[Spce-user] Use subscriber name as contact for incoming calls

Daniel Grotti dgrotti at sipwise.com
Mon Apr 7 06:08:09 EDT 2014 

Hi Martin,
can you provide the kamailio-proxy.log fro this callid ?

Daniel



On 04/07/2014 12:00 PM, Martin Stix wrote:
> Hi Daniel!
> 
>  
> 
> I've set the subscriber outbound pai user to authentication user
> 
>  
> 
> In Wireshark on my PBX I don’t see PAI coming.
> 
>  
> 
> Tried to call from my mobile to my pbx.
> 
>  
> 
> Regards
> 
>  
> 
>  
> 
> mit freundlichen Grüßen
> 
> best regards
> 
> Martin Stix
> 
> CEO
> 
> pluteus communication solutions
> 
> ms at pluteus.at
> 
> www.pluteus.at
> 
> Dampfsägestraße 17
> 
> 3300 Amstetten
> 
> Austria
> 
> tel.: +43 7472 28165 20
> 
> fax.: +43 7472 28165 22
> 
>  
> 
> -----Ursprüngliche Nachricht-----
> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
> Gesendet: Montag, 07. April 2014 11:42
> An: Martin Stix
> Cc: spce-user at lists.sipwise.com
> Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as contact for
> incoming calls
> 
>  
> 
> Hi Martin,
> 
> we currently do not set RPID header for outbound calls, we can just read
> an RPID header for incoming calls setting inbound_upn or inbound_npn.
> 
>  
> 
> What you can use is the PAI, you can set the "outbound_pai_user" value
> in SIP Peering/Subscriber Preferences.
> 
>  
> 
>  
> 
> Daniel
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
> On 04/07/2014 11:21 AM, Martin Stix wrote:
> 
>> Hi!
> 
>>
> 
>> Could I use Remote Party ID for that, and if yes, how?
> 
>> I don't mind the place where subscriber ID is being sent, except from
> user part.
> 
>>
> 
>> Thanks
> 
>>
> 
>>
> 
>> mit freundlichen Grüßen
> 
>> best regards
> 
>> Martin Stix
> 
>> CEO
> 
>> pluteus communication solutions
> 
>> ms at pluteus.at <mailto:ms at pluteus.at>
> 
>> www.pluteus.at <http://www.pluteus.at>
> 
>> Dampfsägestraße 17
> 
>> 3300 Amstetten
> 
>> Austria
> 
>> tel.: +43 7472 28165 20
> 
>> fax.: +43 7472 28165 22
> 
>>
> 
>> -----Ursprüngliche Nachricht-----
> 
>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
> 
>> Gesendet: Dienstag, 01. April 2014 12:08
> 
>> An: Martin Stix
> 
>> Cc: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> 
>> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as contact for
> 
>> incoming calls
> 
>>
> 
>> Hi Martin,
> 
>>
> 
>> this is something you can't achieve.
> 
>> It's not the contact the header to use as source identifier, but From
> or P-Asserted-Identity.
> 
>> Contact header can't be changed.
> 
>> Contact header is used as RURI in ACK and BYE, so if you change that
> that messeges will be sent to the wrong URI. They must be sent back to
> NGCP LB.
> 
>>
> 
>> Daniel
> 
>>
> 
>>
> 
>>
> 
>>
> 
>>
> 
>>
> 
>> On 04/01/2014 12:02 PM, Martin Stix wrote:
> 
>>> Hi!
> 
>>> 
> 
>>> Sorry, other way round, I have a 3CX PBX registered as subscriber on
> sipwise.
> 
>>> When a call is made from PSTN to Sipwise to 3CX PBX it would be great
> to have the contact of the subscriber in contact field, and not ngcp-lb.
> 
>>> So it makes live easier for us writing templates for 3CX and roll it
> out to customers, because 3CX accepts the call in that case without
> having the customer doing some source identifiers and stuff in the 3CX.
> It is mainly because one customer on one subscriber can have more than 1
> number. So we use the contact as source identifier.
> 
>>> 
> 
>>> regards
> 
>>> 
> 
>>> 
> 
>>> mit freundlichen Grüßen
> 
>>> best regards
> 
>>> Martin Stix
> 
>>> CEO
> 
>>> pluteus communication solutions
> 
>>> ms at pluteus.at <mailto:ms at pluteus.at>
> 
>>> www.pluteus.at <http://www.pluteus.at>
> 
>>> Dampfsägestraße 17
> 
>>> 3300 Amstetten
> 
>>> Austria
> 
>>> tel.: +43 7472 28165 20
> 
>>> fax.: +43 7472 28165 22
> 
>>> 
> 
>>> -----Ursprüngliche Nachricht-----
> 
>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
> 
>>> Gesendet: Dienstag, 01. April 2014 11:57
> 
>>> An: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> 
>>> Cc: Martin Stix
> 
>>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for
> 
>>> incoming calls
> 
>>> 
> 
>>> Hi Martin,
> 
>>> if you want to authenticate incoming calls from a sip trunk
> (something we don't do) you have to register your siptrunk as subscriber
> on NGCP.
> 
>>> We don't authenticate incoming calls from Peering servers.
> 
>>> 
> 
>>> Daniel
> 
>>> 
> 
>>> 
> 
>>> 
> 
>>> 
> 
>>> 
> 
>>> 
> 
>>> 
> 
>>> On 03/31/2014 05:54 PM, Martin Stix wrote:
> 
>>>> Hi Daniel!
> 
>>>> 
> 
>>>> It just would be nice to authenticate incoming calls via this
> contact, in case of siptrunks with more than one main number, instead of
> using IP or domain on pbx's.
> 
>>>> Would there be a way?
> 
>>>> 
> 
>>>> Regards
> 
>>>> 
> 
>>>> 
> 
>>>> mit freundlichen Grüßen
> 
>>>> best regards
> 
>>>> Martin Stix
> 
>>>> CEO
> 
>>>> pluteus communication solutions
> 
>>>> ms at pluteus.at <mailto:ms at pluteus.at>
> 
>>>> www.pluteus.at <http://www.pluteus.at>
> 
>>>> Dampfsägestraße 17
> 
>>>> 3300 Amstetten
> 
>>>> Austria
> 
>>>> tel.: +43 7472 28165 20
> 
>>>> fax.: +43 7472 28165 22
> 
>>>> 
> 
>>>> -----Ursprüngliche Nachricht-----
> 
>>>> Von: spce-user-bounces at lists.sipwise.com
> <mailto:spce-user-bounces at lists.sipwise.com>
> 
>>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von Daniel
> 
>>>> Grotti
> 
>>>> Gesendet: Freitag, 07. Februar 2014 13:21
> 
>>>> An: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
> 
>>>> Betreff: Re: [Spce-user] Use subscriber name as contact for incoming
> 
>>>> calls
> 
>>>> 
> 
>>>> Hi,
> 
>>>> you shouldn't touch that contact, there is no need to change the
> username, cause that's the username/contact of LB.
> 
>>>> 
> 
>>>> Daniel
> 
>>>> 
> 
>>>> 
> 
>>>> On 02/07/2014 10:19 AM, Martin Stix wrote:
> 
>>>>> Hi!
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> How can I change incoming contact for calls going to subscribers to
> 
>>>>> use the subscriber name instead of ngcp-lb?
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> Thanks
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> mit freundlichen Grüßen
> 
>>>>> best regards
> 
>>>>> 
> 
>>>>> *Martin Stix*
> 
>>>>> 
> 
>>>>> CEO
> 
>>>>> pluteus communication solutions
> 
>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
> 
>>>>> 
> 
>>>>> www.pluteus.at <http://www.pluteus.at>
> 
>>>>> 
> 
>>>>> Dampfsägestraße 17
> 
>>>>> 3300 Amstetten
> 
>>>>> Austria
> 
>>>>> tel.: +43 7472 28165 20
> 
>>>>> fax.: +43 7472 28165 22
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> 
> 
>>>>> _______________________________________________
> 
>>>>> Spce-user mailing list
> 
>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> 
>>>>> http://lists.sipwise.com/listinfo/spce-user
> 
>>>>> 
> 
>>>> 
> 
>>>> _______________________________________________
> 
>>>> Spce-user mailing list
> 
>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
> 
>>>> http://lists.sipwise.com/listinfo/spce-user
> 
>>>> 
>

More information about the Spce-user mailing list