[Spce-user] Rtp proxy

[Kevin Masse]

Jeremie thanks for raising a very good question.  Here are some of my
tests.

*	I set Domain Level Never rtpproxy
o	Results: tested PBX, audio is ok to IVR with ON NET calls
o	No audio to IVR on OFF NET calls from the cell phone

*	I set Domain Level to USE RTPPROXY & SUBSCRIBER Preferences is
set to Never rtpproxy
o	Results: tested PBX, audio is ok to IVR with ON NET calls
o	No audio to IVR on OFF NET calls from the cell phone

I also would like to see a way to make sure we are not passing audio
when there is only a SIP Trunk to a subscriber directly to their PBX.

The above test was our SIPWISE 2.8 latest and our subscriber with a PBX
on a public IP.


If there is a better way to test this I will be happy to produce our
results.

I think perhaps just a clear answer or a suggestion on the best
configuration would be great

Thanks
Kevin



-----Original Message-----
From: spce-user-bounces at lists.sipwise.com
[mailto:spce-user-bounces at lists.sipwise.com] On Behalf Of Jeremie Chism
Sent: Wednesday, February 19, 2014 2:17 PM
To: Spce-user
Subject: [Spce-user] Rtp proxy

I noticed there are several places to disable rtp proxy. At the domain,
at the peer, at the subscriber. I was thinking that if I am sending a
sip trunk to a subscriber that I would choose never at the subscriber
but I am getting mixed results. Knowing that the subscriber of a sip
trunk has a public ip and there is no reason to proxy the audio where
should this be disabled. 

Sent from my iPhone
_______________________________________________
Spce-user mailing list
Spce-user at lists.sipwise.com
http://lists.sipwise.com/listinfo/spce-user