>> incoming calls

>>

>> Hi Martin,

>> if you want to authenticate incoming calls from a sip trunk (something we don't do) you have to register your siptrunk as subscriber on NGCP.

>> We don't authenticate incoming calls from Peering servers.

>>

>> Daniel

>>

>>

>>

>>

>>

>>

>>

>> On 03/31/2014 05:54 PM, Martin Stix wrote:

>>> Hi Daniel!

>>>

>>> It just would be nice to authenticate incoming calls via this contact, in case of siptrunks with more than one main number, instead of using IP or domain on pbx's.

>>> Would there be a way?

>>>

>>> Regards

>>>

>>>

>>> mit freundlichen Grüßen

>>> best regards

>>> Martin Stix

>>> CEO

>>> pluteus communication solutions

>>> ms at pluteus.at<mailto:ms at pluteus.at>

>>> www.pluteus.at<http://www.pluteus.at>

>>> Dampfsägestraße 17

>>> 3300 Amstetten

>>> Austria

>>> tel.: +43 7472 28165 20

>>> fax.: +43 7472 28165 22

>>>

>>> -----Ursprüngliche Nachricht-----

>>> Von: spce-user-bounces at lists.sipwise.com<mailto:spce-user-bounces at lists.sipwise.com>

>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von Daniel

>>> Grotti

>>> Gesendet: Freitag, 07. Februar 2014 13:21

>>> An: spce-user at lists.sipwise.com<mailto:spce-user at lists.sipwise.com>

>>> Betreff: Re: [Spce-user] Use subscriber name as contact for incoming

>>> calls

>>>

>>> Hi,

>>> you shouldn't touch that contact, there is no need to change the username, cause that's the username/contact of LB.

>>>

>>> Daniel

>>>

>>>

>>> On 02/07/2014 10:19 AM, Martin Stix wrote:

>>>> Hi!

>>>>

>>>>

>>>>

>>>> How can I change incoming contact for calls going to subscribers to

>>>> use the subscriber name instead of ngcp-lb?

>>>>

>>>>

>>>>

>>>>

>>>>

>>>> Thanks

>>>>

>>>>

>>>>

>>>>

>>>>

>>>> mit freundlichen Grüßen

>>>> best regards

>>>>

>>>> *Martin Stix*

>>>>

>>>> CEO

>>>> pluteus communication solutions

>>>> ms at pluteus.at<mailto:ms at pluteus.at> <mailto:ms at pluteus.at>

>>>>

>>>> www.pluteus.at<http://www.pluteus.at>

>>>>

>>>> Dampfsägestraße 17

>>>> 3300 Amstetten

>>>> Austria

>>>> tel.: +43 7472 28165 20

>>>> fax.: +43 7472 28165 22

>>>>

>>>>

>>>>

>>>>

>>>>

>>>> _______________________________________________

>>>> Spce-user mailing list

>>>> Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>

>>>> http://lists.sipwise.com/listinfo/spce-user

>>>>

>>>

>>> _______________________________________________

>>> Spce-user mailing list

>>> Spce-user at lists.sipwise.com<mailto:Spce-user at lists.sipwise.com>

>>> http://lists.sipwise.com/listinfo/spce-user

>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20140407/484c88ec/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 5185 bytes
Desc: image001.png
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20140407/484c88ec/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 53256 bytes
Desc: image002.png
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20140407/484c88ec/attachment-0003.png>


More information about the Spce-user mailing list