[Spce-user] Use subscriber name as contact for incoming calls

[Daniel Grotti]

Hi,
Ah, no, you should set the Peering preferences not subscriber.

Daniel


On 04/07/2014 12:08 PM, Daniel Grotti wrote:
> Hi Martin,
> can you provide the kamailio-proxy.log fro this callid ?
> 
> Daniel
> 
> 
> 
> On 04/07/2014 12:00 PM, Martin Stix wrote:
>> Hi Daniel!
>>
>>  
>>
>> I've set the subscriber outbound pai user to authentication user
>>
>>  
>>
>> In Wireshark on my PBX I don’t see PAI coming.
>>
>>  
>>
>> Tried to call from my mobile to my pbx.
>>
>>  
>>
>> Regards
>>
>>  
>>
>>  
>>
>> mit freundlichen Grüßen
>>
>> best regards
>>
>> Martin Stix
>>
>> CEO
>>
>> pluteus communication solutions
>>
>> ms at pluteus.at
>>
>> www.pluteus.at
>>
>> Dampfsägestraße 17
>>
>> 3300 Amstetten
>>
>> Austria
>>
>> tel.: +43 7472 28165 20
>>
>> fax.: +43 7472 28165 22
>>
>>  
>>
>> -----Ursprüngliche Nachricht-----
>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>> Gesendet: Montag, 07. April 2014 11:42
>> An: Martin Stix
>> Cc: spce-user at lists.sipwise.com
>> Betreff: Re: AW: AW: AW: [Spce-user] Use subscriber name as contact for
>> incoming calls
>>
>>  
>>
>> Hi Martin,
>>
>> we currently do not set RPID header for outbound calls, we can just read
>> an RPID header for incoming calls setting inbound_upn or inbound_npn.
>>
>>  
>>
>> What you can use is the PAI, you can set the "outbound_pai_user" value
>> in SIP Peering/Subscriber Preferences.
>>
>>  
>>
>>  
>>
>> Daniel
>>
>>  
>>
>>  
>>
>>  
>>
>>  
>>
>>  
>>
>> On 04/07/2014 11:21 AM, Martin Stix wrote:
>>
>>> Hi!
>>
>>>
>>
>>> Could I use Remote Party ID for that, and if yes, how?
>>
>>> I don't mind the place where subscriber ID is being sent, except from
>> user part.
>>
>>>
>>
>>> Thanks
>>
>>>
>>
>>>
>>
>>> mit freundlichen Grüßen
>>
>>> best regards
>>
>>> Martin Stix
>>
>>> CEO
>>
>>> pluteus communication solutions
>>
>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>
>>> www.pluteus.at <http://www.pluteus.at>
>>
>>> Dampfsägestraße 17
>>
>>> 3300 Amstetten
>>
>>> Austria
>>
>>> tel.: +43 7472 28165 20
>>
>>> fax.: +43 7472 28165 22
>>
>>>
>>
>>> -----Ursprüngliche Nachricht-----
>>
>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>
>>> Gesendet: Dienstag, 01. April 2014 12:08
>>
>>> An: Martin Stix
>>
>>> Cc: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>>
>>> Betreff: Re: AW: AW: [Spce-user] Use subscriber name as contact for
>>
>>> incoming calls
>>
>>>
>>
>>> Hi Martin,
>>
>>>
>>
>>> this is something you can't achieve.
>>
>>> It's not the contact the header to use as source identifier, but From
>> or P-Asserted-Identity.
>>
>>> Contact header can't be changed.
>>
>>> Contact header is used as RURI in ACK and BYE, so if you change that
>> that messeges will be sent to the wrong URI. They must be sent back to
>> NGCP LB.
>>
>>>
>>
>>> Daniel
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>> On 04/01/2014 12:02 PM, Martin Stix wrote:
>>
>>>> Hi!
>>
>>>>
>>
>>>> Sorry, other way round, I have a 3CX PBX registered as subscriber on
>> sipwise.
>>
>>>> When a call is made from PSTN to Sipwise to 3CX PBX it would be great
>> to have the contact of the subscriber in contact field, and not ngcp-lb.
>>
>>>> So it makes live easier for us writing templates for 3CX and roll it
>> out to customers, because 3CX accepts the call in that case without
>> having the customer doing some source identifiers and stuff in the 3CX.
>> It is mainly because one customer on one subscriber can have more than 1
>> number. So we use the contact as source identifier.
>>
>>>>
>>
>>>> regards
>>
>>>>
>>
>>>>
>>
>>>> mit freundlichen Grüßen
>>
>>>> best regards
>>
>>>> Martin Stix
>>
>>>> CEO
>>
>>>> pluteus communication solutions
>>
>>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>
>>>> www.pluteus.at <http://www.pluteus.at>
>>
>>>> Dampfsägestraße 17
>>
>>>> 3300 Amstetten
>>
>>>> Austria
>>
>>>> tel.: +43 7472 28165 20
>>
>>>> fax.: +43 7472 28165 22
>>
>>>>
>>
>>>> -----Ursprüngliche Nachricht-----
>>
>>>> Von: Daniel Grotti [mailto:dgrotti at sipwise.com]
>>
>>>> Gesendet: Dienstag, 01. April 2014 11:57
>>
>>>> An: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>>
>>>> Cc: Martin Stix
>>
>>>> Betreff: Re: AW: [Spce-user] Use subscriber name as contact for
>>
>>>> incoming calls
>>
>>>>
>>
>>>> Hi Martin,
>>
>>>> if you want to authenticate incoming calls from a sip trunk
>> (something we don't do) you have to register your siptrunk as subscriber
>> on NGCP.
>>
>>>> We don't authenticate incoming calls from Peering servers.
>>
>>>>
>>
>>>> Daniel
>>
>>>>
>>
>>>>
>>
>>>>
>>
>>>>
>>
>>>>
>>
>>>>
>>
>>>>
>>
>>>> On 03/31/2014 05:54 PM, Martin Stix wrote:
>>
>>>>> Hi Daniel!
>>
>>>>>
>>
>>>>> It just would be nice to authenticate incoming calls via this
>> contact, in case of siptrunks with more than one main number, instead of
>> using IP or domain on pbx's.
>>
>>>>> Would there be a way?
>>
>>>>>
>>
>>>>> Regards
>>
>>>>>
>>
>>>>>
>>
>>>>> mit freundlichen Grüßen
>>
>>>>> best regards
>>
>>>>> Martin Stix
>>
>>>>> CEO
>>
>>>>> pluteus communication solutions
>>
>>>>> ms at pluteus.at <mailto:ms at pluteus.at>
>>
>>>>> www.pluteus.at <http://www.pluteus.at>
>>
>>>>> Dampfsägestraße 17
>>
>>>>> 3300 Amstetten
>>
>>>>> Austria
>>
>>>>> tel.: +43 7472 28165 20
>>
>>>>> fax.: +43 7472 28165 22
>>
>>>>>
>>
>>>>> -----Ursprüngliche Nachricht-----
>>
>>>>> Von: spce-user-bounces at lists.sipwise.com
>> <mailto:spce-user-bounces at lists.sipwise.com>
>>
>>>>> [mailto:spce-user-bounces at lists.sipwise.com] Im Auftrag von Daniel
>>
>>>>> Grotti
>>
>>>>> Gesendet: Freitag, 07. Februar 2014 13:21
>>
>>>>> An: spce-user at lists.sipwise.com <mailto:spce-user at lists.sipwise.com>
>>
>>>>> Betreff: Re: [Spce-user] Use subscriber name as contact for incoming
>>
>>>>> calls
>>
>>>>>
>>
>>>>> Hi,
>>
>>>>> you shouldn't touch that contact, there is no need to change the
>> username, cause that's the username/contact of LB.
>>
>>>>>
>>
>>>>> Daniel
>>
>>>>>
>>
>>>>>
>>
>>>>> On 02/07/2014 10:19 AM, Martin Stix wrote:
>>
>>>>>> Hi!
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>> How can I change incoming contact for calls going to subscribers to
>>
>>>>>> use the subscriber name instead of ngcp-lb?
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>> Thanks
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>> mit freundlichen Grüßen
>>
>>>>>> best regards
>>
>>>>>>
>>
>>>>>> *Martin Stix*
>>
>>>>>>
>>
>>>>>> CEO
>>
>>>>>> pluteus communication solutions
>>
>>>>>> ms at pluteus.at <mailto:ms at pluteus.at> <mailto:ms at pluteus.at>
>>
>>>>>>
>>
>>>>>> www.pluteus.at <http://www.pluteus.at>
>>
>>>>>>
>>
>>>>>> Dampfsägestraße 17
>>
>>>>>> 3300 Amstetten
>>
>>>>>> Austria
>>
>>>>>> tel.: +43 7472 28165 20
>>
>>>>>> fax.: +43 7472 28165 22
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>>
>>
>>>>>> _______________________________________________
>>
>>>>>> Spce-user mailing list
>>
>>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>
>>>>>> http://lists.sipwise.com/listinfo/spce-user
>>
>>>>>>
>>
>>>>>
>>
>>>>> _______________________________________________
>>
>>>>> Spce-user mailing list
>>
>>>>> Spce-user at lists.sipwise.com <mailto:Spce-user at lists.sipwise.com>
>>
>>>>> http://lists.sipwise.com/listinfo/spce-user
>>
>>>>>
>>