[Spce-user] One way speech with SPCE 3.2

[Tabi Tabe Tabi]

Thanks Andrew.

My SPCE is deployed behind NAT and I will make the change as recommended
and test. Will feedback after testing.

I am new to SPCE so learning quite a bit.

Much appreciated.

Tabi


On Tue, Apr 15, 2014 at 11:01 AM, Andrew Pogrebennyk <
apogrebennyk at sipwise.com> wrote:

> If the SPCE is deployed behind NAT with port forwarding you should
> configure your public IP address as advertised IP:
> ngcp-network --set-interface=eth0 --advertised-ip=x.y.z.w
> ngcpcfg apply
>
> Regards,
> Andrew
>
> On 04/15/2014 10:40 AM, Tabi Tabe Tabi wrote:
> > Hi,
> >
> > I am getting one way speech when I make or receive inbound call. The
> > receiving SBC gets SDP connection info with my private IP address and
> > tries to send media to it. I suspect this could be the problem. Is there
> > any way I can modify the Sipwise config to send my public IP address
> > instead of private? I am using a single NIC on the server.
> >
> > Regards,
> >
> > --
> > ...Tabi
>
>


-- 
...Tabi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20140415/b8a348d5/attachment-0001.html>