[Spce-user] Connection to private subnet for single carrier

[George Mason]

Hi Andrew

Many thanks, unfortunately in this case the provider will do nothing
over the public network, so both SIP signalling and RTP need to be sent
over the private interface. On balance I think I will wait for mr3.5.1
as that sounds like it addresses the problem with the least messing about.

*George Mason**
Technical Director*

<http://www.xoomtalk.com> 	*Tel:
Mob:
Fax:
Web:* 	+44 (0)1273 900090
+44 (0)7966 403353
+44 (0)1273 900091
www.xoomtalk.com <http://www.xoomtalk.com/>

On 14/10/14 13:54, Andrew Pogrebennyk wrote:
> Hi George,
>
> you should configure that interface as extra_socket in config.yml:
> https://www.sipwise.com/doc/mr3.4.2/spce/ar01s05.html#_extra_sip_listening_ports
>
> After that select that socket in the outbound_socket peer preference.
> Please note that the rtpengine is still going to use the default
> interface. This is not a problem I guess if the carrier is able to send
> RTP traffic to the internet.
>
> If not you need to look into the new rtpengine interface bridging
> feature. It's available and documented on
> https://github.com/sipwise/rtpengine and will be included in mr3.5.1
> that will be released within a week. The integration in kamailio config
> is rather trivial.
>
> Andrew
>
> On 13/10/14 15:23, George Mason wrote:
>> Hi,
>>
>> I have a situation where I need to connect a separate interface on a
>> SPCE box with a private IP, to a carrier that will only accept calls
>> down this channel and from that IP. So basically I need a setup where
>> the server is accessible on its public IP on one interface, but can also
>> communicate on its private interface, with a route to the supplier's
>> network.
>>
>> What will need to be done on SPCE to make this work? I'm fine with the
>> layer 3 aspect of this but not sure about the changes needed in the
>> application.
>>
>> Thanks in advance
>>
>> George

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20141014/2422d787/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xoomtalk-email-logo.jpg
Type: image/jpeg
Size: 24096 bytes
Desc: not available
URL: <http://lists.sipwise.com/pipermail/spce-user_lists.sipwise.com/attachments/20141014/2422d787/attachment-0001.jpg>